Search

Windows provide access to daylight and outdoor views, influencing building design. Various glazing and window shade materials are used to mitigate glare, overheating and privacy issues, and they affect view clarity. Among them, we evaluated the effect of window films, electrochromic (EC) glass, and fabric shades on view clarity. We conducted an experiment with 50 participants using visual tests adapted from clinical vision tests (visual acuity, contrast sensitivity, color sensitivity) and images displayed on a computer monitor in a controlled laboratory. Window films and EC glass tints outperformed fabric shades in visual acuity, contrast sensitivity and view satisfaction with the exception of the darkest EC tint state and dark grey VLT 3% shade for color sensitivity and view satisfaction. The EC tints pose internal reflection issues and fabric shades are preferred for visual privacy. Window films and EC glass hinder participants blue-green color discrimination while fabric shades also decrease red-yellow color discrimination. Visual acuity predicts view satisfaction and contrast sensitivity is the strongest predictor for visual privacy. Generally, higher visible light transmittance and lower solar reflectance (darker color) enhance human visual performance. The proposed workflow provides an experimental procedure, identifies the primary variables and establishes a predictive framework for assessing view clarity of fenestration.

International building certification systems, such as the WELL and Leadership in Energy and Environmental Design (LEED) standards, play a pivotal role in the design of healthy and sustainable buildings. While LEED adopts a holistic approach to designing healthy and sustainable buildings, the WELL standard has a strong emphasis on human health, comfort, and well-being. Although prior research has revealed inconsistent results for occupant satisfaction in office buildings with WELL certification compared to buildings without WELL certification, or are certified using another certification system (e.g., LEED), most of these comparisons tend to lack methodological rigor. This study used a statistical procedure to match and compare 1634 occupant surveys from LEED-certified buildings to 1634 surveys from WELL-certified buildings. Six important architectural and experiential parameters were matched, masking their influence on the outcome. Overall building and workspace satisfaction was high in both WELL-certified buildings (94% and 87%) and LEED-certified (73% and 71%). We found that there is a 39% higher probability of finding occupants who are more satisfied in WELL-certified buildings compared to LEED-certified buildings, indicating occupant satisfaction is higher in buildings with WELL certification. Although we were unable to pinpoint the reason for higher occupant satisfaction in WELL-certified buildings, the results consistently showed that perceived indoor environmental quality was enhanced across all parameters except for the amount of space.

In high- and middle-income countries, there is a great reliance on heating, ventilation, and air conditioning systems (HVAC) to control the interior thermal environment. However, these systems are expensive to buy, maintain, and operate while being energy and environmentally intensive. Easily-accessible passive and low-energy strategies, such as fans and electrical heated blankets, address these challenges but their comparative effectiveness for providing comfort in sleep environments has not been studied. Using passive strategies in combination with low-energy strategies that elevate air movement like ceiling or pedestal fans enhances the cooling effect by three times compared to using fans alone. We extrapolated our experimental findings to estimate heating and cooling effects in two historical case studies: the 2015 Pakistan heat wave and the 2021 Texas power crisis. Passive and low-energy strategies reduced sleep-time heat or cold exposure by 69-91%. The low-energy strategies we tested require one to two orders of magnitude less energy than HVAC systems, and the passive strategies require no energy input. These strategies can also help reduce peak load surges and total energy demand in extreme temperature events. This reduces the need for utility load shedding, which can put individuals at risk of hazardous heat or cold exposure. Our results may serve as a starting point for evidence-based public health guidelines on how individuals can sleep better during heat waves and cold snaps without relying on HVAC.

Abstract Windows provide access to daylight and outdoor views, influencing building design. Various glazing and window shade materials are used to mitigate glare, overheating and privacy issues, and they affect view clarity. Among them, we evaluated the effect of window films, electrochromic (EC) glass, and fabric shades on view clarity. We conducted an experiment with 50 participants using visual tests adapted from clinical vision tests (visual acuity, contrast sensitivity, color sensitivity) and images displayed on a computer monitor in a controlled laboratory. Window films and EC glass tints outperformed fabric shades in visual acuity, contrast sensitivity and view satisfaction with the exception of the darkest EC tint state and dark grey VLT 3% shade for color sensitivity and view satisfaction. The EC tints pose internal reflection issues and fabric shades are preferred for visual privacy. Window films and EC glass hinder participants’ blue–green color discrimination while fabric shades also decrease red–yellow color discrimination. Visual acuity predicts view satisfaction and contrast sensitivity is the strongest predictor for visual privacy. Generally, higher visible light transmittance and lower solar reflectance (darker color) enhance human visual performance. The proposed workflow provides an experimental procedure, identifies the primary variables and establishes a predictive framework for assessing view clarity of fenestration.

Abstract The study of species groups in which the presence of interspecific hybridization or introgression phenomena is known or suspected involves analysing shared bi-parentally inherited molecular markers. Current methods are based on different categories of markers among which the classical microsatellites or the more recent genome wide approaches for the analyses of thousands of SNPs or hundreds of microhaplotypes through high throughput sequencing. Our approach utilizes intron-targeted amplicon sequencing to characterise multi-locus intron polymorphisms (MIPs) and assess genetic diversity. These highly variable intron regions, combined with inter-specific transferable loci, serve as powerful multiple-SNP markers potentially suitable for various applications, from species and hybrid identification to population comparisons, without prior species knowledge. We developed the first panel of MIPs highly transferable across fish genomes, effectively distinguishing between species, even those closely related, and populations with different structures. MIPs offer versatile, hypervariable nuclear markers and promise to be especially useful when multiple nuclear loci must be genotyped across different species, such as for the monitoring of interspecific hybridization. Moreover, the relatively long sequences obtained ease the development of single-locus PCR-based diagnostic markers. This method, here demonstrated in teleost fishes, can be readily applied to other taxa, unlocking a new source of genetic variation.

Abstract International building certification systems, such as the WELL and Leadership in Energy and Environmental Design (LEED) standards, play a pivotal role in the design of healthy and sustainable buildings. While LEED adopts a holistic approach to designing healthy and sustainable buildings, the WELL standard has a strong emphasis on human health, comfort, and well-being. Although prior research has revealed inconsistent results for occupant satisfaction in office buildings with WELL certification compared to buildings without WELL certification, or are certified using another certification system (e.g., LEED), most of these comparisons tend to lack methodological rigor. This study used a statistical procedure to match and compare 1634 occupant surveys from LEED-certified buildings to 1634 surveys from WELL-certified buildings. Six important architectural and experiential parameters were matched, masking their influence on the outcome. Overall building and workspace satisfaction was high in both WELL-certified buildings (94% and 87%) and LEED-certified (73% and 71%). We found that there is a 39% higher probability of finding occupants who are more satisfied in WELL-certified buildings compared to LEED-certified buildings, indicating occupant satisfaction is higher in buildings with WELL certification. Although we were unable to pinpoint the reason for higher occupant satisfaction in WELL-certified buildings, the results consistently showed that perceived indoor environmental quality was enhanced across all parameters except for the amount of space.

Abstract Sleep is a pillar of human health and wellbeing. In high- and middle-income countries, there is a great reliance on heating, ventilation, and air conditioning systems (HVAC) to control the interior thermal environment in the bedroom. However, these systems are expensive to buy, maintain, and operate while being energy and environmentally intensive—problems that may increase due to climate change. Easily-accessible passive and low-energy strategies, such as fans and electrical heated blankets, address these challenges but their comparative effectiveness for providing comfort in sleep environments has not been studied. We used a thermal manikin to experimentally show that many passive and low-energy strategies are highly effective in supplementing or replacing HVAC systems during sleep. Using passive strategies in combination with low-energy strategies that elevate air movement like ceiling or pedestal fans enhances the cooling effect by three times compared to using fans alone. We extrapolated our experimental findings to estimate heating and cooling effects in two historical case studies: the 2015 Pakistan heat wave and the 2021 Texas power crisis. Passive and low-energy strategies reduced sleep-time heat or cold exposure by 69–91%. The low-energy strategies we tested require one to two orders of magnitude less energy than HVAC systems, and the passive strategies require no energy input. These strategies can also help reduce peak load surges and total energy demand in extreme temperature events. This reduces the need for utility load shedding, which can put individuals at risk of hazardous heat or cold exposure. Our results may serve as a starting point for evidence-based public health guidelines on how individuals can sleep better during heat waves and cold snaps without relying on HVAC.

Abstract Precision livestock farming technologies are used to monitor animal health and welfare parameters continuously and in real time in order to optimize nutrition and productivity and to detect health issues at an early stage. The possibility of predicting blood metabolites from milk samples obtained during routine milking by means of infrared spectroscopy has become increasingly attractive. We developed, for the first time, prediction equations for a set of blood metabolites using diverse machine learning methods and milk near-infrared spectra collected by the AfiLab instrument. Our dataset was obtained from 385 Holstein Friesian dairy cows. Stacking ensemble and multi-layer feedforward artificial neural network outperformed the other machine learning methods tested, with a reduction in the root mean square error of between 3 and 6% in most blood parameters. We obtained moderate correlations (r) between the observed and predicted phenotypes for γ-glutamyl transferase (r = 0.58), alkaline phosphatase (0.54), haptoglobin (0.66), globulins (0.61), total reactive oxygen metabolites (0.60) and thiol groups (0.57). The AfiLab instrument has strong potential but may not yet be ready to predict the metabolic stress of dairy cows in practice. Further research is needed to find out methods that allow an improvement in accuracy of prediction equations.

Abstract Growth in energy use for indoor cooling tripled between 1990 and 2016 to outpace any other end use in buildings. Part of this energy demand is wasted on excessive cooling of offices, a practice known as overcooling. Overcooling has been attributed to poorly designed or managed air-conditioning systems with thermostats that are often set below recommended comfort temperatures. Prior research has reported lower thermal comfort for women in office buildings, but there is insufficient evidence to explain the reasons for this disparity. We use two large and independent datasets from US buildings to show that office temperatures are less comfortable for women largely due to overcooling. Survey responses show that uncomfortable temperatures are more likely to be cold than hot regardless of season. Crowdsourced data suggests that overcooling is a common problem in warm weather in offices across the US. The associated impacts of this pervasive overcooling on well-being and performance are borne predominantly by women. The problem is likely to increase in the future due to growing demand for cooling in increasingly extreme climates. There is a need to rethink the approach to air-conditioning office buildings in light of this gender inequity caused by overcooling.

Abstract Notwithstanding the advancement of modern bionic hands and the large variety of prosthetic hands in the market, commercial devices still present limited acceptance and percentage of daily use. While commercial prostheses present rigid mechanical structures, emerging trends in the design of robotic hands are moving towards soft technologies. Although this approach is inspired by nature and could be promising for prosthetic applications, there is scant literature concerning its benefits for end-users and in real-life scenarios. In this work, we evaluate and assess the role and the benefits of soft robotic technologies in the field of prosthetics. We propose a thorough comparison between rigid and soft characteristics of two poly-articulated hands in 5 non-expert myo-electric prosthesis users in pre- and post-therapeutic training conditions. The protocol includes two standard functional assessments, three surveys for user-perception, and three customized tests to evaluate the sense of embodiment. Results highlight that rigid hands provide a more precise grasp, while soft properties show higher functionalities thanks to their adaptability to different requirements, intuitive use and more natural execution of activities of daily living. This comprehensive evaluation suggests that softness could also promote a quick integration of the system in non-expert users.

Abstract Metabolic disorders, including hepatic lipidosis and ketosis, severely affect animal health status and welfare with a large economic burden in dairy herds. The gold standard for diagnosing hepatic lipidosis is the liver biopsy, which is impractical and invasive for the screening at farm level. Ultrasound (US) imaging is a promising technique for identifying liver dysfunction, but standardized specifications in physiological conditions are needed. Herein, we described the features of four US measurements, namely the liver predicted triacylglycerol (pTAG) content, liver depth (LD), and portal vein area (PVA) and depth (PVD) and we investigated their associations with a set of hematochemical (HC) indicators in 342 clinically healthy Holstein Friesian dairy cows. Liver pTAG content was negatively associated with hematocrit and positively with globulin, whereas PVA was negatively associated with thiol group levels, and LD positively with ceruloplasmin. We found significant interactions between some HC parameters and parity: in particular, creatinine, thiol groups and globulin for PVA, and aspartate aminotransferase, paraoxonase and ceruloplasmin for PVD. This study offers new insights on variations in liver function occurring after calving and pave the way for the potential use of minimally invasive techniques for prompt detection of metabolic disorders in dairy herds.

Abstract Liver cirrhosis is often complicated by an immunological imbalance known as cirrhosis-associated immune dysfunction. This study aimed to investigate disturbances in circulating monocytes and dendritic cells in patients with acute decompensation (AD) of cirrhosis. The sample included 39 adult cirrhotic patients hospitalized for AD, 29 patients with stable cirrhosis (SC), and 30 healthy controls (CTR). Flow cytometry was used to analyze monocyte and dendritic cell subsets in whole blood and quantify cytokines in plasma samples. Cirrhotic groups showed higher frequencies of intermediate monocytes (iMo) than CTR. AD patients had lower percentages of nonclassical monocytes than CTR and SC. Cirrhotic patients had a profound reduction in absolute and relative dendritic cell numbers compared with CTR and showed higher plasmacytoid/classical dendritic cell ratios. Increased plasma levels of IL-6, IL-10, and IL-17A, elevated percentages of CD62L+ monocytes, and reduced HLA-DR expression on classical monocytes (cMo) were also observed in cirrhotic patients. Patients with more advanced liver disease showed increased cMo and reduced tissue macrophages (TiMas) frequencies. It was found that cMo percentages greater than 90.0% within the monocyte compartment and iMo and TiMas percentages lower than 5.7% and 8.6%, respectively, were associated with increased 90-day mortality. Monocytes and dendritic cells are deeply altered in cirrhotic patients, and subset profiles differ between stable and advanced liver disease. High cMo and low TiMas frequencies may be useful biomarkers of disease severity and mortality in liver cirrhosis.

Abstract In this work we investigate the role of threading dislocations in nitride light emitters with different indium composition. We compare the properties of laser diodes grown on the low defect density GaN substrate with their counterparts grown on sapphire substrate in the same epitaxial process. All structures were produced by metalorganic vapour phase epitaxy and emit light in the range 383–477 nm. We observe that intensity of electroluminescence is strong in the whole spectral region for devices grown on GaN, but decreases rapidly for the devices on sapphire and emitting at wavelength shorter than 420 nm. We interpret this behaviour in terms of increasing importance of dislocation related nonradiative recombination for low indium content structures. Our studies show that edge dislocations are the main source of nonradiative recombination. We observe that long wavelength emitting structures are characterized by higher average light intensity in cathodoluminescence and better thermal stability. These findings indicate that diffusion path of carriers in these samples is shorter, limiting the amount of carriers reaching nonradiative recombination centers. According to TEM images only mixed dislocations open into the V-pits, usually above the multi quantum wells thus not influencing directly the emission.