Search

Abstract In recent years, Silicene has attracted great interest in various fields but does not fit well in the field of thermoelectrics due to the absence of electronic band gap. Nevertheless, hydrogenation of silicene (SiH) delocalize the free electrons and induces gap widening (2.19 eV), but its thermoelectric performance is still limited due to the larger band gap. Thermoelectric performance can be effectively improved using strain engineering, which allows modulation of crystal as well as electronic energy levels of a material. We studied the effect of biaxial tensile strain on structure, stability and thermoelectric properties of SiH monolayer. Taking clue regarding the stability from phonon dispersion, tensile strain upto 14% is incorporated and results are discussed. The distortion of crystal structure with strain manipulates the characteristics of electronic band structure such that there is an indirect to direct band gap transition along with decrease in band gap, effective mass and relaxation time of carriers. As a result, the Seebeck coefficient falls and attains minimum value at 14% strain while electrical conductivity and electronic thermal conductivity shows increasing trend and maximize at 14% strain. Another crucial consequence of strain is that tensile strain led to a considerable decrease in lattice thermal conductivity. At a strain of 14%, the lattice thermal conductivity at 700 K (0.28) decreased by approximately 43% compared to its unstrained counterpart (0.49 K), which is highly beneficial for achieving high ZT. To assess the efficiency of thermoelectric conversion, the ZT is computed, revealing an increase from 1.66 in the unstrained state to 2.83 at a strain of 14% and a temperature of 700 K. The calculations unveil a nearly twofold increase in ZT with the implementation of strain engineering, underscoring its effectiveness in augmenting the efficiency of thermoelectric devices.

Abstract Fungal Induced Calcium Carbonate Precipitation (FICP) is a novel method used in geotechnical engineering that enhances the engineering properties of sand by using the potential of fungal activity. This research is the first attempt to monitor the strength of FICP treated sand using embedded Piezoelectric (PZT) patch based Electromechanical Impedance (EMI) spectroscopy. In the past, the strength of such treated sand has been determined through the destructive methods like Unconfined Compressive Strength (UCS) test. In this study, the sand is mixed with the filamentous fungus Aspergillus Niger and the cementation solution (urea and $$\:{\text{C}\text{a}\text{C}\text{l}}_{2}$$ in the ratio of 1:1) is injected after every 24 h. Results recorded from the cost-effective EVAL AD5933 chip indicate that the shifting of frequency impedance signals in each phase is in good alignment with UCS and calcium carbonate content (CCC). Following the 28-day treatment period, the treated sand achieves a maximum UCS of 3.93 MPa, accompanied by a CCC of 15.19%. In order to correlate EMI signals with treatment cycles, UCS, and CCC, various multi linear regression (MLR) equations for statistical metrics like root mean square deviation (RMSD), mean absolute percentage deviation (MAPD), and correlation coefficient deviation (CCD) are developed. Additionally, Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) analyses have been conducted to observe the success of the FICP process in the sand.

Abstract The classification of locally rotationally symmetric Bianchi type V spacetime based on its killing vector fields is presented in this paper using an algebraic method. In this approach, a Maple algorithm is employed to transform the Killing’s equations into a reduced evolutive form. Subsequently, the integration of the Killing’s equations is carried out subject to the constraints provided by the algorithm. The algorithm demonstrates that there exist fifteen distinct metrics that could potentially possess Killing vector fields. Upon solving the Killing equations for all fifteen metrics, it is observed that seven out of the fifteen metrics exclusively exhibit the minimum number of Killing vector fields. The remaining eight metrics admit a varying number of Killing vector fields, specifically 6, 7, or 10. The Kretschmann scalar has been computed for each of the obtained metrics, revealing that all of them possess a finite Kretschmann scalar and thus exhibit regular behavior.

Abstract Low-carbon steel (AISI 1010) is the predominant material used in industrial food processing equipment. Such equipment is vulnerable to the corrosive environment produced by various production stages. Different processes, such as sulphonation and carbonation, are used in the processing of sugar in the sugar industry, creating a corrosive atmosphere. The corrosion behavior of low carbon steel (AISI 1010) is strongly influenced by grain size variations, which in turn affect the microstructural mechanical properties of the material. The mechanical behavior and performance of metallic materials, including their corrosion resistance, is determined by grain size which is an important parameter for this phenomena. The impact of low-carbon steel (AISI 1010) microstructure on corrosion behavior is discussed in this work. Heat treatment produces two different types of microstructure from the same material, which are then analyzed. Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) have both been used to study characteristics including morphology and content. By supplying an appropriate corrosive medium, the corrosion performance of several microstructures of low-carbon steel (AISI 1010) was assessed, and corrosion rates were calculated using weight-loss and electrochemical techniques. Results show that the creation of a protective coating with a higher charge transfer resistance is caused by the adsorption process. The variety in phases and grain sizes may contribute to the corrosion stability of different microstructures, and as a result, the corrosion rate lowers as average grain sizes are reduced. Employing the galvanic effect, pearlite increases the rate of ferrite corrosion. The study's findings support the notion that quenching low-carbon steel (AISI 1010) results in a finer grain structure and greater corrosion resistance.

Abstract Direct sewage discharge could cause copious numbers of serious and irreversible harm to the environment. This study investigated the impacts of treated and raw sewage on the river ecosystem. Through our analysis, sewage carried various nutrients into the river, leading to changes in the microbial community in the river and reducing the diversity and richness of bacteria. The relative abundances of Hydrogenophaga, Thauera, Planctomyces, Zoogloea, and Pseudomonas boosted from 0.25, 0.01, 0.00, 0.05, and 0.08% to 3.33, 3.43, 0.02, 6.28, and 2.69%, before and after raw sewage discharge, respectively. The gene abundance of pathogenic bacteria significantly increased after raw sewage discharge. For instance, the gene abundance of Vibrio, Helicobacter, Tuberculosis, and Staphylococcus augmented from 4055, 3797, 13,545, 33 reads at Site-1 to 23,556, 13,163, 19,887, 734 reads at Site-2, respectively. In addition, according to the redundancy analysis (RDA), the infectious pathogens were positively related to the environmental parameters, in which COD showed the highest positive correlation with Mycobacterium tuberculosis. Additionally, river self-purification may contribute to improving water quality and reducing pathogenicity. The outcomes of this study showed that direct discharge brought pathogens and changed microbial community structure of the river.

Abstract In line for semiconducting electronic properties, we systematically scrutinize the likely to be grown half-Heusler compounds XTaZ (X = Pd, Pt and Z = Al, Ga, In) for their stability and thermoelectric properties. The energetically favored F-43m configuration of XTaZ alloys at equilibrium lattice constant is a promising non-magnetic semiconductor reflected from its total valence electron count (N V = 18) and electronic structure calculations. Alongside mechanical stability, the dynamic stability is guaranteed from lattice vibrations and the phonon studies. The energy gaps of these stable Ta-based materials with Z = Ga are estimated to reach as high as 0.46 eV when X = Pd and 0.95 eV when X = Pt; however, this feature is reduced when Z = Al/In and X = Pd/Pt, respectively. Lattice thermal conductivity calculations are achieved to predict the smallest room temperature value of K L = 33.6 W/K (PdTaGa) and 38.0 W/mK (for PtAlGa) among the proposed group of Heusler structures. In the end, we investigated the plausible thermoelectric performance of XTaZ alloys, which announces a comparable difference for the n-type and p-type doping regions. Among the six alloys, PtTaAl, PtTaGa and PtTaIn are predicted to be the most efficient materials where the power factor (PF) elevates up to ~ 90.5, 106.7, 106.5 mW/(K2m), respectively at 900 K; however the lower values are recorded for PdTaAl (~ 66.5), PdTaGa (~ 76.5) and PdTaIn (~ 73.4) alloys. While this reading unlocks avenues for additional assessment of this new class of Half Heuslers, the project approach used here is largely appropriate for possible collection of understandings to realize novel stable materials with potential high temperature applications.

Abstract Nutrient disorder and presence of disease-causing agents in soilless media negatively influence the growth of muskmelon. To combat these issues, use of environmentally-friendly sanitation techniques is crucial for increased crop productivity. The study was conducted under greenhouse and field conditions to investigate the effect of two different sanitation techniques: steaming and formalin fumigation on various media’s characteristics and their impact on muskmelon yield. Media: jantar, guar, wheat straw and rice hull and peat moss of 10% air-filled porosity and sanitized with formalin and steaming. Steaming of guar, jantar, and wheat straw increased the phosphorus (P) and potassium (K) concentrations by 13.80–14.86% and 6.22–8.45% over formalin fumigation. Likewise, P and K concentrations in muskmelon were higher under steaming. Steaming significantly inhibited the survival of Fusarium wilt sp. melonis, root knot nematode sp. meloidogyne and nitrifying bacteria in media than formalin fumigation. In conclusion, steaming decreased the prevalence of nitrifying bacteria and pathogens which thus improved the NO3 −–N:NH4 +–N ratios, P and K nutritional balance both in the media and muskmelon transplants. Hence, steaming as an environment-friendly approach is recommended for soilless media. Further, optimization of steaming for various composts with different crops needs to be investigated with steaming teachnique.

Abstract The present manuscript aims at the synthesis of cesium based halide perovskite nanostructures and the effect of cobalt doping on the structural, optical, lumnisent, charge storage and photocatalytic properties. In a very first attempt, we report the solvothermal synthesis of Co doped CsPbCl3 nanostructures under subcritical conditions. The structural features were demonstrated by X-ray diffraction (XRD) Surface morphology determined cubic shape of the synthesized particles. Doping is an excellent way to modify the properties of host material in particular to the electronic structure or optical properties. Incorporation of Co2+ ions in the perovskite structure tunes the optical properties of the nanostructures making this perovskite a visible light active material (Eg = 1.6 eV). This modification in the optical behaviour is the result of size effect, the crystallite size of the doped nanostructures increases with cobalt doping concentration. Photolumniscance (PL) study indicated that CsPbCl3 exhibited Blue emission. Thermogravametric analysis (TGA) revealed that the nanostructures are quite stable at elavated temperatures. The electrochemical performance depicts the pseudocapacative nature of the synthesized nanostructures and can used for charge storage devices. The charge storage capability showed direct proportionality with cobalt ion concentration. And Finally the photocatalytic performance of synthesized material shows superior catalytic ability degrading 90% of methylene blue (MB) dye in 180 min under visible light conditions.

Abstract Nitrous-oxide emission and nitrate addition from agriculture to earth’s environment are two main agriculture related anthropogenic causes of environmental degradation that needs greater attention. For addressing the aforesaid issue, new techniques/practices need to be developed and implemented. The present investigation, which was focused on this issue, resulted in developing a new mode of nitrogen (N) placement, i.e. ‘mid rib placement upper to corms in two splits (MRPU-2S)’, that could reduce nitrous oxide N emission by around 70.11% and, nitrate N leaching and runoff by around 68.26 and 67.09%, respectively, over conventional method, in saffron growing soils of northwest Himalayas. Besides plummeting environmental degradation, MRPU-2S further resulted in enhancing saffron yield by 33.33% over conventional method. The findings of the present investigation were used to develop new empirical models for predicting saffron yield, nitrate N leaching and nitrous-oxide N emission. The threshold limits of nitrate N leaching and nitrous oxide N emission have also been reported exclusively in the present study.

Abstract Growth and development of cereal crops are linked to weather, day length and growing degree-days (GDDs) which make them responsive to the specific environments in specific seasons. Global temperature is rising due to human activities such as burning of fossil fuels and clearance of woodlands for building construction. The rise in temperature disrupts crop growth and development. Disturbance mainly causes a shift in phenological development of crops and affects their economic yield. Scientists and farmers adapt to these phenological shifts, in part, by changing sowing time and cultivar shifts which may increase or decrease crop growth duration. Nonetheless, climate warming is a global phenomenon and cannot be avoided. In this scenario, food security can be ensured by improving cereal production through agronomic management, breeding of climate-adapted genotypes and increasing genetic biodiversity. In this review, climate warming, its impact and consequences are discussed with reference to their influences on phenological shifts. Furthermore, how different cereal crops adapt to climate warming by regulating their phenological development is elaborated. Based on the above mentioned discussion, different management strategies to cope with climate warming are suggested.

The present manuscript aims at the synthesis of cesium based halide perovskite nanostructures and the effect of cobalt doping on the structural, optical, lumnisent, charge storage and photocatalytic properties. In a very first attempt, we report the solvothermal synthesis of Co doped CsPbCl3 nanostructures under subcritical conditions. The structural features were demonstrated by X-ray diffraction (XRD) Surface morphology determined cubic shape of the synthesized particles. Doping is an excellent way to modify the properties of host material in particular to the electronic structure or optical properties. Incorporation of Co2+ ions in the perovskite structure tunes the optical properties of the nanostructures making this perovskite a visible light active material (Eg = 1.6 eV). This modification in the optical behaviour is the result of size effect, the crystallite size of the doped nanostructures increases with cobalt doping concentration. Photolumniscance (PL) study indicated that CsPbCl3 exhibited Blue emission. Thermogravametric analysis (TGA) revealed that the nanostructures are quite stable at elavated temperatures. The electrochemical performance depicts the pseudocapacative nature of the synthesized nanostructures and can used for charge storage devices. The charge storage capability showed direct proportionality with cobalt ion concentration. And Finally the photocatalytic performance of synthesized material shows superior catalytic ability degrading 90% of methylene blue (MB) dye in 180 min under visible light conditions. [ABSTRACT FROM AUTHOR]