Search

This paper proposes the first application of a split-range control technique on a concentrating solar collector to improve an absorption plant production. Solar absorption plants have solar power availability in phase with cooling demand under design conditions. Thus, it is a powerful cooling technology in the context of renewable energy and energy efficiency. These plants need control systems to cope with solar irradiance intermittency, reject irradiation disturbances, manage fossil fuels backup systems and dump closed-loop thermal-hydraulic oscillations. In this work, control techniques are proposed and simulated in an absorption plant in Spain. The plant consists of a concentrating Fresnel solar collector connected to an absorption chiller. The objectives are to operate with 100% renewable solar energy and avoid safety defocus events while reducing temperature oscillations and control actuators effort. Firstly, the current available plant controllers are defined, then two modifications are proposed. The first modification is a split-range controller capable of manipulating both flow and defocus of the Fresnel collector, the second modification is a PI controller to substitute the original chiller on-off controller. The results compare, through validated models, the different control systems and indicate that using both proposed controllers reduces 94% of the sum of actuators effort and 43% of the integral of absolute set-point tracking error compared to the plant's factory pre-set controllers. The suggested controllers increase 66% of energy production and 63% of exergy production. Besides, the split-range technique can be extended to any concentrating solar collector control. [Display omitted] [ABSTRACT FROM AUTHOR]

This paper presents a model for optimizing the life cycle economic and environmental impacts of a hybrid renewable energy and battery storage system – as energy supply technologies (EST) for off-grid farms. Micro-hydropower and photovoltaics represent the primary renewable energy (RE) sources, with batteries and a diesel generator considered as possible back-up systems. A modified Non-dominated Sorting Genetic Algorithm II (NSGA-II) was developed and applied to a case study farm in Southern Spain and provided different EST solutions to optimize a design based on economic (life cycle costing or LCC) and environmental (life cycle assessment or LCA) constraints. The results highlighted that cases with a strong dependence on batteries could achieve minimum costs and lower impacts for climate change and energy resources (non-renewable fuels). In contrast, the optimal system for minimizing the consumption of material resources (metals/minerals) resulted in higher fuel use, which was up to 25% more expensive. The optimal EST solutions used up to 37% of the total energy generated; however, the results were sensitive to energy production-demand distributions. This methodology can help identify the most cost-effective solutions with the lower environmental impacts for decarbonizing the agricultural sector. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract: The most widespread support system for renewable-energy-sourced electricity (RES-E) is the feed-in tariff (FIT). FITs can be divided into fixed-FIT and premium systems. The latter type may also include a cap and floor option, turning it into a variable premium system. The cap value (upper limit) aims to avoid windfall profits for the RES-E investor if the electricity price rises quickly, while the floor value (lower limit) ensures minimum revenue, reducing the risk caused by low electricity prices. This paper examines the performance of the variable premium system as established in Spain (hourly-based) and investigates the possibility of alternative novel designs. For this purpose, an analysis was undertaken of the cap & floor system established in Spain based on real market data over a three year period and its performance compared to the fixed premium system (no cap & floor limitations) and two novel cap & floor designs (monthly- and yearly-based). Two other novel alternatives were also considered: daily- and weekly-based. It is shown that the hourly-based cap & floor system did not result in a reduction of the overall RES-E revenue compared to the fixed premium system over the three year period, though revenue was more evenly distributed from year-to-year. The paper concludes that variable premium systems should be based on monthly or yearly cap & floor mechanism as opposed to an hourly one. [Copyright &y& Elsevier]

Abstract: In the last few years the solar-powered air-conditioning systems have been in intensive development and more often are considered as the viable application for the thermal solar systems in the regions of southern Europe. This is mainly due to the increasing higher electrical consumption in many countries (especially in Spain) which is moving from the winter to summer months due to expanding usage of cooling systems in this period of the year. In this paper we will analyze the behaviour of the solar-assisted air-conditioning system installed in the CIESOL building. This system consists mainly of flat-plate solar collectors and the simple effect LiBr–H2O absorption chiller. Different operation modes were analyzed. Coefficient of performance (COP) at various generator, absorber, condenser and evaporator temperatures is investigated and experimental results show that in practice it is easy to obtain values of about 0.6. The main goal of this paper is to describe the characteristics of the developing building and the solar-assisted air-conditioning system. Another useful purpose is to find the optimum conditions and operation parameters for the solar system through analyzing various systems'' operation strategies. [Copyright &y& Elsevier]

Abstract: An analysis of scientific publications on solar energy was conducted to determine whether public interest in the subject is mirrored by more intense research in the area. To this end, the research published by Spain and Germany, the two EU countries with the highest installed photovoltaic capacity, was analyzed based on Web of Science data. The results show that: solar output has risen substantially; solar research has a greater impact (measured in terms of citations) than publications on other renewables such as wind power; scientific production on solar energy is high in Germany and Spain, which together account for 51% of the total in the EU-27; the pattern of topics researched in the two countries is very similar; and their international collaboration is more intense than the world average and higher than in countries such as the USA, China or Japan. Collaboration between them is likewise intense. The main conclusion is the divergence in Germany and Spain between solar energy demand/output growth, being exponential, and the growth of research papers on the subject, which is linear. [Copyright &y& Elsevier]

Abstract: Energy consumption in Spanish school buildings is higher during spring seasons. Thermal inertia of buildings can help to reduce such consumption, improve comfort, and even replace HVAC systems. This thermal inertia is usually associated to heavy wall construction, but the truth is there are other parameters that can have a significant effect on this property. This paper describes a field case study of school buildings with different types of wall construction, aimed at demonstrating real thermal inertia effects on indoor conditions. Besides air temperature measurements, HAM tools were used to simulate indoor air conditions. Results showed a good agreement between simulated and experimental air temperature results, and that other building construction parameters, such as the use of permeable coverings, may have a large impact on indoor thermal conditions and energy consumption. [Copyright &y& Elsevier]