Search

Abstract Anger suppression is important in our daily life, as its failure can sometimes lead to the breaking down of relationships in families. Thus, effective strategies to suppress or neutralise anger have been examined. This study shows that physical disposal of a piece of paper containing one’s written thoughts on the cause of a provocative event neutralises anger, while holding the paper did not. In this study, participants wrote brief opinions about social problems and received a handwritten, insulting comment consisting of low evaluations about their composition from a confederate. Then, the participants wrote the cause and their thoughts about the provocative event. Half of the participants (disposal group) disposed of the paper in the trash can (Experiment 1) or in the shredder (Experiment 2), while the other half (retention group) kept it in a file on the desk. All the participants showed an increased subjective rating of anger after receiving the insulting feedback. However, the subjective anger for the disposal group decreased as low as the baseline period, while that of the retention group was still higher than that in the baseline period in both experiments. We propose this method as a powerful and simple way to eliminate anger.

Abstract Oil-immersed transformers are expensive equipment in the electrical system, and their failure would lead to widespread blackouts and catastrophic economic losses. In this work, an elaborate diagnostic approach is proposed to evaluate twenty-six different transformers in-service to determine their operative status as per the IEC 60599:2022 standard and CIGRE brochure. The approach integrates dissolved gas analysis (DGA), transformer oil integrity analysis, visual inspections, and two Back Propagation Neural Network (BPNN) algorithms to predict the loss of life (LOL) of the transformers through condition monitoring of the cellulose paper. The first BPNN algorithm proposed is based on forecasting the degree of polymerization (DP) using 2-Furaldehyde (2FAL) concentration measured from oil samples using DGA, and the second BPNN algorithm proposed is based on forecasting transformer LOL using the 2FAL and DP data obtained from the first BPNN algorithm. The first algorithm produced a correlation coefficient of 0.970 when the DP was predicted using the 2FAL measured in oil and the second algorithm produced a correlation coefficient of 0.999 when the LOL was predicted using the 2FAL and DP output data obtained from the first algorithm. The results show that the BPNN can be utilized to forecast the DP and LOL of transformers in-service. Lastly, the results are used for hazard analysis and lifespan prediction based on the health index (HI) for each transformer to predict the expected years of service.

Abstract This article presents the results of an experiment designed to study the impact of temperature on the characteristic parameters of creeping discharges. The insulating interfaces consist of a thermally enhanced cellulose surface immersed in mineral oil, palm kernel oil methyl ester (PKOME) and castor oil methyl ester (COME). The study was carried out under a standard negative lightning impulse voltage (1.2/50 μs). The article also presents the complete algorithms for calculating the maximum extension of the discharges, the ionisation rate and the charge produced by them. The results of the study show that temperature favors the propagation of discharges and the ionisation rate. It was observed that liquids with a higher dielectric constant and high electrical conductivity were more exposed to the impact of temperature. The results show ionisation increments of 0.973%/°C, 1.093%/°C and 1.076%/°C in mineral oil (MO), COME and PKOME respectively. The maximum extension of the discharges shows a linear evolution with the applied voltage and temperature but a non-linear increment with the temperature. As for the charge produced, it shows a constant increment with temperature and voltage in each liquid. These values are (5.839%/°C, 1.977%/kV), (6.047%/°C, 2.082%/kV) and (6.177%/°C, 2.113%/kV) respectively in MO, COME and PKOME.

Abstract Energy storage devices (ESD) which are intended to power electronic devices, used in close contact of human skin, are desirable to be safe and non-toxic. In light of this requirement, Zn based energy storage devices seem to provide a viable pathway as they mostly employ aqueous based electrolytes which are safe and non-toxic in their functioning. Additionally, having a flexible ESD will play a crucial role as it will enable the ESD to conform to the varying shapes and sizes of wearable electronics which they energize. In this work, we have developed an inkjet-printed Zinc ion battery (IPZIB) with planar electrode configuration over bond paper substrate. Zn has been used as the negative electrode, MnO2 is used as the positive electrode with Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the active binder. Conducting tracks of reduced graphene oxide (rGO) are used to construct the current collector on the paper substrate. The fabricated IPZIB delivered a high discharge capacity of 300.14 mAh g−1 at a current density of 200 mA g−1. The energy density of the IPZIB is observed as 330.15 Wh kg−1 at a power density of 220 W kg−1 and retains an energy density of 94.36 Wh kg−1 at a high power density of 1650 W kg−1. Finally, we have demonstrated the capability of the IPZIB to power a LED at various bending and folding conditions which indicates its potential to be used in the next generation flexible and wearable electronic devices.

Abstract As the social organism, Polistes wasps build a communal nest using woody fibers with saliva for sustaining brood and adult population throughout the season. Limited information exists regarding the identification specific plant materials employed in wasp nest building. Thus, we firstly tested if the DNA metabarcoding approach utilizing rbcL and trnL molecular markers could identify the plant species quantitatively and qualitatively inform the mixed-origin woody samples. A threshold of 0.01 proportion of reads was applied for rbcL and trnL molecular markers, while this threshold for median proportion was 0.0025. In assessing taxa richness, the median proportion demonstrated superior performance, exhibiting higher taxa detection power, however, rbcL marker outperformed in quantitative analysis. Subsequently, we applied DNA metabarcoding to identify the plant materials from the nests of two Polistes species, P. mandarinus and P. rothneyi. The results showed that higher preference of Quercus and Robinia as the major nest building materials regardless of the surrounding plant communities, by two wasp species. Material diversity was higher for P. rothneyi than P. mandarinus, which may explain the abundance of this species possibly with heightened adaptive capacities in their nesting behavior. This study demonstrated that DNA metabarcoding could identify the complex nest-building plant materials of paper wasps and provide insights into their ecological interactions in the natural ecosystem.

Abstract In mountain areas landslides many times endanger safety of transport infrastructures, and these must be stabilized with retaining wall structures. In this paper the validation of a new composite as a backfill material for landslide stabilization with a large scale demo retaining wall is presented. The new composite was made from residues of paper industry, which uses for its production deinking process. New composite was validated with the laboratory tests, construction of small demo sites and at the end with a large demo retaining wall structure with a length of 50 m. It was concluded that the paper sludge ash and the paper sludge are in proportion 70:30, compacted on the optimal water content and maximum dry density, reached sufficient uniaxial compressive and shear strength. However, the composite's hydration processes required the definition of an optimal time between the composite mixing and installation. In 2019, the retaining wall structure from the new composite was successfully built. The large demo structure is an example of the knowledge transfer from the laboratory to the construction site, in which composite and installing technology could be verified.

In the realm of robotics and automation, robot teleoperation, which facilitates human-machine interaction in distant or hazardous settings, has surged in significance. A persistent issue in this domain is the delays between command issuance and action execution, causing negative repercussions on operator situational awareness, performance, and cognitive load. These delays, particularly in long-distance operations, are difficult to mitigate even with the most advanced computing advancements. Current solutions mainly revolve around machine-based adjustments to combat these delays. However, a notable lacuna remains in harnessing human perceptions for an enhanced subjective teleoperation experience. This paper introduces a novel approach of sensory manipulation for induced human adaptation in delayed teleoperation. Drawing from motor learning and rehabilitation principles, it is posited that strategic sensory manipulation, via altered sensory stimuli, can mitigate the subjective feeling of these delays. The focus is not on introducing new skills or adapting to novel conditions; rather, it leverages prior motor coordination experience in the context of delays. The objective is to reduce the need for extensive training or sophisticated automation designs. A human-centered experiment involving 41 participants was conducted to examine the effects of modified haptic cues in teleoperations with delays. These cues were generated from high-fidelity physics engines using parameters from robot-end sensors or physics engine simulations. The results underscored several benefits, notably the considerable reduction in task time and enhanced user perceptions about visual delays. Real-time haptic feedback, or the anchoring method, emerged as a significant contributor to these benefits, showcasing reduced cognitive load, bolstered self-confidence, and minimized frustration. Beyond the prevalent methods of automation design and training, this research underscores induced human adaptation as a pivotal avenue in robot teleoperation. It seeks to enhance teleoperation efficacy through rapid human adaptation, offering insights beyond just optimizing robotic systems for delay compensations., (© 2024. The Author(s).)

The pharmaceutical industry is an important industry for the national economy and the people's livelihood, which is not only beneficial to the people's livelihood, but also has huge commercial value. How to promote the development of Chinese pharmaceutical industry is an urgent problem to be solved. In this study, 47 listed pharmaceutical companies are taken as cases, and Qualitative Comparative Analysis of Fuzzy Sets (fsQCA) is used to analyze the influence of five antecedent conditions on the total factor productivity of pharmaceutical enterprises from the perspective of corporate governance, and to explore the composition to Total Factor Productivity (TFP) improvement. The results are as follows. First, single corporate governance factor does not constitute the necessary condition to improve the TFP of pharmaceutical enterprises. Second, there are three configurations of high TFP of pharmaceutical enterprises, among these, two configurations belong to regulatory constraints type and one configuration belongs to the active board type. There is only one configurations to low TFP of pharmaceutical enterprises: the passive board. Based on the perspective of configuration, this paper discusses how corporate governance drives TFP improvement in pharmaceutical enterprises, which can provide systematic thinking and practical guidance for each company to promote its TFP improvement according to its own corporate structure., (© 2024. The Author(s).)

Healthcare systems worldwide are grappling with the challenge of providing high-quality healthcare in the face of evolving disease patterns. India, like many other countries, faces a significant treatment gap for various curable impairments, non-communicable diseases (NCDs), and cardiovascular diseases (CVDs). To address their healthcare needs, individuals often relocate in search of better treatment options. However, no studies were conducted to understand the spatial mobility. This paper explores the determinants of spatial mobility for treatment in India using data from NSS 75th round (2017-2018). A total of 64,779 individual medical cases of different diseases were taken into consideration for our analysis. Fixed effect and multinomial regression models were used to understand diseases specific mobility for treatment. It was found that those with CVDs, NCDs, and disabilities are more prone to travel outside their district for medical care. Rural and economically disadvantaged individuals also tend to travel further for treatment. The key factors impacting treatment-seeking mobility include insurance coverage, hospital quality, cost of medicine, and cost of X-rays/surgeries. The study highlights the need for improved policies to address the gap between healthcare needs and infrastructure in India, with a focus on prioritizing the development of local healthcare facilities for disabilities, NCDs, and CVDs., (© 2024. The Author(s).)

Abstract The deep integration of digital technology and the real economy not only affects the production and operation mode of enterprises, but also becomes the promoter of service-oriented transformation and the driving force of sustainable development. Based on the text analysis method, this paper uses the data of Chinese listed manufacturing enterprises from 2011 to 2020 to study the impact of digital technology application on the service-oriented transformation and sustainable development of enterprises. It is found that digital technology application significantly improves the environmental performance and economic performance of enterprises by driving their service-oriented transformation and technological innovation, and then enhances their sustainable development. The improvement effect of digital technology application on the sustainable development of resource-based enterprises and capital-intensive enterprises is more significant. The conclusion in this paper provides micro-evidence for understanding the role of digital technology in addressing environmental issues and sustainable development.