Search

In addition to human activities, this study found that topography is also an important factor affecting land surface temperature (LST). In this paper, based on Landsat 8 OLI/TIRS remote sensing images, a radiative transfer model was adopted to retrieve the LST, and a maximum likelihood method was used to remove artificial environmental interference factors, such as water bodies and built-up lands. This paper aims to analyze the influence of topographic factors, such as elevation, slope, aspect and shaded relief, on the LST of Hangzhou. By means of a statistical analysis, we obtained the quantitative relationship between these factors and constructed a multiple linear regression model of terrain factors and LST. The research revealed the following findings: (1) in the study area, elevation and slope are negatively correlated with LST, and all the factors have linear relationships with LST. (2) The relationship between aspect and LST is not significant, and high values of LST are found on the southern, southeastern and southwestern slopes; the lowest values are found on the northern slopes. (3) There is a significant linear relationship between the values of the shaded relief map and LST, and the more shadows there are, the lower the LST value will be. (4) After comprehensive analysis of the influence of the abovementioned topographic factors on the LST, it is found that shaded relief has the greatest contribution and is positively correlated with LST. The influence of shaded relief on surface thermal environment should be paid more attention in the process of surface thermal environment work. The assessment of the influence degree of shaded relief and surface thermal environment should be the premise and basis for many other studies.

This paper presents the design, simulation and low-cost fabrication of microfluidic channel for biomedical application. Channel is fabricated using soft lithography technique. Printed Circuit Board (PCB) is used to make the master for the channel. Channel pattern is transferred on PCB plate using toner transfer technique followed by ferric chloride etching. Paper also discusses, the issues involved in PCB based master fabrication and their viable solutions. Glass is used as substrate material and the channel is made of Sylgard 184 Polydimethylsiloxane (PDMS). Channel is interfaced with a syringe pump to observe the fluid flow. To predict the behavior of the channel, FEM simulation is performed using COMSOL Multiphysics 5.2a. There is a good match between the theoretical, simulation and test results. Finally, to test the biocompatibility of the channel, genomic DNA is passed through the channel and gel electrophoresis analysis is performed.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Both the Osteopathic Research Innovation Network (ORION) and the Osteopathy Research Connect-New Zealand (ORC-NZ) are practice-based research networks (PBRNs) recently established in Australia and New Zealand. This paper highlights the profile of the osteopaths participating in each PBRN in order to encourage and facilitate further related research in osteopathy. All registered osteopaths in Australia and New Zealand were invited to participate in the ORION and ORC-NZ PBRNs, respectively. This paper presents practice and sociodemographic characteristics of the osteopaths that elected to join the PBRN in their country. A total of 253 registered osteopaths in New Zealand (48.7%) agreed to join ORC-NZ while 992 registered osteopaths in Australia (44.5%) joined ORION. Membership of both PBRNs reflect national geographical spread, and diverse personal and practice characteristics. Combined membership of both PBRNs represents 45.3% of all registered osteopaths in Australasia and 7.7% of the global osteopathic profession. The PBRNs, independently and in combination, hold much potential to advance the evidence-base and capacity of osteopathy research. Both ORION and ORC-NZ PBRNs are powerful, innovative resources available to other interested parties to help conduct further osteopathy research in Australia and New Zealand.

International audience; A rapid Ultra performance Liquid chromatography coupled with Quadrupole/time of flight Mass Spectrometry (UpLc-Qtof-MS) method was designed to quickly acquire high-resolution mass spectra metabolomics fingerprints for rosé wines. An original statistical analysis involving ion ratios, discriminant analysis, and genetic algorithm (GA) was then applied to study the discrimination of rosé wines according to their origins. After noise reduction and ion peak alignments on the mass spectra, about 14 000 different signals were detected. The use of an in-house mass spectrometry database allowed us to assign 72 molecules. Then, a genetic algorithm was applied on two series of samples (learning and validation sets), each composed of 30 commercial wines from three different wine producing regions of France. Excellent results were obtained with only four diagnostic peaks and two ion ratios. This new approach could be applied to other aspects of wine production but also to other metabolomics studies. Wine is a widely consumed alcoholic beverage with a high commercial value. More specifically, the worldwide consumption of rosé wine has increased by 20% since 2002 1. Because of its high commercial value, it can become a subject of fraud, and authenticity control is required in order to maintain wine quality and to detect any adulteration 2. Thousands of molecules can be found in wines, including polyphenols 3. Recently, more than one hundred polyphenols have been quantified in various rosé wines 4. They are key components involved in color, taste and quality of wines. Their amount and composition depend on many different factors such as grape variety, geographic origin, winemaking, age. Several methods have already been developed for wine authentication purpose 5. They can be divided into two categories: metabolite profiling 6-8 or metabolomic fingerprinting 9,10. The first one is a targeted analysis focusing on a limited number of representative components while the second one is a non-targeted approach. Both methods were applied to red or white wines. In a previous work 11 , a very fast UPLC-QTOF-MS method was developed to characterize red wines from different grape varieties. One specific ion ratio was used to discriminate commercial red wines from three grape varieties. In this paper, we focused on the influence of the geographic origin of some rosé French wines. The chemical composition of grapes depends on the sum of different environmental conditions, which can be defined as a "terroir" that should influence the grape and wine composition. The goals of this paper were to develop: • A new and very fast UPLC-QTOF-MS wine metabolomics method with a focus on wine pigments. • An original statistical method and workflow that allow the robust discrimination of rosés wines according to their origins by using mass spectrometry ion ratio fingerprints. Results and Discussions UPLC-QTOF-MS analysis. First, a fast UPLC-QTOF-MS method was developed to rapidly acquire high-resolution mass spectra. In accordance with previous work and conclusions, we have used a short gradient instead of isocratic elution conditions or direct injections 11. It was shown that the last two methods gave limited results probably due to ionization suppression effect. In this work, we chose to work on the positive ionization

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Adiabatic quantum computation (AQC) is a promising counterpart of universal quantum computation, based on the key concept of quantum annealing (QA). QA is claimed to be at the basis of commercial quantum computers and benefits from the fact that the detrimental role of decoherence and dephasing seems to have poor impact on the annealing towards the ground state. While many papers show interesting optimization results with a sizable number of qubits, a clear evidence of a full quantum coherent behavior during the whole annealing procedure is still lacking. In this paper we show that quantum non-demolition (weak) measurements of Leggett Garg inequalities can be used to efficiently assess the quantumness of the QA procedure. Numerical simulations based on a weak coupling Lindblad approach are compared with classical Langevin simulations to support our statements., 7 pages, 3 figures. Includes supplementary material file

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

A macroarray immobilisation of fluorophores on filter papers for sensing metal ions by in-situ reductive amination and carbodiimide coupling is reported herein. Chemometric approaches resulted in a rapid discovery of sensors that can synergistically discriminate up to 12 metal ions with great prediction accuracies. Covalently bound on paper, sensoring scaffolds that were synthesised from the macroarray format can readily be adopted as practical paper-based sensors with great reusability and sensitivity, achieving the limit of detection at low nanomolar level with some repeating spotting. Lastly, the discovered scaffolds were also confirmed to be functional as unbound molecules, thus paving the way for more diverse applications.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Proliferation and migration of endothelial cells play an important role in many biological activities, and they can be regulated by various microenvironmental factors. In this paper, a novel microfluidic collective cell migration assay is developed to study endothelial cell migration and proliferation under combinations of three oxygen conditions: normoxia, oxygen gradient, and hypoxia and three medium compositions: normal growth medium, the medium with cytochalasin-D for actin polymerization inhibition, and with YC-1 for hypoxia-inducible factor (HIF) inhibition. The microfluidic device designed in the paper allows cell patterns formed with consistent dimensions using laminar flow patterning. In addition, stable oxygen gradients can be generated within the device by a spatially confined chemical reaction method. The device can be operated in conventional cell incubators with minimal chemical reagents and instrumentation for practical applications. The results show directional collective cell migration of the endothelial cells under the oxygen gradients for all the medium compositions. The directional behavior has never been discussed before, and indicates critical roles of oxygen gradients in guiding endothelial cell migration during various biological activities. The developed assay provides a practical yet powerful tool for further in vitro study of endothelial cell behaviors under various physiological microenvironments.

The development of economical, low-maintenance, environmentally friendly and effective water filtration techniques can have far-reaching public health, social and economic benefits. In this research, a cost-effective La-modified granular ceramic material made of red art clay and recycled paper fiber was developed for the removal of two major anionic contaminants, As(V) (arsenate) and Cr(VI) (chromate). La modification temperature significantly impacted the resulting composition and properties of the adsorbents, and thus played a crucial role in the adsorbent performance. The La-modified ceramic materials were extensively characterized through scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) surface area measurement, thermal gravimetric analysis (TGA), zeta potential measurements, and Fourier-transform infrared spectroscopy (FTIR) analysis. The characterization results suggested that surface coating by LaONO3-related compounds was critical for As(V) and Cr(VI) adsorption. At the modification temperature of 385 °C, the adsorption of As(V) and Cr(VI) reached maximum, which were 23 mg/g and 13 mg/g, respectively, under circumneutral conditions that are relevant to various aquatic systems. The adsorption kinetics and isotherm, the influence of pH, ionic strength and coexisting anions on As(V) and Cr(VI) adsorption were investigated to further understand both As(V) and Cr(VI) adsorption behavior. Findings from this research showed that La-modified ceramic material made of recycled paper waste represents a cost-effective adsorbent for anionic contaminant removal under environmentally relevant conditions.

The quadrature continuous-wave (QCW) radar has been extensively studied for small vibrational displacement detection such as non-contact sensing of human vital signals. One of the challenges of the QCW radar is the IQ-imbalance and DC-offset estimation by using curve fitting algorithms. Many algorithms have been proposed and have shown that the fitting error increases when the displacement length is small, in which case sufficient data is not provided to the algorithms. This paper presents a quadrature frequency-group (QFG) radar which utilizes a group of frequencies to enhance the fitting performance even with the small displacement. The grouped-frequencies in the QFG radar gives more data than the single-tone of the QCW radar under the same displacement condition. This paper presents the framework and properties of the QFG radar. Some fitting algorithms for the QFG radar are presented and the most adequate algorithm is suggested by simulation and experiments. Simulation and experimental results shows that the QFG radar outperforms the QCW radar. Specifically, it is shown that the fitting accuracy of the QFG radar is up to 100 times better than the QCW radar in the experiment.

This paper considers analysis of human brain networks or graphs constructed from time-series collected from functional magnetic resonance imaging (fMRI). In the network of time-series, the nodes describe the regions and the edge weights correspond to the absolute values of correlation coefficients of the time-series of the two nodes associated with the edges. The paper introduces a novel information-theoretic metric, referred as sub-graph entropy, to measure uncertainty associated with a sub-graph. Nodes and edges constitute two special cases of sub-graph structures. Node and edge entropies are used in this paper to rank regions and edges in a functional brain network. The paper analyzes task-fMRI data collected from 475 subjects in the Human Connectome Project (HCP) study for gambling and emotion tasks. The proposed approach is used to rank regions and edges associated with these tasks. The differential node (edge) entropy metric is defined as the difference of the node (edge) entropy corresponding to two different networks belonging to two different classes. Differential entropy of nodes and edges are used to rank top regions and edges associated with the two classes of data. Using top node and edge entropy features separately, two-class classifiers are designed using support vector machine (SVM) with radial basis function (RBF) kernel and leave-one-out method to classify time-series for emotion task vs. no-task, gambling task vs. no-task and emotion task vs. gambling task. Using node entropies, the SVM classifier achieves classification accuracies of 0.96, 0.97 and 0.98, respectively. Using edge entropies, the classifier achieves classification accuracies of 0.91, 0.96 and 0.94, respectively.

In this paper, a relation between the ultraviolet index (UVI) as a Sun exposure time and its effects in the form of burns according to the skin type has been elaborated. Moreover, we present a new expression that relates the intensity of solar radiation and the UVI, as well as expressions to obtain the percentage of population affected both by first and second degree lllsunburn for every skin-type. The results have been adjusted and validated through experimental results taken from the bibliography. Finally, this paper presents a table where the population can easily interpret the UVI values and calculate the maximum time one can be exposed to solar radiation without getting sunburn. In addition, this article aims to raise awareness of the potential harm caused by solar radiation by indicating the percentage of population affected by different types of sunburn depending on skin-type. Moreover, ultraviolet exposure to sunlight could not just result in sunburn, but also have long-term effects on eyes, or even cause immune system disorders or melanoma. Therefore, managing risk perception with this useful table could familiarize the population with actual harm prevention.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Blue emission giving nanoscale molecular clusters of Oleylamine–Acetone system was formed by an aging assisted hydrogen bond formation between the interacting molecular systems, at room temperature. The as-formed nanoscale molecular clusters were found to be self-assembled into flower-like aggregates and shifted the emission wavelength to red colour depicting an exciton delocalization in the aggregate system. Interestingly aging process has also produced imine type binding between Oleylamine and Acetone due to the condensation reaction. The experimental conditions and formation mechanism of hydrogen bond assisted Oleylamine–Acetone molecular aggregates and imine bond assisted Oleylamine–Acetone is elaborated in this paper in a systematic experimental approach with suitable theory. Finally we have introduced this Acetone assisted aging process in In2S3 QD system prepared with Oleylamine as functional molecules. It was found that the aging process has detached Oleylamine from QD surface and as a consequence In2S3 QD embedded Oleylamine–Acetone aggregates was obtained. When this In2S3 QD embedded molecular cluster system was used as an active layer in a photo conductor device then a maximum photo current value of the order of milli Ampere was obtained. The surfactant molecules normally inhibit the charge transport between QD systems and as a result it is always problematic to have the functional molecules in the QD based transport devices. Our approach has a solution to this problem and the present paper discusses the outcome of the results in detail.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.