Search

In this work, Eucommia ulmoides leaf extract (EUOLstabilized silver nanoparticles (EUOL@AgNPs) incorporated sulfonated polyether sulfone (SPES)/polyethersulfone (PES) electrospun nanofiber membranes (SP ENMs) were prepared by electrospinning, and they were studied for the removal of lead (Pb(II)) and cadmium (Cd(II)) ions from aqueous solutions. The SP ENMs with various EUOL@AgNPs loadings were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscope, thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and contact angle (CA) measurements. The adsorption studies showed that the adsorption of Cd(II) and Pb(II) was rapid, achieved equilibrium within 40 min and 60 min, respectively and fitted with non-linear pseudo-second-order (PSO) kinetics model. For Cd(II) and Pb(II), the Freundlich model described the adsorption isotherm better than the Langmuir isotherm model. The maximum adsorption capacity for Cd(II) and Pb(II) was 625 and 370.37 mg g−1 respectively at neutral pH. Coexisting anions of fluoride, chloride, and nitrate had a negligible influence on Cd(II) removal than the Pb(II). On the other hand, the presence of silicate and phosphate considerably affected Cd(II) and Pb(II) adsorption. The recyclability, regeneration, and reusability of the fabricated EUOL@AgNPs-SP ENMs were studied and they retained their high adsorption capacity up to five cycles. The DFT measurements revealed that SP-5 ENMs exhibited the highest adsorption selectivity for Cd(II) and the measured binding energies for Cd(II), Pb(II), are 219.35 and 206.26 kcal mol−1, respectively. The developed ENM adsorbent may find application for the removal of heavy metals from water. [ABSTRACT FROM AUTHOR]

Legumin A is a seed storage protein that provides nutrients for seed germination. The purpose of this study was to describe the structure and expression pattern of the EuLEGA gene in Eucommia ulmoides Oliver (E. ulmoides) and to infer its functional role. The 1287 bp coding sequence of the EuLEGA CDS of the EuLEGA gene, encoding a protein containing 428 amino acid residues, was cloned. The structure predicted that the protein belonged to the RmlC (deoxythymidine diphosphates, dTDP)-4-dehydrorhamnose 3,5-epimerase)-like cupin conserved domain family, which contains both RmlC, a key enzyme for the synthesis of rhamnose and legumin A. The overexpression (OE) vector of the EuLEGA gene was constructed and genetically transformed into tobacco and E. ulmoides; the RNA interference (RNAi) vector of the EuLEGA gene was constructed and genetically transformed into E. ulmoides; and the contents of legumin A and rhamnose were detected. The results showed that the EuLEGA gene could significantly increase the content of legumin A in transgenic tobacco leaves and transgenic E. ulmoides regenerative buds, and the OE of this gene in E. ulmoides could promote an increase in rhamnose content. RNAi caused a significant decrease in the legumin A content in the regenerated buds of E. ulmoides. These was a significant increase in legumin A in the transgenic tobacco seeds, and these results indicate that the expression of the EuLEGA gene is closely related to the accumulation of legumin A. Subcellular localization studies revealed that EuLEGA is localized to the cytoplasm with the vacuolar membrane. Analysis of the EuLEGA gene expression data revealed that the expression level of the EuLEGA gene in the samaras was significantly greater than that in the leaves and stems. In addition, the study also demonstrated that GA3 can upregulate the expression levels of the EuLEGA gene, while ABA and MeJA can downregulate its expression levels. [ABSTRACT FROM AUTHOR]

Abstract In this work, Eucommia ulmoides leaf extract (EUOLstabilized silver nanoparticles (EUOL@AgNPs) incorporated sulfonated polyether sulfone (SPES)/polyethersulfone (PES) electrospun nanofiber membranes (SP ENMs) were prepared by electrospinning, and they were studied for the removal of lead (Pb(II)) and cadmium (Cd(II)) ions from aqueous solutions. The SP ENMs with various EUOL@AgNPs loadings were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscope, thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and contact angle (CA) measurements. The adsorption studies showed that the adsorption of Cd(II) and Pb(II) was rapid, achieved equilibrium within 40 min and 60 min, respectively and fitted with non-linear pseudo-second-order (PSO) kinetics model. For Cd(II) and Pb(II), the Freundlich model described the adsorption isotherm better than the Langmuir isotherm model. The maximum adsorption capacity for Cd(II) and Pb(II) was 625 and 370.37 mg g−1 respectively at neutral pH. Coexisting anions of fluoride, chloride, and nitrate had a negligible influence on Cd(II) removal than the Pb(II). On the other hand, the presence of silicate and phosphate considerably affected Cd(II) and Pb(II) adsorption. The recyclability, regeneration, and reusability of the fabricated EUOL@AgNPs-SP ENMs were studied and they retained their high adsorption capacity up to five cycles. The DFT measurements revealed that SP-5 ENMs exhibited the highest adsorption selectivity for Cd(II) and the measured binding energies for Cd(II), Pb(II), are 219.35 and 206.26 kcal mol−1, respectively. The developed ENM adsorbent may find application for the removal of heavy metals from water.