Search

Simultaneous imaging of the SPECT tracer 131I and PET tracer 18F is important in the diagnosis of high- and low-grade thyroid cancers because high-grade thyroid cancers have high 18F-FDG and low 131I uptake, while low-grade thyroid cancers have high 131I and low 18F-FDG uptake. In this study, Na131I and 18F-FDG were simultaneously imaged using the Compton-PET system, in vivo. The angular resolution and sensitivity of the Compton camera with 356 keV gamma ray measured using a 133Ba point source were 12.3° and 2 × 10−5, respectively. The spatial resolution and sensitivity of PET were measured with a 22Na point source. The transaxial and axial spatial resolutions of the PET at the center of the FOV were 1.15 mm and 2.04 mm, respectively. Its sensitivity was 1.2 × 10−4. In-vivo images of the 18F and 131I isotopes were simultaneously acquired from mice. These showed that 18F-FDG was active in the heart, brown fat, and brain, while Na131I was active in the thyroid, stomach, and bladder. Artifacts were found in the Compton camera images when the activity of 131I was much lower than that of 18F. This study demonstrates the potential of simultaneous clinical imaging of 18F and 131I. [ABSTRACT FROM AUTHOR]

Two-dimensional (2D) materials beyond graphene have attracted considerable interest because of the zero bandgap drawbacks of graphene. Transition metal dichalcogenides (TMDs), such as MoS 2 and WSe 2 , are the potential candidates for next 2D materials because atomically thin layers of TMDs exhibit unique and versatile electrical and optical properties. Although bulk TMDs materials have an indirect bandgap, an indirect-to-direct bandgap transition is observed in monolayers of TMDs (MoS 2 , WSe 2 , and MoSe 2 ). Optical properties of TMD films can be improved by the introduction of structural defects. For example, large-area spatial tuning of the optical transition of bulk MoS 2 films is achieved by using an anodic aluminum oxide (AAO) template to induce structural defects such as edge- and terrace-terminated defects in a nanomesh structure. Strong photoluminescence emission peaks with a band gap of 1.81 eV are observed, possibly because of radiative transition at the defect sites. This work shows that the AAO template lithography method has potential for the production of homogenous large-scale nanomesh structures for practical semiconductor processing applications in future MoS 2 -based electronic and optical devices.

In this study, we employ a combination of various in-situ surface analysis techniques to investigate the thermally induced degradation processes in MAPbI 3 perovskite solar cells (PeSCs) as a function of temperature under air-free conditions (no moisture and oxygen). Through a comprehensive approach that combines in-situ grazing-incidence wide-angle X-ray diffraction (GIWAXD) and high-resolution X-ray photoelectron spectroscopy (HR-XPS) measurements, we confirm that the surface structure of MAPbI 3 perovskite film changes to an intermediate phase and decomposes to CH 3 I, NH 3 , and PbI 2 after both a short (20 min) exposure to heat stress at 100 °C and a long exposure (>1 hour) at 80 °C. Moreover, we observe clearly the changes in the orientation of CH 3 NH 3 + organic cations with respect to the substrate in the intermediate phase, which might be linked directly to the thermal degradation processes in MAPbI 3 perovskites. These results provide important progress towards improved understanding of the thermal degradation mechanisms in perovskite materials and will facilitate improvements in the design and fabrication of perovskite solar cells with better thermal stability.

Organic-inorganic hybrid perovskite solar cells (PSCs) have been extensively studied because of their outstanding performance: a power conversion efficiency exceeding 22% has been achieved. The most commonly used PSCs consist of CH 3 NH 3 PbI 3 (MAPbI 3 ) with a hole-selective contact, such as 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9-spiro-bifluorene (spiro-OMeTAD), for collecting holes. From the perspective of long-term operation of solar cells, the cell performance and constituent layers (MAPbI 3 , spiro-OMeTAD, etc.) may be influenced by external conditions like temperature, light, etc. Herein, we report the effects of temperature on spiro-OMeTAD and the interface between MAPbI 3 and spiro-OMeTAD in a solar cell. It was confirmed that, at high temperatures (85 °C), I - and CH 3 NH 3 + (MA + ) diffused into the spiro-OMeTAD layer in the form of CH 3 NH 3 I (MAI). The diffused I - ions prevented oxidation of spiro-OMeTAD, thereby degrading the electrical properties of spiro-OMeTAD. Since ion diffusion can occur during outdoor operation, the structural design of PSCs must be considered to achieve long-term stability.