Search

Abstract Ice-contact deposits emplaced by Late Paleozoic Ice Age (LPIA) glaciers are rarely exposed due to a low degree of preservation and their capping by thick glaciomarine deglaciation sequences. In this paper, we present new data on glacial cyclicity, relative age constraints and paleoice flow interpretations for an ice-contact succession of the lowermost Itararé Group in eastern Paraná Basin (Brazil). The 80 m-thick ice-contact complex rests over the Itararé Group basal unconformity and comprises four stacked informal stratigraphic units regarded as the depositional/deformational record of three ice lobes advance/retreat cycles. Glacial cycle 1 comprises a sheet of massive diamictite resting on striated pavements carved on Devonian sandstones and topped by grooved/fluted surfaces, which indicate subglacial emplacement from a northward flowing ice lobe. The glacial cycle 2 succession was deposited in a proglacial to ice-marginal marine setting and subsequently deformed due to minor ice margin fluctuations of a westward/southwestward flowing grounded ice lobe. Glacial cycle 3 is interpreted as a thick overridden push moraine composed of grounding-line fan deposits capped by a subglacial diamictite emplaced by grounded ice advancing northwestward. A middle Visean-early Serpukhovian palynomorph assemblage was recorded in cycle two deposits, representing the oldest late Paleozoic glacial rocks in the Paraná Basin. The ice-contact complex elucidates multiple waxing and waning phases of the Windhoek Ice Sheet onto the eastern margin of the Paraná Basin during the Mississippian-Early Pennsylvanian, demonstrating that ice sheets of the early stages of the LPIA were also present in the Brazilian-African domain of southwestern Gondwana. Highlights • 3 glacial cycles with variable ice lobe kinematics are defined for an ice-contact complex in the lowermost Itararé Group. • The basal age of the Itararé Group is older than previously interpreted ranging from the middle Visean. • Ice sheets covered the west-central domain of Gondwana during the Mississippian. [ABSTRACT FROM AUTHOR]

We know less about subglacial meltwater flow properties in distributed inefficient and semi-efficient systems in comparison to those of ice marginal eskers and proglacial environments. While previous studies have indicated the overall common presence of upper-flow-regime (UFR) bedforms in glacigenic settings, facies expressions of subglacial meltwater flows remain poorly documented. Three ca. 3 m deep and up to 70 m long trenches excavated across a triangle-shaped subglacial landform called a murtoo in a Lateglacial to Holocene meltwater route in SW Finland provide a detailed window into sedimentary structures presumably formed ca. 40–50 km away from the coeval subaqueous margin of the Fennoscandian Ice Sheet (FIS). The aim of this paper is to document small-scale bedforms, which formed subglacially by meltwater flow and to characterize the proximal and central parts of the studied murtoo during its early evolutionary phase. We defined seven main facies types that characterize the depositional processes of the unit. Overall, the studied deposits reflect increasing meltwater delivery through time and are characterized by abrupt lateral changes in sedimentary structures and grain size. While the initial deposits are dominated by massive and horizontally laminated silt with sand lenses interpreted as lower-flow-regime deposits, the latter sediments are characterized by sinusoidal stratification, sigmoidal cross-stratification and scours with backsets or chaotic fill interpreted as deposits of antidunes, humpback dunes, chutes-and-pools and cyclic steps of the upper-flow regime. The upper-flow-regime bedforms developed on a 1 m high and 15 m long bed slope and are associated with the formation of a short-lived enlarged water-filled cavity or pond, where supercritical density flows allowed for the deposition of upper-flow regime bedforms. The final coarse-grained murtoo head-bar development, characterized by planar-cross stratified gravel and pebbly sand, indicates avalanche processes that were controlled by grain size. Our results confirm that the core of the murtoo is depositional and meltwater processes played a key role in its deposition. Despite the subglacial setting with a subaqueous ice-sheet margin, the meltwater flow was not permanently characterized by pipe-flow conditions. Overall, the findings contribute to the understanding of semi-distributed subglacial meltwater systems during the retreat of a continental ice sheet (FIS) in a rapidly warming climate. [ABSTRACT FROM AUTHOR]

Abstract: In the eastern part of the Moroccan Anti-Atlas Mountains, the Alnif area exposes a buried Ordovician glacial tunnel valley (5km wide, 180m deep) cut into preglacial marine sediments. The preglacial sedimentary sequence, deposited in a marine environment, is characterized by a typical “layer-cake” configuration of permeable (sand) and impermeable (clays and early-cemented sandstones) layers. At the base of the tunnel valley, a discontinuous and fan-shaped glacial conglomeratic unit 10 to 15m thick occurs, erosively deposited over preglacial marine sediments. The conglomeratic unit is composed of preglacial intraclasts embedded within a sandy matrix. Both preglacial and glacial sediments display soft-sediment deformation structures related to fluctuating porewater pressure and strain rates, including ball structures, clastic dykes, fluted surfaces, turbate structures, folds and radial extensional normal faults. Kinematics and relative chronology of these deformation structures allow the role of porewater pressure in the process of tunnel valley genesis on soft beds to be understood. The tunnel valley formed through multi-phased episodes of intense hydrofracturing of the preglacial bed due to overpressure development promoted by ice sheet growth over the study area, and configuration of the substratum. Transport of the resulting conglomerate composed of preglacial intraclasts and fluidized sand occurred through subglacial pipes. The brecciated material is deposited in subglacial cavities, forming fans of massive sandy conglomerate infilling the base of the tunnel valley. The conglomeratic unit is partially reworked by meltwater and exhibits intense soft-sediment deformations, due to episodes of ice–bed coupling and decoupling. [Copyright &y& Elsevier]

Although observations of recent volcanic eruptions beneath Vatnajo¨kull, Iceland have improved the understanding of ice deformation and meltwater drainage, little is known about the processes that occur at the glacier base. We present observations of the products of a small-volume, effusive subglacial rhyolite eruption at Bla´hnu´kur, Torfajo¨kull, Iceland. Lava bodies, typically 7 m long, have unusual conical morphologies and columnar joint orientations that suggest emplacement within cavities melted into the base of a glacier. Cavities appear to have been steep-walled and randomly distributed. These features can be explained by a simple model of conductive heat loss during the ascent of a lava body to the glacier base. The released heat melts a cavity in the overlying ice. The development of vapour-escape pipes in the waterlogged, permeable breccias surrounding the lava allows rapid heat transfer between lava and ice. The formed meltwater percolates into the breccias, recharging the cooling system and leaving a steam-filled cavity.The slow ascent rates of intrusive rhyolitic magma bodies provide ample time for a cavity to be melted in the ice above, even during the final 10 m of ascent to the glacier base. An equilibrium cavity size is calculated at which melting is balanced by creep closure. This is dependent upon the heat input and the difference between glaciostatic and cavity pressure. The cavity sizes inferred from Bla´hnu´kur are consistent with a pressure differential of 2–4 MPa, suggesting that the ice was at least 200 m thick. This is consistent with the volcanic stratigraphy, which indicates that the ice exceeded 350 m in thickness.Although this is the first time that a subglacial cavity system of this type has been reconstructed from an ancient volcanic sequence, it shares many characteristics with the modern firn cave system formed by fumarolic melting within the summit crater of Mount Rainier, Washington. At both localities, it appears that localised heating at the glacier base has resulted in heterogeneous melting patterns. Despite the different rheological properties of ice and firn, similar patterns of cavity roof deformation are inferred. The development of low-pressure subglacial cavities in regions of high heat flux may influence the trajectory of rising magma, with manifold implications for eruptive mechanisms and resultant subglacial volcanic landforms. [Copyright &y& Elsevier]

The expansion of ice sheets over soft, sandy substrates was widespread in the Early Palaeozoic, during the Late Ordovician glaciation of North Africa and Arabia. Similarly, large parts of southern Africa were glaciated by soft bedded ice sheets in the Late Palaeozoic Ice Age. An unanswered question is the extent to which subglacial deformation involved the passive recycling of unconsolidated materials, or the active production of new sediment through erosion and shearing. Here, we compile thin section data dovetailed with scanning electron microscope imagery from sandy subglacial substrates from South Africa, Algeria and Libya. Six samples were collected from soft-sediment striated pavements, i.e., surfaces that were sheared and deformed subglacially in an unconsolidated state. The samples show a considerable variation in deformation style but a unifying trait is the occurrence of striated and facetted quartz sand grains. These textural features testify to grain-grain attrition, and the potential production of sediment in the subglacial environment. [ABSTRACT FROM AUTHOR]