Search

Several types of green photosynthetic microalgae can grow through the process of heterotrophic growth in the dark with the help of a carbon source instead of the usual light energy. Heterotrophic growth overcomes important limitations in the production of valuable products from microalgae, such as the reliance on light, which complicates the process, raises costs, and lowers the yield of potentially useful products. The present study was conducted to explore the potential growth of green microalga Scenedesmus obliquus under mixotrophic and heterotrophic conditions utilizing Disperse orange 2RL Azo dye as a carbon source to produce a high lipid content and the maximum dye removal percentage. After 7 days of algal growth with dye under mixotrophic and heterotrophic conditions with varying pH levels (5, 7, 9, and 11), KNO3 concentrations (1, 1.5, 2, and 3 g/L), and dye concentrations (20, 40, and 60 ppm); dye removal percentage, algal dry weight, and lipid content were determined. The results showed that the highest decolorization of Disperse orange 2RL Azo dye (98.14%) was attained by S. obliquus in heterotrophic medium supplemented with glucose at the optimal pH 11 when the nitrogen concentration was 1 g/L and the dye concentration was 20 ppm. FT-IR spectroscopy of the dye revealed differences in peaks position and intensity before and after algal treatment. S. obliquus has a high concentration of oleic acid, which is enhanced when it is grown with Disperse orange 2RL Azo dye, making it ideal for production of high-quality biodiesel. In general, and in the vast majority of instances, heterotrophic cultivation is substantially less expensive, easier to set up, and requires less maintenance than mixotrophic cultivation. Heterotrophic cultivation allows for large-scale applications such as separate or mixed wastewater treatment along with biofuel production. [ABSTRACT FROM AUTHOR]

Over the last decade, an extensive range of consumer products containing manufactured silver nanoparticles (AgNPs) have been progressively used. The unfitting usage and discharge of these materials can enable passage of AgNPs into the aquatic ecosystem causing prospective toxicological consequence. The present study shed new lights on the phycotoxicity of small (8.47–17.66 nm) and stable Oscillatoria reduced gelatin-capped silver nanoparticles (OG-AgNPs) fabricated using a completely green synthetic technique. In this work, estimating of the possible toxic effects of OG-AgNPs on two freshwater microalgae Chlorella vulgaris and Chlorella minutissima was carried. This study found that, the growth of cells and photosynthetic pigment inhibitory effects of OG-AgNPs exhibit a significant increase with increasing time and concentration compared to control. Based on the IC50 value C. vulgaris (3.705 μg/mL) was found to be more sensitive to OG-AgNPs than C. minutissima (5.8 μg/mL). This study revealed that OG-AgNPs exhibit potent phycotoxic effect against Chlorella species. Finally, the negative effect of OG-AgNPs on aquatic algae and these modifications might have severe effects on structure and function of aquatic ecosystems. Besides, the biosynthesized OG-AgNPs showed a catalytic activity in the reduction of hydrogen peroxide, one of the reactive oxygen species that represent a major threat to biological systems. This method pretends an auspicious non-skill dependent technique with a good sensitivity for determination of H2O2 concentration, particularly at trace ppm level for applying in numerous domains such as medical and industrial processes. [ABSTRACT FROM AUTHOR]

Microalgae are a diverse group of microorganisms, the majority of which are photosynthetic in nature. Microalgae have different applications, the most important of which is the biological treatment of wastewater. Microalgae grow in various types of wastewater, such as wastewater polluted by Azo dyes, due to microalgae using wastewater as a culture medium, which contains many nutrients like nitrogen, phosphate, and carbon sources. Microalgae grow in various types of wastewater, such as wastewater polluted by Azo dyes, due to microalgae using wastewater as a culture medium, which contains many nutrients like nitrogen, phosphate, and carbon sources. So, microalgae are used for bioremediation of wastewater due to the efficiency of growing in wastewater and for the high production of lipids followed by trans-esterification to biodiesel. Face-centered central composite design (FCCCD) was used to determine the factors that have the most significant impact on the simultaneous decolorization of methyl red and lipid production by the fresh green alga Scenedesmus obliquus. The predicted results indicated that the alga decolorized 70.15% methyl red and produced 20.91% lipids by using 1 g/L nitrogen, an incubation time of 10 days, a pH of 8, and the concentration of methyl red is 17.65 mg/L. The dry biomasses of S. obliquus were also examined by SEM and FTIR before and after treatment with methyl red. SEM and FTIR showed that the properties of dry S. obliquus were altered after the biosorption of methyl red. According to GC–MS analysis of hexane extracts of S. obliquus, the lipid profile differed before and after methyl red decolorization. The results proved that it is possible to use S. obliquus to remove dyes and produce renewable fuels such as biodiesel. The novelty of this study is that this is the first time in which the effect of nitrogen concentrations in the medium used for algal growth on the removal of dye has been studied. [ABSTRACT FROM AUTHOR]

Microalgae are a diverse group of microorganisms, the majority of which are photosynthetic in nature. Microalgae have different applications, the most important of which is the biological treatment of wastewater. Microalgae grow in various types of wastewater, such as wastewater polluted by Azo dyes, due to microalgae using wastewater as a culture medium, which contains many nutrients like nitrogen, phosphate, and carbon sources. Microalgae grow in various types of wastewater, such as wastewater polluted by Azo dyes, due to microalgae using wastewater as a culture medium, which contains many nutrients like nitrogen, phosphate, and carbon sources. So, microalgae are used for bioremediation of wastewater due to the efficiency of growing in wastewater and for the high production of lipids followed by trans-esterification to biodiesel. Face-centered central composite design (FCCCD) was used to determine the factors that have the most significant impact on the simultaneous decolorization of methyl red and lipid production by the fresh green alga Scenedesmus obliquus. The predicted results indicated that the alga decolorized 70.15% methyl red and produced 20.91% lipids by using 1 g/L nitrogen, an incubation time of 10 days, a pH of 8, and the concentration of methyl red is 17.65 mg/L. The dry biomasses of S. obliquus were also examined by SEM and FTIR before and after treatment with methyl red. SEM and FTIR showed that the properties of dry S. obliquus were altered after the biosorption of methyl red. According to GC–MS analysis of hexane extracts of S. obliquus, the lipid profile differed before and after methyl red decolorization. The results proved that it is possible to use S. obliquus to remove dyes and produce renewable fuels such as biodiesel. The novelty of this study is that this is the first time in which the effect of nitrogen concentrations in the medium used for algal growth on the removal of dye has been studied. [ABSTRACT FROM AUTHOR]

Remazol brilliant blue (RBB) is an anthraquinone anionic dye that has several commercial uses, especially in the textile industries and is well-known for its detrimental impacts on marine life and the surrounding ecosystem. Mercury (Hg2+) is also one of the most severe hazardous environmental contaminants due to its bioaccumulation through the food chain and high toxicity to the human embryo and fetus. The biosorption potential of Gelidium corneum biomass for bioremoval of Hg2+ and RBB dye simultaneously from binary mixture was assessed. The effects of initial pH, contact time, Hg2+, RBB, and biomass concentrations on the biosorption process were investigated in 50 batch experiments using a Face-centered central composite design. The maximum removal percentage of Hg2+ (98.25%) was achieved in the run no. 14, under optimum experimental conditions: 200 mg/L Hg2+, 75 mg/L RBB, pH 5. At 30 °C, 4 g/L algal biomass was used, with a contact time of 180 min. Whereas, the maximum removal percentage of RBB (89.18%) was obtained in the run no. 49 using 200 mg/L Hg2+, 100 mg/L RBB, pH 5, 4 g/L algal biomass and 180 min of contact time. FTIR analysis of Gelidium corneum biomass surface demonstrated the presence of many functional groups that are important binding sites responsible for Hg2+ and RBB biosorption. SEM analysis showed apparent morphological alterations including surface shrinkage and the appearance of new shiny adsorbate ion particles on the Gelidium corneum biomass surface after the biosorption process. The EDX study reveals an additional optical absorption peak for Hg2+, confirming the role of Gelidium corneum biomass in Hg2+ biosorption. In conclusion, Gelidium corneum biomass has been shown to be an eco-friendly, sustainable, promising, cost-effective and biodegradable biosorbent to simultaneously biosorb Hg2+ and RBB dye from aquatic ecosystems. [ABSTRACT FROM AUTHOR]

Because of the increased amount of cobalt and Congo red dye effluents attributable to the industrial operations, the capacity of Enteromorpha intestinalis biomass as a sustainable source to achieve significant biosorption percent for both pollutants from dual solution was assessed. A fifty batch FCCCD experiments for biosorption of cobalt ions and Congo red dye were performed. The complete removal of Congo red dye was obtained at 36th run using an initial pH value of 10, 1.0 g/L of Enteromorpha intestinalis biomass, 100 and 200 mg/L of Congo red and cobalt for a 20-min incubation time. Meanwhile, a cobalt removal percent of 85.22 was obtained at 35th run using a neutral pH of 7.0, 3.0 g/L of algal biomass, 150 and 120 mg/L of Congo red, and cobalt for a 60-min incubation time. For further illustration and to interpret how the biosorption mechanism was performed, FTIR analysis was conducted to inspect the role of each active group in the biosorption process, it can be inferred that –OH, C–H, C=O, O–SO3- and C–O–C groups were mainly responsible for Co2+ adsorption of from aqueous dual solution. Also, scan electron microscope revealed the appearance of new shiny particles biosorbed on E. intestinalis surface after the biosorption process. EDS analysis proved the presence of Co2+ on the algal surface after the biosorption process. [ABSTRACT FROM AUTHOR]

Endoglucanase producing bacteria were isolated from Egyptian soils and the most active bacterial strain was identified as Bacillus subtilis strain Fatma/1. Plackett–Burman statistical design was carried out to assess the effect of seven process variables on endoglucanase production. Carboxymethyl cellulose (CMC), yeast extract and peptone were the most significant variables that enhanced the endoglucanase production and thus were selected for further optimization using face-centered central composite design. The highest yield of endoglucanase (32.37 U/mL) was obtained in run no. 9, using 18 g/L CMC, 8 g/L peptone, 7 g/L yeast extract and 0.1 g/L FeSO4.7H2O. The optimized medium showed about eightfold increase in endoglucanase production compared to the unoptimized medium. The produced crude enzyme was further purified by ammonium sulfate precipitation, then DEAE-Sepharose CL6B column. The purified enzyme was shown to have a molecular weight of 37 kDa. The enzyme showed maximum activity at pH 8.0, temperature of 50 °C, incubation time of 60 min. The half-life time (T1/2) was 139.53 min at 50 °C, while being 82.67 min at 60 °C. Endoglucanase at concentration of 12 U/mL effectively removed 84.61% of biofilm matrix of Pseudomonas aeruginosa with marked reduction in carbohydrate content of the biofilm from 63.4 to 7.9 μg. [ABSTRACT FROM AUTHOR]

Textile wastewater contains large quantities of azo dyes mixed with various contaminants especially heavy metal ions. The discharge of effluents containing methyl orange (MO) dye and Cu2+ ions into water is harmful because they have severe toxic effects to humans and the aquatic ecosystem. The dried algal biomass was used as a sustainable, cost-effective and eco-friendly for the treatment of the textile wastewater. Box–Behnken design (BBD) was used to identify the most significant factors for achieving maximum biosorption of Cu2+ and MO from aqueous solutions using marine alga Fucus vesiculosus biomass. The experimental results indicated that 3 g/L of F. vesiculosus biomass was capable of removing 92.76% of copper and 50.27% of MO simultaneously from aqueous solution using MO (60 mg/L), copper (200 mg/L) at pH 7 within 60 min with agitation at 200 rpm. The dry biomass was also investigated using SEM, EDS, and FTIR before and after MO and copper biosorption. FTIR, EDS and SEM analyses revealed obvious changes in the characteristics of the algal biomass as a result of the biosorption process. The dry biomass of F. vesiculosus can eliminate MO and copper ions from aquatic effluents in a feasible and efficient method. [ABSTRACT FROM AUTHOR]

A large number of industries use heavy metal cations to fix dyes in fabrication processes. Malachite green (MG) is used in many factories and in aquaculture production to treat parasites, and it has genotoxic and carcinogenic effects. Chromium is used to fix the dyes and it is a global toxic heavy metal. Face centered central composite design (FCCCD) has been used to determine the most significant factors for enhanced simultaneous removal of MG and chromium ions from aqueous solutions using marine green alga Enteromorpha intestinalis biomass collected from Jeddah beach. The dry biomass of E. intestinalis samples were also examined using SEM and FTIR before and after MG and chromium biosoptions. The predicted results indicated that 4.3 g/L E. intestinalis biomass was simultaneously removed 99.63% of MG and 93.38% of chromium from aqueous solution using a MG concentration of 7.97 mg/L, the chromium concentration of 192.45 mg/L, pH 9.92, the contact time was 38.5 min with an agitation of 200 rpm. FTIR and SEM proved the change in characteristics of algal biomass after treatments. The dry biomass of E. intestinalis has the capacity to remove MG and chromium from aquatic effluents in a feasible and efficient manner. [ABSTRACT FROM AUTHOR]

An amendment to this paper has been published and can be accessed via a link at the top of the paper. [ABSTRACT FROM AUTHOR]

Using aqueous cyanobacterial extracts in the synthesis of silver nanoparticle is looked as green, ecofriendly, low priced biotechnology that gives advancement over both chemical and physical methods. In the current study, an aqueous extract of Oscillatoria limnetica fresh biomass was used for the green synthesis of Ag-NPs, since O. limnetica extract plays a dual part in both reducing and stabilizing Oscillatoria-silver nanoparticles (O-AgNPs). The UV-Visible absorption spectrum, Fourier transforms infrared (FT-IR), transmission electron microscopy (TEM) and scanning electron microscope (SEM) were achieved for confirming and characterizing the biosynthesized O-AgNPs. TEM images detected the quasi-spherical Ag-NPs shape with diverse size ranged within 3.30–17.97 nm. FT-IR analysis demonstrated the presence of free amino groups in addition to sulfur containing amino acid derivatives acting as stabilizing agents as well as the presence of either sulfur or phosphorus functional groups which possibly attaches silver. In this study, synthesized Ag-NPs exhibited strong antibacterial activity against multidrug-resistant bacteria (Escherichia coli and Bacillus cereus) as well as cytotoxic effects against both human breast (MCF-7) cell line giving IC50 (6.147 µg/ml) and human colon cancer (HCT-116) cell line giving IC50 (5.369 µg/ml). Hemolytic activity of Ag-NPs was investigated and confirmed as being non- toxic to human RBCs in low concentrations. [ABSTRACT FROM AUTHOR]

Paecilomyces variotii xylanase was, produced in stirred tank bioreactor with yield of 760 U/mL and purified using 70% ammonium sulfate precipitation and ultra-filtration causing 3.29-fold purification with 34.47% activity recovery. The enzyme purity was analyzed on sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE) confirming its monomeric nature as single band at 32 KDa. Zymography showed xylan hydrolysis activity at the same band. The purified enzyme had optimum activity at 60 °C and pH 5.0. The pH stability range was 5–9 and the temperature stability was up 70 °C. Fe2+and Fe3+ exhibited inhibition of xylanase enzyme while Cu2+, Ca2+, Mg2+ and Mn2+ stimulated its activity. Mercaptoethanol stimulated its activity; however, Na2-EDTA and SDS inhibited its activity. The purified xylanase could hydrolyze beechwood xylan but not carboxymethyl cellulose (CMC), avicel or soluble starch. Paecilomyces variotii xylanase Km and Vmax for beechwood were determined to be 3.33 mg/mL and 5555 U/mg, respectively. The produced xylanase enzyme applied on beech xylan resulted in different types of XOS. The antioxidant activity of xylo-oligosaccharides increased from 15.22 to 70.57% when the extract concentration was increased from 0.1 to 1.5 mg/mL. The enzyme characteristics and kinetic parameters indicated its high efficiency in the hydrolysis of xylan and its potential effectiveness in lignocellulosic hydrolysis and other industrial application. It also suggests the potential of xylanase enzyme for production of XOS from biomass which are useful in food and pharmaceutical industries. [ABSTRACT FROM AUTHOR]

Cadmium is a global heavy metal pollutant. Marine green algae were used as efficient, low cost and eco-friendly biosorbent for cadmium ions removal from aqueous solutions. Plackett-Burman design was applied to determine the most significant factors for maximum cadmium removal from aqueous solutions using dry Ulva fasciata biomass. The most significant factors affecting cadmium removal process were further optimized by the face centered central composite design. The results indicated that 4 g of dry Ulva fasciata biomass was found to successfully remove 99.96% of cadmium from aqueous solution under the conditions of 200 mg/L of initial cadmium concentration at pH 5, 25 °C for 60 min of contact time with static condition. Dry Ulva fasciata biomass samples before and after cadmium biosorption were analyzed using SEM, EDS and FTIR. Furthermore, the immobilized biomass in sodium alginate-beads removed 99.98% of cadmium from aqueous solution at an initial concentration of 200 mg/L after 4 h which is significantly higher than that for control using sodium alginate beads without incorporation of the algal biomass (98.19%). Dry biomass of Ulva fasciata was proven to be cost-effective and efficient to eliminate heavy metals especially cadmium from aquatic effluents and the process is feasible, reliable and eco-friendly. [ABSTRACT FROM AUTHOR]

Paracetamol is extensively consumed as an analgesic and antipyretic drug, but at a high dose level, it leads to deleterious side effects, such as hepatic and nephrotoxicity. This research aimed to estimate the prophylactic efficacy of Chlorella vulgaris and/or thiamine against paracetamol (P) induced hepatorenal and cardiac toxicity. Forty-eight female Wistar rats were randomly divided into eight equal groups (n = 6 rats). Group 1, normal control group. Group 2, Paracetamol group. Groups 3, 4 and 5 were treated with Silymarin drug, Chlorella vulgaris alga, Chlorella vulgaris alga supplemented with thiamine, respectively daily for 7 successive days, then all were administered Paracetamol (2gm/kg. bwt.). While, Groups 6, 7 and 8 were treated by Silymarin, Chlorella vulgaris alga, Chlorella vulgaris supplemented with thiamine, respectively daily for 7 successive days without paracetamol administration. Our results clarified that Paracetamol toxicity caused significant adverse effects on hematological, serum biochemical parameters, and oxidant -antioxidant status as well as histopathological picture of heart, liver, and kidney. However, in the Paracetamol intoxicated groups pretreatment either with Chlorella vulgaris alone or plus thiamine successfully improved the undesirable deleterious effects of paracetamol, and restored almost all variables to near their control levels. This study has finished to that oxidative stress participates in the pathogenesis of paracetamol-induced toxicity in rats and using Chlorella vulgaris alga either alone or plus thiamine alongside their health benefits can protect against oxidative harmful effects induced by paracetamol through their free radical scavenging and powerful antioxidant effects, and they can be used as propylactic agents against paracetamol-induced toxicity. [ABSTRACT FROM AUTHOR]