Search

Low energy surface coatings have found wide range of applications for generating hydrophobic and superhydrophobic surfaces. Most of the studies have been related to use of a single coating material over a single substrate or using a single technique. The degree of hydrophobicity is highly dependent on fabrication processes as well as materials being coated and as such warrants a high-level study using experimental optimization leading to the evaluation of the parametric behavior of coatings and their application techniques. Also, a single platform or system which can predict the required set of parameters for generating hydrophobic surface of required nature for given substrate is of requirement. This work applies the powerful machine learning algorithms (Levenberg Marquardt using Gauss Newton and Gradient methods) to evaluate the various processes affecting the anti-wetting behavior of coated printable paper substrates with the capability to predict the most optimized method of coating and materials that may lead to a desirable surface contact angle. The major application techniques used for this study pertain to dip coating, spray coating, spin coating and inkjet printing and silane and sol–gel base coating materials. [ABSTRACT FROM AUTHOR]

Rigorous comparisons of human and machine learning algorithm performance on the same task help to support accurate claims about algorithm success rates and advances understanding of their performance relative to that of human performers. In turn, these comparisons are critical for supporting advances in artificial intelligence. However, the machine learning community has lacked a standardized, consensus framework for performing the evaluations of human performance necessary for comparison. We demonstrate common pitfalls in a designing the human performance evaluation and propose a framework for the evaluation of human performance, illustrating guiding principles for a successful comparison. These principles are first, to design the human evaluation with an understanding of the differences between human and algorithm cognition; second, to match trials between human participants and the algorithm evaluation, and third, to employ best practices for psychology research studies, such as the collection and analysis of supplementary and subjective data and adhering to ethical review protocols. We demonstrate our framework's utility for designing a study to evaluate human performance on a one-shot learning task. Adoption of this common framework may provide a standard approach to evaluate algorithm performance and aid in the reproducibility of comparisons between human and machine learning algorithm performance., (© 2022. The Author(s).)

Aiming at the problems of insufficient extraction of asynchronous motor fault features by traditional deep learning algorithms and poor diagnosis of asynchronous motor faults in robust noise environments, this paper proposes an end-to-end fault diagnosis method for asynchronous motors based on IInception-CBAM-IBiGRU. The method first uses a signal-to-grayscale image conversion method to convert one-dimensional vibration signals into two-dimensional images and initially extracts shallow features through two-dimensional convolution; then the Improved Inception (IInception) module is used as a residual block to learning features at different scales with a residual structure, and extracts its important feature information through the Convolutional Block Attention Module (CBAM) to extract important feature information and adjust the weight parameters; then the feature information is input to the Improved Bi-directional Gate Recurrent Unit (IBiGRU) to extract its timing features further; finally, the fault identification is achieved by the SoftMax function. The primary hyperparameters in the model are optimized by the Weighted Mean Of Vectors Algorithm (INFO). The experimental results show that the method is effective in fault diagnosis of asynchronous motors, with an accuracy rate close to 100%, and can still maintain a high accuracy rate under the condition of low noise ratio, with good robustness and generalization ability. [ABSTRACT FROM AUTHOR]

Autism spectrum disorder (ASD) is the fourth most common neurodevelopmental disorder, with a prevalence of 1 in 160 children. Accurate diagnosis relies on experts, but such individuals are scarce. This has led to increasing interest in the development of machine learning (ML) models that can integrate neuroimaging features from functional and structural MRI (fMRI and sMRI) to help reveal central nervous system alterations characteristic of ASD. We optimized and compared the performance of 12 of the most popular and powerful ML models. Each was separately trained using 15 different combinations of fMRI and sMRI features and optimized with an unbiased model search. Deep learning models predicted ASD with the highest diagnostic accuracy and generalized well to other MRI datasets. Our model achieves state-of-the-art 80% area under the ROC curve (AUROC) in diagnosis on test data from the IMPAC dataset; and 86% and 79% AUROC on the external ABIDE I and ABIDE II datasets (with further improvement to 93% and 90% after supervised domain adaptation). The highest performing models identified reproducible putative biomarkers for accurate ASD diagnosis in accord with known ASD markers as well as novel cerebellar biomarkers. Such reproducibility lends credence to their tremendous potential for defining and using a set of truly generalizable ASD biomarkers that will advance scientific understanding of neuronal changes in ASD., (© 2022. The Author(s).)

When traditional EEG signals are collected based on the Nyquist theorem, long-time recordings of EEG signals will produce a large amount of data. At the same time, limited bandwidth, end-to-end delay, and memory space will bring great pressure on the effective transmission of data. The birth of compressed sensing alleviates this transmission pressure. However, using an iterative compressed sensing reconstruction algorithm for EEG signal reconstruction faces complex calculation problems and slow data processing speed, limiting the application of compressed sensing in EEG signal rapid monitoring systems. As such, this paper presents a non-iterative and fast algorithm for reconstructing EEG signals using compressed sensing and deep learning techniques. This algorithm uses the improved residual network model, extracts the feature information of the EEG signal by one-dimensional dilated convolution, directly learns the nonlinear mapping relationship between the measured value and the original signal, and can quickly and accurately reconstruct the EEG signal. The method proposed in this paper has been verified by simulation on the open BCI contest dataset. Overall, it is proved that the proposed method has higher reconstruction accuracy and faster reconstruction speed than the traditional CS reconstruction algorithm and the existing deep learning reconstruction algorithm. In addition, it can realize the rapid reconstruction of EEG signals. [ABSTRACT FROM AUTHOR]

After chronic low back pain, Temporomandibular Joint (TMJ) disorders are the second most common musculoskeletal condition affecting 5 to 12% of the population, with an annual health cost estimated at $4 billion. Chronic disability in TMJ osteoarthritis (OA) increases with aging, and the main goal is to diagnosis before morphological degeneration occurs. Here, we address this challenge using advanced data science to capture, process and analyze 52 clinical, biological and high-resolution CBCT (radiomics) markers from TMJ OA patients and controls. We tested the diagnostic performance of four machine learning models: Logistic Regression, Random Forest, LightGBM, XGBoost. Headaches, Range of mouth opening without pain, Energy, Haralick Correlation, Entropy and interactions of TGF-β1 in Saliva and Headaches, VE-cadherin in Serum and Angiogenin in Saliva, VE-cadherin in Saliva and Headaches, PA1 in Saliva and Headaches, PA1 in Saliva and Range of mouth opening without pain; Gender and Muscle Soreness; Short Run Low Grey Level Emphasis and Headaches, Inverse Difference Moment and Trabecular Separation accurately diagnose early stages of this clinical condition. Our results show the XGBoost + LightGBM model with these features and interactions achieves the accuracy of 0.823, AUC 0.870, and F1-score 0.823 to diagnose the TMJ OA status. Thus, we expect to boost future studies into osteoarthritis patient-specific therapeutic interventions, and thereby improve the health of articular joints.

This paper presents a data processing pipeline designed to extract information from the hyperspectral signature of unknown space objects. The methodology proposed in this paper determines the material composition of space objects from single pixel images. Two techniques are used for material identification and classification: one based on machine learning and the other based on a least square match with a library of known spectra. From this information, a supervised machine learning algorithm is used to classify the object into one of several categories based on the detection of materials on the object. The behaviour of the material classification methods is investigated under non-ideal circumstances, to determine the effect of weathered materials, and the behaviour when the training library is missing a material that is present in the object being observed. Finally the paper will present some preliminary results on the identification and classification of space objects. [ABSTRACT FROM AUTHOR]

Nowadays many tools are in use in processes related to handling bug reports, feature requests, supporting questions or similar related issues which should be handled during software development or maintenance. Part of them use machine learning techniques. In introduction is presented a review of fundamental methods used for evaluation of machine learning models. This paper points out weak points of currently used metrics for evaluation in specific context of the cases related to software development especially bug reports. The disadvantages of state of the art are related to disregarding time dependencies which are important to be applied for creating train and test sets as they may have impact on results. Extensive research of the art has been conducted and has not been found any article with the use of time dependencies for evaluation of machine learning models in the context of works related to software development applications like machine learning solutions to supporting bug tracking systems. This paper introduces a novel solution which is devoid of these drawbacks. Experimental research showed the effectiveness of the introduced method and significantly different results obtained compared to the state-of-the-art methods. [ABSTRACT FROM AUTHOR]

The mining of open pit mines is widespread in China, and there are many cases of landslide accidents. Therefore, the problem of slope stability is highlighted. The stability of the slope is a factor that directly affects the mining efficiency and the safety of the entire mining process. According to the statistics, there is a 15 percent chance of finding landslide risk in China's large-scale mines. And due to the expansion of the mining scale of the enterprise, the problem of slope stability has become increasingly obvious, which has become a major subject in the study of open-pit mine engineering. In order to better predict the slope stability coefficient, this study takes a mine in China as a case to deeply discuss the accuracy of different algorithms in the stability calculation, and then uses a deep learning algorithm to study the stability under rainfall conditions. The change of the coefficient and the change of the stability coefficient before and after the slope treatment are experimentally studied with the displacement of the monitoring point. The result shows that the safety coefficient calculated by the algorithm in this paper is about 7% lower than that of the traditional algorithm. In the slope stability analysis before treatment, the safety factor calculated by the algorithm in this paper is 1.086, and the algorithm in this paper is closer to reality. In the stability analysis of the slope after treatment, the safety factor calculated by the algorithm in this paper is 1.227, and the stability factor meets the requirements of the specification. It also shows that the deep learning algorithm effectively improves the efficiency of the slope stability factor prediction and improves security during project development. [ABSTRACT FROM AUTHOR]

This paper proposes a forward layer-wise learning algorithm for CNNs in classification problems. The algorithm utilizes the Separation Index (SI) as a supervised complexity measure to evaluate and train each layer in a forward manner. The proposed method explains that gradually increasing the SI through layers reduces the input data's uncertainties and disturbances, achieving a better feature space representation. Hence, by approximating the SI with a variant of local triplet loss at each layer, a gradient-based learning algorithm is suggested to maximize it. Inspired by the NGRAD (Neural Gradient Representation by Activity Differences) hypothesis, the proposed algorithm operates in a forward manner without explicit error information from the last layer. The algorithm's performance is evaluated on image classification tasks using VGG16, VGG19, AlexNet, and LeNet architectures with CIFAR-10, CIFAR-100, Raabin-WBC, and Fashion-MNIST datasets. Additionally, the experiments are applied to text classification tasks using the DBPedia and AG's News datasets. The results demonstrate that the proposed layer-wise learning algorithm outperforms state-of-the-art methods in accuracy and time complexity. [ABSTRACT FROM AUTHOR]

Programmed death-ligand 1 (PD-L1) expression is currently used in the clinic to assess eligibility for immune-checkpoint inhibitors via the tumor proportion score (TPS), but its efficacy is limited by high interobserver variability. Multiple papers have presented systems for the automatic quantification of TPS, but none report on the task of determining cell-level PD-L1 expression and often reserve their evaluation to a single PD-L1 monoclonal antibody or clinical center. In this paper, we report on a deep learning algorithm for detecting PD-L1 negative and positive tumor cells at a cellular level and evaluate it on a cell-level reference standard established by six readers on a multi-centric, multi PD-L1 assay dataset. This reference standard also provides for the first time a benchmark for computer vision algorithms. In addition, in line with other papers, we also evaluate our algorithm at slide-level by measuring the agreement between the algorithm and six pathologists on TPS quantification. We find a moderately low interobserver agreement at cell-level level (mean reader-reader F1 score = 0.68) which our algorithm sits slightly under (mean reader-AI F1 score = 0.55), especially for cases from the clinical center not included in the training set. Despite this, we find good AI-pathologist agreement on quantifying TPS compared to the interobserver agreement (mean reader-reader Cohen's kappa = 0.54, 95% CI 0.26–0.81, mean reader-AI kappa = 0.49, 95% CI 0.27—0.72). In conclusion, our deep learning algorithm demonstrates promise in detecting PD-L1 expression at a cellular level and exhibits favorable agreement with pathologists in quantifying the tumor proportion score (TPS). We publicly release our models for use via the Grand-Challenge platform. [ABSTRACT FROM AUTHOR]

The relentless pursuit of miniaturization and performance enhancement in electronic devices has led to a fundamental challenge in the field of circuit design and simulation-how to accurately account for the inherent stochastic nature of certain devices. While conventional deterministic models have served as indispensable tools for circuit designers, they fall short when it comes to capturing the subtle yet critical variability exhibited by many electronic components. In this paper, we present an innovative approach that transcends the limitations of traditional modeling techniques by harnessing the power of machine learning, specifically Mixture Density Networks (MDNs), to faithfully represent and simulate the stochastic behavior of electronic devices. We demonstrate our approach to model heater cryotrons, where the model is able to capture the stochastic switching dynamics observed in the experiment. Our model shows 0.82% mean absolute error for switching probability. This paper marks a significant step forward in the quest for accurate and versatile compact models, poised to drive innovation in the realm of electronic circuits. [ABSTRACT FROM AUTHOR]

This paper presents a cutting-edge Sustainable Power Management System for Light Electric Vehicles (LEVs) using a Hybrid Energy Storage Solution (HESS) integrated with Machine Learning (ML)-enhanced control. The system's central feature is its ability to harness renewable energy sources, such as Photovoltaic (PV) panels and supercapacitors, which overcome traditional battery-dependent constraints. The proposed control algorithm orchestrates power sharing among the battery, supercapacitor, and PV sources, optimizing the utilization of available renewable energy and ensuring stringent voltage regulation of the DC bus. Notably, the ML-based control ensures precise torque and speed regulation, resulting in significantly reduced torque ripple and transient response times. In practical terms, the system maintains the DC bus voltage within a mere 2.7% deviation from the nominal value under various operating conditions, a substantial improvement over existing systems. Furthermore, the supercapacitor excels at managing rapid variations in load power, while the battery adjusts smoothly to meet the demands. Simulation results confirm the system's robust performance. The HESS effectively maintains voltage stability, even under the most challenging conditions. Additionally, its torque response is exceptionally robust, with negligible steady-state torque ripple and fast transient response times. The system also handles speed reversal commands efficiently, a vital feature for real-world applications. By showcasing these capabilities, the paper lays the groundwork for a more sustainable and efficient future for LEVs, suggesting pathways for scalable and advanced electric mobility solutions. [ABSTRACT FROM AUTHOR]

In this study, the deep learning algorithm of Convolutional Neural Network long short-term memory (CNN–LSTM) is used to classify various jewelry rocks such as agate, turquoise, calcites, and azure from various historical periods and styles related to Shahr-e Sokhteh. Here, the CNN–LSTM architecture includes utilizing CNN layers for the extraction of features from input data mixed with LSTMs for supporting sequence forecasting. It should be mentioned that interpretable deep learning-assisted laser induced breakdown spectroscopy helped achieve excellent performance. For the first time, this paper interprets the Convolutional LSTM effectiveness layer by layer in self-adaptively obtaining LIBS features and the quantitative data of major chemical elements in jewelry rocks. Moreover, Lasso method is applied on data as a factor for investigation of interoperability. The results demonstrated that LIBS can be essentially combined with a deep learning algorithm for the classification of different jewelry songs. The proposed methodology yielded high accuracy, confirming the effectiveness and suitability of the approach in the discrimination process. [ABSTRACT FROM AUTHOR]

The triage process in emergency departments (EDs) relies on the subjective assessment of medical practitioners, making it unreliable in certain aspects. There is a need for a more accurate and objective algorithm to determine the urgency of patients. This paper explores the application of advanced data-synthesis algorithms, machine learning (ML) algorithms, and ensemble models to predict patient mortality. Patients predicted to be at risk of mortality are in a highly critical condition, signifying an urgent need for immediate medical intervention. This paper aims to determine the most effective method for predicting mortality by enhancing the F1 score while maintaining high area under the receiver operating characteristic curve (AUC) score. This study used a dataset of 7325 patients who visited the Yonsei Severance Hospital's ED, located in Seoul, South Korea. The patients were divided into two groups: patients who deceased in the ED and patients who didn't. Various data-synthesis techniques, such as SMOTE, ADASYN, CTGAN, TVAE, CopulaGAN, and Gaussian Copula, were deployed to generate synthetic patient data. Twenty two ML models were then utilized, including tree-based algorithms like Decision tree, AdaBoost, LightGBM, CatBoost, XGBoost, NGBoost, TabNet, which are deep neural network algorithms, and statistical algorithms such as Support Vector Machine, Logistic Regression, Random Forest, k-nearest neighbors, and Gaussian Naive Bayes, as well as Ensemble Models which use the results from the ML models. Based on 21 patient information features used in the pandemic influenza triage algorithm (PITA), the models explained previously were applied to aim for the prediction of patient mortality. In evaluating ML algorithms using an imbalanced medical dataset, conventional metrics like accuracy scores or AUC can be misleading. This paper emphasizes the importance of using the F1 score as the primary performance measure, focusing on recall and specificity in detecting patient mortality. The highest-ranked model for predicting mortality utilized the Gaussian Copula data-synthesis technique and the CatBoost classifier, achieving an AUC of 0.9731 and an F1 score of 0.7059. These findings highlight the effectiveness of machine learning algorithms and data-synthesis techniques in improving the prediction performance of mortality in EDs. [ABSTRACT FROM AUTHOR]

Nature finds a way to leverage nanotextures to achieve desired functions. Recent advances in nanotechnologies endow fascinating multi-functionalities to nanotextures by modulating the nanopixel's height. But nanoscale height control is a daunting task involving chemical and/or physical processes. As a facile, cost-effective, and potentially scalable remedy, the nanoscale capillary force lithography (CFL) receives notable attention. The key enabler is optical pre-modification of photopolymer's characteristics via ultraviolet (UV) exposure. Still, the underlying physics of the nanoscale CFL is not well understood, and unexplained phenomena such as the "forbidden gap" in the nano capillary rise (unreachable height) abound. Due to the lack of large data, small length scales, and the absence of first principles, direct adoptions of machine learning or analytical approaches have been difficult. This paper proposes a hybrid intelligence approach in which both artificial and human intelligence coherently work together to unravel the hidden rules with small data. Our results show promising performance in identifying transparent, physics-retained rules of air diffusivity, dynamic viscosity, and surface tension, which collectively appear to explain the forbidden gap in the nanoscale CFL. This paper promotes synergistic collaborations of humans and AI for advancing nanotechnology and beyond. [ABSTRACT FROM AUTHOR]

Pulse-coupled neural networks perform well in many fields such as information retrieval, depth estimation and object detection. Based on pulse coupled neural network (PCNN) theory, this paper constructs a visual perception model framework and builds a real image reproduction platform. The model firstly analyzes the structure and generalization ability of neural network multi-class classifier, uses the minimax criterion of feature space as the splitting criterion of visual perception decision node, which solves the generalization problem of neural network learning algorithm. In the simulation process, the initial threshold is optimized by the two-dimensional maximum inter-class variance method, and in order to improve the real-time performance of the algorithm, the fast recurrence formula of neural network is derived and given. The PCNN image segmentation method based on genetic algorithm is analyzed. The genetic algorithm improves the loop termination condition and the adaptive setting of model parameters of PCNN image segmentation algorithm, but the PCNN image segmentation algorithm still has the problem of complexity. In order to solve this problem, this paper proposed an IGA-PCNN image segmentation method combining the improved algorithm and PCNN model. Firstly, it used the improved immune genetic algorithm to adaptively obtain the optimal threshold, and then replaced the dynamic threshold in PCNN model with the optimal threshold, and finally used the pulse coupling characteristics of PCNN model to complete the image segmentation. From the coupling characteristics of PCNN, junction close space of image and gray level characteristics, it determined the local gray mean square error of image connection strength coefficient. The feature extraction and object segmentation properties of PCNN come from the spike frequency of neurons, and the number of neurons in PCNN is equal to the number of pixels in the input image. In addition, the spatial and gray value differences of pixels should be considered comprehensively to determine their connection matrix. Digital experiments show that the multi-scale multi-task pulse coupled neural network model can shorten the total training time by 17 h, improve the comprehensive accuracy of the task test data set by 1.04%, and shorten the detection time of each image by 4.8 s compared with the series network model of multiple single tasks. Compared with the traditional PCNN algorithm, it has the advantages of fast visual perception and clear target contour segmentation, and effectively improves the anti-interference performance of the model. [ABSTRACT FROM AUTHOR]

The preparation process and composition design of heavy-section ductile iron are the key factors affecting its fracture toughness. These factors are challenging to address due to the long casting cycle, high cost and complex influencing factors of this type of iron. In this paper, 18 cubic physical simulation test blocks with 400 mm wall thickness were prepared by adjusting the C, Si and Mn contents in heavy-section ductile iron using a homemade physical simulation casting system. Four locations with different cooling rates were selected for each specimen, and 72 specimens with different compositions and cooling times of the heavy-section ductile iron were prepared. Six machine learning-based heavy-section ductile iron fracture toughness predictive models were constructed based on measured data with the C content, Si content, Mn content and cooling rate as input data and the fracture toughness as the output data. The experimental results showed that the constructed bagging model has high accuracy in predicting the fracture toughness of heavy-section ductile iron, with a coefficient of coefficient (R2) of 0.9990 and a root mean square error (RMSE) of 0.2373. [ABSTRACT FROM AUTHOR]

Mental workload refers to the cognitive effort required to perform tasks, and it is an important factor in various fields, including system design, clinical medicine, and industrial applications. In this paper, we propose innovative methods to assess mental workload from EEG data that use effective brain connectivity for the purpose of extracting features, a hierarchical feature selection algorithm to select the most significant features, and finally machine learning models. We have used the Simultaneous Task EEG Workload (STEW) dataset, an open-access collection of raw EEG data from 48 subjects. We extracted brain-effective connectivities by the direct directed transfer function and then selected the top 30 connectivities for each standard frequency band. Then we applied three feature selection algorithms (forward feature selection, Relief-F, and minimum-redundancy-maximum-relevance) on the top 150 features from all frequencies. Finally, we applied sevenfold cross-validation on four machine learning models (support vector machine (SVM), linear discriminant analysis, random forest, and decision tree). The results revealed that SVM as the machine learning model and forward feature selection as the feature selection method work better than others and could classify the mental workload levels with accuracy equal to 89.53% (± 1.36)., (© 2024. The Author(s).)

Since the existing visual question answering model lacks long-term memory modules for answering complex questions, it is easy to cause the loss of effective information. In order to further improve the accuracy of the visual question answering model, this paper applies the multiple attention mechanism combining channel attention and spatial attention to memory networks for the first time and proposes a dynamic memory network model (DMN-MA) based on the multiple attention mechanism. The model uses the multiple attention mechanism in the situational memory module to obtain the most relevant visual vectors for answering questions based on continuous memory updating, storage and iterative inference of the questions, and effectively uses contextual information for answer inference. The experimental results show that the accuracy of the model in this paper reaches 64.57% and 67.18% on the large-scale public datasets COCO-QA and VQA2.0, respectively. [ABSTRACT FROM AUTHOR]

Climate change affects patterns and uncertainties associated with river water regimes, which significantly impact hydropower generation and reservoir storage operation. Hence, reliable and accurate short-term inflow forecasting is vital to face climate effects better and improve hydropower scheduling performance. This paper proposes a Causal Variational Mode Decomposition (CVD) preprocessing framework for the inflow forecasting problem. CVD is a preprocessing feature selection framework that is built upon multiresolution analysis and causal inference. CVD can reduce computation time while increasing forecasting accuracy by down-selecting the most relevant features to the target value (inflow in a specific location). Moreover, the proposed CVD framework is a complementary step to any machine learning-based forecasting method as it is tested with four different forecasting algorithms in this paper. CVD is validated using actual data from a river system downstream of a hydropower reservoir in the southwest of Norway. The experimental results show that CVD-LSTM reduces forecasting error metric by almost 70% compared with a baseline (scenario 1) and reduces by 25% compared to an LSTM for the same composition of input data (scenario 4). [ABSTRACT FROM AUTHOR]

Self-piercing riveting (SPR) has been widely used in automobile body jointing. However, the riveting process is prone to various forming quality failures, such as empty riveting, repeated riveting, substrate cracking, and other riveting defects. This paper combines deep learning algorithms to achieve non-contact monitoring of SPR forming quality. And a lightweight convolutional neural network with higher accuracy and less computational effort is designed. The ablation and comparative experiments results show that the lightweight convolutional neural network proposed in this paper achieves improved accuracy and reduced computational complexity. Compared with the original algorithm, the algorithm's accuracy in this paper is increased by 4.5 % , and the recall is increased by 1.4 % . In addition, the amount of redundant parameters is reduced by 86.5 % , and the amount of computation is reduced by 47.33 % . This method can effectively overcome the limitations of low efficiency, high work intensity, and easy leakage of manual visual inspection methods and provide a more efficient solution for monitoring the quality of SPR forming quality. [ABSTRACT FROM AUTHOR]

In today's rapidly changing economy, efficient lifestyle has become the current situation of most mobile product users. With the development of performance tools and technologies, a fast lifestyle has brought more wealth and opportunities to users. The slow pace and fluctuating time are indirect income losses, which cause user anxiety to some extent. When the waiting time exceeds the user's waiting threshold, users would experience negative emotions, such as boredom, anxiety and anger, and product satisfaction would drop significantly. Therefore, by analyzing the uniqueness of mobile Internet products and the characteristics of users, this paper studied the reasons and influencing factors of product interactive waiting, and then used machine learning algorithm to analyze the cost function of interactive waiting experience. Finally, the corresponding interactive waiting experience design strategy was proposed. By comparison, the user experience after product interaction optimization design was 8.4% higher than that before product interaction optimization design, and the user frequency was also 14.7% higher after optimization design. In short, user experience plays an important role in product interaction design. [ABSTRACT FROM AUTHOR]

This paper explores the potential benefits of quantum coherence and quantum discord in the non-universal quantum computing model called deterministic quantum computing with one qubit (DQC1) in supervised machine learning. We show that the DQC1 model can be leveraged to develop an efficient method for estimating complex kernel functions. We demonstrate a simple relationship between coherence consumption and the kernel function, a crucial element in machine learning. The paper presents an implementation of a binary classification problem on IBM hardware using the DQC1 model and analyzes the impact of quantum coherence and hardware noise. The advantage of our proposal lies in its utilization of quantum discord, which is more resilient to noise than entanglement. [ABSTRACT FROM AUTHOR]

It is essential to predict carbon prices precisely in order to reduce CO2 emissions and mitigate global warming. As a solution to the limitations of a single machine learning model that has insufficient forecasting capability in the carbon price prediction problem, a carbon price prediction model (GWO–XGBOOST–CEEMDAN) based on the combination of grey wolf optimizer (GWO), extreme gradient boosting (XGBOOST), and complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) is put forward in this paper. First, a random forest (RF) method is employed to screen the primary carbon price indicators and determine the main influencing factors. Second, the GWO–XGBOOST model is established, and the GWO algorithm is utilized to optimize the XGBOOST model parameters. Finally, the residual series of the GWO–XGBOOST model are decomposed and corrected using the CEEMDAN method to produce the GWO–XGBOOST–CEEMDAN model. Three carbon emission trading markets, Guangdong, Hubei, and Fujian, were experimentally predicted to verify the model's validity. Based on the experimental results, it has been demonstrated that the proposed hybrid model has enhanced prediction precision compared to the comparison model, providing an effective experimental method for the prediction of future carbon prices. [ABSTRACT FROM AUTHOR]

One of the main challenges in screening of enhanced oil recovery (EOR) techniques is the class imbalance problem, where the number of different EOR techniques is not equal. This problem hinders the generalization of the data-driven methods used to predict suitable EOR techniques for candidate reservoirs. The main purpose of this paper is to propose a novel approach to overcome the above challenge by taking advantage of the Power-Law Committee Machine (PLCM) technique optimized by Particle Swam Optimization (PSO) to combine the output of five cutting-edge machine learning methods with different types of learning algorithms. The PLCM method has not been used in previous studies for EOR screening. The machine learning models include the Artificial Neural Network (ANN), CatBoost, Random Forest (RF), K-Nearest Neighbors (KNN), and Support Vector Machine (SVM). The CatBoost is used for the first time in this work for screening of EOR methods. The role of the PSO is to find the optimal values for the coefficients and exponents of the power-law model. In this study, a bigger dataset than those in previous studies, including 2563 successful worldwide EOR experiences, was gathered. A bigger dataset improves the generalization of the data-driven methods and prevents overfitting. The hyperparameters of the individual machine-learning models were tuned using the fivefold cross-validation technique. The results showed that all the individual methods could predict the suitable EOR method for unseen cases with an average score of 0.868. Among the machine learning models, the KNN and SVM had the highest scores with a value of 0.894 and 0.892, respectively. Nonetheless, after combining the output of the models using the PLCM method, the score of the predictions improved to 0.963, which was a substantial increase. Finally, a feature importance analysis was conducted to find out the most influential parameters on the output. The novelty of this work is having shown the ability of the PLCM technique to construct an accurate model to overcome the class-imbalance issue in EOR screening by utilizing different types of data-driven models. According to feature importance analysis, oil gravity and formation porosity were recognized as the most influential parameters on EOR screening. [ABSTRACT FROM AUTHOR]

In this paper, we prove the existence of a reservoir that has a finite-dimensional output and makes the reservoir computing model universal. Reservoir computing is a method for dynamical system approximation that trains the static part of a model but fixes the dynamical part called the reservoir. Hence, reservoir computing has the advantage of training models with a low computational cost. Moreover, fixed reservoirs can be implemented as physical systems. Such reservoirs have attracted attention in terms of computation speed and energy consumption. The universality of a reservoir computing model is its ability to approximate an arbitrary system with arbitrary accuracy. Two sufficient reservoir conditions to make the model universal have been proposed. The first is the combination of fading memory and the separation property. The second is the neighborhood separation property, which we proposed recently. To date, it has been unknown whether a reservoir with a finite-dimensional output can satisfy these conditions. In this study, we prove that no reservoir with a finite-dimensional output satisfies the former condition. By contrast, we propose a single output reservoir that satisfies the latter condition. This implies that, for any dimension, a reservoir making the model universal exists with the output of that specified dimension. These results clarify the practical importance of our proposed conditions. [ABSTRACT FROM AUTHOR]

Specific industrial or research applications necessitate specialized displacement measurement conditions, thereby driving researchers to innovate sensors based on novel operating principles. One such challenging condition is the prevalence of strong electromagnetic waves, which precludes using any sensor with a metallic structure or one that operates on electrical measurement principles. Additionally, space constraints in applications requiring multidimensional displacement measurements mandate the development of sensors capable of measuring displacements simultaneously in multiple directions. This paper introduces a novel soft sensor designed to simultaneously measure linear and rotational displacements using Soft Pneumatic Sensing Chambers (SPSCs). This sensor is unique in its ability to measure both linear and rotational movements and, due to its Electro-Magnetic Compatibility (EMC) and compact size, is suitable for environments with significant electromagnetic interference and spatial constraints. Furthermore, its flexibility makes it appropriate for body-interacting applications. The Abaqus software was employed to optimize the operating parameters. Subsequently, a laboratory setup was assembled, and the sensor's performance was assessed using two calibration methods: mathematical modeling and machine learning. According to the machine learning method, the accuracy in the linear and rotational directions was 0.49 mm and 5.4°, while the Root Mean Square Error (RMSE) was 0.05mm and 0.48°, respectively. [ABSTRACT FROM AUTHOR]

Semiconductor wafer manufacturing relies on the precise control of various performance metrics to ensure the quality and reliability of integrated circuits. In particular, GaN has properties that are advantageous for high voltage and high frequency power devices; however, defects in the substrate growth and manufacturing are preventing vertical devices from performing optimally. This paper explores the application of machine learning techniques utilizing data obtained from optical profilometry as input variables to predict the probability of a wafer meeting performance metrics, specifically the breakdown voltage (Vbk). By incorporating machine learning techniques, it is possible to reliably predict performance metrics that cause devices to fail at low voltage. For diodes that fail at a higher (but still below theoretical) breakdown voltage, alternative inspection methods or a combination of several experimental techniques may be necessary. [ABSTRACT FROM AUTHOR]

Sensors, wearables, mobile devices, and other Internet of Things (IoT) devices are becoming increasingly integrated into all aspects of our lives. They are capable of gathering enormous amounts of data, such as image data, which can then be sent to the cloud for processing. However, this results in an increase in network traffic and latency. To overcome these difficulties, edge computing has been proposed as a paradigm for computing that brings processing closer to the location where data is produced. This paper explores the merging of cloud and edge computing for IoT and investigates approaches using machine learning for dimensionality reduction of images on the edge, employing the autoencoder deep learning-based approach and principal component analysis (PCA). The encoded data is then sent to the cloud server, where it is used directly for any machine learning task without significantly impacting the accuracy of the data processed in the cloud. The proposed approach has been evaluated on an object detection task using a set of 4000 images randomly chosen from three datasets: COCO, human detection, and HDA datasets. Results show that a 77% reduction in data did not have a significant impact on the object detection task's accuracy. [ABSTRACT FROM AUTHOR]

Feature selection is a critical component of machine learning and data mining to remove redundant and irrelevant features from a dataset. The Chimp Optimization Algorithm (CHoA) is widely applicable to various optimization problems due to its low number of parameters and fast convergence rate. However, CHoA has a weak exploration capability and tends to fall into local optimal solutions in solving the feature selection process, leading to ineffective removal of irrelevant and redundant features. To solve this problem, this paper proposes the Enhanced Chimp Hierarchy Optimization Algorithm for adaptive lens imaging (ALI-CHoASH) for searching the optimal classification problems for the optimal subset of features. Specifically, to enhance the exploration and exploitation capability of CHoA, we designed a chimp social hierarchy. We employed a novel social class factor to label the class situation of each chimp, enabling effective modelling and optimization of the relationships among chimp individuals. Then, to parse chimps' social and collaborative behaviours with different social classes, we introduce other attacking prey and autonomous search strategies to help chimp individuals approach the optimal solution faster. In addition, considering the poor diversity of chimp groups in the late iteration, we propose an adaptive lens imaging back-learning strategy to avoid the algorithm falling into a local optimum. Finally, we validate the improvement of ALI-CHoASH in exploration and exploitation capabilities using several high-dimensional datasets. We also compare ALI-CHoASH with eight state-of-the-art methods in classification accuracy, feature subset size, and computation time to demonstrate its superiority. [ABSTRACT FROM AUTHOR]

Colorectal cancer (CRC) exhibits a significant death rate that consistently impacts human lives worldwide. Histopathological examination is the standard method for CRC diagnosis. However, it is complicated, time-consuming, and subjective. Computer-aided diagnostic (CAD) systems using digital pathology can help pathologists diagnose CRC faster and more accurately than manual histopathology examinations. Deep learning algorithms especially convolutional neural networks (CNNs) are advocated for diagnosis of CRC. Nevertheless, most previous CAD systems obtained features from one CNN, these features are of huge dimension. Also, they relied on spatial information only to achieve classification. In this paper, a CAD system is proposed called "Color-CADx" for CRC recognition. Different CNNs namely ResNet50, DenseNet201, and AlexNet are used for end-to-end classification at different training–testing ratios. Moreover, features are extracted from these CNNs and reduced using discrete cosine transform (DCT). DCT is also utilized to acquire spectral representation. Afterward, it is used to further select a reduced set of deep features. Furthermore, DCT coefficients obtained in the previous step are concatenated and the analysis of variance (ANOVA) feature selection approach is applied to choose significant features. Finally, machine learning classifiers are employed for CRC classification. Two publicly available datasets were investigated which are the NCT-CRC-HE-100 K dataset and the Kather_texture_2016_image_tiles dataset. The highest achieved accuracy reached 99.3% for the NCT-CRC-HE-100 K dataset and 96.8% for the Kather_texture_2016_image_tiles dataset. DCT and ANOVA have successfully lowered feature dimensionality thus reducing complexity. Color-CADx has demonstrated efficacy in terms of accuracy, as its performance surpasses that of the most recent advancements. [ABSTRACT FROM AUTHOR]

Maximizing microwave passive component performance demands precise parameter tuning, particularly as modern circuits grow increasingly intricate. Yet, achieving this often requires a comprehensive approach due to their complex geometries and miniaturized structures. However, the computational burden of optimizing these components via full-wave electromagnetic (EM) simulations is substantial. EM analysis remains crucial for circuit reliability, but the expense of conducting rudimentary EM-driven global optimization by means of popular bio-inspired algorithms is impractical. Similarly, nonlinear system characteristics pose challenges for surrogate-assisted methods. This paper introduces an innovative technique leveraging variable-fidelity EM simulations and response feature technology within a kriging-based machine-learning framework for cost-effective global parameter tuning of microwave passives. The efficiency of this approach stems from performing most operations at the low-fidelity simulation level and regularizing the objective function landscape through the response feature method. The primary prediction tool is a co-kriging surrogate, while a particle swarm optimizer, guided by predicted objective function improvements, handles the search process. Rigorous validation demonstrates the proposed framework's competitive efficacy in design quality and computational cost, typically requiring only sixty high-fidelity EM analyses, juxtaposed with various state-of-the-art benchmark methods. These benchmarks encompass nature-inspired algorithms, gradient search, and machine learning techniques directly interacting with the circuit's frequency characteristics. [ABSTRACT FROM AUTHOR]

The application of artificial intelligence (AI) in predictive analytics is growing in popularity. It has the power to offer ground-breaking solutions for a range of social problems and real world societal difficulties. It is helpful in addressing some of the social issues that today's world seems incapable of solving. One of the most significant phenomena affecting people's lives is divorce. The goal of this paper is to study the use of machine learning algorithms to determine the effectiveness of divorce predictor scale (DPS) and identify the reasons that usually lead to divorce in the scenario of Hail region, KSA. For this purpose, in this study, the DPS, based on Gottman couples therapy, was used to predict divorce by applying different machine learning algorithms. There were 54 items of the DPS used as features or attributes for data collection. In addition to the DPS, a personal information form was utilized to gather participants' personal data in order to conduct this study in a more structured and traditional manner. Out of 148 participants 116 participants were married whereas 32 were divorced. With the use of algorithms artificial neural network (ANN), naïve bayes (NB), and random forest (RF), the effectiveness of DPS was examined in this study. The correlation based feature selection method was used to identify the top six features from the same dataset and the highest accuracy rate was 91.66% with RF. The results show that DPS can predict divorce. This scale can help family counselors and therapists in case formulation and intervention plan development process. Additionally, it may be argued that the Hail region, KSA sampling confirmed the Gottman couples treatment predictors. [ABSTRACT FROM AUTHOR]

This paper explores the boosting ridge (BR) framework in the extreme learning machine (ELM) community and presents a novel model that trains the base learners as a global ensemble. In the context of Extreme Learning Machine single-hidden-layer networks, the nodes in the hidden layer are preconfigured before training, and the optimisation is performed on the weights in the output layer. The previous implementation of the BR ensemble with ELM (BRELM) as base learners fix the nodes in the hidden layer for all the ELMs. The ensemble learning method generates different output layer coefficients by reducing the residual error of the ensemble sequentially as more base learners are added to the ensemble. As in other ensemble methodologies, base learners are selected until fulfilling ensemble criteria such as size or performance. This paper proposes a global learning method in the BR framework, where base learners are not added step by step, but all are calculated in a single step looking for ensemble performance. This method considers (i) the configurations of the hidden layer are different for each base learner, (ii) the base learners are optimised all at once, not sequentially, thus avoiding saturation, and (iii) the ensemble methodology does not have the disadvantage of working with strong classifiers. Various regression and classification benchmark datasets have been selected to compare this method with the original BRELM implementation and other state-of-the-art algorithms. Particularly, 71 datasets for classification and 52 for regression, have been considered using different metrics and analysing different characteristics of the datasets, such as the size, the number of classes or the imbalanced nature of them. Statistical tests indicate the superiority of the proposed method in both regression and classification problems in all experimental scenarios. [ABSTRACT FROM AUTHOR]

Aerial image data are becoming more widely available, and analysis techniques based on supervised learning are advancing their use in a wide variety of remote sensing contexts. However, supervised learning requires training datasets which are not always available or easy to construct with aerial imagery. In this respect, unsupervised machine learning techniques present important advantages. This work presents a novel pipeline to demonstrate how available aerial imagery can be used to better the provision of services related to the built environment, using the case study of road traffic collisions (RTCs) across three cities in the UK. In this paper, we show how aerial imagery can be leveraged to extract latent features of the built environment from the purely visual representation of top-down images. With these latent image features in hand to represent the urban structure, this work then demonstrates how hazardous road segments can be clustered to provide a data-augmented aid for road safety experts to enhance their nuanced understanding of how and where different types of RTCs occur. [ABSTRACT FROM AUTHOR]

To ensure the safety and stability of the shield tunnel construction process, the ground settlement induced by the shield construction needs to be effectively predicted. In this paper, a prediction method combining empirical mode decomposition (EMD), chaotic adaptive sparrow search algorithm (CASSA), and extreme learning machine (ELM) is proposed. First, the EMD is used to decompose the settlement sequence into trend vectors and fluctuation vectors to fully extract the effective information of the sequence; Second, the sparrow search algorithm is improved by introducing Cubic chaotic mapping to initialize the population and adaptive factor to optimize the searcher's position formula, and the chaotic adaptive sparrow search algorithm is proposed; Finally, the CASSA-ELM prediction model is constructed by using CASSA to find the optimal values of weights and thresholds in the extreme learning machine. The fluctuation components and trend components decomposed by EMD are predicted one by one, and the prediction results are superimposed and reconstructed to obtain the predicted final settlement. Taking a shield interval in Jiangsu, China as an example, the meta-heuristic algorithm-optimized ELM model improves the prediction accuracy by 10.70% compared with the traditional ELM model. The combined EMD-CASSA-ELM prediction model can greatly improve the accuracy and speed of surface settlement prediction, and provide a new means for safety monitoring in shield tunnel construction. Intelligent prediction methods can predict surface subsidence more automatically and quickly, becoming a new development trend. [ABSTRACT FROM AUTHOR]

An ensemble of classifiers combines several single classifiers to deliver a final prediction or classification decision. An increasingly provoking question is whether such an ensemble can outperform the single best classifier. If so, what form of ensemble learning system (also known as multiple classifier learning systems) yields the most significant benefits in the size or diversity of the ensemble? In this paper, the ability of ensemble learning to predict and identify factors that influence or contribute to autism spectrum disorder therapy (ASDT) for intervention purposes is investigated. Given that most interventions are typically short-term in nature, henceforth, developing a robotic system that will provide the best outcome and measurement of ASDT therapy has never been so critical. In this paper, the performance of five single classifiers against several multiple classifier learning systems in exploring and predicting ASDT is investigated using a dataset of behavioural data and robot-enhanced therapy against standard human treatment based on 3000 sessions and 300 h, recorded from 61 autistic children. Experimental results show statistically significant differences in performance among the single classifiers for ASDT prediction with decision trees as the more accurate classifier. The results further show multiple classifier learning systems (MCLS) achieving better performance for ASDT prediction (especially those ensembles with three core classifiers). Additionally, the results show bagging and boosting ensemble learning as robust when predicting ASDT with multi-stage design as the most dominant architecture. It also appears that eye contact and social interaction are the most critical contributing factors to the ASDT problem among children., (© 2023. The Author(s).)

Security threats posed by Ponzi schemes present a considerably higher risk compared to many other online crimes. These fraudulent online businesses, including Ponzi schemes, have witnessed rapid growth and emerged as major threats in societies like Nigeria, particularly due to the high poverty rate. Many individuals have fallen victim to these scams, resulting in significant financial losses. Despite efforts to detect Ponzi schemes using various methods, including machine learning (ML), current techniques still face challenges, such as deficient datasets, reliance on transaction records, and limited accuracy. To address the negative impact of Ponzi schemes, this paper proposes a novel approach focusing on detecting Ponzi schemes on Ethereum using ML algorithms like random forest (RF), neural network (NN), and K-nearest neighbor (KNN). Over 20,000 datasets related to Ethereum transaction networks were gathered from Kaggle and preprocessed for training the ML models. After evaluating and comparing the three models, RF demonstrated the best performance with an accuracy of 0.94, a class-score of 0.8833, and an overall-score of 0.96667. Comparative evaluations with previous models indicate that our model achieves high accuracy. Moreover, this innovative work successfully detects key fraud features within the Ponzi scheme dataset, reducing the number of features from 70 to only 10 while maintaining a high level of accuracy. The main strength of this proposed method lies in its ability to detect clever Ponzi schemes from their inception, offering valuable insights to combat these financial threats effectively., (© 2023. The Author(s).)

In the recent JAVELIN Bladder 100 phase 3 trial, avelumab plus best supportive care significantly prolonged overall survival relative to best supportive care alone as first-line maintenance therapy following first-line platinum-based chemotherapy in patients with advanced urothelial cancer (aUC). Discovering biomarkers using genomic profiling to understand potential patient heterogeneity is essential to help improve patient care with precision medicine. For the JAVELIN Bladder 100 trial, it is unclear which variable selection methods can most reliably identify biomarkers to inform patient care because the dataset is characterized by high collinearity and low signal. The aim of this paper was to evaluate available selection methods and their ability to discover prognostic and predictive biomarkers in patients with aUC receiving first-line maintenance therapy. A simulation study evaluated the performance of popular variable selection approaches for high-dimensional data, including penalized regression models, random survival forests, and Bayesian variable selection methods. For Bayesian variable selection methods, a modified Bayesian Information Criterion (BIC) thresholding rule was proposed in addition to the traditional BIC thresholding rule. These methods were applied to the JAVELIN Bladder 100 dataset to investigate potential biomarkers associated with survival benefit. Results from the simulations demonstrated the strengths and limitations of the different methods. The variable selection methods demonstrated low false discovery rates under different conditions. However, their performance declined in the presence of high collinearity. Using the JAVELIN Bladder 100 data, we identified some potentially significant biomarkers across multiple models. Several lasso-related methods were able to identify potentially biologically meaningful variables in the trial. Some variable selection methods (such as stochastic search variable selection and random survival forest) may not be well suited to this type of data due to the presence of extreme collinearity and low signal. Future research should explore novel variable selection methods that may be more suitable for identifying prognostic and predictive biomarkers in this population.Trial registration: ClinicalTrials.gov Identifier: NCT02603432., (© 2023. The Author(s).)

Speech emotion recognition (SER) has gained an increased interest during the last decades as part of enriched affective computing. As a consequence, a variety of engineering approaches have been developed addressing the challenge of the SER problem, exploiting different features, learning algorithms, and datasets. In this paper, we propose the application of the graph theory for classifying emotionally-colored speech signals. Graph theory provides tools for extracting statistical as well as structural information from any time series. We propose to use the mentioned information as a novel feature set. Furthermore, we suggest setting a unique feature-based identity for each emotion belonging to each speaker. The emotion classification is performed by a Random Forest classifier in a Leave-One-Speaker-Out Cross Validation (LOSO-CV) scheme. The proposed method is compared with two state-of-the-art approaches involving well known hand-crafted features as well as deep learning architectures operating on mel-spectrograms. Experimental results on three datasets, EMODB (German, acted) and AESDD (Greek, acted), and DEMoS (Italian, in-the-wild), reveal that our proposed method outperforms the comparative methods in these datasets. Specifically, we observe an average UAR increase of almost 18 % , 8 % and 13 % , respectively. [ABSTRACT FROM AUTHOR]

A key challenge in quantum photonics today is the efficient and on-demand generation of high-quality single photons and entangled photon pairs. In this regard, one of the most promising types of emitters are semiconductor quantum dots, fluorescent nanostructures also described as artificial atoms. The main technological challenge in upscaling to an industrial level is the typically random spatial and spectral distribution in their growth. Furthermore, depending on the intended application, different requirements are imposed on a quantum dot, which are reflected in its spectral properties. Given that an in-depth suitability analysis is lengthy and costly, it is common practice to pre-select promising candidate quantum dots using their emission spectrum. Currently, this is done by hand. Therefore, to automate and expedite this process, in this paper, we propose a data-driven machine-learning-based method of evaluating the applicability of a semiconductor quantum dot as single photon source. For this, first, a minimally redundant, but maximally relevant feature representation for quantum dot emission spectra is derived by combining conventional spectral analysis with an autoencoding convolutional neural network. The obtained feature vector is subsequently used as input to a neural network regression model, which is specifically designed to not only return a rating score, gauging the technical suitability of a quantum dot, but also a measure of confidence for its evaluation. For training and testing, a large dataset of self-assembled InAs/GaAs semiconductor quantum dot emission spectra is used, partially labelled by a team of experts in the field. Overall, highly convincing results are achieved, as quantum dots are reliably evaluated correctly. Note, that the presented methodology can account for different spectral requirements and is applicable regardless of the underlying photonic structure, fabrication method and material composition. We therefore consider it the first step towards a fully integrated evaluation framework for quantum dots, proving the use of machine learning beneficial in the advancement of future quantum technologies. [ABSTRACT FROM AUTHOR]

Concrete-filled steel tubular (CFST) columns have extensive applications in structural engineering due to their exceptional load-bearing capability and ductility. However, existing design code standards often yield different design capacities for the same column properties, introducing uncertainty for engineering designers. Moreover, conventional regression analysis fails to accurately predict the intricate relationship between column properties and compressive strength. To address these issues, this study proposes the use of two machine learning (ML) models—Gaussian process regression (GPR) and symbolic regression (SR). These models accept a variety of input variables, encompassing geometric and material properties of stub CFST columns, to estimate their strength. An experimental database of 1316 specimens was compiled from various research papers, including circular, rectangular, and double-skin stub CFST columns. In addition, a dimensionless output variable, referred to as the strength index, is introduced to enhance model performance. To validate the efficiency of the introduced models, predictions from these models are compared with those from two established standard codes and various ML algorithms, including support vector regression optimized with particle swarm optimization (PSVR), artificial neural networks, XGBoost (XGB), CatBoost (CATB), Random Forest, and LightGBM models. Through performance metrics, the CATB, GPR, PSVR and XGB models emerge as the most accurate and reliable models from the evaluation results. In addition, simple and practical design equations for the different types of CFST columns have been proposed based on the SR model. The developed ML models and proposed equations can predict the compressive strength of stub CFST columns with reliable and accurate results, making them valuable tools for structural engineering. Furthermore, the Shapley additive interpretation (SHAP) technique is employed for feature analysis. The results of the feature analysis reveal that section slenderness ratio and concrete strength parameters negatively impact the compressive strength index. [ABSTRACT FROM AUTHOR]

This paper focuses on the feasibility of deep neural operator network (DeepONet) as a robust surrogate modeling method within the context of digital twin (DT) enabling technology for nuclear energy systems. Machine learning (ML)-based prediction algorithms that need extensive retraining for new reactor operational conditions may prohibit real-time inference for DT across varying scenarios. In this study, DeepONet is trained with possible operational conditions and that relaxes the requirement of continuous retraining - making it suitable for online and real-time prediction components for DT. Through benchmarking and evaluation, DeepONet exhibits remarkable prediction accuracy and speed, outperforming traditional ML methods, making it a suitable algorithm for real-time DT inference in solving a challenging particle transport problem. DeepONet also exhibits generalizability and computational efficiency as an efficient surrogate tool for DT component. However, the application of DeepONet reveals challenges related to optimal sensor placement and model evaluation, critical aspects of real-world DT implementation. Addressing these challenges will further enhance the method's practicality and reliability. Overall, this study marks an important step towards harnessing the power of DeepONet surrogate modeling for real-time inference capability within the context of DT enabling technology for nuclear systems. [ABSTRACT FROM AUTHOR]

This paper proposes DQ-RTS, a novel decentralized Multi-Agent Reinforcement Learning algorithm designed to address challenges posed by non-ideal communication and a varying number of agents in distributed environments. DQ-RTS incorporates an optimized communication protocol to mitigate data loss between agents. A comparative analysis between DQ-RTS and its decentralized counterpart Q-RTS, or Q-learning for Real-Time Swarms, demonstrates the superior convergence speed of DQ-RTS, achieving a remarkable speed-up factor ranging from 1.6 to 2.7 in scenarios with non-ideal communication. Moreover, DQ-RTS exhibits robustness by maintaining performance even when the agent population fluctuates, making it well-suited for applications requiring adaptable agent numbers over time. Additionally, extensive experiments conducted on various benchmark tasks validate the scalability and effectiveness of DQ-RTS, further establishing its potential as a practical solution for resilient Multi-Agent Reinforcement Learning in dynamic distributed environments. [ABSTRACT FROM AUTHOR]

Modern web application development involves handling enormous amounts of sensitive and consequential data. Security is, therefore, a crucial component of developing web applications. A web application's security is concerned with safeguarding the data it processes. The web application framework must have safeguards to stop and find application vulnerabilities. Among all web application attacks, SQL injection and XSS attacks are common, which may lead to severe damage to Web application data or web functionalities. Currently, there are many solutions provided by various study for SQLi and XSS attack detection, but most of the work shown have used either SQL/XSS payload-based detection or HTTP request-based detection. Few solutions available can detect SQLi and XSS attacks, but these methods provide very high false positive rates, and the accuracy of these models can further be improved. We proposed a novel approach for securing web applications from both cross-site scripting attacks and SQL injection attacks using decoding and standardization of SQL and XSS payloads and HTTP requests and trained our model using hybrid deep learning networks in this paper. The proposed hybrid DL model combines the strengths of CNNs in extracting features from input data and LSTMs in capturing temporal dependencies in sequential data. The soundness of our approach lies in the use of deep learning techniques that can identify subtle patterns in the data that traditional machine learning-based methods might miss. We have created a testbed dataset of Normal and SQLi/XSS HTTP requests and evaluated the performance of our model on this dataset. We have also trained and evaluated the proposed model on the Benchmark dataset HTTP CSIC 2010 and another SQL/XSS payload dataset. The experimental findings show that our proposed approach effectively identifies these attacks with high accuracy and a low percentage of false positives. Additionally, our model performed better than traditional machine learning-based methods. This soundness approach can be applied to various network security applications such as intrusion detection systems and web application firewalls. Using our model, we achieved an accuracy of 99.84%, 99.23% and 99.77% on the SQL-XSS Payload dataset, Testbed dataset and HTTP CSIC 2010 dataset, respectively. [ABSTRACT FROM AUTHOR]

Wildlife roadkill is a recurring, dangerous problem that affects both humans and animals and has received increasing attention from environmentalists worldwide. Addressing this problem is difficult due to the high investments required in road infrastructure to effectively reduce wildlife vehicle collisions. Despite recent applications of machine learning techniques in low-cost and economically viable detection systems, e.g., for alerting drivers about the presence of animals and collecting statistics on endangered animal species, the success and wide adoption of these systems depend heavily on the availability of data for system training. The lack of training data negatively impacts the feature extraction of machine learning models, which is crucial for successful animal detection and classification. In this paper, we evaluate the performance of several state-of-the-art object detection models on limited data for model training. The selected models are based on the YOLO architecture, which is well-suited for and commonly used in real-time object detection. These include the YoloV4, Scaled-YoloV4, YoloV5, YoloR, YoloX, and YoloV7 models. We focus on Brazilian endangered animal species and use the BRA-Dataset for model training. We also assess the effectiveness of data augmentation and transfer learning techniques in our evaluation. The models are compared using summary metrics such as precision, recall, mAP, and FPS and are qualitatively analyzed considering classic computer vision problems. The results show that the architecture with the best results against false negatives is Scaled-YoloV4, while the best FPS detection score is the nano version of YoloV5. [ABSTRACT FROM AUTHOR]

Sound is one of the primary forms of sensory information that we use to perceive our surroundings. Usually, a sound event is a sequence of an audio clip obtained from an action. The action can be rhythm patterns, music genre, people speaking for a few seconds, etc. The sound event classification address distinguishes what kind of audio clip it is from the given audio sequence. Nowadays, it is a common issue to solve in the following pipeline: audio pre-processing→perceptual feature extraction→classification algorithm. In this paper, we improve the traditional sound event classification algorithm to identify unknown sound events by using the deep learning method. The compact cluster structure in the feature space for known classes helps recognize unknown classes by allowing large room to locate unknown samples in the embedded feature space. Based on this concept, we applied center loss and supervised contrastive loss to optimize the model. The center loss tries to minimize the intra- class distance by pulling the embedded feature into the cluster center, while the contrastive loss disperses the inter-class features from one another. In addition, we explored the performance of self-supervised learning in detecting unknown sound events. The experimental results demonstrate that our proposed open-set sound event classification algorithm and self-supervised learning approach achieve sustained performance improvements in various datasets. [ABSTRACT FROM AUTHOR]

Predictive sports data analytics can be revolutionary for sports performance. Existing literature discusses players' or teams' performance, independently or in tandem. Using Machine Learning (ML), this paper aims to holistically evaluate player-, team-, and conference (season)-level performances in Division-1 Women's basketball. The players were monitored and tested through a full competitive year. The performance was quantified at the player level using the reactive strength index modified (RSImod), at the team level by the game score (GS) metric, and finally at the conference level through Player Efficiency Rating (PER). The data includes parameters from training, subjective stress, sleep, and recovery (WHOOP straps), in-game statistics (Polar monitors), and countermovement jumps. We used data balancing techniques and an Extreme Gradient Boosting (XGB) classifier to predict RSI and GS with greater than 90% accuracy and a 0.9 F1 score. The XGB regressor predicted PER with an MSE of 0.026 and an R2 of 0.680. Ensemble of Random Forest, XGB, and correlation finds feature importance at all levels. We used Partial Dependence Plots to understand the impact of each feature on the target variable. Quantifying and predicting performance at all levels will allow coaches to monitor athlete readiness and help improve training. [ABSTRACT FROM AUTHOR]