Search

To study the effects of gas hydrates on the prevention and control of coal and gas protrusions, this paper reports the results of acoustic emission experiments on coal bodies containing gas hydrates with different saturation levels. The results showed that few acoustic emission events were generated in the elasticity stages of coal bodies containing gas hydrates, and the first sudden increase in the number of ringing counts generally occurred before and after the yielding point. Additionally, the acoustic emission events in the yielding stage were more active, and the cumulative number of ringing counts increased faster. The peak ringing counts appeared around the damage point, and a small number of acoustic emission events were still generated after destruction of the coal samples. The cumulative ringing counts decreased linearly with increasing saturation. The effect of saturation on the cumulative ringing counts in the elasticity stage of the gas hydrate-containing coal samples was small, but the difference between the cumulative ringing counts in the yielding stage and those in the destruction stage was larger. The total cumulative ringing counts and the cumulative ringing counts during each stage for the gas hydrate-containing coal samples decreased with increasing enclosure pressure. The energy and amplitude of the loading process were consistent with the trend for the ringing counts. The acoustic emission ringing counts of gas-containing coals were greater than those of gas hydrate-containing coals in the yielding and destructing stages. [ABSTRACT FROM AUTHOR]

Magma intrusion has an important influence on the physical and mechanical properties of coal and rock. In the area of magma intrusion, disasters such as gas outburst are prone to occur. Revealing its invasion law will be conducive to disaster management and energy development. For this purpose, changes in industrial analysis components of coal, mineral composition, major oxides, trace elements, and rare earth elements of coal under the thermal metamorphism of magma intrusion were analyzed. It is found that the moisture and volatile matter contents of the thermally affected coals in the mining face are generally lower than that of normal coals, while moisture and volatile matter contents are reduced towards to the magma intrusion contact. For example, the moisture and volatile matter of coal sample M01 decreased by 64.6% and 38.6% respectively compared with coal sample M05. During magma intrusion, some minerals remain on the surface of the coal body, resulting in changes in the mineral composition of the coal body. The decrease in carbon atom net spacing, the increase in crystallite aggregation and ductility, and aromaticity in thermally affected coals have a positive impact on the improvement of coal metamorphism. Due to the influences of magmatic intrusion, the variation rules of major oxides in coal are different, and the closer to the magmatic intrusion zone, the easier the major oxides are to be depleted. However, magma intrusion will not lead to the loss of all major oxides in thermally affected coals, such as content of CaO is 54.8%, which is higher than that of coal not affected by magmatic hydrothermal fluid. Most of the trace elements in the thermally affected coals of the No. 9 coal seam are depleted. The contents of rare earth elements are low on the whole coalbasis, with an average of 29.48 μg/g, and the distribution pattern towards to magmatic intrusion shows a wide and gentle "V" curve with left high and right low, showing the characteristics of enrichment of light rare earth elements. [ABSTRACT FROM AUTHOR]

The finite difference model and particle flow model were constructed to reproduce the process of coal and gas outburst in front of the tunnel. The reliability of the particle flow model was verified by studying the internal stress, gas pressure, and related parameters of gas and coal two-phase flow. Then the process of coal and gas outburst is described from a microscopic perspective. The results show that the particle flow numerical model of coal and gas outburst is in line with reality and can intuitively and conveniently monitor relevant parameters; The concentrated stress caused by excavation of tunnels can reach 1.2 times the in-situ stress; High stress causes the adhesion between coal particles to break down, which is the main reason for the initiation of coal and gas outbursts; The intermittent breakthrough of gas on the coal particle collection that blocks the release channel has caused pulsating characteristics of coal and gas outbursts. [ABSTRACT FROM AUTHOR]