Search

Some of the shopping malls, airports, hospitals, etc. have underground parking lots where hundreds of vehicles can be parked. However, first-time visitors find it difficult to determine their current location and need to keep moving the vehicle to find an empty parking space. Moreover, they need to remember the parked location, and find a nearby staircase or elevator to move toward the destination. In such a situation, if the user location can be estimated, a new navigation system can be offered, which can assist users. This study presents an underground parking lot navigation system using long-term evolution (LTE) signals. As the proposed system utilizes LTE network signals for which the infrastructure is already installed, no additional infrastructure is required. To estimate the location of the vehicle, the signal strength of the LTE signal is accumulated, and the location of the vehicle is estimated by comparing it with the previously stored database of the LTE received signal strength (RSS). In addition, the acceleration and gyroscope sensors of a smartphone are used to improve the vehicle position estimation performance. The effectiveness of the proposed system is verified by conducting an experiment in a large shopping-mall underground parking lot where approximately 500 vehicles can be parked. From the results of the experiment, an error of less than an average of 10 m was obtained, which shows that seamless navigation is possible using the proposed system even in an environment where GNSS does not function.

Autonomous driving helps drivers avoid paying attention to keeping to a lane or keeping a distance from the vehicle ahead. However, the autonomous driving is limited by the need to park upon the completion of driving. In this sense, automated valet parking (AVP) system is one of the promising technologies for enabling drivers to free themselves from the burden of parking. Nevertheless, the driver must continuously monitor the automated system in the current automation level. The main reason for monitoring the automation system is due to the limited sensor range and occlusions. For safety reasons, the current field of view must be taken into account, as well as to ensure comfort and to avoid unexpected and harsh reactions. Unfortunately, due to parked vehicles and structures, the field of view in a parking lot is not sufficient for considering new obstacles coming out of occluded areas. To solve this problem, we propose a method that estimates the risks for unobservable obstacles by considering worst-case assumptions. With this method, we can ensure to not act overcautiously while moving safe. As a result, the proposed method can be a proactive approach to consider the limited visibility encountered in a parking lot. In the proposed method, occlusion can be efficiently reflected in the planning process. The potential of the proposed method is evaluated in a variety of simulations.

Modern parking lots have gradually developed into underground garages to improve the efficient use of space. However, the complex design of parking lots also increases the demands on vehicle navigation. The traditional method of navigation switching only uses satellite signals. After the Position Dilution Of Precision (PDOP) of satellite signals is over the limit, vehicle navigation will enter indoor mode. It is not suitable for vehicles in underground garages to switch modes with a fast-response system. Therefore, this paper chooses satellite navigation, inertial navigation, and the car system to combine navigation. With the condition that the vehicle can freely travel through indoor and outdoor environments, high-precision outdoor environment navigation is used to provide the initial state of underground navigation. The position of the vehicle underground is calculated by the Dead Reckoning (DR) navigation system. This paper takes advantage of the Extended Kalman Filter (EKF) algorithm to provide two freely switchable navigation modes for vehicles in ground and underground garages. The continuity, robustness, fast response, and low cost of the indoor and outdoor switching navigation methods are verified in real-time systems.

The importance of vacant parking space detection systems is increasing dramatically as the avoidance of traffic congestion and the time-consuming process of searching an empty parking space is a crucial problem for drivers in urban centers. However, the existing parking space occupancy detection systems are either hardware expensive or not well-generalized for varying images captured from different camera views. As a solution, we take advantage of an affordable visual detection method that is made possible by the fact that camera monitoring is already available in the majority of parking areas. However, the current problem is a challenging vision task because of outdoor lighting variation, perspective distortion, occlusions, different camera viewpoints, and the changes due to the various seasons of the year. To overcome these obstacles, we propose an approach based on Dilated Convolutional Neural Network specifically designed for detecting parking space occupancy in a parking lot, given only an image of a single parking spot as input. To evaluate our method and allow its comparison with previous strategies, we trained and tested it on well-known publicly available datasets, PKLot and CNRPark + EXT. In these datasets, the parking lot images are already labeled, and therefore, we did not need to label them manually. The proposed method shows more reliability than prior works especially when we test it on a completely different subset of images. Considering that in previous studies the performance of the methods was compared with well-known architecture&mdash, AlexNet, which shows a highly promising achievement, we also assessed our model in comparison with AlexNet. Our investigations showed that, in comparison with previous approaches, for the task of classifying given parking spaces as vacant or occupied, the proposed approach is more robust, stable, and well-generalized for unseen images captured from completely different camera viewpoints, which has strong indications that it would generalize effectively to other parking lots.

Parking in heavily populated areas has been considered one of the main challenges in the transportation systems for the past two decades given the limited parking resources, especially in city centres. Drivers often waste long periods of time hunting for an empty parking spot, which causes congestion and consumes energy during the process. Thus, finding an optimal parking spot depends on several factors such as street traffic congestion, trip distance/time, the availability of a parking spot, the waiting time on the lot gate, and the parking fees. Designing a parking spot allocation algorithm that takes those factors into account is crucial for an efficient and high-availability parking service. We propose a smart routing and parking algorithm to allocate an optimal parking space given the aforementioned limiting factors. This algorithm supports choosing the appropriate travel route and parking lot while considering the real-time street traffic and candidate parking lots. A multi-objective function is introduced, with varying weights of the five factors to produce the optimal parking spot with the least congested route while achieving a balanced utilization for candidate parking lots and a balanced traffic distribution. A queueing model is also developed to investigate the availability rate in candidate parking lots while considering the arrival rate, departure rate, and the lot capacity. To evaluate the performance of the proposed algorithm, simulation scenarios have been performed for different cases of high and low traffic intensity rates. We have tested the algorithm on in-city parking facility in the city of Al Madinah as a case study. The results show that the proposed algorithm is effective in achieving a balanced utilization of the parking lots, reducing traffic congestion rates on all routes to candidate parking lots, and minimizing the driving time to the assigned parking spot. Additionally, the proposed algorithm outperforms the MADM algorithm in terms of the selected three metrics for the five periods.

Smart Parking Management Systems (SPMSs) have become a research hotspot in recent years. Many researchers are focused on vehicle detection technology for SPMS which is based on magnetic sensors. Magnetism-based wireless vehicle detectors (WVDs) integrate low-power wireless communication technology, which improves the convenience of construction and maintenance. However, the magnetic signals are not only susceptible to the adjacent vehicles, but also affected by the magnetic signal dead zone of high-chassis vehicles, resulting in a decrease in vehicle detection accuracy. In order to improve the vehicle detection accuracy of the magnetism-based WVDs, the paper introduces an RF-based vehicle detection method based on the characteristics analysis of received signal strengths (RSSs) generated by the wireless transceivers. Since wireless transceivers consume more energy than magnetic sensors, the proposed RF-based method is only activated to extract the data characteristics of RSSs to further judge the states of vehicles when the data feature of magnetic signals is not sufficient to provide accurate judgment on parking space status. The proposed method was evaluated in an actual roadside parking lot and experimental results show that when the sampling rate of magnetic sensor is 1 Hz, the vehicle detection accuracy is up to 99.62%. Moreover, compared with machine-learning-based vehicle detection method, the experimental results show that our method has achieved a good compromise between detection accuracy and power consumption.

The continuous global increase in the number of cars has led to an increase in parking issues, particularly with respect to the search for available parking spaces and finding cars. In this paper, we propose a navigation system for car owners to find their cars in indoor parking garages. The proposed system comprises a car-searching mobile app and a positioning-assisting subsystem. The app guides car owners to their cars based on a “turn-by-turn” navigation strategy, and has the ability to correct the user’s heading orientation. The subsystem uses beacon technology for indoor positioning, supporting self-guidance of the car-searching mobile app. This study also designed a local coordinate system to support the identification of the locations of parking spaces and beacon devices. We used Android as the platform to implement the proposed car-searching mobile app, and used Bytereal HiBeacon devices to implement the proposed positioning-assisting subsystem. We also deployed the system in a parking lot in our campus for testing. The experimental results verified that the proposed system not only works well, but also provides the car owner with the correct route guidance information.

The increasing development of the automotive industry towards a fully autonomous car has motivated the design of new value-added services in Vehicular Sensor Networks (VSNs). Within the context of VSNs, the autonomous car, with an increasing number of on-board sensors, is a mobile node that exchanges sensed and state information within the VSN. Among all the value added services for VSNs, the design of new intelligent parking management architectures where the autonomous car will coexist with traditional cars is mandatory in order to profit from all the opportunities associated with the increasing intelligence of the new generation of cars. In this work, we design a new smart parking system on top of a VSN that takes into account the heterogeneity of cars and provides guidance to the best parking place for the autonomous car based on a collaborative approach that searches for the common good of all of them measured by the accessibility rate, which is the ratio of the free parking places accessible for an autonomous car. Then, we simulate a real parking lot and the results show that the performance of our system is close to the optimum considering different communication ranges and penetration rates for the autonomous car.

Nowadays, in big cities, parking management is a critical issue from both the driver’s side and the city government’s side. From the driver’s side, how to find an available parking lot in a city is a considerable concern. As a result, smart parking systems recently have received great interest, both in academia and industry. From the city government’s side, how to manage and distribute such a limited public parking resource efficiently to give every visitor a fair chance of finding an on-street parking lot is also a considerable concern. However, existing studies of smart parking management focus only on assisting the driver’s side to find available parking spaces. This study aims to raise a new perspective on such smart parking management and to propose a novel location-centric IoT-cloud-based parking violation management system. The system is designed to assist authoritative officers in finding parking violations easily and recommends the least cost path for officers so that officers can achieve their highest productivity in finding parking violations and issuing parking tickets. Experimental results show that the system not only improves the productivity of officers in finding parking violations and issuing tickets, but also helps reduce the traveling cost of officers and to reduce the average violation period of violating cars considerably.

A semi-/autonomous driving car requires local weather information to identify if it is working inside its operational design domain and adapt itself accordingly. This information can be extracted from changes in the detections of a light detection and ranging (LIDAR) sensor. These changes are caused by modifications in the volumetric scattering of the atmosphere or surface reflection of objects in the field of view of the LIDAR. In order to evaluate the use of an automotive LIDAR as a weather sensor, a LIDAR is placed outdoor in a fixed position for a period of 9 months covering all seasons. As target, an asphalt region from a parking lot is chosen. The collected sensor raw data is labeled depending on the occurring weather conditions as: clear, rain, fog and snow, and the presence of sunlight: with or without background radiation. The influence of different weather types and background radiations on the measurement results is analyzed and different parameters are chosen in order to maximize the classification accuracy. The classification is done per frame in order to provide fast update rates while still keeping an F1 score higher than 80%. Additionally, the field of view is divided into two regions: atmosphere and street, where the influences of different weather types are most notable. The resulting classifiers can be used separately or together increasing the versatility of the system. A possible way of extending the method for a moving platform and alternatives to virtually simulate the scene are also discussed.