Search

This paper presents a study on the stability of a mine entry of an innovative approach to non-pillar coal mining—gob-side entry retaining using cantilever beam theory (GERMC). This method is on the rise in China and it has shown to increase the coal seam rate of recycling and mining productivity. The method utilizes the caved-in material resulting from the mining activities to fill the gob area and ensure the stability of the roof of the already mined area. The caved-in material will form the gob-side wall of the retained entry. This characteristic is unique to this method. Thus, there are not many studies that analyze the stability of the filling material and of the gob-side entry wall under these circumstances, which is a vital element for the safety of the mining operations. This paper studies the stability of the gob-side retained entry of the Hongjingta underground coal mine in China. The authors perform the analysis using a discrete fracture network (DFN) model developed by the Massachusetts Institute of Technology (MIT), GEOFRAC, in combination with the discrete-element method (DEM) software UDEC. GEOFRAC estimates the rock blocks (fracture networks) in the filling body, from fracture traces measured along the gob-side wall of the entry. Statistical methods are used to estimate the fracture intensity and the mean fracture areas, which are inputs to the DFN. The generated fracture networks are then inputted into the DEM code, UDEC, to evaluate the stability of the mine-retained entry. For this study, we developed two types of models in UDEC, one considering the fractures generated by the DFN model and another considering the gob-filling material as a continuum. This methodology—combined DFN–DEM—is unique and provides a more realistic representation of the gob-filling material by considering the fractures in the filling body and by estimating those fractures (interfaces between rock blocks) using field data. In addition to this, we also considered the effects of uncertainties that are associated with estimating three-dimensional (3-D) fractures' networks/rock blocks from two-dimensional (2-D) field data. Finally, the results of the simulations were compared with the measurements from the mine and are in good agreement. [ABSTRACT FROM AUTHOR]

Splitting failure, which is recognized as a special engineering geology phenomenon, occurs continually in the brittle rock mass of caverns during underground excavation. In this paper, a splitting model of linear slippage crack groups is built with fracture mechanics, energy analysis, and crack extension theories. Considering intrinsic cracks in rock mass and change of outer stress, intrinsic cracks propagate into macroscopical splitting cracks that are approximately parallel to the side wall of caverns. The splitting criterion of cavern rock mass and the method for predicting displacement in view of splitting opening displacement are proposed. In the end, the forecasting method is applied to the Jinping-I Hydropower Station, underground caverns engineering in China, the splitting failure zone and forecasting displacement are accordant with the monitoring data. The new forecasting displacement method is proven to contribute to the construction of similar underground caverns. [ABSTRACT FROM AUTHOR]

By taking into account the rheological behavior of the rock mass, the creep failure of a roof stratum seated on pillars in mined-out area is analyzed through a newly developed visco-elastic model. The time-dependent deflection of the roof stratum is obtained by numerical inversion of Laplace transform. The study shows that when creep properties of both the pillars and roof stratum are considered, the expected deflection in the roof stratum increases with time. Consequently, the roof would fail when the critical tensile stress is reached as the result of the increased deflection. To demonstrate the present analytical procedure, the failure time of roof stratum of the Xingtai Gypsum Mine in China was estimated, and the results obtained agreed with the observation. The case study indicates that the analytic approach provides a new way to assess the potential impact of the time-dependence of the roof stratum deformation and is useful in predicting its stability above a mined-out area. [ABSTRACT FROM AUTHOR]