Search

The combination of the dark fiber in existing Optical Fiber Composite Overhead Ground Wire (OPGW) with Distributed Optical Fiber Sensing (DOFS) technology can be used to enable online monitoring and provide early warnings of anomalies in high-voltage transmission lines. Accurate mapping of the optical cable length to the geographic coordinates of actual towers is a key factor in achieving this goal. This paper discusses the principle of using a DOFS system for transmission line tower positioning and presents four available positioning features. To overcome the limitations of single physical parameter positioning, this paper presents a self-developed hybrid DOFS that simultaneously captures Rayleigh backscattering and Brillouin scattering signals. Several physical parameters, including temperature, strain, and vibration, are acquired synchronously. Through hybrid multi-parameter analysis, the rapid and accurate positioning of OPGW line towers is achieved. Experimental results have shown that the proposed method, based on the hybrid DOFS system, can locate up to 82 towers, while the traditional method could only identify 12. The hybrid system was able to complete 80% of the tension towers in 40 h. This paper presents a novel multi-parameter localization method that has the potential to significantly improve the efficiency and reliability of grid operation and maintenance.

Distributed optical fiber sensors (DOFSs) are a promising technology for their unique advantage of long-distance distributed measurements in industrial applications. In recent years, modern industrial monitoring has called for comprehensive multi-parameter measurements to accurately identify fault events. The hybrid DOFS technology, which combines the Rayleigh, Brillouin, and Raman scattering mechanisms and integrates multiple DOFS systems in a single configuration, has attracted growing attention and has been developed rapidly. Compared to a single DOFS system, the multi-parameter measurements based on hybrid DOFS offer multidimensional valuable information to prevent misjudgments and false alarms. The highly integrated sensing structure enables more efficient and cost-effective monitoring in engineering. This review highlights the latest progress of the hybrid DOFS technology for multi-parameter measurements. The basic principles of the light-scattering-based DOFSs are initially introduced, and then the methods and sensing performances of various techniques are successively described. The challenges and prospects of the hybrid DOFS technology are discussed in the end, aiming to pave the way for a vaster range of applications.

Ultra-weak fiber Bragg grating (UWFBG) array-based phase-sensitive optical time-domain reflectometry (Φ-OTDR) utilizes the interference interaction between the reference light and the reflected light from the broadband gratings for sensing. It significantly improves the performance of the distributed acoustic sensing system (DAS) because the intensity of the reflected signal is much higher than that of the Rayleigh backscattering. This paper shows that Rayleigh backscattering (RBS) has become one of the primary noise sources in the UWFBG array-based Φ-OTDR system. We reveal the impact of the Rayleigh backscattering signal on the intensity of the reflective signal and the precision of the demodulated signal, and we suggest reducing the pulse duration to improve the demodulation accuracy. Experimental results demonstrate that using light with a 100 ns pulse duration can improve the measurement precision by three times compared with the use of a 300 ns pulse duration.

Due to the light scattered by atmospheric aerosols, the amplitude image contrast is degraded and the depth measurement is greatly distorted for time-of-flight (ToF) imaging in fog. The problem limits ToF imaging to be applied in outdoor settings, such as autonomous driving. To improve the quality of the images captured by ToF cameras, we propose a polarization phasor imaging method for image recovery in foggy scenes. In this paper, optical polarimetric defogging is introduced into ToF phasor imaging, and the degree of polarization phasor is proposed to estimate the scattering component. A polarization phasor imaging model is established, aiming at separating the target component from the signal received by ToF cameras to recover the amplitude and depth information. The effectiveness of this method is confirmed by several experiments with artificial fog, and the experimental results demonstrate that the proposed method significantly improves the image quality, with robustness in different thicknesses of fog.

Phase-sensitive time-domain reflectometry (Φ-OTDR) can be used for fully distributed long-distance vibration monitoring. There is a fading phenolmenon in the Φ-OTDR, which will cause the signal intensity somewhere to be too low to extract the phase of the signal without distortion. In this paper, the Φ-OTDR based on space-division multiplexing (SDM) is proposed to suppress fading and we used multi-core optical fiber (MCF) to realize SDM. While inheriting the previous optimization strategy, we proposed a strategy based on frequency spectral similarity to process multiple independent signals obtained by SDM. And we compared the two methods. Through the experiments, the distortion rate can be reduced from an average level of 9.34% to less than 2% under continuous running of 270 s, which proves that SDM is a reliable technical route to achieve fading suppression. This method can effectively improve the fading suppression capability of the existed commercial systems.

The Earth’s ionosphere is greatly influenced by geomagnetic activities, especially geomagnetic storms. During a geomagnetic storm, the ionosphere suffers many perturbations, leading to a spatial gradient that are neglected during geomagnetically quiet periods. An ionospheric gradient generates potential hazards for a ground-based argumentation system (GBAS) by enlarging the errors in the delay corrections between ground monitor stations and users. To address this problem, this work investigates the characteristics of the ionospheric gradient under geomagnetic storms. Global Navigation Satellite System (GNSS) observations from the continuously operating reference station (CORS) network were used to analyze the ionospheric gradients during the geomagnetic storm on 8 September 2017. The statistical behavior of the ionospheric gradient was further discussed. Experiments show that strong geomagnetic perturbations lead to large ionospheric gradients, and the gradients also vary with the geomagnetic location.

Distributed acoustic sensing based on phase-sensitive optical time-domain reflectometry (Φ-OTDR) has been widely used in many fields. Phase demodulation of the Φ-OTDR signal is essential for undistorted acoustic measurement. Digital coherent detection is a universal method to implement phase demodulation, but it may cause severe computational burden. In this paper, analog I/Q demodulation is introduced into the Φ-OTDR based DAS system to solve this problem, which can directly obtain the I and Q components of the beat signal without any digital processing, meaning that the computational cost can be sharply reduced. Besides, the sampling frequency of the data acquisition card can theoretically be lower than the beat frequency as the spectrum aliasing would not affect the demodulation results, thus further reducing the data volume of the system. Experimental results show that the proposed DAS system can demodulate the phase signal with good linearity and wide frequency response range. It can also adequately recover the sound signal sensed by the optical fiber, indicating that it can be a promising solution for computational-cost-sensitive distributed acoustic sensing applications.

This paper proposes and demonstrates a phase-sensitive optical time domain reflectometry (Φ-OTDR) sensing system with multi-spatial resolution (MSR) analysis property. With both theoretical analysis and an experiment, the qualitative relationship between spatial resolution (SR), signal-to-noise ratio (SNR) and the length of the vibration region has been revealed, which indicates that choosing a suitable SR to analyze the vibration event can effectively enhance the SNR of a sensing system. The proposed MSR sensing scheme offers a promising solution for the performance optimization of Φ-OTDR sensing systems, which can restore vibration events of different disturbance range with optimum SNR in merely a single measurement while maintaining the same detectable frequency range.

Location error and false alarm are noticeable problems in fiber distributed acoustic sensing systems based on phase-sensitive optical time-domain reflectometry (Φ-OTDR). A novel method based on signal kurtosis is proposed to locate and discriminate perturbations in Φ-OTDR systems. The spatial kurtosis (SK) along the fiber is firstly obtained by calculating the kurtosis of acoustic signals at each position of the fiber in a short time period. After the moving average on the spatial dimension, the spatial average kurtosis (SAK) is then obtained, whose peak can accurately locate the center of the vibration segment. By comparing the SAK value with a certain threshold, we may to some degree discriminate the instantaneous destructive perturbations from the system noise and certain ambient environmental interferences. The experimental results show that, comparing with the average of the previous localization methods, the SAK method improves the pencil-break and digging locating signal-to-noise ratio (SNR) by 16.6 dB and 17.3 dB, respectively; and decreases the location standard deviation by 7.3 m and 9.1 m, respectively. For the instantaneous destructive perturbation (pencil-break and digging) detection, the false alarm rate can be as low as 1.02%, while the detection probability is maintained as high as 95.57%. In addition, the time consumption of the SAK method is adequate for a real-time Φ-OTDR system.