Search

Abstract Investigating biodegradable and biocompatible materials for electronic applications can lead to tangible outcomes such as developing green-electronic devices and reducing the amount of e-waste. The proposed emulsion-based conducting ink formulation takes into consideration circular economy and green principles throughout the entire process, from the selection of materials to the production process. The ink is formulated using the biopolymer polylactic acid dissolved in a sustainable solvent mixed with water, along with conductive carbon nanotubes (CNTs) and silver flakes as fillers. Hybrid conductive fillers can lower the percolation threshold of the ink and the production costs, while maintaining excellent electrical properties. The coating formed after the deposition of the ink, undergoes isothermal treatment at different temperatures and durations to improve its adhesion and electrical properties. The coating’s performance was evaluated by creating an eight-finger interdigitated sensor using a Voltera PCB printer. The sensor demonstrates exceptional performance when exposed to various loading and unloading pressures within the 0.2–500.0 kPa range. The results show a consistent correlation between the change in electrical resistance and the stress caused by the applied load. The ink is biodegradable in marine environments, which helps avoiding its accumulation in the ecosystem over time.

Abstract The underutilization of digestate-derived polymers presents a pressing environmental concern as these valuable materials, derived from anaerobic digestion processes, remain largely unused, contributing to pollution and environmental degradation when left unutilized. This study explores the recovery and utilization of biodegradable polymers from biomass anaerobic digestate to enhance the performance of solar photovoltaic (PV) cells while promoting environmental sustainability. The anaerobic digestion process generates organic residues rich in biodegradable materials, often considered waste. However, this research investigates the potential of repurposing these materials by recovering and transforming them into high-quality coatings or encapsulants for PV cells. The recovered biodegradable polymers not only improve the efficiency and lifespan of PV cells but also align with sustainability objectives by reducing the carbon footprint associated with PV cell production and mitigating environmental harm. The study involves a comprehensive experimental design, varying coating thickness, direct normal irradiance (DNI) (A), dry bulb temperature (DBT) (B), and relative humidity (C) levels to analyze how different types of recovered biodegradable polymers interact with diverse environmental conditions. Optimization showed that better result was achieved at A = 8 W/m2, B = 40 °C and C = 70% for both the coated material studied. Comparative study showed that for enhanced cell efficiency and cost effectiveness, EcoPolyBlend coated material is more suited however for improving durability and reducing environmental impact NanoBioCelluSynth coated material is preferable choice. Results show that these materials offer promising improvements in PV cell performance and significantly lower environmental impact, providing a sustainable solution for renewable energy production. This research contributes to advancing both the utilization of biomass waste and the development of eco-friendly PV cell technologies, with implications for a more sustainable and greener energy future. This study underscores the pivotal role of exploring anaerobic digestate-derived polymers in advancing the sustainability and performance of solar photovoltaic cells, addressing critical environmental and energy challenges of our time.Please confirm if the author names are presented accurately and in the correct sequence (given name, middle name/initial, family name). Author 7 Given name: [Ashok] Last name [Kumar Yadav]. Also, kindly confirm the details in the metadata are correct.correct

The underutilization of digestate-derived polymers presents a pressing environmental concern as these valuable materials, derived from anaerobic digestion processes, remain largely unused, contributing to pollution and environmental degradation when left unutilized. This study explores the recovery and utilization of biodegradable polymers from biomass anaerobic digestate to enhance the performance of solar photovoltaic (PV) cells while promoting environmental sustainability. The anaerobic digestion process generates organic residues rich in biodegradable materials, often considered waste. However, this research investigates the potential of repurposing these materials by recovering and transforming them into high-quality coatings or encapsulants for PV cells. The recovered biodegradable polymers not only improve the efficiency and lifespan of PV cells but also align with sustainability objectives by reducing the carbon footprint associated with PV cell production and mitigating environmental harm. The study involves a comprehensive experimental design, varying coating thickness, direct normal irradiance (DNI) (A), dry bulb temperature (DBT) (B), and relative humidity (C) levels to analyze how different types of recovered biodegradable polymers interact with diverse environmental conditions. Optimization showed that better result was achieved at A = 8 W/m2, B = 40 °C and C = 70% for both the coated material studied. Comparative study showed that for enhanced cell efficiency and cost effectiveness, EcoPolyBlend coated material is more suited however for improving durability and reducing environmental impact NanoBioCelluSynth coated material is preferable choice. Results show that these materials offer promising improvements in PV cell performance and significantly lower environmental impact, providing a sustainable solution for renewable energy production. This research contributes to advancing both the utilization of biomass waste and the development of eco-friendly PV cell technologies, with implications for a more sustainable and greener energy future. This study underscores the pivotal role of exploring anaerobic digestate-derived polymers in advancing the sustainability and performance of solar photovoltaic cells, addressing critical environmental and energy challenges of our time.Please confirm if the author names are presented accurately and in the correct sequence (given name, middle name/initial, family name). Author 7 Given name: [Ashok] Last name [Kumar Yadav]. Also, kindly confirm the details in the metadata are correct.correct [ABSTRACT FROM AUTHOR]

Investigating biodegradable and biocompatible materials for electronic applications can lead to tangible outcomes such as developing green-electronic devices and reducing the amount of e-waste. The proposed emulsion-based conducting ink formulation takes into consideration circular economy and green principles throughout the entire process, from the selection of materials to the production process. The ink is formulated using the biopolymer polylactic acid dissolved in a sustainable solvent mixed with water, along with conductive carbon nanotubes (CNTs) and silver flakes as fillers. Hybrid conductive fillers can lower the percolation threshold of the ink and the production costs, while maintaining excellent electrical properties. The coating formed after the deposition of the ink, undergoes isothermal treatment at different temperatures and durations to improve its adhesion and electrical properties. The coating's performance was evaluated by creating an eight-finger interdigitated sensor using a Voltera PCB printer. The sensor demonstrates exceptional performance when exposed to various loading and unloading pressures within the 0.2–500.0 kPa range. The results show a consistent correlation between the change in electrical resistance and the stress caused by the applied load. The ink is biodegradable in marine environments, which helps avoiding its accumulation in the ecosystem over time. [ABSTRACT FROM AUTHOR]

We introduce a novel lead-free ferroelectric thin film (1-x)BaTiO3-xBa(Cu1/3Nb2/3)O3 (x = 0.025) (BT-BCN) integrated on to HfO2 buffered Si for non-volatile memory (NVM) applications. Piezoelectric force microscopy (PFM), x-ray diffraction, and high resolution transmission electron microscopy were employed to establish the ferroelectricity in BT-BCN thin films. PFM study reveals that the domains reversal occurs with 180° phase change by applying external voltage, demonstrating its effectiveness for NVM device applications. X-ray photoelectron microscopy was used to investigate the band alignments between atomic layer deposited HfO2 and pulsed laser deposited BT-BCN films. Programming and erasing operations were explained on the basis of band-alignments. The structure offers large memory window, low leakage current, and high and low capacitance values that were easily distinguishable even after ~106 s, indicating strong charge storage potential. This study explains a new approach towards the realization of ferroelectric based memory devices integrated on Si platform and also opens up a new possibility to embed the system within current complementary metal-oxide-semiconductor processing technology. [ABSTRACT FROM AUTHOR]