Search

Microalgae-based bioenergy has been long considered as a promising substitute to replace the fossil fuels at large-scale. After the decades of research, several bottlenecks remain to be overcome to make the large-scale production of microalgal bioenergy commercially viable. In this review, the bottlenecks that restrict the commercial production of microalgal bioenergy are summarized as “high cost” and “low efficiency” and then identified in detailed categories. Several solutions which aim to solve the bottlenecks are presented and discussed correspondingly. The solutions presented in this review including cultivating in wastewater, recycling water and nutrients, utilizing the whole biomass, selecting indigenous strains, cultivating mixed-species, supplementing low-cost organic substrates, mixing vertically in reactor, optimizing metabolic pathway and attaching the cells on suspended-solids. Furthermore, a novel system integrated with the solutions, which is combined with the wastewater treatment system and characterized as the mixed-species cultivation of wild-selected mixotrophic microalgal strains in suspended-solid phase bioreactor based on low-cost substrate, is proposed to promote the scale-up of the microalgal cultivation for bioenergy production. [ABSTRACT FROM AUTHOR]

Attached microalgae cultivation could simplify the microalgae harvest process and reduce its associated cost, which has attracted much attention recently. In this paper, the reactor patterns, advantages, microalgae biomass productivity, influencing factors and the microalgae physicochemical properties in the attached microalgae cultivation was summarized to show the sketch of this novel microalgae cultivation. It was concluded that the attached microalgae cultivation is advantageous in achieving less water and space consumption, higher water treatment potential and higher biomass productivity compared with the traditional suspended microalgae cultivation. The accumulation of the attached microalgae biomass showed a linear increase with culture time with the largest productivity up to 20.7 g m −2 d −1 . Chlorella and Scenedesmus were the top two species that have been studied in attached culture system. Cellulose acetate/nitrate membrane, polycarbonate membrane and cotton were the most popular materials used owing to their high hydrophilicity and wide availability. Flow rate, nutrients, light, CO 2 and other factors could affect the attached microalgae productivity and the physicochemical property in a way different from the suspended microalgae, which were described in detail in this review. At last, some technical bottlenecks and the corresponding solvents in the attached microalgae were suggested. [ABSTRACT FROM AUTHOR]

Nowadays, microalgae-based bioenergy has been commonly considered as a potential substitute of the non-renewable traditional energy resources with increasing attention. Nevertheless, microalgal cells will secrete/release some Soluble Algal Products (SAPs) into the culture medium during microalgal biomass cultivation. Studies on the influences, especially the negative ones, of SAPs in large-scale cultivation of microalgae for biomass/bioenergy production remain limited. The negative effects, properties, production and treatments of SAPs were therefore investigated and summarized in this paper. It was found that SAPs may inhibit microalgal growth, raise the cost of microalgal recovery and lower the performance of the downstream discharged water treatment process after microalgal cultivation, among others. The production of SAPs could be as high as 70 mg/L in terms of dissolved organic carbon (DOC), causing substantial environmental issues. The chemical properties of SAPs significantly varied among different microalgal species, growth phases and nutrient concentrations. The distribution of molecular weight of SAPs varied from less than 1 kDa to more than 100 kDa, meanwhile the hydrophilic/hydrophobic property of SAPs showed a consistency. All studies showed that more than 60% of SAPs are hydrophilic. After comparing three different SAPs treatment methods, it was concluded that biodegradation could be a feasible and economical process to remove SAPs based on the properties of SAPs. The mechanisms of SAPs formation and the mitigation of their undesirable effects are still not clear. Therefore, a systematic and deep study on those topics is urgently needed. [ABSTRACT FROM AUTHOR]

Abstract: Using wastewater as resource for microalgal cultivation was seriously considered as a promising approach for sustainable biomass and lipid production. The proper selection of microalgal species is the foundation and key point to achieve this objective. This paper reviewed the recent status of microalgal cultivation in wastewater, including the characteristics of microalgal species used in recent studies, the performance of different microalgal species in different types of wastewater, the commonly-used isolation methods of microalgal species adaptable to the growth in wastewater, and the evaluation criteria of microalgal species. It was found that microalgal biomass and lipid production in wastewater were comparable to those in artificial culture medium, although most of the data was obtained in sterilized wastewater. Among all microalgal species involved in this review, Botryococcus braunii, Chlorella pyrenoidosa and Chlamydomonas reinhardtii showed superior performance in certain studies. However, no microalgal species has been demonstrated to meet all the requirements for large-scale biomass production in wastewater. Thus, the efforts on microalgal species isolation and characterization should still be promoted. On the basis of all the information, this review explored the limitations of recent studies and future research needs on this topic. [Copyright &y& Elsevier]