Search

Lithium-doped anatase-TiO2 nanoparticles (LixTi1-xO2 NPs, x = 0, 0.05, 0.10, 0.15 and 0.20) could be synthesized by a simple sol–gel process. X-ray diffraction (XRD) results displayed the tetragonal (space group: I41/amd) of polycrystalline TiO2 anatase phase. The spectroscopy results of Raman and FT-IR confirmed the anatase phase of TiO2 through the specific modes of metal oxides vibration in the crystalline TiO2. Surfaces micrographs by scanning electron microscope (SEM) of agglomerated LixTi1-xO2 NPs showed a spongy like morphology. Transmission electron microscope (TEM) illustrated a cuboidal shape of dispersed NPs with particle size distributed in a narrow range 5–10 nm. Bruanauer Emmett-Teller (BET) results showed the increased surface area of LixTi1−xO2 NPs with increasing Li content. LixTi1-xO2 NPs (x = 0.05–0.20) working electrodes illustrated a pseudocapacitive behavior with excellent electrochemical properties through the whole cycles of GCD test. Interestingly, Li0.1Ti0.9O2 NPs electrode illustrated a high performance in terms of maximum specific capacitance 822 F g−1 at 1.5 A g−1 in 0.5 M Li2SO4 electrolyte, with excellent capacitive retention 92.6% after 5000 cycles GCD test. [ABSTRACT FROM AUTHOR]

This study focused on investigating the possibility of using different ratios (5, 10, 15 mass%) of recycled alum sludge (RAS) as partial replacement of ordinary Portland cement (OPC), to contribute to solving the problems encountered by cement production as well as stockpiling of large quantities of water-treated sludge waste. MnFe2O4 spinel nanoparticles (NMFs) were used to elaborate the mechanical characteristics and durability of different OPC-RAS blends. The outcomes of compressive strength, bulk density, water absorption, and stability against firing tests fastened the suitability of utilization of RAS waste for replacing OPC (maximum limit 10%). The inclusion of different doses of NMFs nanoparticles (0.5, 1 and 2 mass %) within OPC–RAS pastes, motivates the configuration of hardened nanocomposites with improved physico-mechanical characteristics and stability against firing. Composite made from 90% OPC–10% RAS–0.5% NMFs presented the best characteristics and consider the optimal choice for general construction applications. Thermogravimetric analysis (TGA/DTG), X-ray diffraction analysis (XRD), and scanning electron microscope (SEM) techniques. affirmed the positive impact of NMFs particles, as they demonstrated the formation of enormous phases as ilvaite (CFSH), calcium silicate hydrates (CSHs), MnCSH, Nchwaningite [Mn2 SiO3(OH)2 H2O], [(Mn, Ca) Mn4O9⋅3H2O], calcium aluminosilicate hydrates (CASH), Glaucochroite [(Ca, Mn)2SiO4, and calcium ferrite hydrate (CFH). These hydrates boosted the robustness and degradation resistance of the hardened nanocomposites upon firing. [ABSTRACT FROM AUTHOR]

Zn-doped CuFe2O4 nanoparticles (NPs) were eco-friendly synthesized using plant extract. These nanoparticles were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy and thermal gravimetric analysis (TGA). SEM image showed spherical NPs with size range less than 30 nm. In the EDS diagram, the elements of zinc, copper, iron, and oxygen are shown. The cytotoxicity and anticancer properties of Zn-doped CuFe2O4 NPs were evaluated on macrophage normal cells and A549 lung cancer cells. The cytotoxic effects of Zn-doped CuFe2O4 and CuFe2O4 NPs on A549 cancer cell lines were analyzed. The Zn-doped CuFe2O4 and CuFe2O4 NPs demonstrated IC50 values 95.8 and 278.4 µg/mL on A549 cancer cell, respectively. Additionally, Zn-doped CuFe2O4 and CuFe2O4 NPs had IC80 values of 8.31 and 16.1 µg/mL on A549 cancer cell, respectively. Notably, doping Zn on CuFe2O4 NPs displayed better cytotoxic effects on A549 cancer cells compared with the CuFe2O4 NPs alone. Also spinel nanocrystals of Zn-doped CuFe2O4 (~ 13 nm) had a minimum toxicity (CC50 = 136.6 µg/mL) on macrophages J774 Cell Line. [ABSTRACT FROM AUTHOR]

Nano-lubricants offer improved tribological properties in many applications, such as machines and engines. The presence of nanoparticles in the lubricating oil affects its wear, friction, thermal, chemical and physical properties in many ways. Titanium dioxide (TiO2) is a promising lubricant additive for enhanced engine efficiency. This article reports the effect of 10 W-30 pure base engine oil suspended TiO2 nanoparticles. Four different volume concentrations (0.01%, 0.025%, 0.050% and 0.075%) of TiO2 nanoparticles in the base lubricating oil are used for the analysis. The tribological tests were performed at ambient temperature as well as at 75 °C using a four ball tribometer. Scanning electron microscope (SEM) and Alicona Inginite Focus G5 microscope were used to analyze the worn surface. The results show that the surface-modified TiO2 nanoparticles can remarkably improve the load-carrying capacity, the friction reducing, and anti-wear abilities of the additive oil. The diameter of the wear trace and the coefficient of friction are the tribological properties analyzed for the nano-lubricant prepared at different volume concentration (VC). It was found that the diameter of the wear scar and the coefficient of friction increase with increasing VC of TiO2 nanoparticles in the lubricating oil. The main objective of the paper is to present the recent progress and, consequently, to develop a comprehensive understanding of the tribological behavior of engine oil mixed with TiO2 nanoparticles. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the efficacy of magnetic nanocomposite of cefotax against MRSA. A total of 190 samples were collected from milk, farm personnel and different environmental components from the dairy farm under the study to isolate S. aureus. Cefotax based magnetic nanoparticles was synthetized by the adsorption method and marked using Fourier-transform infrared spectrum (FT-IR), and X-ray diffraction (XRD), then it was characterized using Scanning and Transmission Electron Microscope (SEM and TEM). The obtained results revealed that number of positive samples of S. aureus isolation were 63 (33.1%), mainly from feed manger followed by milk machine swabs (60.0 and 53.3%, respectively) at X2 = 48.83 and P < 0.001. Obtained isolates were identified biochemically and by using molecular assays (PCR), also mec A gene responsible for resistance to cefotax was detected. Testing the sensitivity of 63 isolates of S. aureus showed variable degree of resistance to different tested antibiotics and significant sensitivity to cefotax based magnetic nanoparticles at P < 0.05. It was concluded that dairy environment might act a potential source for transmission of MRSA between human and animal populations. In addition, cefotax based magnetic nanoparticles verified an extreme antimicrobial efficacy against MRSA. [ABSTRACT FROM AUTHOR]

Green synthesis of zinc oxide nanoparticles (ZnO NPs) through simple, rapid, eco-friendly and an economical method with a new haloalkaliphilic bacterial strain (Alkalibacillus sp. W7) was investigated. Response surface methodology (RSM) based on Box-Behnken design (BP) was used to optimize the process parameters (ZnSO4.7H2O concentration, temperature, and pH) affecting the size of Alkalibacillus-ZnO NPs (Alk-ZnO NPs). The synthesized nanoparticles were characterized using UV–visible spectrum, X-ray diffraction (XRD), Scanning electron microscope-energy dispersive X-ray spectroscopy (SEM–EDX), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and Zeta potential. The UV–Vis spectrum of ZnO NPs revealed a characteristic surface plasmon resonance (SPR) peak at 310 nm. XRD pattern confirmed the hexagonal wurtzite structure of highly pure with a crystallite size 19.5 nm. TEM proved the quasi-spherical shape nanoparticles of size ranging from 1 to 30 nm. SEM–EDX showed spherical shaped and displayed a maximum elemental distribution of zinc and oxygen. FTIR provided an evidence that the biofunctional groups of metabolites in Alkalibacillus sp.W7 supernatant acted as viable reducing, capping and stabilizing agents. [ABSTRACT FROM AUTHOR]

Epoxy-based adhesives are widely used for repairing or jointing the metal sheets in the industry. Because of their superior mechanical properties, the metallic nanoparticles can be selected as the additive of the epoxy adhesive. The strength of the Cu nanoparticles (CuNPs) can be expected to improve the mechanical properties of neat epoxy. In this study, CuNPs were added at various weight ratios, such as 1, 2, 5, 10, 15, and 20% into the epoxy resin adhesive. Tensile tests of the dog-bone specimens and the lap-shear tensile tests of the single lap joints were performed for obtaining the mechanical properties. In order to investigate the failure mechanisms, the fractured surfaces of the tensile test samples and adhesively joined sheets were imaged by using a Scanning Electron Microscope. The thermal properties of the adhesives were obtained by using Thermo Gravimetric Analysis and Differential Thermal Analysis. The mechanical and thermal properties of epoxy resin adhesive were improved by adding the CuNPs. The best adding ratios of CuNPs into epoxy were obtained by both mechanical and thermally point of views. As a result of this study, 15 wt% the ratio of Cu nanoparticle adding into the epoxy-based adhesive is suitable for improving the mechanical properties. On the other hand, 20% is the proper Cu nanoparticle adding ratio for the thermal properties improving. [ABSTRACT FROM AUTHOR]

A simple microplasma method was used to synthesize cuprous oxide (Cu2O) nanoparticles in NaCl-NaOH-NaNO3 electrolytic system. Microplasma was successfully used as the cathode and copper plate was used as the anode. The Cu2O products are characterized by X-ray powder diffraction (XRD), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The results show that the morphology of Cu2O nanocrystals obtained by this technology is mainly dependent on the electrolytic media, stirring, current density and reaction temperature. The uniform and monodisperse sphere Cu2O nanoparticles with the size about 400 ~ 600 nm can be easily obtained in H2O–ethylene glycol mix-solvent (volume ratio 151) and appropriate current density with stirring at room temperature. In addition, the possible mechanism has been reported in the article. And the average energy consumed in producing 1 g Cu2O nanoparticles is 180 kJ. For the flexibility and effectiveness of this microplasma technology, it will have broad application prospects in the realm of nanoscience, energy and environment. [ABSTRACT FROM AUTHOR]