Search

Abstract The supercritical antisolvent (SAS) process was a green alternative to improve the low bioavailability of insoluble drugs. However, it is difficult for SAS process to industrialize with limited production capacity. A coaxial annular nozzle was used to prepare the microcapsules of aprepitant (APR) and polyvinylpyrrolidone (PVP) by SAS with N, N-Dimethylformamide (DMF) as solvent. Meanwhile, the effects of polymer/drug ratio, operating pressure, operating temperature and overall concentration on particles morphology, mean particle diameter and size distribution were analyzed. Microcapsules with mean diameters ranging from 2.04 μm and 9.84 μm were successfully produced. The morphology, particle size, thermal behavior, crystallinity, drug content, drug dissolution and residual amount of DMF of samples were analyzed. The results revealed that the APR drug dissolution of the microcapsules by SAS process was faster than the unprocessed APR. Furthermore, the drug powder collected every hour is in the kilogram level, verifying the possibility to scale up the production of pharmaceuticals employing the SAS process from an industrial point of view.

The realization of coupling coordination between digitalization and traditional industrial upgrading in the Yellow River Basin holds significant practical value for promoting high-quality industrial development in the region. In order to assess this coupling coordination, we utilized inter-provincial panel data from nine provinces in the Yellow River Basin, covering the period from 2011 to 2020. Through the application of a coupling coordination degree model, we calculated the degree of coupling coordination and relative development between digitalization and traditional industrial upgrading. Additionally, we conducted a spatial–temporal analysis to identify the characteristics and trends of digitalization and traditional industrial upgrading. Furthermore, we constructed a panel VAR model to examine the interactive relationship between these two factors. The findings are as follows: (1) overall, over the study period, the degree of coupling coordination between digitalization and traditional industrial upgrading in the Yellow River Basin transitioned from a disordered state to a run-in stage. The corresponding development type changed from a low steady state to a co-existence of low and medium steady states. Notably, the levels of digitalization, traditional industrial upgrading, and coupling coordination all exhibited a gradual increase, while the relative development degree declined. (2) The coupling coordination degree between digitalization and traditional industrial upgrading in the Yellow River Basin demonstrated significant regional variation. Provinces displaying a "high–high" agglomeration distribution and "low–low" agglomeration distribution were concentrated in the middle and lower reaches, as well as the upper reaches, of the Yellow River. Furthermore, there was a positive spatial autocorrelation between these regions. (3) Both digitalization and traditional industrial upgrading exhibit self-reinforcing mechanisms, and a long-term dynamic correlation exists between them. [ABSTRACT FROM AUTHOR]

The ICT service industry has become a burgeoning industry at a high and stable speed. Their equitable distribution can improve national and global positive peace. This paper aimed to verify the characteristics of spatio-temporal evolution and its influencing factors in the ICT service industry. Based on the data from 31 Provinces in China from 2015 to 2019, this paper uses location quotient, spatial autocorrelation methods and spatial econometric analysis to explore the development characteristics, evolution and influencing factors of the ICT service industry, respectively. The main results are shown as follows: (1) China's ICT service industry is mainly concentrated in Beijing, Shanghai, Zhejiang, Tibet, and Guangdong, with a trend of specialisation development. They are not only distributed in cities with relatively superior overall development but also those with superior industrial and development carrier elements. Technological relevance, aggregation, and political difference might have an impact on promoting the emergence and development of these industries. (2) ICT service industry is characterised by stable and highly concentrated development. Numbers between three to five significant provinces and types with high-high (HH) and high-low (HL) clusters of local spatio-temporal association kept stable in the period. The HH was in eastern coastal areas, including Zhejiang, Shanghai, Jiangsu, and Shandong, and the HL was in Guangdong in 2015. There is a definite spatial correlation in spatial distribution with constant strengthening. (3) TUR, NDN, MIAT and the area were shown to have a significant role in promoting the ICT service industry, while NW, GDP and ICT Employment were shown to have a significant negative impact on this industry. Correspondingly, two strategies were put forward here: (1) accelerating the inter-provincial networking development of the ICT service industry, and (2) strengthening government policy guidance for the ICT service industry. These outcomes can not only provide a scientific basis and theoretical support for the distribution of strategies and resources for these industries at the theoretical level but also improve resource integration from the national perspective and the efficiency of resource use at the practical level. [ABSTRACT FROM AUTHOR]

The goal of our study was to explore the effect of living conditions on the odd of major and minor ECG abnormalities on a large region scale in Russia. For the analysis, cross-sectional data of the Russian study, ESSE-RF 2013–2014, were used. They were collected on a sample of 16,400 subjects from 10 regions of the Russia. ECG abnormalities were grouped into two categories: Major and Minor (sensu the 2009 version of the Minnesota Code Classification System). Regional living conditions were considered comprehensively via five indices combining 33 characteristics of the regions. The estimates were presented as odds ratios and their 95% confidence intervals. The prevalence values of major abnormalities in the sample were 8.4% among women and 9.4% among men (p = 0.021). The prevalence of minor abnormalities constituted 34.1% and 45.9%, respectively (p < 0.001). In men, the odd of major ECG abnormalities increased with the demographic depression growth (1.08: 1.04–1.12) and with industrial development growth in the region (1.12: 1.07–1.17). In women, an increase in the odd of major ECG abnormalities was directly associated with industrial development (1.12: 1.07–1.16) and inversely related to the economic development in the region (0.94: 0.89–0.99). The odd of minor ECG abnormalities in men and women declined with the growth of the regional economic development: OR of 0.95: 0.93–0.98, and OR of 0.92: 0.87–0.99, respectively. The study demonstrated an effect of regional living conditions of the Russian population on the odd of major and minor ECG abnormalities. The most stable and logically explainable relationships were obtained for industrial and economic characteristics of living conditions. [ABSTRACT FROM AUTHOR]

There is a need to classify and standardize graphene-related materials giving the growing use of this materials industrially. One of the most used and more difficult to classify is graphene oxide (GO). Inconsistent definitions of GO, closely relating it to graphene, are found in the literature and industrial brochures. Hence, although they have very different physicochemical properties and industrial applications, commonly used classifications of graphene and GO definitions are not substantial. Consequently, the lack of regulation and standardization create trust issues among sellers and buyers that impede industrial development and progress. With that in mind, this study offers a critical assessment of 34 commercially available GOs, characterized using a systematic and reliable protocol for accessing their quality. We establish correlations between GO physicochemical properties and its applications leading to rationale for its classification. [ABSTRACT FROM AUTHOR]

The supercritical antisolvent (SAS) process was a green alternative to improve the low bioavailability of insoluble drugs. However, it is difficult for SAS process to industrialize with limited production capacity. A coaxial annular nozzle was used to prepare the microcapsules of aprepitant (APR) and polyvinylpyrrolidone (PVP) by SAS with N, N-Dimethylformamide (DMF) as solvent. Meanwhile, the effects of polymer/drug ratio, operating pressure, operating temperature and overall concentration on particles morphology, mean particle diameter and size distribution were analyzed. Microcapsules with mean diameters ranging from 2.04 μm and 9.84 μm were successfully produced. The morphology, particle size, thermal behavior, crystallinity, drug content, drug dissolution and residual amount of DMF of samples were analyzed. The results revealed that the APR drug dissolution of the microcapsules by SAS process was faster than the unprocessed APR. Furthermore, the drug powder collected every hour is in the kilogram level, verifying the possibility to scale up the production of pharmaceuticals employing the SAS process from an industrial point of view., (© 2024. The Author(s).)

The tremendous increase in industrial development and urbanization has become a severe threat to the Chinese climate and food security. The Agricultural Production System Simulator model was used to simulate soil nitrogen in black soil in Yangling Jilin Province for 20 years. The observed values are consistent with the simulated values. The predicted values of total soil NO3−–N and NH4+–N nitrogen are 10 kg ha−1 and 5 kg ha−1 higher than the observed values. The total soil NO3−–N loss has the same trend as the rainfall, and it increases with the number of rainfall days over the years. The average 20 years losses of NO3−–N and NH4+–N observed were 1375.91 kg ha−1, and 9.24 kg ha−1, while in the simulation increase was 1387.01 kg ha−1 and 9.28 kg ha−1, respectively. The difference between the observed and simulated values of NO3−–N and NH4+–N of mean loss was 11.15 kg ha−1 and 0.04 kg ha−1 respectively. Moreover, our findings highlight the opportunity further to improve management policies (especially for nitrogen) to maintain crop yield. [ABSTRACT FROM AUTHOR]

Population growth, urbanization, and industrial development have significantly increased water demands in many countries, raising the concerns about water resources sustainability to meet the needs of humans and the environment. Furthermore, the economy-oriented allocation of water resources has caused many socio-environmental problems. The main goal of this study is to develop a system dynamics modeling framework that integrates economic, social, and environmental dimensions for the decision of water resources allocation. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) is used to rank modeling scenarios and identify the best strategy for water allocation. In the application to East Azerbaijan province of Iran, six industry groups (including chemical, food and beverage, non-metal, machinery and equipment, metal, and textile), thirteen water allocation scenarios, and five criteria (including profit index, employment index, return of surface water, groundwater sustainability index, and total allocated water) were considered. The TOPSIS results showed that in the best scenario most water was allocated to the non-metal industry with a relative distance of 0.63 to the ideal solution. On the other hand, the current water allocation scenario ranked seventh, indicating that significant improvements are required to take into account the social, economic, and environmental factors for optimal reallocation of water resources among different industry users. [ABSTRACT FROM AUTHOR]

Due to urbanization and industrialization, there has been an increase in solid waste generation and has become a global concern and leakage of leachate from landfills contaminate the soil and groundwater and hence can have a severe impact on human health. The present study aimed to determine the composition of toxic metals (Cr, Mn, Cu, As) and heavy metals (Cd, Ba, Hg, Pb) in soil and water by an inductively coupled plasma optical emission spectrometer (ICP-OES). To ensure accuracy during the analysis of Cr, Mn, Cu, As, Cd, Ba, Hg, and Pb in real samples, certified reference material (CRM, SRM 2709a) of San Joaquin soil and water (SRM 1640a) were analyzed and results were presented in terms of % recovery studies. The mean concentration of all the metals in soil and water did not exceed the limit set by the European Community (EU), WHO, and US EPA except Cu where the permissible limit defined by the EU is 50–140 mg/kg in soil. The soil is uncontaminated to moderately contaminated with respect to all metals except the Cu and Pb. Among the average daily dose (ADD) of soil, ADDing and ADDinh for children had the maximum dose for all metals than adults while ADDderm was higher in adults. Hazard quotient (HQ) trend in both adults and children was found in order HQing > HQderm > HQinh of soil for all metals except Ba which followed HQing > HQinh > HQderm. Hazard index (HI) values of soil for Cr and Pb in children were 7 and 7.5 times higher than adults respectively. Lifetime cancer risk (LCR) value for Cr by different exposure pathways of soil was 5.361 × 10−4 for children which are at the lower borderline of risk for cancer. [ABSTRACT FROM AUTHOR]

The rapid industrial development, high population growth, and rapid urbanization of Saudi Arabia have led to increased pollution and waste levels. Every day, solid waste disposal for governments and local authorities becomes a significant challenge. Saudi Arabia produces over 15 million tonnes of solid waste annually, with a population of around 29 million. The waste production per person is estimated at between 1.5 and 1.8 kg per day per person. About 75% of the population in urban areas is concentrated, making it imperative that government steps are taken to boost the country's waste recycling and management scenario. The production of solid waste in Riyadh, Jeddah, and Dammam, three of the largest cities, exceeds seven million tonnes annually, which shows the enormity of the civic body problem. During this study, the design Expert software was involved in the optimization of process parameters during the collection of municipal solid waste (MSW) from Jeddah city. The use of design experiments and numerical optimization is quite effective in optimizing the different process parameters on the overall cost. Saudi Arabia has a critical need for a resilient waste system and agile waste management system to control its municipal solid waste quickly and environmentally friendly for achieve Saudi Vision 2030. For this study design of experiment, software was employed to optimize the cost per trip, thereby considering process parameters. It is therefore essential to examine the existing practices and future opportunities for solid waste collection, storage, and disposal. This study considered that MSW generated in Saudi Arabia which is having great potential to be converted into wealth. Hence, considering the current environment situation, energy prospective and future management strategies for MSW have also been reviewed. [ABSTRACT FROM AUTHOR]

With growing human culture and industrialization, many pollutants are being introduced into aquatic ecosystems. In recent years, dyes have become a major water pollutant used in the manufacture of paints and other production purposes. In this research, the potential of duckweed (Lemna gibba) plant was investigated spectrophotometrically as an obvious bioagent for the biological decolorization of the organic dye C.I. Basic Green 4 (Malachite Green, BG4). Photosynthetic efficiency analysis showed that the photosynthetic apparatus of L. gibba is very tolerant to BG4. Significant induction of reactive oxygen species (ROS) scavenging enzymes was observed after 24h of biodecolorization process in L. gibba treated with 15 and 30 mg/l BG4. The experimental results showed that L. gibba has a strong ability to extract BG4 from contaminated water and the best results were obtained at 25–30°C and pH 8.0. We conclude that duckweed L. gibba can be used as a potent decolorization organism for BG4. [ABSTRACT FROM AUTHOR]

Achieving the Sustainable Development Goals (SDGs) is a long-term task, which puts forward high requirements on the sustainability of related policies and actions. Using the text analysis method, we analyze the China National Sustainable Communities (CNSCs) policy implemented over 30 years and its effects on achieving SDGs. We find that the national government needs to understand the scope of sustainable development more comprehensively, the sustained actions can produce positive effects under the right goals. The SDGs selection of local governments is affected by local development levels and resource conditions, regions with better economic foundations tend to focus on SDGs on human well-being, regions with weaker foundations show priority to basic SDGs on the economic development, infrastructures and industrialization. [ABSTRACT FROM AUTHOR]

Picea mongolica, a native species with excellent industrial wood quality and strong sand-fixing capacity, may be utilized in construction of urban green spaces in arid areas in China. However, now the sustainability of the ecosystems where this species grows is at serious risk due to a lack of natural regeneration. In this study, we developed an efficient regeneration system and comprehensively analyzed various factors affecting somatic embryogenesis (SE) using zygotic embryos as explants. We identified the optimal plant growth regulators (PGRs) performance and the best donor trees (k81) for the generation of somatic embryos (SEMs). Additionally, we confirmed that the positive developmental window of SEMs initiation was at the end of July to early August, which is when zygotic embryos was at the late embryogeny. In this time period, specific transcripts associated with the regulation of epigenetic modifications, plant hormone-related genes, and embryonic development-related transcription factors play important roles for early SEMs initiation. These results may provide a valuable resource for vegetative propagation of Picea mongolica. Our results may help to establish a reliable protocol for plantlet regeneration, which may facilitate urban greening applications and industrialization in arid areas. [ABSTRACT FROM AUTHOR]

Heavy metals, including chromium, are associated with developed industrialization and technological processes, causing imbalanced ecosystems and severe health concerns. The current study is of supreme priority because there is no previous work that dealt with the modeling of the optimization of the biosorption process by the immobilized cells. The significant parameters (immobilized bacterial cells, contact time, and initial Cr6+ concentrations), affecting Cr6+ biosorption by immobilized Pseudomonas alcaliphila, was verified, using the Plackett–Burman matrix. For modeling the maximization of Cr6+ biosorption, a comparative approach was created between rotatable central composite design (RCCD) and artificial neural network (ANN) to choose the most fitted model that accurately predicts Cr6+ removal percent by immobilized cells. Experimental data of RCCD was employed to train a feed-forward multilayered perceptron ANN algorithm. The predictive competence of the ANN model was more precise than RCCD when forecasting the best appropriate wastewater treatment. After the biosorption, a new shiny large particle on the bead surface was noticed by the scanning electron microscopy, and an additional peak of Cr6+ was appeared by the energy dispersive X-ray analysis, confirming the role of the immobilized bacteria in the biosorption of Cr6+ ions. [ABSTRACT FROM AUTHOR]

Understanding the spatial and temporal patterns of human pressures provides a foundation for understanding interactions between human and environment and managing human activities for a sustainable development. This study is the first attempt focused within China at calculating the spatial–temporal human footprint and its driving forces in a highly urbanized area with intensive human activities. Population, land use, night-time lights, and road impacts were used to generate human footprint maps of Jiangsu Province for 2000, 2010 and 2015 with a resolution of 1 km * 1 km. Five natural drivers and four anthropogenic drivers were employed to construct generalized additive models for explaining the spatial variation of human footprint and its change. It shows that a large difference is between the human footprint in northern and southern Jiangsu, and the pattern of human pressures conforms to the "Matthew effect", with spatial aggregation of high human footprint areas accelerating. Slope, industrialization level are significant in explaining the spatial variation of human footprint in 2000, 2010 and 2015. The effect of natural drivers decreases for explaining the human footprint over time. Furthermore, annual precipitation, mean annual temperature and urban per capita disposable income are also significant drivers for human footprint in 2010 and 2015. And the increasing of human footprint slows with increasing of industrialization level. The difference of industrialization level and urban income between northern and southern Jiangsu mainly caused different driving pattern for human footprint and its change. Our study has generated new insights on the interaction pattern between human and nature in highly developed regions based on the human footprint concept, and can provide references for managing human activities in similar regions rapid socioeconomic development. [ABSTRACT FROM AUTHOR]

Satellite observations of the Ozone Monitoring Instrument (OMI) for tropospheric sulfur dioxide (SO2) and formaldehyde (HCHO) column mass densities (CMD) are analyzed for the period 2005–2016 over the atmosphere of Kazakhstan. Regarding SO2 the major hot spots relate to regions with high population and large industrial facilities. Such an example is the city of Ekibastuz that hosts the biggest thermal power plants in the country and exhibits the higher SO2 CMD at national level. The annual average CMD in Ekibastuz reaches 2.5 × 10−5 kg/m2, whereas for the rest of the country respective values are 6 times lower. Other hotspots, mostly urban conglomerates such as Almaty and Nur-Sultan, experience high CMDs of SO2 in particular years, such as 2008. One of the main reasons for this behavior is the financial crisis of 2008, forcing the application of alternate heating sources based on cheap low-quality coal. Regarding HCHO, an oxygenated Volatile Organic Compound (VOC), the main hot spot is noticed over the city Atyrau, the oil capital of the country where two massive oil fields are located. The highest HCHO CMD (9 × 1015 molecules/cm2) appears in the summertime due to secondary production as a result of the photo-oxidation of VOCs emitted by industrial sectors, oil refinery plants and vehicles. Strongly elevated HCHO amounts are also observed in Nur-Sultan in 2012 that could be due to the residential coal combustion and vehicle exhaust under poor winter dispersion conditions. Significant reductions in HCHO observed between 2012 and 2015 can be attributed to two significant measures implemented in the country in 2013 that aimed at the improvement of air quality: the introduction of the emission trading system (ETS) for greenhouse gases and Euro-4 standards for new vehicles entering the national vehicle fleet. [ABSTRACT FROM AUTHOR]

Organic waste is a rapidly increasing problem due to the growth of the agricultural production needed to meet global food demands. Development of sustainable waste management solutions is essential. Black soldier fly, Hermetia illucens (L.) (Diptera: Stratiomyidae) (BSF), larvae are voracious consumers of a wide range of organic materials ranging from fruits and vegetables to animal remains, and manure. Thanks to this ability and considering the larval high protein and lipid content, BSF larvae are a useful additive in animal feeds and biodiesel production. Unfortunately, the feasibility of using the black soldier fly as a tool for waste valorization and feed production has primarily been investigated at the benchtop scale. Thus, mobilization of current practices to an industrial scale is challenging because scaling up from small laboratory studies to large industrial studies is not necessarily linear. The goal of this study was to demonstrate the ability of the BSF to recycle organic waste at an industrial scale. To accomplish this goal, three organic waste streams were used (e.g., apples, bananas, and spent grain from a brewery) to test six diet treatments (1) apple, (2) banana, (3) spent grain, (4) apple and banana, (5) apple and spent grain, and (6) banana and spent grain. Working at scale of 10,000 BSF larvae life history traits, waste valorization, protein and lipid profiles were measured for each diet treatment. Differences were recorded across all variables, except substrate conversion, for larvae fed on fruit and spent grain (alone or with fruit). Growth rate significantly differed across treatments; larvae reared on spent grain grew twice as fast as those fed apples alone, but those reared on the apple and spent grain mixture produced twice as much insect biomass. However, it should be noted that larvae resulting from the apple diet contained 50% more fat than larvae fed the fruit and spent grain mixtures. Commonly-available organic wastes were successfully used at an industrial scale to produce BSF larvae that have the potential to substitute other sources of protein and lipids in different industrial applications. Industrialization efforts are encouraged to assess these impacts when integrating diverse ingredients into larval diets as a means to more precisely predict output, such as larval development time and final larval biomass. [ABSTRACT FROM AUTHOR]