Search

Saline stress has been identified as the primary factor inhibiting rice seedling growth, which represents a complex abiotic stress process. Most plant hormones have been shown to alleviate the plant damage caused by salt stress. The effects of synthetic strigolactone (GR24) on Jinongda 667 rice seedlings treated with 200 mM NaCl were studied. Photosynthesis and its related physiological characteristics were analyzed in salt-stressed rice seedlings treated with GR24. NaCL stress inhibited the growth of the rice, including plant height and root length, by approximately 14% and 40%, respectively. Compared to the control check group (CK), the adverse effects of salt stress on the growth status, leaf photosynthesis, and physiological/biochemical indices in the rice seedlings were alleviated in the GR24 treatment group. With increases in the GR24 concentration, the plant height and root length of the seedlings increased. The plant height in the groups treated with 1/2 Hoagland’s complete nutrient solution + 200 mM NaCl +1 μM GR24 (T4) and 1/2 Hoagland’s complete nutrient solution + 200 mM NaCl +5 μM GR24 (T5) were significantly different than the 1/2 Hoagland’s complete nutrient solution + 200 mM NaCl group (T1) (P 0.05). The transpiration rate, stomatal conductance, and intercellular CO2 concentrations showed the same trends as the net photosynthetic rate. The MAD, POD, and SOD activities were significantly increased by 68%, 60%, 14%, respectively, compared to the CK group (P

A series of phenol-formaldehyde-polyethylene glycol polyether polyols (PF-PEGs) were synthesized through the condensation polymerization and etherification of phenol, formaldehyde, and poly(ethylene glycol) (PEG) under alkaline conditions and subsequently reacted with 1,6-hexamethylene diisocyanate to obtain polyurethane (PU) films using acetone as solvents. The influence of phenol and formaldehyde to PEG mass ratio ((P + F)/PEG) on the hydroxyl number of PF-PEGs and mechanical properties, thermal stabilities, crystallization behaviors, as well as microstructure of polyurethane composite films were studied using chemical analysis, mechanical tests, thermogravimetric analyses (TGA), dynamic mechanical analyses (DMA), X-ray diffraction (XRD), scanning and transmission electron microscopies (SEM and TEM), respectively. Results demonstrated that PF-PEGs with (P + F)/PEG of 50/50 had the highest hydroxyl number of 323 mg K(OH)/g. The incorporation of phenol and formaldehyde into PEG improved the mechanical properties of polyurethane films, glass transition temperature (Tg), and thermal properties but resulted in the brittleness characteristic of the composite films and low crystallization properties. Moreover, the synthesis mechanism of PF-PEGs polyurethane composite films was revealed, which would provide a theoretical base for the preparation of the rigid polyurethane foams based on phenolic resins.

The microalgae-based technology has been developed to reduce biogas slurry nutrients and upgrade biogas simultaneously. In this work, five microalgal strains named Chlorella vulgaris, Scenedesmus obliquus, Selenastrum capricornutum, Nitzschia palea, and Anabaena spiroides under mono- and co-cultivation were used for biogas upgrading. Optimum biogas slurry nutrient reduction could be achieved by co-cultivating microalgae (Chlorella vulgaris, Scenedesmus obliquus, and Nitzschia palea) with fungi using the pelletization technology. In addition, the effects of different ratio of mixed LED light wavelengths applying mixed light-emitting diode during algae strains and fungi co-cultivation on CO2 and biogas slurry nutrient removal efficiency were also investigated. The results showed that the COD (chemical oxygen demand), TN (total nitrogen), and TP (total phosphorus) removal efficiency were 85.82 ± 5.37%, 83.31 ± 4.72%, and 84.26 ± 5.58%, respectively at red: blue = 5:5 under the co-cultivation of S. obliquus and fungi. In terms of biogas upgrading, CH4 contents were higher than 90% (v/v) for all strains, except the co-cultivation with S. obliquus and fungi at red: blue = 3:7. The results indicated that co-cultivation of microalgae with fungi under mixed light wavelengths treatments was most successful in nutrient removal from wastewater and biogas upgrading.

A series of phenol-formaldehyde-polyethylene glycol polyether polyols (PF-PEGs) were synthesized through the condensation polymerization and etherification of phenol, formaldehyde, and poly(ethylene glycol) (PEG) under alkaline conditions and subsequently reacted with 1,6-hexamethylene diisocyanate to obtain polyurethane (PU) films using acetone as solvents. The influence of phenol and formaldehyde to PEG mass ratio ((P + F)/PEG) on the hydroxyl number of PF-PEGs and mechanical properties, thermal stabilities, crystallization behaviors, as well as microstructure of polyurethane composite films were studied using chemical analysis, mechanical tests, thermogravimetric analyses (TGA), dynamic mechanical analyses (DMA), X-ray diffraction (XRD), scanning and transmission electron microscopies (SEM and TEM), respectively. Results demonstrated that PF-PEGs with (P + F)/PEG of 50/50 had the highest hydroxyl number of 323 mg K(OH)/g. The incorporation of phenol and formaldehyde into PEG improved the mechanical properties of polyurethane films, glass transition temperature (T

Three different treatment technologies, namely mono-algae culture, algal-bacterial culture, and algal-fungal culture, were applied to remove pollutants form synthetic domestic sewage and to remove CO2 from biogas in a photobioreactor. The effects of different initial influent C/N ratios on microalgal growth rates and pollutants removal efficiencies by the three microalgal cultures were investigated. The best biogas upgrading and synthetic domestic sewage pollutants removal effect was achieved in the algal-fungal system at the influent C/N ratio of 5:1. At the influent C/N ratio of 5:1, the algal-fungal system achieved the highest mean chemical oxygen demand (COD) removal efficiency of 81.92% and total phosphorus (TP) removal efficiency of 81.52%, respectively, while the algal-bacterial system demonstrated the highest mean total nitrogen (TN) removal efficiency of 82.28%. The average CH4 concentration in upgraded biogas and the removal efficiencies of COD, TN, and TP were 93.25 ± 3.84% (v/v), 80.23 ± 3.92%, 75.85 ± 6.61%, and 78.41 ± 3.98%, respectively. These results will provide a reference for wastewater purification ad biogas upgrading with microalgae based technology.

Two floating treatment wetlands (FTWs) in experimental tanks were compared in terms of their effectiveness on removing nutrients. The results showed that the FTWs were dominated by emergent wetland plants and were constructed to remove nutrients from simulated urban stormwater. Iris pseudacorus and Thalia dealbata wetland systems were effective in reducing the nutrient. T. dealbata FTWs showed higher nutrient removal performance than I. pseudacorus FTWs. Nitrogen (N) and phosphorous (P) removal rates in water by T. dealbata FTWs were 3.95 ± 0.19 and 0.15 ± 0.01 g/m2/day, respectively. For I. pseudacorus FTWs, the TN and TP removal rates were 3.07 ± 0.15 and 0.14 ± 0.01 g/m2/day, respectively. The maximum absolute growth rate for T. dealbata corresponded directly with the maximum mean nutrient removal efficiency during the 5th stage. At harvest, N and P uptak of T. dealbata was 23.354 ± 1.366 g and 1.489 ± 0.077 g per plant, respectively, approximate twice as high as by I. pseudacorus.