Search

Measurements of ion temperature profiles are required to assess the energy and particle transport processes in the Wendelstein 7-X stellarator. This device is equipped with a diagnostic alkali beam, which can be utilized to determine local impurity temperatures and densities by Charge Exchange Recombination Spectroscopy (CXRS). It could provide such profiles in the edge plasma, where other diagnostics are less efficient. With this contribution, first results of CXRS measurements on the sodium beam from the scientific operation phase OP2.1 are presented. The spectroscopic system was in commissioning phase lacking some of the final optical components. Thus, the aim of the diagnostics during this campaign was to explore the measurement capabilities. Based on the processed spectra, the prospects of C5+ and C6+ ion temperature and concentration measurements are discussed. The results indicate that with the final optical setup under installation, the diagnostics could provide ion temperature profiles in the edge with 3 mm radial resolution and at least 1 s temporal resolution. [ABSTRACT FROM AUTHOR]

In nuclear fusion research, the effective ion charge Zeff, which characterizes the overall content of impurities, can be experimentally derived from the plasma electron–ion bremsstrahlung, given the electron density ne and temperature Te. At Wendelstein 7-X, a multichannel near-infrared spectrometer is installed to collect the plasma bremsstrahlung along 27 lines of sight covering more than half the plasma cross section, which provides information on Zeff over the entire plasma radius. To infer spatially resolved Zeff profiles, a Bayesian model is developed in the Minerva framework. Zeff, ne, and Te profiles are modeled as Gaussian processes, whose smoothness is determined by hyperparameters. These profiles are transformed to fields in Cartesian coordinates, given the poloidal magnetic flux surfaces calculated by the variational moments equilibrium code. Given all these physical quantities, the model predicts line-of-sight integrals of near-infrared bremsstrahlung spectra. The model includes the predictive (forward) models of the interferometer, Thomson scattering system, and visible and near-infrared spectrometers. Given the observations of all these diagnostics, the posterior probability distribution of Zeff profiles is calculated and shown as an inference solution. The smoothness (gradient) of the profiles is optimally chosen by Bayesian Occam's razor. Furthermore, wall reflections can significantly pollute the measurements of the plasma bremsstrahlung, which leads to over-estimation of Zeff values in the edge region. In the first results presented in this work, this problem does not appear, and the posterior samples of Zeff profiles are overall plausible and consistent with Zeff values inferred, given the data from the single-channel visible spectrometer. [ABSTRACT FROM AUTHOR]

We present a framework for training artificial neural networks (ANNs) as surrogate Bayesian models for the inference of plasma parameters from diagnostic data collected at nuclear fusion experiments, with the purpose of providing a fast approximation of conventional Bayesian inference. Because of the complexity of the models involved, conventional Bayesian inference can require tens of minutes for analyzing one single measurement, while hundreds of thousands can be collected during a single plasma discharge. The ANN surrogates can reduce the analysis time down to tens/hundreds of microseconds per single measurement. The core idea is to generate the training data by sampling them from the joint probability distribution of the parameters and observations of the original Bayesian model. The network can be trained to learn the reconstruction of plasma parameters from observations and the model joint probability distribution from plasma parameters and observations. Previous work has validated the application of such a framework to the former case at the Wendelstein 7-X and Joint European Torus experiments. Here, we first give a description of the general methodological principles allowing us to generate the training data, and then we show an example application of the reconstruction of the joint probability distribution of an effective ion charge Zeff-bremsstrahlung model from data collected at the latest W7-X experimental campaign. One key feature of such an approach is that the network is trained exclusively on data generated with the Bayesian model, requiring no experimental data. This allows us to replicate the training scheme and generate fast, surrogate ANNs for any validated Bayesian diagnostic model. [ABSTRACT FROM AUTHOR]

Fusion reactors and long pulse fusion experiments heavily depend on a continuous fuel cycle, which requires detailed monitoring of exhaust gases. We have used a diagnostic residual gas analyzer (DRGA) built as a prototype for ITER and integrated it on the most advanced stellarator fusion experiment, Wendelstein 7-X (W7-X). The DRGA was equipped with a sampling tube and assessed for gas time of flight sample response, effects of magnetic field on gas detection and practical aspects of use in a state of the art fusion environment. The setup was successfully commissioned and operated and was used to observe the gas composition of W7-X exhaust gases. The measured time of flight gas response was found to be in the order of a second for a 7 m sample tube. High values of magnetic field were found to affect the partial pressure readings of the DRGA and suggest that additional shielding is necessary in future experimental campaigns. [ABSTRACT FROM AUTHOR]

A beam emission spectroscopy system on thermal helium (He) and neon (Ne) has been set up at Wendelstein 7-X to measure edge electron temperature and density profiles utilizing the line-ratio technique or its extension by the analysis of absolutely calibrated line emissions. The setup for a first systematic test of these techniques of quantitative atomic spectroscopy in the limiter startup phase (OP1.1) is reported together with first measured profiles. This setup and the first results are an important test for developing the technique for the upcoming high density, low temperature island divertor regime. [ABSTRACT FROM AUTHOR]

Wendelstein 7-X, a superconducting optimized stellarator built in Greifswald/Germany, started its first plasmas with the last closed flux surface (LCFS) defined by 5 uncooled graphite limiters in December 2015. At the end of the 10 weeks long experimental campaign (OP1.1) more than 20 independent diagnostic systems were in operation, allowing detailed studies of many interesting plasma phenomena. For example, fast neutral gas manometers supported by video cameras (including one fast-frame camera with frame rates of tens of kHz) as well as visible cameras with different interference filters, with field of views covering all ten half-modules of the stellarator, discovered a MARFE-like radiation zone on the inboard side of machine module 4. This structure is presumably triggered by an inadvertent plasma-wall interaction in module 4 resulting in a high impurity influx that terminates some discharges by radiation cooling. The main plasma parameters achieved in OP1.1 exceeded predicted values in discharges of a length reaching 6 s. Although OP1.1 is characterized by short pulses, many of the diagnostics are already designed for quasi-steady state operation of 30 min discharges heated at 10 MW of ECRH. An overview of diagnostic performance for OP1.1 is given, including some highlights from the physics campaigns. [ABSTRACT FROM AUTHOR]

A combined IR and visible camera system [G. A.Wurden et al., "A high resolution IR/visible imaging system for the W7-X limiter," Rev. Sci. Instrum. (these proceedings)] and a filterscope system [R. J. Colchin et al., Rev. Sci. Instrum. 74, 2068 (2003)] were implemented together to obtain spectroscopic data of limiter and first wall recycling and impurity sources during Wendelstein 7-X startup plasmas. Both systems together provided excellent temporal and spatial spectroscopic resolution of limiter 3. Narrowband interference filters in front of the camera yielded C-III and Hα photon flux, and the filterscope system provided Hα, Hβ, He-I, He-II, C-II, and visible bremsstrahlung data. The filterscopes made additional measurements of several points on the W7-X vacuum vessel to yield wall recycling fluxes. The resulting photon flux from both the visible camera and filterscopes can then be compared to an EMC3-EIRENE synthetic diagnostic [H. Frerichs et al., "Synthetic plasma edge diagnostics for EMC3-EIRENE, highlighted for Wendelstein 7-X," Rev. Sci. Instrum. (these proceedings)] to infer both a limiter particle flux and wall particle flux, both of which will ultimately be used to infer the complete particle balance and particle confinement time τP. [ABSTRACT FROM AUTHOR]

For the W7-X stellarator a diagnostic system for measurement of local Zeff values from the visible bremsstrahlung continuum is foreseen. The method is based on passive, absolute measurement of the bremsstrahlung intensity along several lines of sight. In order to eliminate the spurious impact of other radiation sources of different spectral intensity distribution than the bremsstrahlung, like the line radiation, it is intended to spectrally resolve the detected radiation, e.g., by use of microspectrometers. The visible bremsstrahlung background can be extracted by making use of the 1/λ2 dependence of its intensity (expressed in unit W/m3 sr nm) in the high temperature plasmas by using Bayesian data analysis techniques. In a second step, the local values of Zeff as a function of the effective plasma radius are derived by inversion, using different regularization methods, of the line-integrated bremsstrahlung signals with the knowledge of the magnetic flux surfaces. Inversion of the full model based on statistical methods allows taking into account all conceivable uncertainties accompanying Zeff measurement and provides uncertainties of the local Zeff values and valuable information on other uncertain parameters of the model. In this paper we show the first steps in developing a virtual Zeff diagnostic for W7-X which allows the optimization of the statistical model as well as of the future diagnostic setup. [ABSTRACT FROM AUTHOR]

Ellipsometry is widely used to characterize the thickness and optical parameters of thin films deposited, for example, in industrial processes. It is based on the measurement of polarization change upon reflection of, for example, visible light at a material sample. Commercially available devices are designed for stationary applications and often rely on precise geometric adjustment of the optical setup to maximize the measurement precision. In this work, a simplified spectral ellipsometer is proposed and tested with the aim of flexible implementation in space-limited applications in thermonuclear fusion research: on the one hand, as a hand-held device for large thickness scans of coatings deposited on first-wall components inside the vacuum vessel of fusion experiments and, on the other hand, for in situ monitoring of plasma deposited coatings on diagnostic vacuum windows, reducing their transmission in the optical spectral range, which hampers spectroscopic diagnostics in long-pulse plasma experiments. The simplicity of the hardware setup is partially compensated by complex Bayesian inference of the coating parameters, which incorporates all uncertainties of the measurement and the model and provides a quantitative assessment of the final uncertainties of inferred coating parameters. The Bayesian inference based on synthetic observations is also used to optimize the diagnostic design, identifying the limiting parameters and quantifying their impact on final accuracy. For real-time analysis of layer thickness on first-wall components in fusion devices measured with the hand-held device, a neural network based analysis has been implemented, and promising test results are presented., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)