Search

Channel phase calibration is a crucial issue in high resolution and wide swath (HRWS) imagery with azimuth multi-channel synthetic aperture radar (SAR) systems. Precise phase calibration is definitely required in reconstructing the full Doppler spectrum for precise HRWS imagery without high-level ambiguities. In this paper, we propose a novel calibration for HRWS SAR imagery by optimizing the reconstructed unambiguous Doppler spectrum. The sharpness of the reconstructed Doppler spectrum is applied as the metric to measure the unambiguity quality, which is maximized to retrieve the element phase error caused by channel imbalance. Real data experiments demonstrate the performance of the proposed calibration for ambiguity suppression in HRWS SAR imagery.

A silicon photonic polarization multiplexing (PM) sensor featuring both a large range and a high resolution is proposed and experimentally demonstrated. The sensor includes a Fabry–Pérot (FP) resonator and a microring resonator (MRR) functioning as the sensing parts. With PM technology, the FP resonator only works on the transverse-electric mode while the MRR only on the transverse-magnetic mode. Thus, the proposed sensor can simultaneously achieve a large range with a short FP resonator and a high resolution with a high-Q MRR. Measured results show a range of 113 °C and a resolution of 0.06 °C for temperature sensing, and a range of 0.58 RIU (refractive index unit) with the resolution of 0.002 RIU for analyte refractive index sensing.

An correction is presented to correct Figure 5a in [Sensors, 2017, 17, 555].

In this work, a biosensing method based on in situ, fast, and sensitive measurements of ellipsometric parameters (Ψ, ∆) is proposed. Bare silicon wafer substrate is functionalized and used to bind biomolecules in the solution. Coupled with a 45° dual-drive symmetric photoelastic modulator-based ellipsometry, the parameters Ψ and ∆ of biolayer arising due to biomolecular interactions are determined directly, and the refractive index (RI) of the solution and the effective thickness and surface mass density of the biolayer for various interaction time can be further monitored simultaneously. To illustrate the performance of the biosensing method, immunosensing for immunoglobulin G (IgG) was taken as a case study. The experiment results show that the biosensor response of the limit of detection for IgG is 15 ng/mL, and the data collection time is in milliseconds. Moreover, the method demonstrates a good specificity. Such technique is a promising candidate in developing a novel sensor which can realize fast and sensitive, label-free, easy operation, and cost-effective biosensing.

A high-sensitivity, low-cost, ultrathin, hollow fiber micro bubble structure was proposed; such a bubble can be used to develop a high-sensitivity strain sensor based on a Fabry–Perot interferometer (FPI). The micro bubble is fabricated at the fiber tip by splicing a glass tube to a single mode fiber (SMF) and then the glass tube is filled with gas in order to expand and form a micro bubble. The sensitivity of the strain sensor with a cavity length of about 155 μm and a bubble wall thickness of about 6 μm was measured to be up to 8.14 pm/μϵ.