Search

Crude oil that is inadvertently spilled in the marine environment can interact with suspended sediment to form oil-mineral aggregates (OMA). Researchers have identified OMA formation as a natural method of oil dispersion, and have sought ways to enhance this process for oil spill remediation. Currently there is a lack of understanding of how the weathering of oil will affect the formation of OMA due to a lack of published data on this relationship. Based on literature, we identified two conflicting hypotheses: OMA formation 1) increases with weathering as a result of increased asphaltene and polar compound content; or 2) decreases with weathering as a result of increased viscosity. While it is indeed true that the viscosity and the relative amount of polar compounds will increase with weathering, their net effects on OMA formation is unclear. Controlled laboratory experiments were carried out to systematically test these two conflicting hypotheses. Experimental results using light, intermediate, and heavy crude oils, each at five weathering stages, show a decrease in OMA formation as oil weathers. [ABSTRACT FROM AUTHOR]

Abstract: Oil–suspended particulate matter aggregation (OSA) has been recognized by the oil spill remediation community to effectively enhance the cleansing of spilled oil in the marine environment. While studies have investigated the application of mineral fines as an effective method to facilitate oil dispersion, decision-makers still lack information on the role of mixing energy in OSA formation and its significance to oil dispersion in real spills. This work studied the effect of level and duration of mixing energy on OSA formation using the standard reference material 1941b and Arabian light crude oil. The results showed that dispersed small oil droplets increased with an increase of both the level and duration of mixing energy to form multi-droplet OSAs. The sizes of the dispersed droplets varied between 5 and 10μm under different conditions studied. The maximum oil trapping efficiency increased from 23% to 33%, the oil to sediment ratio increased from 0.30 to 0.43goil/g sediment, and the required shaking time decreased from 2.3 to 1.1h as the shaking rate increased from 2.0 to 2.3Hz. Based on the size measurement results, a breakage effect on the formed OSAs and sediment flocs was confirmed under high mixing energy level. [Copyright &y& Elsevier]