Search

Active and passive microwave signals over land co-vary depending on their shared scattering and emission characteristics by soil and vegetation media. Estimates of this covariation can be used beneficially to downscale coarse-resolution brightness temperatures with high-resolution backscatter for enhanced-resolution Earth observations. In this study, a forward model of covariation for vegetated soil is derived by combining two well-established models of active and passive microwave interactions. The covariation model is inverted to obtain a single-pass observation-driven estimation of active-passive microwave covariation (β) based on multi-channel radiometer and Synthetic Aperture Radar (SAR) scenes. A key feature of the estimation approach is that it is applicable to co-located spatial data scenes and does not rely on temporal information. We present applications of the estimation with combinations of SMAP (L-band) radiometry and both SMAP (L-band) and multi-angular Sentinel-1 (C-band) backscatter data. We first show that for the period of available SMAP L-band radiometer and radar data, the estimation approach for β , introduced in this study, yields similar results as the statistical time-series approach originally designed for SMAP. The new single-pass approach also allows estimation of active-passive covariation where the statistical approach cannot be applied because dynamic range of brightness temperature and backscatter are too limited to allow regression. We then apply the developed estimation method to SMAP L-band radiometer and multi-angular Sentinel-1 C-band SAR data. Here, the study quantifies the effects of microwave frequency and look-angles on the covariation by applying the estimation globally and analyzing the results as a function of vegetation cover – a key determinant of the strength of the covariation. • A single-pass estimation of active-passive microwave covariation is established. • The approach allows estimation of covariation without the need for time series. • It is observation-driven and does not require site-specific calibration. • It enables global downscaling of SMAP radiometer with Sentinel-1 radar data. [ABSTRACT FROM AUTHOR]

Soil Moisture Active Passive (SMAP) mission of NASA was launched in January 2015. Currently, SMAP has an L-band radiometer and a defunct L-band radar with a rotating 6-m mesh reflector antenna. On July 7th, 2015, the SMAP radar malfunctioned and became inoperable. Consequently, the production of high-resolution active-passive soil moisture product got hampered, and only ~2.5 months (April 15th, 2015 to July 7th, 2015) of data remain available. Therefore, during the SMAP post-radar phase, many ways were examined to restart the high-resolution soil moisture product generation of the SMAP mission. One of the feasible approaches was to substitute the SMAP radar with other available SAR data. Sentinel-1A/Sentinel-1B SAR data was found most suitable for combining with the SMAP radiometer data because of its nearly similar orbit configuration that allows overlapping of their swaths with a minimal time difference, a key feature/requirement for the SMAP active-passive algorithm. The Sentinel interferometric wide swath (IW) mode acquisition also provides the co-polarized and cross-polarized observations required for the SMAP active-passive algorithm. However, some differences do exist between the SMAP and Sentinel SAR data. They are mainly: 1) Sentinel has a C-band SAR whereas SMAP operates at L-band; 2) Sentinel has multiple incidence angles within its swath, and SMAP has one single incidence angle; and 3) Sentinel 1A/B Interferometric Wide (IW) swath width is ~250 km as compared to SMAP with 1000 km swath width. On any given day, the narrow swath width of the Sentinel observations significantly reduces the overlap spatial coverage between SMAP and Sentinel as compared to the original SMAP radar and radiometer swath coverage. Hence, the temporal resolution (revisit interval) suffers due to narrow overlapped swath width and degrades from 3 days to 12 days. One advantage of using very high-resolution resolution Sentinel-1A/Sentinel-1B data in the SMAP active-passive algorithm is the potential of obtaining the disaggregated brightness temperature and thus soil moisture at a much finer spatial resolution of 3 km and 1 km at global extent. The assessment of high-resolution product at 3 km and 1 km using the soil moisture calibration and validations sites shows reasonable accuracy of ~0.05 m3/m3. The SMAP-Sentinel1 active-passive high-resolution product is now available to the public (new version released in October 2018) through NSIDC (NASA DAAC). The duration of this product is from April 2015 to current date. • The article is about the high resolution (1 km and 3 km) soil moisture data from the SMAP mission. • The soil moisture is produced using the SMAP L-band TB and Sentinel 1A/B C-band Sigma0. • The high resolution soil moisture has reasonable accuracy (RMSE) of ~0.05 m3/m3. • The SMAP-Sentinel1 high resolution soil moisture product is ready for geophysical applications. • The temporal frequency of the this product is ~12 days, however, in Europe it is 6 days. [ABSTRACT FROM AUTHOR]