Search

Renewable microgrids enhance security, reliability, and power quality in power systems by integrating solar and wind sources, reducing greenhouse gas emissions. This paper proposes a machine learning approach, leveraging Gaussian Process (GP) and Krill Herd Algorithm (KHA), for energy management in renewable microgrids with a reconfigurable structure based on remote switching of tie and sectionalizing. The method utilizes Gaussian Process (GP) for modeling hybrid electric vehicle (HEV) charging demand. To counteract HEV charging effects, two scenarios are explored: coordinated and intelligent charging. A novel optimization method inspired by the Krill Herd Algorithm (KHA) is introduced for the complex problem, along with a self-adaptive modification to tailor solutions to specific situations. Simulation on an IEEE microgrid demonstrates efficiency in both scenarios. The predictive model yields a remarkably low Mean Absolute Percentage Error (MAPE) of 1.02381 for total HEV charging demand. Results also reveal a reduction in microgrid operation cost in the intelligent charging scenario compared to coordinated charging. [ABSTRACT FROM AUTHOR]

Our understanding of the environmental and occupational health implications of pollutants emitted in steel production is still lacking, despite the considerable amount of research devoted to this topic. Given the significance of steel recycling and the need to reduce greenhouse gas emissions, many steel factories are adopting electric arc furnace (EAF) technology. The use of a technological system designed for the capture of pollutants emitted through EAF steel production is highly ecological because of its utilization of iron scrap and low investment cost. Despite this, the main issue with the EAF is the environmental impact it poses, specifically the release of pollutants into the air, such as dust and organic substances, chlorinated dioxins and furans, dioxin-like polychlorinated biphenyls and brominated dioxins and furans. As a result, workers in this field have a considerable rate of morbidity. The main challenge for EAFs is to optimize the capture of powders produced during the techno-logical process, both from the EAF and the workplace. A state-of-the art solution for managing pollutants in modern steel manufacturing is highlighted in this paper, featuring a method used in Romania that employs the Best Available Techniques (BAT) reference document for iron and steel production to directly collect pollutants from the EAF. The system included a cylindrical fitting, a heat exchanger to cool the gases and a hood to collect contaminants. In comparison to other ventilation options, this equipment boasts lower investment and lower operational costs because of its effective and minimal air flow. Through the use of cutting-edge technology and progressive strategies, we can move closer toward our objective of a workplace free from injuries in the steel industry. [ABSTRACT FROM AUTHOR]

A substantial level of significance has been placed on renewable energy systems, especially photovoltaic (PV) systems, given the urgent global apprehensions regarding climate change and the need to cut carbon emissions. One of the main concerns in the field of PV is the ability to track power effectively over a range of factors. In the context of solar power extraction, this research paper performs a thorough comparative examination of ten controllers, including both conventional maximum power point tracking (MPPT) controllers and artificial intelligence (AI) controllers. Various factors, such as voltage, current, power, weather dependence, cost, complexity, response time, periodic tuning, stability, partial shading, and accuracy, are all intended to be evaluated by the study. It is aimed to provide insight into how well each controller performs in various circumstances by carefully examining these broad parameters. The main goal is to identify and recommend the best controller based on their performance. It is notified that, conventional techniques like INC, P&O, INC-PSO, P&O-PSO, achieved accuracies of 94.3, 97.6, 98.4, 99.6 respectively while AI based techniques Fuzzy-PSO, ANN, ANFIS, ANN-PSO, PSO, and FLC achieved accuracies of 98.6, 98, 98.6, 98.8, 98.2, 98 respectively. The results of this study add significantly to our knowledge of the applicability and effectiveness of both AI and traditional MPPT controllers, which will help the solar industry make well-informed choices when implementing solar energy systems. [ABSTRACT FROM AUTHOR]

Rapid placement of electric vehicle charging stations (EVCSs) is essential for the transportation industry in response to the growing electric vehicle (EV) fleet. The widespread usage of EVs is an essential strategy for reducing greenhouse gas emissions from traditional vehicles. The focus of this study is the challenge of smoothly integrating Plug-in EV Charging Stations (PEVCS) into distribution networks, especially when distributed photovoltaic (PV) systems are involved. A hybrid Genetic Algorithm and Simulated Annealing method (GA-SAA) are used in the research to strategically find the optimal locations for PEVCS in order to overcome this integration difficulty. This paper investigates PV system situations, presenting the problem as a multicriteria task with two primary objectives: reducing power losses and maintaining acceptable voltage levels. By optimizing the placement of EVCS and balancing their integration with distributed generation, this approach enhances the sustainability and reliability of distribution networks. [ABSTRACT FROM AUTHOR]

Digital transformation and green innovation are powerful initiatives to achieve carbon peaking, carbon neutrality targets and high-quality economic development. Using a sample of high energy-consuming listed enterprises from 2012 to 2021, a double fixed-effect model is constructed to verify the effect of green innovation on the carbon emission reduction performance of high energy-consuming enterprises, and digital transformation is used as a moderating variable to analyze the inner mechanism of green innovation affecting the carbon emission reduction performance of high energy-consuming enterprises under the effect of digital transformation. The empirical results show that green innovation can significantly improve the carbon emission reduction performance of energy-consuming enterprises, while digital transformation positively moderates the effect of green innovation on the carbon emission reduction performance of energy-consuming enterprises. When considering the industry heterogeneity, the moderation effect of digital transformation is significant in the chemical raw materials and chemical products manufacturing industry and the electricity and heat production and supply industry, but the petroleum processing and coking and nuclear fuel processing industry, the non-metallic mineral products industry, the ferrous metal smelting and rolling processing industry and the non-ferrous metal smelting and rolling processing industry are not yet significantly affected by green innovation and digital transformation. The findings of the study provide empirical evidence to promote the improvement of carbon emission reduction performance of energy-intensive enterprises in China and to achieve the "double carbon" target. [ABSTRACT FROM AUTHOR]

Climate change (CC) will likely significantly impact the world's infrastructure significantly. Rising temperatures, increased precipitation, and rising sea levels are all likely to stress critical infrastructures (CI). Rising temperatures can lead to infrastructure damage from extreme heat events. This can cause roads and bridges to buckle or crack, leading to costly repairs and potential traffic disruptions. In addition, heat waves can damage vital electrical infrastructure, leading to widespread power outages. In light of this context, this article reports on a study which examined the connections and impacts of CC on infrastructure. The study employed a mixed-method approach, combining bibliometric analysis for the period 1997–2022 with a series of relevant case studies from the five continents to offer insight into the impact of CC on infrastructure. The article fills a research gap in respect of assessments of the extent to which climate change (CC) negative influences the infrastructure, with a special focus on developing countries. It also showcases CI projects and adaptation measures being currently deployed, to address CC. The results show that the current infrastructure is vulnerable to CC. The selected case studies on CI adaptation show that in developing and industrialised countries, there is a perceived need to understand better the connections and potential impacts of CC on critical areas such as transport, settlements, and coastal infrastructure. In order to protect infrastructure from CC impacts, governments need to invest in measures such as flood control, early warning systems, and improved building codes. Additionally, they need to work to reduce greenhouse gas emissions more actively, which are the primary cause of CC. [ABSTRACT FROM AUTHOR]

With its high energy consumption and pollutant emissions, the iron and steel industry is a significant source of air pollution and carbon emissions in the Beijing–Tianjin–Hebei (BTH) region. To improve air quality and reduce greenhouse gas emissions, a series of policies involving ultra-low emission, synergistic reduction of pollution, and carbon application have been implemented in the region. This study has assessed air pollutant and CO2 emission patterns in the iron and steel industry of the region by employing co-control effects coordinate system, marginal abatement cost curve, and numerical modeling, along with the synergistic benefits of typical technologies. The results have demonstrated that: (1) the intensive production activities pertinent to iron and steel enterprises has contributed greatly to the emission in Tangshan and Handan, where the sintering process is the main source of SO2, NOx, PM2.5, and CO, accounting for 64.86%, 55.15%, 29.98%, and 46.43% of the total emissions, respectively. (2) Among the typical pollution control and reduction measures, industrial restructuring and adjustment of the energy-resource structure have led to the greatest effects on emission reduction. Technologies exhibiting great potential in emission reduction and high-cost efficiency such as Blast Furnace Top Gas Recovery Turbine Unit (TRT) need to be promoted. (3) In Tangshan city with the highest level of steel production, the iron and steel production activities contributed to the concentration of 30.51% of PM2.5, 50.67% of SO2, and 42.54% of NO2 during the non-heating period. During the heating period, pollutants pertinent to the combustion of fossil energy for heating have increased, while iron and steel induced emissions have decreased to 23.7%, 34.32%, and 29.13%, respectively. By 2030, it is speculated that the contribution of the iron and steel industry to air quality will be significantly decreased as result of successful implementation of ultra-low emission policies and typical synergistic reduction technologies. [ABSTRACT FROM AUTHOR]

It is crucial to optimize energy consumption in buildings while considering thermal comfort. The first step here involved an EnergyPlus simulation on a trade center building located in Tehran, Bandar Abbas, and Tabriz, Iran. A multi-objective optimization was then performed based on non-dominated sorting genetic algorithm II (NSGA-II) in jEPlus + EA to establish the building in the selected city where would benefit the most from implementing the radiant ceiling cooling system. Efforts were undertaken to choose environmentally-friendly materials. The final solution by Pareto charts resulted in a 52% reduction in energy consumption, a 37.3% decrease in cooling load, and a 17.4% improvement in comfort hours compared to the original design. Annual emission of greenhouse gas reduced as 167.67 tone of CO2 equivalent emission, 25.77 ton of CH4, and 0.2 ton of NO2. The mentioned algorithm was conducted for the first time on a trade center, including a DOAS system and radiant ceiling cooling system. Simultaneously, the environmental-friendly materials were dealt with. The procedure holds significant relevance for the design and optimization of buildings in Iran, especially wherever the climate is hot and humid. This approach offers advantages to the environment by reducing the impact on energy resources and utilizing environmentally-friendly materials. [ABSTRACT FROM AUTHOR]

Gas injection is a well-known method for enhancing oil recovery (EOR). The utilization of greenhouse gases, such as carbon dioxide (CO2) or flue gas, offers the dual advantage of reducing greenhouse gas emissions while potentially enhancing the sweep efficiency in oil recovery. Nevertheless, one of the notable challenges encountered when using these gases is the precipitation and deposition of asphaltenes, leading to formation damage and a decrease in reservoir permeability, particularly in the case of light oil reservoirs. In this study, CO2 and flue gas were injected into an elongated core sample comprising four individual core plugs under reservoir conditions to displace the light live oil. The recovery factor and asphaltene deposition along the core holder were assessed and compared as two crucial parameters within the gas injection scenario. Our results indicate a significantly higher recovery factor of 86% achieved with CO2 injection compared to 36% with flue gas injection, attributable to differences in their interfacial tension and miscibility. However, the CO2 injection method exhibits more pronounced formation damage. Individual assessment of each core plug reveals that permeability impairment is most acute in the initial two core plugs, situated closer to the injection face of the extended core. These findings enhance our understanding of the mechanisms contributing to permeability impairment resulting from asphaltene deposition during CO2 and flue gas injection for EOR. [ABSTRACT FROM AUTHOR]

Obesity is a growing issue worldwide, whose causes and consequences are linked to the environment and which therefore has a high carbon footprint. On the other hand, obesity surgery, along with other procedures in surgical suites, entails environmental consequences and responsibilities. We conducted a prospective comparative study on two groups of bariatric interventions (N = 59 and 56, respectively) during two consecutive periods of time (Oct 2021–March 2022), first without and then with specific measures aimed at reducing greenhouse gas emissions related to bariatric procedures by approximately 18%. These measures included recycling of disposable surgical equipment, minimizing its use, and curbing anesthetic gas emissions. Further and continuous efforts/incentives are warranted, including reframing the surgical strategies. Instead of comparing measurements, which is difficult at the present time, we suggest defining an ECO-SCORE in operating rooms, among other healthcare facilities. [ABSTRACT FROM AUTHOR]