Search

The Lunar Environment heliospheric X-ray Imager (LEXI) is an instrument built to image x-rays from solar wind charge exchange in Earth's magnetosheath. Monitoring the position of the magnetopause at the inner boundary of the magnetosheath allows us to understand how magnetic reconnection regulates how energy from the solar wind is deposited into Earth's magnetosphere. LEXI is part of an upcoming lunar lander mission set to land in Mare Crisium. To repel unwanted charged particles, the instrument carries a permanent magnet array composed of 48 neodymium magnets. The array was designed to maximize charged particle deflection while minimizing stray magnetic fields, which could impact other instruments or spacecraft operation. A Runge-Kutta-based fully kinetic particle tracing model was created to evaluate the effectiveness of LEXI's unique charged particle deflector array. Combined with the other particle suppression measures of the instrument, including physical structures and filters, the simulations show proton and electron transmission to the LEXI detector is expected to be sufficiently reduced to allow successful imaging. The flexible simulation model can be generalized to be used in examining the magnetic deflector array effectiveness of other instruments whose signals could be compromised by unwanted charged particle contamination., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).)

We present a portable polarimeter capable of real-time visualization of partial and fully polarized light over a broad band of wavelengths. Our system utilizes a Raspberry Pi computer with a low-cost data acquisition "HAT" and an integrated photodetection circuit. Wide bandwidth operation is achieved through digital calibration of an arbitrary retardance waveplate presented herein. All mechanical, electrical, and software components are open source and available on a GitHub repository. This completely integrated approach provides an efficient tool for modern optics research laboratories and is well-suited for educational demonstrations., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

We present a simple and easy-to-implement Graphics Processing Unit (GPU)-accelerated routine to numerically simulate the propagation of ultrashort and intense laser pulses as they interact with a medium. The routine is based on the solution of Maxwell's wave equation in the frequency domain with an extended Crank-Nicolson algorithm implemented in the Nvidia CUDA C++ programming language. The main advantages of our method are its significant speed-up factor and its ease of implementation, requiring only basic knowledge of CUDA and C++. In this article, we review the strong-field wave equations to be solved and their discretization and demonstrate how to implement a numerical solver for them on an Nvidia GPU. We show the results of the simulation of a near-infrared laser pulse propagating through a partially ionized atomic gas and discuss the performance of our GPU-accelerated scheme. Compared to a naïve central processing unit implementation of the same routine, our GPU-accelerated version is up to 198 times faster in standard regimes., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

Comet 67P/Churyumov-Gerasimenko (hereafter 67P) was the primary target of ESA's Rosetta mission. Hyperspectral images acquired by the Mapping channel of the Visible and InfraRed Thermal Imaging Spectrometer aboard Rosetta can be used to derive physical and compositional surface properties by detailed spectrophotometric analyses. This calls for a precise spatial co-registration between measurements and geometry information. In this work, we improve the wavelength-dependent co-registration and also the spatial consistency of the radiometric calibration. This is accomplished by applying a feature-based image matching method comparing measured 67P nucleus images from the entire mission to corresponding photometric simulations. The derived geometric distortions suggest previously unaccounted optical aberrations of the instrument, in conjunction with non-systematic spacecraft pointing and perspective errors, and discrepancies between the true nucleus shape at data acquisition time and the used digital shape model., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).)

We present a magneto-optical Kerr effect (MOKE) spectrometer based on a modified Martin-Puplett interferometer, utilizing continuous wave sub-THz low-power radiation in a broad frequency range. This spectrometer is capable of measuring the frequency dependence of the MOKE response function, both the Kerr rotation and ellipticity, simultaneously, with accuracy limited by a sub-milliradian threshold, without the need for a reference measurement. The instrument's versatility allows it to be coupled to a cryostat with optical windows, enabling studies of a variety of quantum materials such as unconventional superconductors, two-dimensional electron gas systems, quantum magnets, and other systems showing optical Hall response at sub-Kelvin temperatures and in high magnetic fields. We demonstrate the functionality of the MOKE spectrometer using an undoped InSb wafer as a test sample., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

The ongoing improvement in laser technology and target fabrication is opening new possibilities for diagnostic development. An example is x-ray phase-contrast imaging (XPCI), which serves as an advanced x-ray imaging diagnostic in laser-driven experiments. In this work, we present the results of the XPCI platform that was developed at the OMEGA EP Laser-Facility to study multi-Mbar single and double shocks produced using a kilojoule laser driver. Two-dimensional radiation-hydrodynamic simulations agree well with the shock progression and the spherical curvature of the shock fronts. It is demonstrated that XPCI is an excellent method to determine with high accuracy the front position of a trailing shock wave propagating through an expanding CH plasma that was heated by a precursor Mbar shock wave. The interaction between the rarefaction wave and the shock wave results in a clear signature in the radiograph that is well reproduced by radiation-hydrodynamic simulations., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

The fixed-frequency and frequency-modulated continuous-wave (FM-CW) reflectometers on LTX-β (Lithium Tokamak eXperiment-β) have been configured to use the same transmission lines and antenna arrays for coincident views of the core and edge plasma. The fixed-frequency channels (13.1-20.5 and 20-40 GHz, tunable between discharges) provide time-resolved measurements of density fluctuations, while the FM-CW channels (13.1-20.2 and 19.5-33.5 GHz) measure the density profile and fluctuations, with high spatial resolution and a sampling rate determined by the frequency sweep interval (5 μs). Data from both reflectometers are synchronously acquired to simultaneously leverage the wide bandwidth and high spatial resolution of the respective systems. Experiments showed that mutual crosstalk interference is momentary and does not diminish the capability of either system. Spectral analysis indicated broad power spectra (several hundreds of kHz) and suggests that the signals from the FM-CW system are consistent with under-sampled fixed-frequency signals. Radial correlations were explored using data from the two reflectometers, as well as from the FM-CW system alone. The core channels showed high levels of agreement between these two comparisons, suggesting that the data from the reflectometers are interchangeable for statistical estimates. For the edge channels, comparisons using data from the FM-CW reflectometer alone showed significant decorrelation due to time lag caused by the finite frequency up-sweep duration. Alternatively, this effect is eliminated when cross-correlating data from the different reflectometers. These results highlight the advantages of operating the fixed-frequency and FM-CW reflectometers in this manner, where the combined system can overcome the limitations of each separate system., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Space gravitational wave detection requires establishing laser links between distributed spacecraft for interferometry. Inter-satellite laser link acquisition is an essential step in this process. Considering the spacecraft's miniaturization and reliability, a bidirectional scanning acquisition method is proposed using only field emission electric propulsion and quadrant photodetector. This method does not require additional acquisition sensors and actuators. To improve efficiency while ensuring the acquisition success rate, a constant angular velocity Archimedean spiral scanning guidance law is proposed, and the critical parameters that influence acquisition time and success rate are analyzed. Monte Carlo simulations show that the method can ensure an acquisition success rate of over 90%. Compared with constant linear velocity Archimedean spiral scanning, this method can reduce the acquisition time required to achieve the same success rate by 15%., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

As new alloys are being developed for additive manufacturing (AM) applications, questions related to the temperature-dependent structural and compositional stability of these alloys remain. In this work, the benefits and limitations of a unique method for testing this stability are presented. This system employs the use of polychromatic synchrotron light to perform energy-dispersive x-ray diffraction (ED-XRD) on an electrostatically levitated sample at high temperatures. In comparison with a traditional angular-dispersive setup, the container-less electrostatic levitation method has unique advantages, including quicker acquisition times, simultaneous compositional information through fluorescence emissions, a reduction in background noise, and, importantly, concurrent/subsequent measurement of thermophysical properties. This combined method is ideal for phase transition studies by holding the levitated sample at a stable position and temperature through controlled heating and temperature management. To illustrate these capabilities, we show ED-XRD data of the well-known martensitic phase transition (hcp to bcc) in Ti-6Al-4V. In addition, results from the novel alloy Ni51Cu44Cr5 are presented. This alloy is shown to maintain an fcc structure upon heating. However, the concentration of Cu is reduced at high temperatures, resulting in a decrease in the lattice constant. As concurrent thermophysical properties are probed, these preliminary structure and composition experiments demonstrate the capabilities of this technique to determine the composition-processing-structure-properties of metal alloys for AM., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

We report the development of a space-compatible packaging system for an integrated monolithic ultra-stable optical reference toward China's next-generation geodesy mission with low orbit satellite-to-satellite tracking. Building on our previous work, we optimized the mounting structure and thermal insulation mechanism using the finite element method. The comprehensive simulation results demonstrated the robustness of the entire packaging system with enough margins to withstand severe launch loads and maintain an ultra-high geometric cavity length stability. A long-term prediction of the vacuum maintenance around the cavity during in-orbit operation was conducted. An engineering prototype, within which an integrated monolithic optical reference has been mounted, was built based on our optimized design, and it has successfully passed typical aerospace environmental tests, including sinusoidal vibration (∼10 g, 10-100 Hz), random vibration (∼0.045 g2/Hz, 10-2000 Hz), and thermal cycling (0-45, 3 °C/min, lasting for 90 h). The experimental thermal time constant of the prototype exceeded 9.5 × 104 s, enabling a temperature stability of 1.1 × 10-6 K/Hz1/2 at 10 mHz on the optical cavity, with external active temperature control. The design is also suitable and useful for laboratory and terrestrial applications., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).)

The Mapping channel of the Visible and InfraRed Thermal Imaging Spectrometer (VIRTIS-M) aboard Rosetta acquired many hyperspectral images of comet 67P/Churyumov-Gerasimenko (hereafter 67P). The VIS channel detector responsivity was dependent on the VIS detector temperature (TVIS). This affects the absolute values of the measured spectra (for a TVIS increase of 1 K between 0.06% increase at 0.55 μm and 1.2% increase at 1 μm) and the spectral slopes. Here, we derive a simple parameterization of this CCD-typical effect based on a statistical analysis of the TVIS-related bias of the measurements. At this, we include all measured VIS spectra excluding acquisitions with little nucleus surface information or at opposition geometry, thereby achieving a high statistical significance and representativity. The corresponding VIS detector responsivity correction, slightly different for measurements acquired when the IR cryocooler was off or on, makes the spectra measured at different instrument temperatures consistent over the entire Rosetta mission phase at 67P. This will improve future quantitative analyses of the data., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).)

Rheological characteristics exhibit significant variations at nanoscale confinement or near interfaces, compared to bulk rheological properties. To bridge the gap between nano- and bulk-scale rheology, allowing for a better and holistic understanding of rheology, developing a single experimental platform that provides rheological measurements across different scales, from nano to bulk, is desirable. Here, we present the novel methodology for multiscale rheology using a highly sensitive atomic force microscope based on a quartz tuning fork (QTF) force sensor. We employ microscale and nanoscale shear probes attached to the QTF, oscillating parallel to a substrate surface for rheological measurements as a function of the tip-substrate distance with sub-nanometer resolution. Silicone oils with viscosities ranging from 5 cSt to 10 000 cSt are used as calibration samples, and we have successfully derived the bulk rheological moduli. Furthermore, an increase in modulus is observed within the regime of tribo-nanorheology at distances less than 50 nm from the surface. Through such multiscale measurements, it is confirmed that this increase is due to the formation of a layered structure of silicone oil polymers on the solid surface. These results provide a comprehensive understanding of the tribo-rheological properties of complex fluids across different scales., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Inertial Confinement Fusion and Magnetic Confinement Fusion (ICF and MCF) follow different paths toward goals that are largely common. In this paper, the claim is made that progress can be accelerated by learning from each other across the two fields. Examples of successful cross-community knowledge transfer are presented that highlight the gains from working together, specifically in the areas of high-resolution x-ray imaging spectroscopy and neutron spectrometry. Opportunities for near- and mid-term collaboration are identified, including in chemical vapor deposition diamond detector technology, using gamma rays to monitor fusion gain, handling neutron-induced backgrounds, developing radiation hard technology, and collecting fundamental supporting data needed for diagnostic analysis. Fusion research is rapidly moving into the igniting and burning regimes, posing new opportunities and challenges for ICF and MCF diagnostics. This includes new physics to probe, such as alpha heating; increasingly harsher environmental conditions; and (in the slightly longer term) the need for new plant monitoring diagnostics. Substantial overlap is expected in all of these emerging areas, where joint development across the two subfields as well as between public and private researchers can be expected to speed up advancement for all., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International (CC BY-NC-ND) license (https://creativecommons.org/licenses/by-nc-nd/4.0/).)

An array of compact, high-bandwidth (>200 MHz) and low-cost optical photodiodes has been developed and implemented on the PHASe MApping (PHASMA) experiment. Using purpose-built electronics, an array of 16 photodetectors was constructed and used to monitor broadband (1-5 MHz) fluctuations in light intensity emitted by flux ropes undergoing electron-only magnetic reconnection. These measurements reveal a swath of oscillatory behavior, including wave propagation inward toward the diffusion region at approximately the local electron Alfvén speed. Custom 3D-printed collection optics and mounting hardware allow quick reconfiguration of the array for radial or axial measurements. The electronics design is flexible enough to be used with other current-sourcing transducers, such as avalanche photodiodes; silicon photomultipliers; and infrared, x-ray, and UV photodiodes. A noise-rejecting electrical layout allows for low-noise operation close to pulsed plasma discharges. A 16-channel, 64-pixel tomographic array was constructed and initial reconstructions are presented., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Here, we present the design and first calibration results of a new single-channel Fast-Ion D-Alpha (FIDA) spectrometer to be employed at the National Spherical Torus Experiment Upgrade (NSTX-U). The Czerny-Turner-type spectrometer uses a custom-designed aspherical lens setup instead of mirrors and achieves excellent spectral resolution, with high photon throughput through a round-to-linear fiber bundle, and camera frame rates around 8.4 kHz. The spectrometer uses a blocking bar to avoid saturation effects of the cold D-alpha emission line and will allow for detailed studies of the fast-ion confinement in NSTX-U. Expected synthetic spectra predicted with the TRANSP and FIDASIM codes show that the spectral range from 648.5 to 658 nm will sufficiently cover halo, the red-shifted beam emission, and the blue-shifted portion of FIDA emission in NSTX-U, which is sufficient for fast-ion transport studies of co-rotating fast ions., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

The detection of various molecular species, including complex organic molecules relevant to biochemical and geochemical processes, in astronomical settings, such as the interstellar medium or the outer solar system, has led to the increased need for a better understanding of the chemistry occurring in these cold regions of space. In this context, the chemistry of ices prepared and processed at cryogenic temperatures has proven to be of particular interest due to the fact that many interstellar molecules are believed to originate within the icy mantles adsorbed on nano- and micro-scale dust particles. The chemistry leading to the formation of such molecules may be initiated by ionizing radiation in the form of galactic cosmic rays or stellar winds, and thus, there has been an increased interest in commissioning experimental setups capable of simulating and better characterizing this solid-phase radiation astrochemistry. In this article, we describe a new facility called AQUILA (Atomki-Queen's University Ice Laboratory for Astrochemistry), which has been purposefully designed to study the chemical evolution of ices analogous to those that may be found in the dense interstellar medium or the outer solar system as a result of their exposure to keV ion beams. The results of some ion irradiation studies of CH3OH ice at 20 K are discussed to exemplify the experimental capabilities of the AQUILA as well as to highlight its complementary nature to another laboratory astrochemistry setup at our institute., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

This study employs a fast camera with frame rates up to 900,000 fps to measure the transfer of energy across spatial scales in helicon source plasmas and during flux rope mergers and the measurement of azimuthal mode structures in helicon plasmas. By extracting pixel-scale dispersion relations and power spectral density (PSD) measurements, we measure the details of turbulent wave modes and energy distribution across a broad range of spatial scales within the plasma. We confirm the presence of drift waves in helicon plasmas, as well as the existence of strong dissipation regions in the PSD at electron skin depth scales for both helicon and flux rope merger experiments. This approach overcomes many limitations of conventional probes, providing high spatial and temporal resolution, without perturbing the plasma., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

We present a system for the growth of molecular films in vacuum that exhibits high versatility with respect to the choice of molecular species. These can be either evaporated from powders or injected from solutions using an electrospray system, making it possible to handle particularly large and/or fragile molecules in a controlled environment. The apparatus is equipped with a reflectance anisotropy spectroscopy system for the in situ characterization of the optical response of the films and can be directly connected to a photoelectron spectrometer without breaking the vacuum. The system is conceived for the study and characterization of porphyrin films. Here, to showcase the range of possible analyses allowed by the experimental setup and test the operation of the system, novel results are provided on electrospray deposition on highly oriented pyrolytic graphite of Zn tetraphenyl porphyrins and Zn proto porphyrins, the latter featuring fragile side groups that make deposition from solution more attractive. In situ characterization is complemented by ex situ atomic force microscopy. Thanks to this multi-technique approach, changes in the film morphology and spectroscopic response are detected and directly related to the choice of the molecular moiety and growth method., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International (CC BY-NC-ND) license (https://creativecommons.org/licenses/by-nc-nd/4.0/).)

A compact ion source combining electron impact and thermal ionization has been developed and commissioned in two Multiple-Reflection Time-Of-Flight Mass Spectrometer (MR-TOF-MS) setups at the Fragment Separator Ion Catcher at the GSI Helmholtz Centre for Heavy Ion Research, Darmstadt, Germany, and at TRIUMF's Ion Trap for Atomic and Nuclear science at TRIUMF Canada's particle accelerator center, Vancouver, Canada. The ion source is notable for its compact dimensions of 50 mm in height and 68 mm in diameter. The ion source is currently in daily operation at both facilities. Design, simulations, and results of combining ions from thermal and electron-impact ionization of different gases (perfluoropropane and sulfur hexafluoride) are presented in this work. The systematic effects of heating power on the thermal source were studied in detail. The source has demonstrated stable and long-term production of reference ions over a wide mass range for the MR-TOF-MS. This versatile ion source has also been used to optimize and investigate the transport of ions with different chemical reactivity and ionization potentials., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).)

X-ray opacity measurements on the National Ignition Facility (NIF) are in the process of reproducing earlier measurements from the Sandia Z Facility, in particular for oxygen and iron plasmas. These measurements have the potential to revise our understanding of the "solar problem" and of the hot degenerate Q class white dwarf structure by probing plasma conditions near the base of their convection zones. Accurate opacity measurements using soft x-ray Bragg crystal spectrometers require correction for higher-order diffraction effects. Extending prior work in this area [Dutra et al., Review of Scientific Instruments 93, 113527 (2022)], we have developed a new method to remove higher-order spectral components from NIF opacity spectrometer data. By modeling absorption and backlighting continuum spectra and subtracting the second- and third-order components from the measured data, we are able to perform this correction while avoiding imprinting first-order model line features onto the data., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

A set of new millimeter-wave diagnostics will deliver unique measurement capabilities for National Spherical Torus Experiment-Upgrade to address a variety of plasma instabilities believed to be important in determining thermal and particle transport, such as micro-tearing, global Alfvén eigenmodes, kinetic ballooning, trapped electron, and electron temperature gradient modes. These diagnostics include a new integrated intermediate-k Doppler backscattering (DBS) and cross-polarization scattering (CPS) system (four channels, 82.5-87 GHz) to measure density and magnetic fluctuations, respectively. The system can access reasonably large normalized wavenumbers kθρs ranging from ≤0.5 to 15 (where ion sound gyroradius ρs = 1 cm and kθ is the binormal density turbulence wavenumber). The system addresses the challenges for making useful DBS/CPS measurements with a remote control of launch polarization (X- or O-mode), probed wavenumber, polarization match of the launch beam with the edge magnetic field pitch angle, and beam steering of the launched beam for wave-vector alignment. In addition, a low-k DBS system consisting of eight fixed frequencies (34-52 GHz) and four tunable frequencies (55-75 GHz) for low-k density turbulence and fast ion physics will be located at a nearby port location. The combined systems cover the near LCFS and pedestal regions (34-52 GHz), the pedestal or mid-radius (50-75 GHz), and core plasmas (82.5-87 GHz)., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

One of the daunting challenges in modern low temperature scanning tunneling microscopy (STM) is the difficulty of combining atomic resolution with cryogen-free cooling. Further functionality needs, such as ultra-high vacuum (UHV), high magnetic field (HF), and compatibility with μm-sized samples, pose additional challenges to an already ambitious build. We present the design, construction, and performance of a cryogen-free, UHV, low temperature, and high magnetic field system for modular STM operation. An internal vibration isolator reduces vibrations in this system, allowing for atomic resolution STM imaging while maintaining a low base temperature of ∼4 K and magnetic fields up to 9 T. Samples and tips can be conditioned in situ utilizing a heating stage, an ion sputtering gun, an e-beam evaporator, a tip treater, and sample exfoliation. In situ sample and tip exchange and alignment are performed in a connected UHV room temperature stage with optical access. Multisite operation without breaking vacuum is enabled by a unique quick-connect STM head design. A novel low-profile vertical transfer mechanism permits transferring the STM between room temperature and the low temperature cryostat., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

We present the design and laboratory tests for a new Q-band frequency tunable Doppler backscattering (DBS) system suitable for probing poloidal wavenumber kñ = 6-8 cm-1 density fluctuations and their flow velocities in the pedestal and scape-off layer (SOL) of the DIII-D tokamak. This system will provide new measurements in the increasingly important and under-diagnosed far pedestal and SOL plasma regions. These results are important for experimental transport studies and necessary for the validation of transport models, both of which are important to fusion energy research. The use of a single tunable frequency reduces the complexity and potential failure points as compared to a multichannel system. This new system utilizes a 33-50 GHz tunable source and will be integrated into the current V-band DBS in DIII-D using a broadband Q- and V-band multiplexer. A full-scale mockup of the quasi-optical system was used to test and optimize the performance. These tests include beam profile measurements at different distances (and angles) from a paraboloidal focusing and steering mirror. The measurements cover the full frequency range 33-75 GHz of the integrated/combined Q-V band DBS system and target a large radial coverage of the low-field side of the plasma from ρ = 1.1 to ρ = 0.5, where ρ is the normalized flux surface radial coordinate., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Validated and accurate edge profiles (temperature, density, etc.) are vitally important to the Mega Ampere Spherical Tokamak Upgrade (MAST-U) divertor and confinement effort. Density profile reflectometry has the potential to significantly add to the measurement capabilities currently available on MAST-U (e.g., Thomson scattering and Langmuir probes). This work presents the diagnostic requirements, problems, and solutions facing profile reflectometry in spherical tokamaks and MAST-U in particular. Requirements include density measurements near zero electron density in the scrape off layer region, coverage for a broad range of MAST-U plasma parameters, high time (≤10 microseconds) and spatial resolutions (≤1 cm), reliability, and identification of the plasma start frequency., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

The emerging field of optical magnetometry utilizing negative-charged nitrogen vacancy (NV-) centers provides a highly sensitive lab bench technique for spatially resolved physical property measurements. Their implementation in high pressure diamond anvil cell (DAC) environments will become common as other techniques are often limited due to the spatial constraints of the sample chamber. Apparatus and techniques are described here permitting for more general use of magnetic field measurements inside a DAC using continuous wave optical detected magnetic resonance in NV- centers in a layer of nanodiamonds. A microstrip antenna delivers a uniform microwave field to the DAC and is compatible with simple metal gaskets, and the sensor layer of deposited nanodiamonds allows for simple determination of the magnetic field magnitude for B in the 1-100 G range. The ferromagnetic transition in iron at 18 GPa is measured with the apparatus, along with its hysteretic response., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

First proton production rates from the d(d,p)t reaction in the Mega Amp Spherical Tokamak Upgrade (MAST-U) are measured. The data were taken during the MAST-U experimental campaign with an upgraded version of the proton detector (PD) previously used in MAST. The new detector array consists of three collimated silicon surface barrier detectors with a depletion depth of 300 μm and a collimated 120 μm thick diamond detector, mounted on the MAST-U reciprocating probe arm. This array measures the energies of unconfined energetic 3 MeV protons and 1 MeV tritons mainly produced by beam-thermal DD reactions during neutral beam injection heating. Diamond detectors have the potential to be uniquely suited to detect charged fusion products as they promise to be much more radiation resistant and much less sensitive to temperature variations compared to silicon-based detectors. Using silicon and diamond-based detectors simultaneously allowed us to directly compare the performance of these two detector types. PD particle rates measured during different plasma scenarios are presented and compared to neutron rates measured using the neutron camera upgrade and TRANSP predictions., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Fast beam collinear laser spectroscopy is the established method to investigate nuclear ground state properties such as the spin, the electromagnetic moments, and the charge radius of exotic nuclei. These are extracted with high precision from atomic observables, i.e., the hyperfine splitting and the isotope shift, which become possible due to a large reduction of the Doppler broadening by compressing the velocity width of the ion beam through electrostatic acceleration. With the advancement of experimental methods and applied devices, e.g., to measure and stabilize the laser frequency, the acceleration potential became the dominant systematic uncertainty contribution. To overcome this, we present a custom-built high-voltage divider, which was developed and tested at the German metrology institute, and a feedback loop that enabled collinear laser spectroscopy to be performed at a 100-kHz level. Furthermore, we describe the impact of field penetration into the laser-ion interaction region. This affects the determined isotope shifts and hyperfine splittings if Doppler tuning is applied, i.e., the ion beam energy is altered instead of scanning the laser frequency. Using different laser frequencies that were referenced to a frequency comb, the field penetration was extracted laser spectroscopically. This allowed us to define an effective scanning potential to still apply the faster and easier Doppler tuning without introducing systematic deviations., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC) license (https://creativecommons.org/licenses/by-nc/4.0/).)

We present a fully relativistic analytical model for calculating synthetic spectra from beam-target fusion reactions. When the target particle is assumed at rest, Monte Carlo sampling of reactant velocities can be avoided, and spectrum computations are considerably faster. A fully analytical treatment additionally gives more insight into the spectrum formation. The fully relativistic formulation now makes it possible to handle massless particles in the model, for example from one-step gamma-ray reactions, and the results are corroborated by simulations from established codes., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

To validate nonlinear gyrokinetic simulations of electron temperature turbulence, the experimental correlation electron cyclotron emission (CECE) measurements are to be compared using a synthetic CECE diagnostic, which generates modeled CECE measurement quantities by implementing realistic measurement parameters (e.g., spatial and wavenumber resolutions, radial location, etc.) to nonlinear gyrokinetic simulations. In this work, we calculate the radial and vertical spatial and wavenumber transfer functions, which are defined by the electron cyclotron emission emissivity radial profile and vertical probing antenna pattern, respectively. These transfer functions are applied to nonlinear gyrokinetic simulations of electron temperature turbulence using the continuum gyrokinetic code. A simultaneous comparison of the experimental electron temperature turbulence power spectrum and root-mean-square (RMS) level, as well as the radial correlation length with the new synthetic CECE diagnostic at a core location ρ ∼ 0.75 in an L-mode DIII-D tokamak plasma, is presented. The preliminary result shows that the synthetic CECE output underestimates the RMS level by ∼42% and overestimates the radial correlation length by ∼40%., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

The small signal-to-noise ratio (SNR) of conventional laser induced fluorescence (LIF) measurements using a continuous wave laser, either diode or dye, is typically overcome by amplitude modulating the laser at a specific frequency and then using lock-in amplification to extract the signal from measurement noise. Here, we present LIF measurements of the neutral helium velocity distribution function in an rf plasma using frequency modulated (FM) laser injection. A pulse train of 100% amplitude modulation is generated synthetically with a random sequence of pulse lengths. The FM signal then drives an acoustic optic modulator placed in the path of the injection beam in an LIF measurement. The signal from a fast photomultiplier tube is digitized and cross-correlated with the known modulation signal. The resultant FM-based LIF signal outperforms a conventional lock-in-based LIF measurement on the same plasma in terms of SNR and precision., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

We report on a new technique for measuring the dynamic Young's modulus, E, of quantum materials at low temperatures as a function of static tuning strain, ϵ, in piezoactuator-driven pressure cells. In addition to a static tuning of stress and strain, we apply a small-amplitude, finite-frequency AC (1 Hz ≲ ω ≲ 1000 Hz) uniaxial stress, σac, to the sample and measure the resulting AC strain, ϵac, using a capacitive sensor to obtain the associated modulus E. We demonstrate the performance of the new technique through proof-of-principle experiments on the unconventional superconductor Sr2RuO4, which is known for its rich temperature-strain phase diagram. In particular, we show that the magnitude of E, measured using this AC technique at low frequencies, exhibits a pronounced nonlinear elasticity, which is in very good agreement with previous Young's modulus measurements on Sr2RuO4 under [1 0 0] strain using a DC method [Noad et al., Science 382, 447-450 (2023)]. By combining the new AC Young's modulus measurements with AC elastocaloric measurements in a single measurement, we demonstrate that these AC techniques are powerful in detecting small anomalies in the elastic properties of quantum materials. Finally, using the case of Sr2RuO4 as an example, we demonstrate how the imaginary component of the modulus can provide additional information about the nature of ordered phases., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).)

Diamond anvil cells are the most popular means of generating pressures above 2 GPa. However, in many experiments, such as nuclear magnetic resonance and x-ray absorption, the metallic pressurizing gasket (which confines much of the sample) represents an occluding barrier that requires a low Z gasket material (e.g., Be), a split gasket, or other means to enable better coupling of the sample to electromagnetic radiation. In this paper, we demonstrate a novel method for generating high pressures that confines the sample just above the plane of the gasket by using a diamond with a laser hole drilled into the center of the tip. The sample is then confined by the hole, which is sealed by a flat gasket that fits over the hole. When load is applied to the diamonds, metal flows from the deformed gasket into the hole thereby pressurizing the sample similarly to how a piston pressurizes gas inside a cylinder. The pressurized sample is above the metallic gasket plane just inside the tip of the diamond, and thus easily accessible via x rays or visible light that skims just above the plane of the gasket providing an enhanced aperture of radiation collection. We have demonstrated the utility of this method by obtaining Raman spectra of SnC2O4 and x-ray diffraction spectra of seleno-DL-cystine, all at high pressures., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

To meet changing research demands, new scanning tunneling microscope (STM) features must constantly evolve. We describe the design, development, and performance of a modular plug-in STM, which is compact and stable. The STM head is equipped with a quick-connect socket that is matched to a universal connector plug, enabling it to be transferred between systems. This head can be introduced into a vacuum system via a load-lock and transferred to various sites equipped with the connector plug, permitting multi-site STM operation. Its design allows for reliable operation in a variety of experimental conditions, including a broad temperature range, ultra-high vacuum, high magnetic fields, and closed-cycle pulse-tube cooling. The STM's compact size is achieved by a novel nested piezoelectric coarse walker design, which allows for large orthogonal travel in the X, Y, and Z directions, ideal for studying both bulk and thin film samples ranging in size from mm to μm. Its stability and noise tolerance are demonstrated by achieving atomic resolution under ambient conditions on a laboratory desktop with no vibrational or acoustic isolation. The operation of the nested coarse walkers is demonstrated by successful navigation to a μm-sized 2D sample., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Accurately measuring the translations of objects between images is essential in many fields, including biology, medicine, chemistry, and physics. One important application is tracking one or more particles by measuring their apparent displacements in a series of images. Popular methods, such as the center of mass, often require idealized scenarios to reach the shot noise limit of particle tracking and, therefore, are not generally applicable to multiple image types. More general methods, such as maximum likelihood estimation, reliably approach the shot noise limit, but are too computationally intense for use in real-time applications. These limitations are significant, as real-time, shot-noise-limited particle tracking is of paramount importance for feedback control systems. To fill this gap, we introduce a new cross-correlation-based algorithm that approaches shot-noise-limited displacement detection and a graphics processing unit-based implementation for real-time image analysis of a single particle., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

In H-mode tokamak plasmas, the plasma is sometimes ejected beyond the edge transport barrier. These events are known as edge localized modes (ELMs). ELMs cause a loss of energy and damage the vessel walls. Understanding the physics of ELMs, and by extension, how to detect and mitigate them, is an important challenge. In this paper, we focus on two diagnostic methods-deuterium-alpha (Dα) spectroscopy and Doppler backscattering (DBS). The former detects ELMs by measuring Balmer alpha emission, while the latter uses microwave radiation to probe the plasma. DBS has the advantages of having a higher temporal resolution and robustness to damage. These advantages of DBS diagnostic may be beneficial for future operational tokamaks, and thus, data processing techniques for DBS should be developed in preparation. In sight of this, we explore the training of neural networks to detect ELMs from DBS data, using Dα data as the ground truth. With shots found in the DIII-D database, the model is trained to classify each time step based on the occurrence of an ELM event. The results are promising. When tested on shots similar to those used for training, the model is capable of consistently achieving a high f1-score of 0.93. This score is a performance metric for imbalanced datasets that ranges between 0 and 1. We evaluate the performance of our neural network on a variety of ELMs in different high confinement regimes (grassy ELM, RMP mitigated, and wide-pedestal), finding broad applicability. Beyond ELMs, our work demonstrates the wider feasibility of applying neural networks to data from DBS diagnostic., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

We describe a new experimental system for direct measurements of the absolute saturation vapor pressures of liquid or solid samples. The setup allows the isolation of the sample under steady conditions in an ultra-high vacuum chamber, where the measurement of the sample's vapor pressure as a function of its temperature can be performed in a range around room temperature and in a pressure range defined only by the applied absolute pressure sensor. We characterize the setup and illustrate its capability to measure saturation vapor pressures as well as enthalpies of evaporation around room temperature with explicit measurements on four liquid compounds (diethyl phthalate, 1-decanol, 1-heptanol, and 1-hexanol) for which accurate vapor pressures have previously been reported., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Here, we report the first time- and angle-resolved photoemission spectroscopy (TR-ARPES) with the new Fermiologics "FeSuMa" analyzer. The new experimental setup has been commissioned at the Artemis laboratory of the UK Central Laser Facility. We explain here some of the advantages of the FeSuMa for TR-ARPES and discuss how its capabilities relate to those of hemispherical analyzers and momentum microscopes. We have integrated the FeSuMa into an optimized pump-probe beamline that permits photon-energy (i.e., kz)-dependent scanning, using probe energies generated from high harmonics in a gas jet. The advantages of using the FeSuMa in this situation include the possibility of taking advantage of its "fisheye" mode of operation., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).)

Angle-resolved photoemission spectroscopy (ARPES) is a technique used to map the occupied electronic structure of solids. Recent progress in x-ray focusing optics has led to the development of ARPES into a microscopic tool, permitting the electronic structure to be spatially mapped across the surface of a sample. This comes at the expense of a time-consuming scanning process to cover not only a three-dimensional energy-momentum (E, kx, ky) space but also the two-dimensional surface area. Here, we implement a protocol to autonomously search both k- and real-space in order to find positions of particular interest, either because of their high photoemission intensity or because of sharp spectral features. The search is based on the use of Gaussian process regression and can easily be expanded to include additional parameters or optimization criteria. This autonomous experimental control is implemented on the SGM4 micro-focus beamline of the synchrotron radiation source ASTRID2., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

We present nuclear magnetic resonance data in BaFe2As2 in the presence of pulsed strain fields that are interleaved in time with the radio frequency excitation pulses. In this approach, the preceding nuclear magnetization acquires a phase shift that is proportional to the strain and pulse time. The sensitivity of this approach is limited by the homogeneous decoherence time, T2, rather than the inhomogeneous linewidth. We measure the nematic susceptibility as a function of temperature and demonstrate a three orders of magnitude improvement in sensitivity. This approach will enable studies of the strain response in a broad range of materials that previously were inaccessible due to inhomogeneous broadening., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

This paper presents a new technique to study the adsorption and desorption of ions and electrons on insulating surfaces in the presence of strong electric fields in cryoliquids. The experimental design consists of a compact cryostat coupled with a sensitive electro-optical Kerr device to monitor the stability of the electric fields. The behavior of nitrogen and helium ions on a poly(methyl methacrylate) (PMMA) surface was compared to a PMMA surface coated with a mixture of deuterated polystyrene and deuterated polybutadiene. Ion accumulation and removal on these surfaces were unambiguously observed. Within the precision of the data, both surfaces behave similarly for the physisorbed ions. The setup was also used to measure the (quasi-)static dielectric constant of PMMA at T ≈ 70 K. The impact of the ion adsorption on the search for a neutron permanent electric dipole moment in a cryogenic environment, such as the nEDM@SNS experiment, is discussed., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Trapped ions for quantum information processing have been an area of intense study due to the extraordinarily high fidelity operations that have been reported experimentally. Specifically, barium trapped ions have been shown to have exceptional state-preparation and measurement fidelities. The 133Ba+ (I = 1/2) isotope in particular is a promising candidate for large-scale quantum computing experiments. However, a major pitfall with this isotope is that it is radioactive and is thus generally used in microgram quantities to satisfy safety regulations. We describe a new method for creating microgram barium chloride (BaCl2) ablation targets for use in trapped ion experiments and compare our procedure to previous methods. We outline two recipes for the fabrication of ablation targets that increase the production of neutral atoms for isotope-selective loading of barium ions. We show that heat-treatment of the ablation targets greatly increases the consistency at which neutral atoms can be produced, and we characterize the uniformity of these targets using trap-independent techniques such as energy dispersive x-ray spectroscopy and neutral fluorescence collection. Our comparison between fabrication techniques and the demonstration of consistent neutral fluorescence paves a path toward reliable loading of 133Ba+ in surface traps and opens opportunities for scalable quantum computing with this isotope., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

InGaAs/InP-based negative-feedback avalanche diodes (NFADs) have been demonstrated to be an excellent option for photon detection at telecom wavelengths in quantum communication applications, where photon arrival times are random. However, it is well-known that the operation of NFADs at low temperatures (193 K or below) is crucial to minimize the effects of afterpulsing and high dark count rates (DCRs). In this work, we present a new versatile readout electronics system with active afterpulse suppression that also offers flexible cooling options. Through the characterization of two NFAD detectors from Princeton Lightwave, Inc. and a thorough evaluation of our electronics' performance under various operating conditions, we demonstrate the effectiveness of this readout system in improving the performance of NFAD-based photon detectors. At the optimal bias for NFADs, our electronics were able to significantly reduce the afterpulsing probability by a factor of 200 for dead times ranging from 5 to 20 µs following each detection event. This helps to keep the total DCRs at around 100 counts per second or less for a 20 µs hold-off time. The versatility of our detection system makes NFADs a cost-effective alternative to more complex detectors, such as superconducting nanowire single-photon detectors, in the research of long-distance quantum communications and low-noise single photon detectors at telecommunication wavelengths., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

The design, manufacture, and characterization of an inexpensive, temperature-controlled vacuum chamber with millikelvin stability for electrical transport measurements at and near room temperature is reported. A commercially available Peltier device and a high-precision temperature controller are used to actively heat and cool the sample space. The system was designed to minimize thermal fluctuations in spintronic and semiconductor transport measurements, but the general principle is relevant to a wide range of electrical measurement applications. The main issues overcome are the mounting of a sample with a path of high thermal conductivity through to the Peltier device and the heat sinking of the said Peltier device inside a vacuum. A copper slug is used as the mount for a sample, and a large copper block is used as a thermal feedthrough before a passive heat sink is used to cool this block. The Peltier device provides 20 W of heating and cooling power, achieving a maximum range of 30 K below and 40 K above the ambient temperature. The temperature stability is within 5 mK at all set points with an even better performance above the ambient temperature. A vacuum pressure of 10-8 hPa is achievable. As a demonstration, we present experimental results from current-induced electrical switching of a CuMnAs thin film. Transport measurements with and without the Peltier control emphasize the importance of a constant temperature in these applications. The thermal lag between the sample space measurement and the sample itself is observed through magnetoresistance values measured during a temperature sweep., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

Multigap cavities are used extensively in linear accelerators to achieve velocities up to a few percent of the speed of light, driving nuclear physics research around the world. Unlike for single-gap structures, there is no closed-form expression to calculate the output beam parameters from the cavity voltage and phase. To overcome this, we propose to use a method based on the integration of the first and second moments of the beam distribution through the axially symmetric time-dependent fields of the cavity. A beam-based calibration between the model's electric field scaling and the machine's rf amplitudes is presented, yielding a fast online energy change method, returning cavity amplitude and phase necessary for a desired output beam energy and energy spread. The method is validated with 23Na6+ beam energy measurements., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

We present a method for the reconstruction of ion kinetic energy distributions from ion time-of-flight mass spectra through ion trajectory simulations. In particular, this method is applicable to complicated spectrometer geometries with largely anisotropic ion collection efficiencies. A calibration procedure using a single ion mass peak allows the accurate determination of parameters related to the spectrometer calibration, experimental alignment, and instrument response function, which improves the agreement between simulations and experiment. The calibrated simulation is used to generate a set of basis functions for the time-of-flight spectra, which are then used to transform from time-of-flight to kinetic-energy spectra. We demonstrate this reconstruction method on a recent pump-probe experiment by Asmussen et al. [Asmussen et al., Phys. Chem. Chem. Phys., 23, 15138, (2021)] on helium nanodroplets and retrieve time-resolved kinetic-energy-release spectra for the ions from ion time-of-flight spectra., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)