Search

In this study, Fusarium equiseti was isolated from the weed plant Tridax procumbens in an agricultural field and a crude extract produced with 75% ethanol for use as active ingredient material in natural herbicides. The herbicidal effect of F. equiseti extract was tested on water hyacinth (Eichornia crassipes), an invasive aquatic weed, by leaf disk assay at concentrations of 0.05%, 0.1%, and 0.2% w/v crude extract. Dose-dependent visual toxicity symptoms were evident after three days, namely chlorosis, yellow leaves surrounded by dark brown edges. Photosynthetic pigments (chlorophyll a, b, and carotenoids) and membrane integrity (as electrolyte leakage and malondialdehyde content) were evaluated following the leaf disk test. 3 days after treatment, photosynthetic pigment contents showed dose-dependent decreases, while both measures of membrane integrity showed dose-dependent increases with increasing extract concentration. In addition, a cytogenetic assay was conducted on Allium cepa L. root, in which mitotic index reduction and depigmentation were evident as early as 24 h after herbicide application. Finally, anatomical analysis of treated E. crassipes leaves revealed degradation or damage of the ground tissue. All told, our results support the F. equiseti crude-based natural herbicide cloud as a sustainable alternative in agriculture. [ABSTRACT FROM AUTHOR]

Colombia's continuous contamination of water resources and the low alternatives to produce biofuels have affected the fulfillment of the objectives of sustainable development, deteriorating the environment and affecting the economic productivity of this country. Due to this reality, projects on environmental and economic sustainability, phytoremediation, and the production of biofuels such as ethanol and hydrogen were combined. The objective of this article was to design and develop a sustainable system for wastewater treatment and the generation of biofuels based on the biomass of the aquatic plant Eichhornia crassipes. A system that simulates an artificial wetland with live E. crassipes plants was designed and developed, removing organic matter contaminants; subsequently, and continuing the sustainability project, bioreactors were designed, adapted, and started up to produce bioethanol and biohydrogen with the hydrolyzed biomass used in the phytoremediation process, generating around 12 g/L of bioethanol and around 81 ml H2/g. The proposed research strategy suggests combining two sustainable methods, bioremediation and biofuel production, to preserve the natural beauty of water systems and their surroundings. [ABSTRACT FROM AUTHOR]

Renewable resources have stood out as raw materials in producing biofuels. This study aimed to evaluate the parameters of alcohol transesterification (ethanol and methanol) and localization of collection of aquatic macrophyte Eichhornia crassipes (Mart.) Solms in the production of biodiesel by in situ transesterification. E. crassipes was collected in Dourados and Corumbá (Brazil) municipalities. The fatty acid ester composition of the biodiesel was characterized and quantified by gas chromatography. The biodiesel properties were estimated using the BiodieselAnalyzer© program prediction. The ethyl transesterification resulted in higher yields, but the localization of collection was the most relevant parameter in biodiesel production according to the Permutation Multivariate Analysis of Variance. The simulation and comparison of the physical–chemical properties of E. crassipes biodiesel and BD 100 (commercial biodiesel) were promising for commercial application. [ABSTRACT FROM AUTHOR]

The main thrust of this project is the fabrication of silver nanoparticles (AgNPs) from electronic waste (PCB board) and applying it on 100% cotton fabric as an antimicrobial agent. The nanoparticle formation of silver was done by green synthesis way using an aqueous leaf extract of Eichhornia crassipes. Furthermore, chitosan was also applied to the fabric with silver nanoparticles by coating. FTIR and SEM tests characterized the fabricated silver nanoparticles, and antimicrobial tests were followed by the disc diffusion method. The SEM analysis showed an average particle size of 76.91 nm. The FTIR analysis showed the successful reduction of silver nanoparticles and the bonding with chitosan and cellulose. Besides, the EDX reports confirmed the existence of AgNPs by indicating a strong signal in the silver region. In addition, SEM characteristics analysis confirmed the uniform deposition of silver nanoparticles. Finally, the antimicrobial property was tested against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria. The antimicrobial result was found satisfactory in the case of green-synthesized recycled AgNPs. However, the effectiveness was not observed to be higher than green-synthesized pure AgNPs. In this study, the zone of inhibition of AgNPs was also compared to the reference antibiotics Ciprofloxacin. [ABSTRACT FROM AUTHOR]

Water quality index (WQI) of Narora channel and health of endemic fish Bagarius bagarius and plant Eichhornia crassipes, district Bulandshahar, Uttar Pradesh, India were studied. Among the physicochemical properties of water, pH, D.O, Cr, Fe, Ni, and Cd were above the recommended standards. These factors lead to high WQI (4124.83), indicating poor quality and not suitable for drinking and domestic usage. In fish tissues, the highest metal load was reported in the liver (58.29) and the lowest in the kidney (33.73). Heavy metals also cause a lowering of condition indices. As expected, decreased serum protein (− 63.41%) and liver glycogen (− 79.10%) were recorded in the exposed fish. However, blood glucose (47.22%) and serum glycogen (74.69%) showed elevation. In the plant, roots (21.50) contained the highest, and leaves (16.87) had the lowest heavy metal load. Bioaccumulation factor (BAF) > 1, indicates hyperaccumulation of all metals. E. crassipes roots showed the highest translocation factor (TF) > 1 for Ni (1.57) and Zn (1.30). The high mobility factor (MF) reflected the suitability of E. crassipes for phytoextraction of Mn, Cd, Zn, Fe, Ni, and Cu. Moreover, Bagarius sp. consumption could not pose any non-cancer risk. Although, lower cancer risk can be expected from Ni and Cr. [ABSTRACT FROM AUTHOR]

The highly acid sulfate Rangsit soil series of Rangsit, Pathum-Thani district, Thailand poses a major problem for agriculture in the area. Water hyacinth is a naturally occurring weed that can grow aggressively, causing eutrophication and leading to many severe environmental impacts. Here, through the pyrolysis process, we convert water hyacinth to biochar and use it for acid soil amendment. We found the ratio between biochar, soil, and sand suitable for the cultivation of water convolvulus to be 50 g of biochar, 400 g of soil, and 100 g of sand (1:8:2). This soil mixture improved the pH of the soil from 4.73 to 7.57. The plant height of the water convolvulus grown in the soil mixture was the greatest at 20.45 cm and the plant weight with and without roots was greatest at 2.23 g and 2.52 g, respectively. Moreover, we demonstrated the dominance and high abundance of Bacillus among the community in soil with biochar amendment. Here we provide the first assessment of the appropriate amount of water hyacinth-derived biochar for mitigation of soil acidity and promotion of optimal water convolvulus growth. Moreover, biochar can optimally modify soil bacterial communities that benefit plant development. [ABSTRACT FROM AUTHOR]

Bioengineered structures, such as landfill cover, vegetated slopes or embankments, green roof and turf are comprised of soil and vegetation where vegetation imparts stability and protection through root reinforcement and hydrologic action. Soil in bioengineered structures often compacted and subjected to prolong drying due to irregular irrigation which necessitates the investigation of soil properties and vegetation growth in biochar-amended soil (BAS) under large suction range and it is scarce in the literature. In the present study, the effect of different biochar types on soil properties, and the vegetation growth in compacted soil and under large suction range was investigated for application in bioengineered structures. The results revealed that the biochar amendment decreased the dry density (5–32%) and increased the water retention capacity (θs by 15–104%, θ1500 by 82–445% and plant available water content (PAWC) by 22–55%), pH (28–77%) and cation exchange capacity (CEC, 16–723%) of the soil. Further, the vegetation growth i.e., vegetation density, dry root mass and shoot mass increased by 8–13%, 33–108% and 4–157% respectively after biochar amendment. The vegetation wilting was started at a higher suction (~ 900 kPa) relative to bare soil (800 kPa), the permanent wilting point (PWP) increased (by 3–35%) and the complete photosynthetic activity remained unchanged at a higher suction (1600 kPa) relative to bare soil (1050 kPa) after biochar amendment. Among the biochar types i.e., Sugarcane Bagasse biochar (SBB), Mesquite biochar (MB) and Water Hyacinth biochar (WHB) tested, the MB showed the best performance i.e., the suitable vegetation growth and health status. The improved water retention due to increased porosity, specific surface area (SSA) and presence of hydrophilic functional groups, and the higher pH, CEC and lower dry density in BAS attributed to the higher vegetation growth. The findings of the present study suggest the application of BAS in bioengineered structures. [ABSTRACT FROM AUTHOR]

In this work, the biosorption behavior of acid red 27 (AR27) dye using Eichhornia crassipes leaves (LECs) in a packed-bed column was investigated by varying relevant operational parameters and assessment of mathematical models. Results showed that the zero-charge point of LECs was 2.37 and that optima pH and volumetric flux of the influent solution for AR27 biosorption were 2.0 and 56.5 L / m 2 · h , respectively. The maximum specific and volumetric biosorption capacities were observed at influent AR27 concentrations and with LEC bed heights ranging between 50 and 400 mg/L and 2 and 8 cm, respectively. It was also found that if LEC bed height was increased and volumetric flux and AR27 concentration of the influent solution decreased, service and saturation time increased. Modeling results revealed that the Thomas, bed depth service time, Yoon–Nelson, dose-response, and logistic models accurately described the dynamic performance of the packed-bed column in terms of pH, AR27 concentration, and volumetric flux of influent AR27 solution, as well as that of LEC bed height. The findings revealed that LECs exhibited remarkable potential for the biosorption of AR27 from aqueous solutions in a packed-bed column and could potentially be useful for the treatment of AR27-laden wastewater. [ABSTRACT FROM AUTHOR]

This document is a correction notice for an article titled "Design of a sustainable system for wastewater treatment and generation of biofuels based on the biomass of the aquatic plant Eichhornia Crassipes." The original article can be found online at the provided link. The correction addresses an incomplete Funding section and provides the correct information. The research was financed by the government of Cundinamarca and the University Los Libertadores contributed to the development of the article and other processes. The original article has been corrected. The authors of the article are Uriel Fernando Carreño Sayago, Melva Inés Gómez‑Caicedo, and Álvaro Luis Mercado Suárez. [Extracted from the article]

The use of cellulose materials for the adsorption of heavy metals has increased in favorable results to comply with the removal of these contaminants from water, such as the case of Chromium (VI), being one of the most dangerous heavy metals for the environment and human health. The objective of this research is to design and develop a biotreatment with dry and crushed biomass of E. crassipes for the continuous treatment of Chromium (VI), determining through mathematical modeling the Fick diffusion constant (Kf), based on this constant Fick will establish the performance of the biotreatment and the intraparticle diffusion constant (Ks). The diffusion speed (Kf) of the biomass of E. crassipes chemisorbing Cr (VI) of 0.30 cm/min, also it got the constant of the adsorption capacities (Ks) was 0.0198 s. With (Kf) it can design the treatment systems according to caudal or load greatly contaminated, calibrating the parameters how caudal, volume, or area of contact of the system of treatment. Also with (Ks) will be possible the design and modeling of a treatment system to improve the capacity of adsorptions calibrating the density of the particle and the density of the contact bed of the treatment system. Based on Fick's second law, an equation was designed to determine the reliability and performance of water treatment systems through the E. crassipes plant. [ABSTRACT FROM AUTHOR]

This work focuses mainly on environmental concern and protection through providing beneficial use of waste biomass from water hyacinth to produce economical nano-magnetic adsorbent material-efficient for facile oil spill separation via an external magnetic field. The water hyacinth roots showed higher oil spills adsorption affinity of 2.2 g/g compared with 1.2 g/g for shoots. Nano-activated carbon was successfully extracted from the roots of water hyacinth after alkaline activation and followed by zinc chloride treatment before its carbonization. Nano-magnetite was induced into the activated carbonized nanomaterials to synthesized nano-magnetic activated carbon hybrid material (NMAC). X-ray diffraction elucidated the crystalline nature of both extracted activated carbon from water hyacinth and its magnetic hybrid material. Scanning electron microscopic micrographs implied the nano-size of both prepared activated carbon and the magnetite hybrid materials. The magnetic properties of the fabricated nano-magnetic activated carbon were evaluated using the vibrating sample magnetometer. The magnetic nano-hybrid material recorded a maximum oil adsorption affinity of 30.2 g oil/g. The optimum oil spill of 80% was established after 60 min in the presence of 1 g/L of magnetic nano-hybrid. The magnetic nano-hybrid material that absorbs oil spills was separated from the treatment media easily using an external magnetic field. [ABSTRACT FROM AUTHOR]

In this study, a redox precipitation method was used to load manganese dioxide (MnO2) nanoparticles on biochar (BC) (BC@MnO2) pyrolyzed from the invasive water hyacinth, and the adsorption of Cd(II),Cu(II), Zn(II), and Pb(II) was investigated. Several techniques were used to characterize the adsorbents. The results revealed that the BC surface was covered by many intertwined thin amorphous MnO2 nanosheets, which significantly increased its specific surface area and pore volume. The adsorption of heavy metal ions by BC was negligible, whereas the MnO2-containing adsorbents exhibited a high capacity for adsorbing heavy metal ions. However, the MnO2-normalized adsorption amount decreased with increasing MnO2 load and was largely unchanged at MnO2 loads of 26.6% to 30.2%. The capacity for adsorbing heavy metal ions of BC@MnO2 was pH-dependent, but the adsorption affinity was unaffected by coexisting ions. Column tests revealed that BC@MnO2 with a load of 26.6% had a high capacity for removing heavy metal ions from simulated and real electroplating wastewater. Therefore, BC@MnO2 with a load of 26.6% shows promise as a regenerable adsorbent for removing heavy metal ions from water/wastewater. This study could lay an essential foundation to develop a win-win strategy for heavy metal ions removal from wastewater using biochar derived from water hyacinth. [ABSTRACT FROM AUTHOR]