Search

Unequivocal change in the climate system has put coastal regions around the world at increasing risk from climate-related hazards. Monitoring the coast is often difficult and expensive, resulting in sparse monitoring equipment lacking in sufficient temporal and spatial coverage. Thus, low-cost methods to monitor the coast at finer temporal and spatial resolution are imperative for climate resilience along the world's coasts. Exploiting such low-cost methods for the development of early warning support could be invaluable to coastal settlements. This paper aims to provide the most up-to-date low-cost techniques developed and used in the last decade for monitoring coastal hazards and their forcing agents via systematic review of the peer-reviewed literature in three scientific databases: Scopus, Web of Science and ScienceDirect. A total of 60 papers retrieved from these databases through the preferred reporting items for systematic reviews and meta-analyses (PRISMA) protocol were analysed in detail to yield different categories of low-cost sensors. These sensors span the entire domain for monitoring coastal hazards, as they focus on monitoring coastal zone characteristics (e.g., topography), forcing agents (e.g., water levels), and the hazards themselves (e.g., coastal flooding). It was found from the meta-analysis of the retrieved papers that terrestrial photogrammetry, followed by aerial photogrammetry, was the most widely used technique for monitoring different coastal hazards, mainly coastal erosion and shoreline change. Different monitoring techniques are available to monitor the same hazard/forcing agent, for instance, unmanned aerial vehicles (UAVs), time-lapse cameras, and wireless sensor networks (WSNs) for monitoring coastal morphological changes such as beach erosion, creating opportunities to not only select but also combine different techniques to meet specific monitoring objectives. The sensors considered in this paper are useful for monitoring the most pressing challenges in coastal zones due to the changing climate. Such a review could be extended to encompass more sensors and variables in the future due to the systematic approach of this review. This study is the first to systematically review a wide range of low-cost sensors available for the monitoring of coastal zones in the context of changing climate and is expected to benefit coastal researchers and managers to choose suitable low-cost sensors to meet their desired objectives for the regular monitoring of the coast to increase climate resilience. [ABSTRACT FROM AUTHOR]

This paper delves into the application of vibration-based energy harvesting to power environmental sensor nodes, a critical component of modern data collection systems. These sensor nodes play a crucial role in structural health monitoring, providing essential data on external conditions that can affect the health and performance of structures. We investigate the feasibility and efficiency of utilizing piezoelectric vibration energy harvesters to sustainably power environmental wireless sensor nodes on the one hand. On the other hand, we exploit different approaches to minimize the sensor node's power consumption and maximize its efficiency. The investigations consider various sensor node platforms and assess their performance under different voltage levels and broadcast frequencies. The findings reveal that optimized harvester designs enable real-time data broadcasting with short intervals, ranging from 1 to 3 s, expanding the horizons of environmental monitoring, and show that in case the system includes a battery as a backup plan, the battery's lifetime can be extended up to 9 times. This work underscores the potential of vibration energy harvesting as a viable solution for powering sensor nodes, enhancing their autonomy, and reducing maintenance costs in remote and challenging environments. It opens doors to broader applications of sustainable energy sources in environmental monitoring and data collection systems. [ABSTRACT FROM AUTHOR]

In recent years, passive wireless sensors have been studied for various infrastructure sectors, making them a research and development focus. While substantial evidence already supports their viability, further effort is needed to understand their dependability and applicability. As a result, issues related to the theory and implementation of wireless sensors still need to be resolved. This paper aims to review and summarize the progress of the different materials used in different passive sensors, the current status of the passive wireless sensor readout devices, and the latest peripheral devices. It will also cover other related aspects such as the system equipment of passive wireless sensors and the nanogenerators for the energy harvesting for self-powered sensors for applications in contemporary life scenarios. At the same time, the challenges for future developments and applications of passive wireless are discussed. [ABSTRACT FROM AUTHOR]

The development of Wireless Underground Sensor Networks (WUSNs) is a recent research axis based on sensor nodes buried a few dozen centimeters deep. The communication ranges are, however, highly reduced due to the high attenuation of electromagnetic waves in soil, leading to issues of data collection. This paper proposes to embed a data collector on an Unmanned Aerial Vehicle (UAV) coming close to each buried sensor node. The whole system was developed (sensor nodes, data collector, gateway) and experimentations were carried out in real conditions. In hovering mode, the measurements on the RSSI levels with respect to the position of the UAV highlight the interest in maintaining a high altitude when the UAV is far from the node. In dynamic mode, the experimental results demonstrate the feasibility of carrying out the data collection task while the UAV is moving. The speed of the UAV has, however, to be adapted to the required time to collect the data. In the case of numerous buried sensor nodes, evolutionary algorithms are implemented to plan the trajectory of the UAV optimally. To the best of our knowledge, this paper is the first one that reports experiment results combining WUSN and UAV technologies. [ABSTRACT FROM AUTHOR]

Complex systems involve monitoring, assessing, and predicting the health of various systems within an integrated vehicle health management (IVHM) system or a larger system. Health management applications rely on sensors that generate useful information about the health condition of the assets; thus, optimising the sensor network quality while considering specific constraints is the first step in assessing the condition of assets. The optimisation problem in sensor networks involves considering trade-offs between different performance metrics. This review paper provides a comprehensive guideline for practitioners in the field of sensor optimisation for complex systems. It introduces versatile multi-perspective cost functions for different aspects of sensor optimisation, including selection, placement, data processing and operation. A taxonomy and concept map of the field are defined as valuable navigation tools in this vast field. Optimisation techniques and quantification approaches of the cost functions are discussed, emphasising their adaptability to tailor to specific application requirements. As a pioneering contribution, all the relevant literature is gathered and classified here to further improve the understanding of optimal sensor networks from an information-gain perspective. [ABSTRACT FROM AUTHOR]

Rockfalls and landslide events are caused by different factors among which are included geomorphological and climatic factors and also human interaction. Therefore, the economic and social impacts can be significant and the remote monitoring of such hazards has become an essential topic in various applications. Wireless sensor networks (WSNs) are well suited for the deployment of monitoring systems, benefiting from the different technologies and topologies that are available and evolving nowadays. This review paper aims to summarize and overview the up-to-date state of the art of rockfall and landslide monitoring systems based on WSNs. The implementation and methods were analyzed for each solution, along with the system architecture and relevant hardware aspects. All the retrieved data were used to analyze the current trends and future possibilities in the field of WSN geohazard monitoring. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) have been commonly utilized in event detection and environmental observation applications. The main aim of event detection is to define the presence or absence of an event. Various existing studies in the field of event detection depend on static or threshold values to reveal the occurrence of an event, which can result in imprecise sensor readings. Recently, many studies have utilized fuzzy logic to treat fluctuating sensor readings; as a result, they have decreased the number of false alarms created. However, there is some attention required when utilizing fuzzy logic. One aspect is that the efficiency and accuracy of the fuzzy membership function can be impacted by the utilization of heterogeneous sensors, which may increase the complexity of the fuzzy logic operation as the number of inputs rises. To address these issues, this paper proposes an approach named Probabilistic Collaborative Event Detection (PCED), which is a hybrid event detection technique that is based on a cluster WSN topology. The PCED approach utilizes a validated probabilistic technique for heterogeneous sensor nodes to transform sensing values into probability formulas and introduces a Cluster Head Decision Mechanism to make decisions based on the aggregated data from the sensors. The proposed approach employs fuzzy logic at the fusion center level to enhance the precision of event detection. The effectiveness of this method is thoroughly evaluated using MATLAB software, demonstrating an improvement in the probability of detection and a decrease in the probability of false alarms. PCED is compared to well-established event detection mechanisms such as the REFD mechanism. The results show that PCED reduces the occurrence of false alarms from 37 to 3 in certain scenarios, while improving detection accuracy by up to 19.4% over REDF and decreasing detection latency by up to 17.5%. [ABSTRACT FROM AUTHOR]

The complexity of the underwater environment enables significant energy consumption of sensor nodes for communication with base stations in underwater wireless sensor networks (UWSNs), and the energy consumption of nodes in different water depths is unbalanced. How to improve the energy efficiency of sensor nodes and meanwhile balance the energy consumption of nodes in different water depths in UWSNs are thus urgent concerns. Therefore, in this paper, we first propose a novel hierarchical underwater wireless sensor transmission (HUWST) framework. We then propose a game-based, energy-efficient underwater communication mechanism in the presented HUWST. It improves the energy efficiency of the underwater sensors personalized according to the various water depth layers of sensor locations. In particular, we integrate the economic game theory in our mechanism to trade off variations in communication energy consumption due to sensors in different water depth layers. Mathematically, the optimal mechanism is formulated as a complex nonlinear integer programming (NIP) problem. A new energy-efficient distributed data transmission mode decision algorithm (E-DDTMD) based on the alternating direction method of multipliers (ADMM) is thus further proposed to tackle this sophisticated NIP problem. The systematic simulation results demonstrate the effectiveness of our mechanism in improving the energy efficiency of UWSNs. Moreover, our presented E-DDTMD algorithm achieves significantly superior performance to the baseline schemes. [ABSTRACT FROM AUTHOR]

In dense IoT deployments of wireless sensor networks (WSNs), sensor placement, coverage, connectivity, and energy constraints determine the overall network lifetime. In large-size WSNs, it is difficult to maintain a trade-off among these conflicting constraints and, thus, scaling is difficult. In the related research literature, various solutions are proposed that attempt to address near-optimal behavior in polynomial time, the majority of which relies on heuristics. In this paper, we formulate a topology control and lifetime extension problem regarding sensor placement, under coverage and energy constraints, and solve it by applying and testing several neural network configurations. To do so, the neural network dynamically proposes and handles sensor placement coordinates in a 2D plane, having the ultimate goal to extend network lifetime. Simulation results show that our proposed algorithm improves network lifetime, while maintaining communication and energy constraints, for medium- and large-scale deployments. [ABSTRACT FROM AUTHOR]

The principal goal of this study is to analyze the evolution of sensor research and technologies from 1990 to 2020 to clarify outlook and future directions. This paper applies network analysis to a large dataset of publications concerning sensor research covering a 30-year period. Results show that the evolution of sensors is based on growing scientific interactions within networks, between different research fields that generate co-evolutionary pathways directed to develop general-purpose and/or specialized technologies, such as wireless sensors, biosensors, fiber-optic, and optical sensors, having manifold applications in industries. These results show new directions of sensor research that can drive R&D investments toward promising technological trajectories of sensors, exhibiting a high potential of growth to support scientific, technological, industrial, and socioeconomic development. [ABSTRACT FROM AUTHOR]

The widespread use of the Internet of Things makes it relevant to use public IP networks for simultaneous access by both users and wireless sensors. To achieve this, a significant reduction in the subscriber devices' energy consumption is required. This paper analyzes the application features of the collective dynamic routing method both with and without the use of a robust method for estimating the channel data rate for sensors' communication in wireless public networks. Based on the analysis, a novel modification of the collective dynamic routing method has been developed that reduces the sensors' energy consumption while keeping a high data rate and short delivery time for users. An analysis of the network load, the total data transfer rate over the network, and the parameters affecting the sensors' energy consumption was carried out for a segment of a seamless IEEE 802.11ax network. The simulation demonstrated a high efficiency of using a novel modification of the collective dynamic routing method for access to users and wireless sensors. [ABSTRACT FROM AUTHOR]

In this paper, the implementation of a Wireless Sensor Network (WSN) for environmental monitoring (EM) is presented. It includes the design, implementation and experimental characterization of a multi-sector base station (BS) antenna composed of several microstrip Quasi-Yagi elements and the implementation and experimental characterization of a reduced form factor antenna for the sensor nodes (SN). Subsequently, it reports the implementation of a WSN based on Lopy4 transceivers, using the developed BS and SN antennas. Finally, experimental results obtained on the field to evaluate the performance of the network in terms of maximum coverage distance and coverage area are presented. According to the field tests, the connectivity between the sensor nodes and the developed WSN base station is confirmed at distances above 3.5 km and for all the antenna sectors of the multi-sector BS attaining a 360 ° of field of view. [ABSTRACT FROM AUTHOR]

In wireless sensor network (WSN)-based rigid body localization (RBL) systems, the non-line-of-sight (NLOS) propagation of the wireless signals leads to severe performance deterioration. This paper focuses on the RBL problem under the NLOS environment based on the time of arrival (TOA) measurement between the sensors fixed on the rigid body and the anchors, where the NLOS parameters are estimated to improve the RBL performance. Without any prior information about the NLOS environment, the highly non-linear and non-convex RBL problem is transformed into a difference of convex (DC) programming, which can be solved by using the concave–convex procedure (CCCP) to determine the position of the rigid body sensors and the NLOS parameters. To avoid error accumulation, the obtained NLOS parameters are utilized to refine the localization performance of the rigid body sensors. Then, the accurate position and the orientation of the rigid body in two-Dimensional space are obtained according to the relative deflection angle method. To reduce the computational complexity, the singular value decomposition (SVD) method is employed to solve the problem in three-Dimensional space. Simulation results show that the proposed method can effectively improve the performance of the rigid body localization based on the wireless sensor network in NLOS environment. [ABSTRACT FROM AUTHOR]

The paper analyses the autonomy of a wireless body sensor that continuously measures the potential difference between two proximal electrodes on the skin, primarily used for measuring an electrocardiogram (ECG) when worn on the torso. The sensor is powered by a small rechargeable battery and is designed for extremely low power use. However, the autonomy of the sensor, regarding its power consumption, depends significantly on the measurement quality selection, which directly influences the amount of data transferred. Therefore, we perform an in-depth analysis of the power consumption sources, particularly those connected with the Bluetooth Low Energy (BLE) communication protocol, in order to model and then tune the autonomy of the wireless low-power body sensor for long-term ECG monitoring. Based on the findings, we propose two analytical models for power consumption: one for power consumption estimation in idle mode and the other one for power estimation in active mode. The proposed models are validated with the measured power consumption of the ECG sensor at different ECG sensor settings, such as sampling rate and transmit power. The proposed models show a good fit to the measured power consumption at different ECG sensor sampling rates. This allows for power consumption analysis and sensor autonomy predictions for different sensor settings. Moreover, the results show that the transmit power has a negligible effect on the sensor autonomy in the case of streaming data with high sampling rates. The most energy can be saved by lowering the sampling rate with suitable connection interval and by packing as much data as possible in a single BLE packet. [ABSTRACT FROM AUTHOR]

Since the power of transmitting one-bit data is higher than that of computing one thousand lines of code in IoT (Internet of Things) applications, it is very important to reduce communication costs to save battery power and prolong system lifetime. In IoT sensors, the transformation of physical phenomena to data is usually with distortion (bounded-error tolerance). It introduces bounded-error data in IoT applications according to their required QoS2 (quality-of-sensor service) or QoD (quality-of-decision making). In our previous work, we proposed a bounded-error data compression scheme called BESDC (Bounded-Error-pruned Sensor Data Compression) to reduce the point-to-point communication cost of WSNs (wireless sensor networks). Based on BESDC, this paper proposes an online bounded-error query (OBEQ) scheme with edge computing to handle the entire online query process. We propose a query filter scheme to reduce the query commands, which will inform WSN to return unnecessary queried data. It not only satisfies the QoS2/QoD requirements, but also reduces the communication cost to request sensing data. Our experiments use real data of WSN to demonstrate the query performance. Results show that an OBEQ with a query filter can reduce up to 88% of the communication cost when compared with the traditional online query process. [ABSTRACT FROM AUTHOR]

This paper proposes a business model for providing services based on the Internet of Things through a platform that intermediates between human users andWireless Sensor Networks (WSNs). The platform seeks to maximize its profit through posting both the price charged to each user and the price paid to each WSN. A complete analysis of the profit maximization problem is performed in this paper. We show that the service provider maximizes its profit by incentivizing all users and allWireless Sensor Infrastructure Providers (WSIPs) to join the platform. This is true not only when the number of users is high, but also when it is moderate, provided that the costs that the users bear do not trespass a cost ceiling. This cost ceiling depends on the number of WSIPs, on the value of the intrinsic value of the service and on the externality that the WSIP has on the user utility. [ABSTRACT FROM AUTHOR]

Moving target tracking in wireless sensor networks is of paramount importance. This paper considers the problem of state estimation for L-sensor linear dynamic systems. Firstly, the paper establishes the fuzzy model for measurement condition estimation. Then, Generalized Kalman Filter design is performed to incorporate the novel neighborhood function and the target motion information, improving with an increasing number of active sensors. The proposed measurement selection approach has some advantages in time cost. As such, if the desired accuracy has been achieved, the parameter initialization for optimization can be readily resolved, which maximizes the expected lifespan while preserving tracking accuracy. Through theoretical justifications and empirical studies, we demonstrate that the proposed scheme achieves substantially superior performances over conventional methods in terms of moving target tracking under the resource-constrained wireless sensor networks. [ABSTRACT FROM AUTHOR]

Secure and accurate data fusion is an important issue in wireless sensor networks (WSNs) and has been extensively researched in the literature. In this paper, by combining clustering techniques, reputation and trust systems, and data fusion algorithms, we propose a novel cluster-based data fusion model called Double Cluster Heads Model (DCHM) for secure and accurate data fusion in WSNs. Different from traditional clustering models in WSNs, two cluster heads are selected after clustering for each cluster based on the reputation and trust system and they perform data fusion independently of each other. Then, the results are sent to the base station where the dissimilarity coefficient is computed. If the dissimilarity coefficient of the two data fusion results exceeds the threshold preset by the users, the cluster heads will be added to blacklist, and the cluster heads must be reelected by the sensor nodes in a cluster. Meanwhile, feedback is sent from the base station to the reputation and trust system, which can help us to identify and delete the compromised sensor nodes in time. Through a series of extensive simulations, we found that the DCHM performed very well in data fusion security and accuracy. [ABSTRACT FROM AUTHOR]

Privacy-preserving data aggregation in wireless sensor networks (WSNs) with mobile nodes is a challenging problem, as an accurate aggregation result should be derived in a privacy-preserving manner, under the condition that nodes are mobile and have no pre-specified keys for cryptographic operations. In this paper, we focus on the SUM aggregation function and propose two privacy-preserving data aggregation protocols for two-tiered sensor networks with mobile nodes: Privacy-preserving Data Aggregation against non-colluded Aggregator and Sink (PDAAS) and Privacy-preserving Data Aggregation against Colluded Aggregator and Sink (PDACAS). Both protocols guarantee that the sink can derive the SUM of all raw sensor data but each sensor's raw data is kept confidential. In PDAAS, two keyed values are used, one shared with the sink and the other shared with the aggregator. PDAAS can protect the privacy of sensed data against external eavesdroppers, compromised sensor nodes, the aggregator or the sink, but fails if the aggregator and the sink collude. In PDACAS, multiple keyed values are used in data perturbation, which are not shared with the aggregator or the sink. PDACAS can protect the privacy of sensor nodes even the aggregator and the sink collude, at the cost of a little more overhead than PDAAS. Thorough analysis and experiments are conducted, which confirm the efficacy and efficiency of both schemes. [ABSTRACT FROM AUTHOR]

In a network, a distributed consensus algorithm is fully characterized by its weighting matrix. Although there exist numerical methods for obtaining the optimal weighting matrix, we have not found an in-network implementation of any of these methods that works for all network topologies. In this paper, we propose an in-network algorithm for finding such an optimal weighting matrix [ABSTRACT FROM AUTHOR]

Due to the increasingly important role in monitoring and data collection that sensors play, accurate and timely fault detection is a key issue for wireless sensor networks (WSNs) in smart grids. This paper presents a novel distributed fault detection mechanism for WSNs based on credibility and cooperation. Firstly, a reasonable credibility model of a sensor is established to identify any suspicious status of the sensor according to its own temporal data correlation. Based on the credibility model, the suspicious sensor is then chosen to launch fault diagnosis requests. Secondly, the sending time of fault diagnosis request is discussed to avoid the transmission overhead brought about by unnecessary diagnosis requests and improve the efficiency of fault detection based on neighbor cooperation. The diagnosis reply of a neighbor sensor is analyzed according to its own status. Finally, to further improve the accuracy of fault detection, the diagnosis results of neighbors are divided into several classifications to judge the fault status of the sensors which launch the fault diagnosis requests. Simulation results show that this novel mechanism can achieve high fault detection ratio with a small number of fault diagnoses and low data congestion probability. [ABSTRACT FROM AUTHOR]

We study the problem of energy-efficient target tracking in underwater wireless sensor networks (UWSNs). Since sensors of UWSNs are battery-powered, it is impracticable to replace the batteries when exhausted. This means that the battery life affects the lifetime of the whole network. In order to extend the network lifetime, it is worth reducing the energy consumption on the premise of sufficient tracking accuracy. This paper proposes an energy-efficient filter that implements the tradeoff between communication cost and tracking accuracy. Under the distributed fusion framework, local sensors should not send their weak information to the fusion center if their measurement residuals are smaller than the pre-given threshold. In order to guarantee the target tracking accuracy, artificial measurements are generated to compensate for those unsent real measurements. Then, an adaptive scheme is derived to take full advantages of the artificial measurements-based filter in terms of energy-efficiency. Furthermore, a computationally efficient optimal sensor selection scheme is proposed to improve tracking accuracy on the premise of employing the same number of sensors. Simulation demonstrates that our scheme has superior advantages in the tradeoff between communication cost and tracking accuracy. It saves much energy while loosing little tracking accuracy or improves tracking performance with less additional energy cost. [ABSTRACT FROM AUTHOR]

There has been a significant increase in the proliferation and implementation of Wireless Sensor Networks (WSNs) in different disciplines, including the monitoring of maritime environments, healthcare systems, and industrial sectors. It has now become critical to address the security issues of data communication while considering sensor node constraints. There are many proposed schemes, including the scheme being proposed in this paper, to ensure that there is a high level of security in WSNs. This paper presents a symmetric security scheme for a maritime coastal environment monitoring WSN. The scheme provides security for travelling packets via individually encrypted links between authenticated neighbors, thus avoiding a reiteration of a global rekeying process. Furthermore, this scheme proposes a dynamic update key based on a trusted node configuration, called a leader node, which works as a trusted third party. The technique has been implemented in real time on a Waspmote test bed sensor platform and the results from both field testing and indoor bench testing environments are discussed in this paper. [ABSTRACT FROM AUTHOR]

In this paper, we study the area coverage of directional sensor networks (DSNs) with random node distribution. The coverage of DSNs depends on the sensor's locations, the sensing radiuses, and the working directions, as well as the angle of view (AoV), which is challenging to analyze. We transform the network area coverage problem into cell coverage problems by exploiting the Voronoi diagram, which only needs to optimize local coverage for each cell in a decentralized way. To address the cell coverage problem, we propose three local coverage optimization algorithms to improve the cell coverage, namely Move Inside Cell Algorithm (MIC), RotateWorking Direction Algorithm (RWD) and Rotation based on boundary (RB), respectively. Extensive simulations are performed to prove the effectiveness of our proposed algorithms in terms of the coverage ratio. [ABSTRACT FROM AUTHOR]

In recent years, we have seen many applications of secure query in two-tiered wireless sensor networks. Storage nodes are responsible for storing data from nearby sensor nodes and answering queries from Sink. It is critical to protect data security from a compromised storage node. In this paper, the Communication-efficient Secure Range Query (CSRQ)--a privacy and integrity preserving range query protocol--is proposed to prevent attackers from gaining information of both data collected by sensor nodes and queries issued by Sink. To preserve privacy and integrity, in addition to employing the encoding mechanisms, a novel data structure called encrypted constraint chain is proposed, which embeds the information of integrity verification. Sink can use this encrypted constraint chain to verify the query result. The performance evaluation shows that CSRQ has lower communication cost than the current range query protocols. [ABSTRACT FROM AUTHOR]

Localization is one of the hottest research topics in Underwater Wireless Sensor Networks (UWSNs), since many important applications of UWSNs, e.g., event sensing, target tracking and monitoring, require location information of sensor nodes. Nowadays, a large number of localization algorithms have been proposed for UWSNs. How to improve location accuracy are well studied. However, few of them take location reliability or security into consideration. In this paper, we propose a Collaborative Secure Localization algorithm based on Trust model (CSLT) for UWSNs to ensure location security. Based on the trust model, the secure localization process can be divided into the following five sub-processes: trust evaluation of anchor nodes, initial localization of unknown nodes, trust evaluation of reference nodes, selection of reference node, and secondary localization of unknown node. Simulation results demonstrate that the proposed CSLT algorithm performs better than the compared related works in terms of location security, average localization accuracy and localization ratio. [ABSTRACT FROM AUTHOR]

This paper presents a new clustering protocol for designing energy-efficient hierarchical wireless sensor networks (WSNs) by dividing the distributed sensor network into virtual sensor groups to satisfy the scalability and prolong the network lifetime in large-scale applications. The proposed approach is a distributed clustering protocol called DCPVP, which is based on voting and priority ideas. In the DCPVP protocol, the size of clusters is based on the distance of nodes from the data link such as base station (BS) and the local node density. The cluster heads are elected based on the mean distance from neighbors, remaining energy and the times of being elected as cluster head. The performance of the DCPVP protocol is compared with some well-known clustering protocols in literature such as the LEACH, HEED, WCA, GCMRA and TCAC protocols. The simulation results confirm that the prioritizing- and voting-based election ideas decrease the construction time and the energy consumption of clustering progress in sensor networks and consequently improve the lifetime of networks with limited resources and battery powered nodes in harsh and inaccessible environments. [ABSTRACT FROM AUTHOR]

The Wireless Sensor Network similarity search problem has received considerable research attention due to sensor hardware imprecision and environmental parameter variations. Most of the state-of-the-art distributed data centric storage (DCS) schemes lack optimization for similarity queries of events. In this paper, a DCS scheme with metric based similarity searching (DCSMSS) is proposed. DCSMSS takes motivation from vector distance index, called iDistance, in order to transform the issue of similarity searching into the problem of an interval search in one dimension. In addition, a sector based distance routing algorithm is used to efficiently route messages. Extensive simulation results reveal that DCSMSS is highly efficient and significantly outperforms previous approaches in processing similarity search queries. [ABSTRACT FROM AUTHOR]

Wireless Sensor Networks constitute pervasive and distributed computing systems and are potentially one of the most important technologies of this century. They have been specifically identified as a good candidate to become an integral part of the protection of critical infrastructures. In this paper we focus on railway infrastructure protection and we present the details of a sensor platform designed to be integrated into a slab track system in order to carry out both installation and maintenance monitoring activities. In the installation phase, the platform helps operators to install the slab tracks in the right position. In the maintenance phase, the platform collects information about the structural health and behavior of the infrastructure when a train travels along it and relays the readings to a base station. The base station uses trains as data mules to upload the information to the internet. The use of a train as a data mule is especially suitable for collecting information from remote or inaccessible places which do not have a direct connection to the internet and require less network infrastructure. The overall aim of the system is to deploy a permanent economically viable monitoring system to improve the safety of railway infrastructures. [ABSTRACT FROM AUTHOR]

Future wireless sensor networks are expected to provide various sensing services and energy efficiency is one of the most important criterions. The node scheduling strategy aims to increase network lifetime by selecting a set of sensor nodes to provide the required sensing services in a periodic manner. In this paper, we are concerned with the service-oriented node scheduling problem to provide multiple sensing services while maximizing the network lifetime. We firstly introduce how to model the data correlation for different services by using Markov Random Field (MRF) model. Secondly, we formulate the service-oriented node scheduling issue into three different problems, namely, the multi-service data denoising problem which aims at minimizing the noise level of sensed data, the representative node selection problem concerning with selecting a number of active nodes while determining the services they provide, and the multi-service node scheduling problem which aims at maximizing the network lifetime. Thirdly, we propose a Multi-service Data Denoising (MDD) algorithm, a novel multi-service Representative node Selection and service Determination (RSD) algorithm, and a novel MRF-based Multi-service Node Scheduling (MMNS) scheme to solve the above three problems respectively. Finally, extensive experiments demonstrate that the proposed scheme efficiently extends the network lifetime. [ABSTRACT FROM AUTHOR]

The employment of mobile vehicles to charge sensors via wireless energy transfer is a promising technology to maintain the perpetual operation of wireless sensor networks (WSNs). Most existing studies assumed that sensors are powered with off-the-shelf batteries, e.g., Lithium batteries, which are cheap, but it takes some non-trivial time to fully charge such a battery (e.g., 30-80 min). The long charging time may incur long sensor dead durations, especially when there are many lifetime-critical sensors to be charged. On the other hand, other studies assumed that every sensor is powered with an ultra-fast charging battery, where it only takes some trivial time to replenish such a battery, e.g., 1 min, but the adoption of many ultra-fast sensors will bring about high purchasing cost. In this paper, we propose a novel heterogeneous sensor network model, in which there are only a few ultra-fast sensors and many low-cost off-the-shelf sensors. The deployment cost of the network in the model is low, as the number of ultra-fast sensors is limited. We also have an important observation that we can significantly shorten sensor dead durations by enabling the ultra-fast sensors to relay more data for lifetime-critical off-the-shelf sensors. We then propose a joint charging scheduling and routing allocation algorithm, such that the longest sensor dead duration is minimized. We finally evaluate the performance of the proposed algorithm through extensive simulation experiments. Experimental results show that the proposed algorithm is very promising and the longest sensor dead duration by it is only about 10% of those by existing algorithms. [ABSTRACT FROM AUTHOR]

A novel network paradigm of mobile edge computing, namely TMWSNs (two-tiered mobile wireless sensor networks), has just been proposed by researchers in recent years for its high scalability and robustness. However, only a few works have considered the security of TMWSNs. In fact, the storage nodes, which are located at the upper layer of TMWSNs, are prone to being attacked by the adversaries because they play a key role in bridging both the sensor nodes and the sink, which may lead to the disclosure of all data stored on them as well as some other potentially devastating results. In this paper, we make a comparative study on two typical schemes, EVTopk and VTMSN, which have been proposed recently for securing Top-k queries in TMWSNs, through both theoretical analysis and extensive simulations, aiming at finding out their disadvantages and advancements. We find that both schemes unsatisfactorily raise communication costs. Specifically, the extra communication cost brought about by transmitting the proof information uses up more than 40% of the total communication cost between the sensor nodes and the storage nodes, and 80% of that between the storage nodes and the sink. We discuss the corresponding reasons and present our suggestions, hoping that it will inspire the researchers researching this subject. [ABSTRACT FROM AUTHOR]

Energy consumption is a critical performance and user experience metric when developing mobile sensing applications, especially with the significantly growing number of sensing applications in recent years. As proposed a decade ago when mobile applications were still not popular and most mobile operating systems were single-tasking, conventional sensing paradigms such as opportunistic sensing and participatory sensing do not explore the relationship among concurrent applications for energy-intensive tasks. In this paper, inspired by social relationships among living creatures in nature, we propose a symbiotic sensing paradigm that can conserve energy, while maintaining equivalent performance to existing paradigms. The key idea is that sensing applications should cooperatively perform common tasks to avoid acquiring the same resources multiple times. By doing so, this sensing paradigm executes sensing tasks with very little extra resource consumption and, consequently, extends battery life. To evaluate and compare the symbiotic sensing paradigm with the existing ones, we develop mathematical models in terms of the completion probability and estimated energy consumption. The quantitative evaluation results using various parameters obtained from real datasets indicate that symbiotic sensing performs better than opportunistic sensing and participatory sensing in large-scale sensing applications, such as road condition monitoring, air pollution monitoring, and city noise monitoring. [ABSTRACT FROM AUTHOR]

The spreading of urban areas and the growth of human population worldwide raise societal and environmental concerns. To better address these concerns, the monitoring of the acoustic environment in urban as well as rural or wilderness areas is an important matter. Building on the recent development of low cost hardware acoustic sensors, we propose in this paper to consider a sensor grid approach to tackle this issue. In this kind of approach, the crucial question is the nature of the data that are transmitted from the sensors to the processing and archival servers. To this end, we propose an efficient audio coding scheme based on third octave band spectral representation that allows: (1) the estimation of standard acoustic indicators; and (2) the recognition of acoustic events at state-of-the-art performance rate. The former is useful to provide quantitative information about the acoustic environment, while the latter is useful to gather qualitative information and build perceptually motivated indicators using for example the emergence of a given sound source. The coding scheme is also demonstrated to transmit spectrally encoded data that, reverted to the time domain using state-of-the-art techniques, are not intelligible, thus protecting the privacy of citizens. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel microwave microfluidic sensor with dual-sensing capability. The sensor is based on a dual-mode resonator that consists of a folded microstrip line loaded with interdigital lines and a stub at the plane of symmetry. Due to the specific configuration, the resonator exhibits two entirely independent resonant modes, which allows simultaneous sensing of two fluids using a resonance shift method. The sensor is designed in a multilayer configuration with the proposed resonator and two separated microfluidic channels--one intertwined with the interdigital lines and the other positioned below the stub. The circuit has been fabricated using low-temperature co-fired ceramics technology and its performance was verified through the measurement of its responses for different fluids in the microfluidic channels. The results confirm the dual-sensing capability with zero mutual influence as well as good overall performance. Besides an excellent potential for dual-sensing applications, the proposed sensor is a good candidate for application in mixing fluids and cell counting. [ABSTRACT FROM AUTHOR]

This manuscript presents the use of three novel technologies for the implementation of wireless green battery-less sensors that can be used in agriculture. The three technologies, namely, additive manufacturing, energy harvesting, and wireless power transfer from airborne transmitters carried from UAVs, are considered for smart agriculture applications, and their combined use is demonstrated in a case study experiment. Additive manufacturing is exploited for the implementation of both RFID-based sensors and passive sensors based on humidity-sensitive materials. A number of energy-harvesting systems at UHF and ISM frequencies are presented, which are in the position to power platforms of wireless sensors, including humidity and temperature IC sensors used as agriculture sensors. Finally, in order to provide wireless energy to the soil-based sensors with energy harvesting features, wireless power transfer (WPT) from UAV carried transmitters is utilized. The use of these technologies can facilitate the extensive use and exploitation of battery-less wireless sensors, which are environmentally friendly and, thus, "green". Additionally, it can potentially drive precision agriculture in the next era through the implementation of a vast network of wireless green sensors which can collect and communicate data to airborne readers so as to support, the Artificial Intelligence and Machine Learning-based decision-making with data. [ABSTRACT FROM AUTHOR]

Over the past few years, the scale of sensor networks has greatly expanded. This generates extended spatiotemporal datasets, which form a crucial information resource in numerous fields, ranging from sports and healthcare to environmental science and surveillance. Unfortunately, these datasets often contain missing values due to systematic or inadvertent sensor misoperation. This incompleteness hampers the subsequent data analysis, yet addressing these missing observations forms a challenging problem. This is especially the case when both the temporal correlation of timestamps within a single sensor and the spatial correlation between sensors are important. Here, we apply and evaluate 12 imputation methods to complete the missing values in a dataset originating from large-scale environmental monitoring. As part of a large citizen science project, IoT-based microclimate sensors were deployed for six months in 4400 gardens across the region of Flanders, generating 15-min recordings of temperature and soil moisture. Methods based on spatial recovery as well as time-based imputation were evaluated, including Spline Interpolation, MissForest, MICE, MCMC, M-RNN, BRITS, and others. The performance of these imputation methods was evaluated for different proportions of missing data (ranging from 10% to 50%), as well as a realistic missing value scenario. Techniques leveraging the spatial features of the data tend to outperform the time-based methods, with matrix completion techniques providing the best performance. Our results therefore provide a tool to maximize the benefit from costly, large-scale environmental monitoring efforts. [ABSTRACT FROM AUTHOR]

Respiratory rate is a critical vital sign that indicates health condition, sleep quality, and exercise intensity. This paper presents a non-invasive, ultra-low-power, and cost-effective wireless wearable sensor, which is installed on an off-the-shelf KN95 mask to facilitate respiration monitoring. The sensing principle is based on the periodic airflow temperature variations caused by exhaled hot air and inhaled cool air in respiratory cycles. By measuring the periodic temperature variations at the exhalation valve of mask, the respiratory parameters can be accurately and reliably detected, regardless of body movements and breathing pathways through nose or mouth. Specifically, we propose a voltage divider with controllable resistors and corresponding selection criteria to improve the sensitivity of temperature measurement, a peak detection algorithm with spline interpolation to increase sampling period without reducing the detection accuracy, and effective low-power optimization measures to prolong the battery life. The experimental results have demonstrated the effectiveness of the proposed sensor, showing a small mean absolute error (MAE) of 0.449 bpm and a very low power consumption of 131.4 μ W. As a high accuracy, low cost, low power, and reusable miniature wearing device for convenient respiration monitoring in daily life, the proposed sensor holds promise in real-world feasibility. [ABSTRACT FROM AUTHOR]

In this paper, a new method for gaining the control of standalone underwater sensor nodes based on sensing the power supply evolution is presented. Underwater sensor networks are designed to support multiple extreme scenarios such as network disconnections. In those cases, the sensor nodes involved should go into standalone, and its wired and wireless communications should be disabled. This paper presents how to exit from the standalone status and enter into debugging mode following a practical ultra-low power design methodology. In addition, the discharge and regeneration effects are analyzed and modeled to minimize the error using the sensor node self measurements. Once the method is presented, its implementation details are discussed including other solutions like wake up wireless modules or a pin interruption solution. Its advantages and disadvantages are discussed. The method proposed is evaluated with several simulations and laboratory experiments using a real aquaculture sensor node. Finally, all the results obtained demonstrate the usefulness of our new method to gain the control of a standalone sensor node. The proposal is better than other approaches when the hibernation time is longer than 167.45 μ s. Finally, our approach requires two orders of magnitude less energy than the best practical solution. [ABSTRACT FROM AUTHOR]

Indoor human tracking and activity recognition are fundamental yet coherent problems for ambient assistive living. In this paper, we propose a method to address these two critical issues simultaneously. We construct a wireless sensor network (WSN), and the sensor nodes within WSN consist of pyroelectric infrared (PIR) sensor arrays. To capture the tempo-spatial information of the human target, the field of view (FOV) of each PIR sensor is modulated by masks. A modified partial filter algorithm is utilized to decode the location of the human target. To exploit the synergy between the location and activity, we design a two-layer random forest (RF) classifier. The initial activity recognition result of the first layer is refined by the second layer RF by incorporating various effective features. We conducted experiments in a mock apartment. The mean localization error of our system is about 0.85 m. For five kinds of daily activities, the mean accuracy for 10-fold cross-validation is above 92%. The encouraging results indicate the effectiveness of our system. [ABSTRACT FROM AUTHOR]

There are wireless networks in which typically communications are unsafe. Most terrestrial wireless sensor networks belong to this category of networks. Another example of an unsafe communication network is an underwater acoustic sensor network (UWASN). In UWASNs in particular, communication failures occur frequently and the failure durations can range from seconds up to a few hours, days, or even weeks. These communication failures can cause data losses significant enough to seriously damage human life or property, depending on their application areas. In this paper, we propose a framework to reduce sensor data loss during communication failures and we present a formal approach to the Selection by Minimum Error and Pattern (SMEP) method that plays the most important role for the reduction in sensor data loss under the proposed framework. The SMEP method is compared with other methods to validate its effectiveness through experiments using real-field sensor data sets. Moreover, based on our experimental results and performance comparisons, the SMEP method has been validated to be better than others in terms of the average sensor data value error rate caused by sensor data loss. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) have been widely used to collect valuable information in Structural Health Monitoring (SHM) of bridges, using various sensors, such as temperature, vibration and strain sensors. Since multiple sensors are distributed on the bridge, accurate time synchronization is very important for multi-sensor data fusion and information processing. Based on shape of the bridge, a spanning tree is employed to build linear topology WSNs and achieve time synchronization in this paper. Two-way time message exchange (TTME) and maximum likelihood estimation (MLE) are employed for clock offset estimation. Multiple TTMEs are proposed to obtain a subset of TTME observations. The time out restriction and retry mechanism are employed to avoid the estimation errors that are caused by continuous clock offset and software latencies. The simulation results show that the proposed algorithm could avoid the estimation errors caused by clock drift and minimize the estimation error due to the large random variable delay jitter. The proposed algorithm is an accurate and low complexity time synchronization algorithm for bridge health monitoring. [ABSTRACT FROM AUTHOR]

In addition to the traditional densely deployed cases, widely distributed wireless sensor networks (WDWSNs) have begun to emerge. In these networks, sensors are far away from each other and have no network connections. In this paper, a special application of data collection for WDWSNs is considered where each sensor (Unmanned Ground Vehicle, UGV) moves in a hazardous and complex terrain with many obstacles. They have their own work cycles and can be accessed only at a few locations. A mobile sink cruises on the ground to collect data gathered from these UGVs. Considerable delay is inevitable if the UGV and the mobile sink miss the meeting window or wait idly at the meeting spot. The unique challenge here is that, for each cycle of an UGV, there is only a limited time window for it to appear in front of the mobile sink. Therefore, we propose scheduling the path of a single mobile sink, targeted at visiting a maximum number of UGVs in a timely manner with the shortest path, according to the timing constraints bound by the cycles of UGVs. We then propose a bipartite matching based algorithm to reduce the number of mobile sinks. Simulation results show that the proposed algorithm can achieve performance close to the theoretical maximum determined by the duty cycle instance. [ABSTRACT FROM AUTHOR]

The concept of the Internet of Things (IoT) is an important part of the next generation of information. Wireless sensor networks are composed of independent distributed smart sensor nodes and gateways. These discrete sensors constantly gather external physical information, such as temperature, sound, and vibration. Owing to the diversity of sensor devices and the complexity of the sensor sensing environment, the direct modeling of an IoT-aware business process application is particularly difficult. In addition, how to effectively deploy those designed applications to discrete servers in the heterogeneous sensor networks is also a pressing problem. In this paper, we propose a resource-oriented modeling approach and a dynamic consistent hashing (DCH)-based deploying algorithm to solve the above problems. Initially, we extended the graphic and machine-readable model of Business Process Model Notation (BPMN) 2.0 specification, making it able to support the direct modeling of an IoT-aware business process application. Furthermore, we proposed the DCH-based deploying algorithm to solve the problem of dynamic load balancing and access efficiency in the distributed execution environment. Finally, we designed an actual extended BPMN plugin in Eclipse. The approach presented in this paper has been validated to be effective. [ABSTRACT FROM AUTHOR]

Entropy Correlation and Its Impacts on Data Aggregation in a Wireless Sensor Network. References 1 Dai R., Akyildiz I.F. A spatial correlation model for visual information in wireless multimedia sensor networks. Reply to Legat, B.; Rocher, L. The Limits of Pairwise Correlation to Model the Joint Entropy. [Extracted from the article]

Mobile sink is widely used for data collection in wireless sensor networks. It can avoid ‘hot spot’ problems but energy consumption caused by multihop transmission is still inefficient in real-time application scenarios. In this paper, a greedy scanning data collection strategy (GSDCS) is proposed, and we focus on how to reduce routing energy consumption by shortening total length of routing paths. We propose that the mobile sink adjusts its trajectory dynamically according to the changes of network, instead of predetermined trajectory or random walk. Next, the mobile sink determines which area has more source nodes, then it moves toward this area. The benefit of GSDCS is that most source nodes are no longer needed to upload sensory data for long distances. Especially in event-driven application scenarios, when event area changes, the mobile sink could arrive at the new event area where most source nodes are located currently. Hence energy can be saved. Analytical and simulation results show that compared with existing work, our GSDCS has a better performance in specific application scenarios. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) have been widely used in industrial systems. Their real-time performance and reliability are fundamental to industrial production. Many works have studied the two aspects, but only focus on single criticality WSNs. Mixed criticality requirements exist in many advanced applications in which different data flows have different levels of importance (or criticality). In this paper, first, we propose a scheduling algorithm, which guarantees the real-time performance and reliability requirements of data flows with different levels of criticality. The algorithm supports centralized optimization and adaptive adjustment. It is able to improve both the scheduling performance and flexibility. Then, we provide the schedulability test through rigorous theoretical analysis. We conduct extensive simulations, and the results demonstrate that the proposed scheduling algorithm and analysis significantly outperform existing ones. [ABSTRACT FROM AUTHOR]

Particle filters (PFs) are widely used for nonlinear signal processing in wireless sensor networks (WSNs). However, the measurement uncertainty makes the WSN observations unreliable to the actual case and also degrades the estimation accuracy of the PFs. In addition to the algorithm design, few works focus on improving the likelihood calculation method, since it can be pre-assumed by a given distribution model. In this paper, we propose a novel PF method, which is based on a new likelihood fusion method for WSNs and can further improve the estimation performance. We firstly use a dynamic Gaussian model to describe the nonparametric features of the measurement uncertainty. Then, we propose a likelihood adaptation method that employs the prior information and a belief factor to reduce the measurement noise. The optimal belief factor is attained by deriving the minimum Kullback-Leibler divergence. The likelihood adaptation method can be integrated into any PFs, and we use our method to develop three versions of adaptive PFs for a target tracking system using wireless sensor network. The simulation and experimental results demonstrate that our likelihood adaptation method has greatly improved the estimation performance of PFs in a high noise environment. In addition, the adaptive PFs are highly adaptable to the environment without imposing computational complexity. [ABSTRACT FROM AUTHOR]

Medical asset tracking systems track a medical device with a mobile node and determine its status as either in or out, because it can leave a monitoring area. Due to a failed node, this system may decide that a mobile asset is outside the area, even though it is within the area. In this paper, an efficient classification method is proposed to separate mobile nodes disconnected from a wireless sensor network between nodes with faults and a node that actually has left the monitoring region. The proposed scheme uses two trends extracted from the neighboring nodes of a disconnected mobile node. First is the trend in a series of the neighbor counts; the second is that of the ratios of the boundary nodes included in the neighbors. Based on such trends, the proposed method separates failed nodes from mobile nodes that are disconnected from a wireless sensor network without failures. The proposed method is evaluated using both real data generated from a medical asset tracking system and also using simulations with the network simulator (ns-2). The experimental results show that the proposed method correctly differentiates between failed nodes and nodes that are no longer in the monitoring region, including the cases that the conventional methods fail to detect. [ABSTRACT FROM AUTHOR]

This paper describes a distributed point-source monitoring platform for gas level and leakage detection in hazardous environments. The platform, based on a wireless sensor network (WSN) architecture, is organised into sub-networks to be positioned in the plant's critical areas; each sub-net includes a gateway unit wirelessly connected to the WSN nodes, hence providing an easily deployable, stand-alone infrastructure featuring a high degree of scalability and reconfigurability. Furthermore, the system provides automated calibration routines which can be accomplished by non-specialized maintenance operators without system reliability reduction issues. Internet connectivity is provided via TCP/IP over GPRS (Internet standard protocols over mobile networks) gateways at a one-minute sampling rate. Environmental and process data are forwarded to a remote server and made available to authenticated users through a user interface that provides data rendering in various formats and multi-sensor data fusion. The platform is able to provide real-time plant management with an effective; accurate tool for immediate warning in case of critical events. [ABSTRACT FROM AUTHOR]