Search

Accurately estimating vegetation biomass in urban forested areas is of great interest to researchers as it is a key indicator of the carbon sequestration capacity necessary for cities to achieve carbon neutrality. The emerging vegetation biomass estimation methods that use AI technologies with remote sensing images often suffer from arge estimating errors due to the diversity of vegetation and the complex three-dimensional terrain environment in urban ares. However, the high resolution of Light Detection and Ranging (i.e., LiDAR) data provides an opportunity to accurately describe the complex 3D scenes of urban forests, thereby improving estimation accuracy. Additionally, deep earning foundation models have widely succeeded in the industry, and show great potential promise to estimate vegetation biomass through processing complex and arge amounts of urban LiDAR data efficiently and accurately. In this study, we propose an efficient and accurate method called 3D-CiLBE (3DCity Long-term Biomass Estimation) to estimate urban vegetation biomass by utilizing advanced deep earning foundation models. In the 3D-CiLBE method, the Segment Anything Model (i.e., SAM) was used to segment single wood information from a arge amount of complex urban LiDAR data. Then, we modified the Contrastive Language–Image Pre-training (i.e., CLIP) model to identify the species of the wood so that the classic anisotropic growth equation can be used to estimate biomass. Finally, we utilized the Informer model to predict the biomass in the ong term. We evaluate it in eight urban areas across the United States. In the task of identifying urban greening areas, the 3D-CiLBE achieves optimal performance with a mean Intersection over Union (i.e., mIoU) of 0.94. Additionally, for vegetation classification, 3D-CiLBE achieves an optimal recognition accuracy of 92.72%. The estimation of urban vegetation biomass using 3D-CiLBE achieves a Mean Square Error of 0.045 kg/m2, reducing the error by up to 8.2% compared to 2D methods. The MSE for biomass prediction by 3D-CiLBE was 0.06kg/m2 smaller on average than the inear regression model. Therefore, the experimental results indicate that the 3D-CiLBE method can accurately estimate urban vegetation biomass and has potential for practical application. [ABSTRACT FROM AUTHOR]

Monitoring atmospheric concentrations of greenhouse gases (GHGs) like carbon dioxide and methane in near real time and with good spatial resolution is crucial for enhancing our understanding of the sources and sinks of these gases. A novel approach can be proposed using a constellation of small satellites equipped with miniaturized spectrometers having a spectral resolution of a few nanometers. The objective of this study is to describe expected results that can be obtained with a single satellite named Uvsq-Sat NG. The SolAtmos end-to-end simulator and its three tools (IRIS, OptiSpectra, and GHGRetrieval) were developed to evaluate the performance of the spectrometer of the Uvsq-Sat NG mission, which focuses on measuring the main GHGs. The IRIS tool was implemented to provide Top-Of-Atmosphere (TOA) spectral radiances. Four scenes were analyzed (pine forest, deciduous forest, ocean, snow) combined with different aerosol types (continental, desert, maritime, urban). Simulated radiance spectra were calculated based on the wavelength ranges of the Uvsq-Sat NG, which spans from 1200 to 2000 nm. The OptiSpectra tool was used to determine optimal observational settings for the spectrometer, including Signal-to-Noise Ratio (SNR) and integration time. Data derived from IRIS and OptiSpectra served as input for our GHGRetrieval simulation tool, developed to provide greenhouse gas concentrations. The Levenberg–Marquardt algorithm was applied iteratively to fine-tune gas concentrations and model inputs, aligning observed transmittance functions with simulated ones under given environmental conditions. To estimate gas concentrations (CO2, CH4, O2, H2O) and their uncertainties, the Monte Carlo method was used. Based on this analysis, this study demonstrates that a miniaturized spectrometer onboard Uvsq-Sat NG is capable of observing different scenes by adjusting its integration time according to the wavelength. The expected precision for each measurement is of the order of a few ppm for carbon dioxide and less than 25 ppb for methane. [ABSTRACT FROM AUTHOR]

Urban vegetation growth is vital for developing sustainable and liveable cities in the contemporary era since it directly helps people’s health and well-being. Estimating vegetation cover and biomass is commonly done by calculating various vegetation indices for automated urban vegetation management and monitoring. However, most of these indices fail to capture robust estimation of vegetation cover due to their inherent focus on colour attributes with limited viewpoint and ignore seasonal changes. To solve this limitation, this article proposed a novel vegetation index called the Multiview Semantic Vegetation Index (MSVI), which is robust to color, viewpoint, and seasonal variations. Moreover, it can be applied directly to RGB images. This Multiview Semantic Vegetation Index (MSVI) is based on deep semantic segmentation and multiview field coverage and can be integrated into any vegetation management platform. This index has been tested on Google Street View (GSV) imagery of Wyndham City Council, Melbourne, Australia. The experiments and training achieved an overall pixel accuracy of 89.4% and 92.4% for FCN and U-Net, respectively. Thus, the MSVI can be a helpful instrument for analysing urban forestry and vegetation biomass since it provides an accurate and reliable objective method for assessing the plant cover at street level.

We develop a method based on computer vision and a hierarchical multilevel model to derive an Urban Street Tree Vegetation Index which aims to quantify the amount of vegetation visible from the point of view of a pedestrian. Our approach unfolds in two steps. First, areas of vegetation are detected within street-level imagery using a state-of-the-art deep neural network model. Second, information is combined from several images to derive an aggregated indicator at the area level using a hierarchical multilevel model. The comparative performance of our proposed approach is demonstrated against a widely used image segmentation technique based on a pre-labelled dataset. The approach is deployed to a real-world scenario for the city of Cardiff, Wales, using Google Street View imagery. Based on more than 200,000 street-level images, an urban tree street-level indicator is derived to measure the spatial distribution of tree cover, accounting for the presence of obstructing objects present in images at the Lower Layer Super Output Area (LSOA) level, corresponding to the most commonly used administrative areas for policy-making in the United Kingdom. The results show a high degree of correspondence between our tree street-level score and aerial tree cover estimates. They also evidence more accurate estimates at a pedestrian perspective from our tree score by more appropriately capturing tree cover in areas with large burial, woodland, formal open and informal open spaces where shallow trees are abundant, in high density residential areas with backyard trees, and along street networks with high density of high trees. The proposed approach is scalable and automatable. It can be applied to cities across the world and provides robust estimates of urban trees to advance our understanding of the link between mental health, well-being, green space and air pollution.

Quantification of biophysical parameters of urban trees is important for urban planning, and for assessing carbon sequestration and ecosystem services. Airborne lidar has been used extensively in recent years to estimate biophysical parameters of trees in forested ecosystems. However, similar studies are largely lacking for individual trees in urban landscapes. Prediction models to estimate biophysical parameters such as height, crown area, diameter at breast height, and biomass for over two thousand individual trees were developed using best subsets multiple linear regression for a study area in central Oklahoma, USA using point cloud distributional metrics from an Optech ALTM 2050 lidar system. A high level of accuracy was attained for estimating individual tree height (R2 = 0.89), dbh (R2 = 0.82), crown diameter (R2 = 0.90), and biomass (R2 = 0.67) using lidar-based metrics for pooled data of all tree species. More variance was explained in species-specific estimates of biomass (R2 = 0.68 for Juniperus virginiana to 0.84 for Ulmus parviflora) than in estimates from broadleaf deciduous (R2 = 0.63) and coniferous (R2 = 0.45) taxonomic groups—or the data set analysed as a whole (R2 = 0.67). The metric crown area performed particularly well for most of the species-specific biomass equations, which suggests that tree crowns should be delineated accurately, whether manually or using automatic individual tree detection algorithms, to obtain a good estimation of biomass using lidar-based metrics.

Accurately mapping urban vegetation carbon density is challenging because of complex landscapes and mixed pixels. In this study, a novel methodology was proposed that combines a linear spectral unmixing analysis (LSUA) with a linear stepwise regression (LSR), a logistic model-based stepwise regression (LMSR) and k-Nearest Neighbors (kNN), to map the forest carbon density of Shenzhen City of China, using Landsat 8 imagery and sample plot data collected in 2014. The independent variables that contributed to statistically significantly improving the fit of a model to data and reducing the sum of squared errors were first selected from a total of 284 spectral variables derived from the image bands. The vegetation fraction from LSUA was then added as an independent variable. The results obtained using cross-validation showed that: (1) Compared to the methods without the vegetation information, adding the vegetation fraction increased the accuracy of mapping carbon density by 1%-9.3%; (2) As the observed values increased, the LSR and kNN residuals showed overestimates and underestimates for the smaller and larger observations, respectively, while LMSR improved the systematical over and underestimations; (3) LSR resulted in illogically negative and unreasonably large estimates, while KNN produced the greatest values of root mean square error (RMSE). The results indicate that combining the spatial modeling method LMSR and the spectral unmixing analysis LUSA, coupled with Landsat imagery, is most promising for increasing the accuracy of urban forest carbon density maps. In addition, this method has considerable potential for accurate, rapid and nondestructive prediction of urban and peri-urban forest carbon stocks with an acceptable level of error and low cost. [ABSTRACT FROM AUTHOR]

The objective of this study is to develop new algorithms for automated urban forest inventory at the individual tree level using LiDAR point cloud data. LiDAR data contain three-dimensional structure information that can be used to estimate tree height, base height, crown depth, and crown diameter. This allows precision urban forest inventory down to individual trees. Unlike most of the published algorithms that detect individual trees from a LiDAR-derived raster surface, we worked directly with the LiDAR point cloud data to separate individual trees and estimate tree metrics. Testing results in typical urban forests are encouraging. Future works will be oriented to synergize LiDAR data and optical imagery for urban tree characterization through data fusion techniques. [ABSTRACT FROM AUTHOR]

As an important component of urban vegetation, street trees play an important role in maintenance of environmental quality, aesthetic beauty of urban landscape, and social service for inhabitants. Acquiring accurate and up-to-date inventory information for street trees is required for urban horticultural planning, and municipal urban forest management. This paper presents a new Voxel-based Marked Neighborhood Searching (VMNS) method for efficiently identifying street trees and deriving their morphological parameters from Mobile Laser Scanning (MLS) point cloud data. The VMNS method consists of six technical components: voxelization, calculating values of voxels, searching and marking neighborhoods, extracting potential trees, deriving morphological parameters, and eliminating pole-like objects other than trees. The method is validated and evaluated through two case studies. The evaluation results show that the completeness and correctness of our method for street tree detection are over 98%. The derived morphological parameters, including tree height, crown diameter, diameter at breast height (DBH), and crown base height (CBH), are in a good agreement with the field measurements. Our method provides an effective tool for extracting various morphological parameters for individual street trees from MLS point cloud data. [ABSTRACT FROM AUTHOR]

Quantification of biophysical parameters of urban trees is important for urban planning, and for assessing carbon sequestration and ecosystem services. Airborne lidar has been used extensively in recent years to estimate biophysical parameters of trees in forested ecosystems. However, similar studies are largely lacking for individual trees in urban landscapes. Prediction models to estimate biophysical parameters such as height, crown area, diameter at breast height, and biomass for over two thousand individual trees were developed using best subsets multiple linear regression for a study area in central Oklahoma, USA using point cloud distributional metrics from an Optech ALTM 2050 lidar system. A high level of accuracy was attained for estimating individual tree height (R² = 0.89), dbh (R² = 0.82), crown diameter (R² = 0.90), and biomass (R² = 0.67) using lidar-based metrics for pooled data of all tree species. More variance was explained in species-specific estimates of biomass (R² = 0.68 for Juniperus virginiana to 0.84 for Ulmus parviflora) than in estimates from broadleaf deciduous (R² = 0.63) and coniferous (R² = 0.45) taxonomic groups—or the data set analysed as a whole (R² = 0.67). The metric crown area performed particularly well for most of the species-specific biomass equations, which suggests that tree crowns should be delineated accurately, whether manually or using automatic individual tree detection algorithms, to obtain a good estimation of biomass using lidar-based metrics. [ABSTRACT FROM AUTHOR]

We present the point cloud slicing (PCS) algorithm, to post process point cloud data (PCD) from terrestrial laser scanning (TLS). We then test this tool for forest inventory application in urban heterogeneous forests. The methodology was based on a voxel data structure derived from TLS PCD. We retrieved biophysical tree parameters including diameter at breast height (DBH), tree height, basal area, and volume. Our results showed that TLS-based metrics explained 91.17% (RMSE = 9.1739 cm, p < 0.001) of the variation in DBH at individual tree level. Though the scanner generated a high-density PCD, only 57.27% (RMSE = 0.7543 m, p < 0.001) accuracy was achieved for predicting tree heights in these very heterogeneous stands. Furthermore, we developed a voxel-based TLS volume estimation method. Our results showed that PCD generated from TLS single location scans only captures 18% of the total tree volume due to an occlusion effect; yet there are significant relationships between the TLS data and field measured parameters for DBH and height, giving promise to the utility of a side scanning approach. Using our method, a terrestrial LiDAR-based inventory, also applicable to mobile- or vehicle-based laser scanning (MLS or VLS), was produced for future calibration of Aerial Laser Scanning (ALS) data and urban forest canopy assessments. [ABSTRACT FROM AUTHOR]

The increasing availability and variety of global satellite products provide a new level of data with different spatial, temporal, and spectral resolutions; however, identifying the most suited resolution for a specific application consumes increasingly more time and computation effort. The region's cloud coverage additionally influences the choice of the best trade-off between spatial and temporal resolution, and different pixel sizes of remote sensing (RS) data may hinder the accurate monitoring of different land cover (LC) classes such as agriculture, forest, grassland, water, urban, and natural-seminatural. To investigate the importance of RS data for these LC classes, the present study fuses NDVIs of two high spatial resolution data (high pair) (Landsat (30 m, 16 days; L) and Sentinel-2 (10 m, 5–6 days; S), with four low spatial resolution data (low pair) (MOD13Q1 (250 m, 16 days), MCD43A4 (500 m, one day), MOD09GQ (250 m, one-day), and MOD09Q1 (250 m, eight day)) using the spatial and temporal adaptive reflectance fusion model (STARFM), which fills regions' cloud or shadow gaps without losing spatial information. These eight synthetic NDVI STARFM products (2: high pair multiply 4: low pair) offer a spatial resolution of 10 or 30 m and temporal resolution of 1, 8, or 16 days for the entire state of Bavaria (Germany) in 2019. Due to their higher revisit frequency and more cloud and shadow-free scenes (S = 13, L = 9), Sentinel-2 (overall R2 = 0.71, and RMSE = 0.11) synthetic NDVI products provide more accurate results than Landsat (overall R2 = 0.61, and RMSE = 0.13). Likewise, for the agriculture class, synthetic products obtained using Sentinel-2 resulted in higher accuracy than Landsat except for L-MOD13Q1 (R2 = 0.62, RMSE = 0.11), resulting in similar accuracy preciseness as S-MOD13Q1 (R2 = 0.68, RMSE = 0.13). Similarly, comparing L-MOD13Q1 (R2 = 0.60, RMSE = 0.05) and S-MOD13Q1 (R2 = 0.52, RMSE = 0.09) for the forest class, the former resulted in higher accuracy and precision than the latter. Conclusively, both L-MOD13Q1 and S-MOD13Q1 are suitable for agricultural and forest monitoring; however, the spatial resolution of 30 m and low storage capacity makes L-MOD13Q1 more prominent and faster than that of S-MOD13Q1 with the 10-m spatial resolution. [ABSTRACT FROM AUTHOR]

Urban vegetation growth is vital for developing sustainable and liveable cities in the contemporary era since it directly helps people's health and well-being. Estimating vegetation cover and biomass is commonly done by calculating various vegetation indices for automated urban vegetation management and monitoring. However, most of these indices fail to capture robust estimation of vegetation cover due to their inherent focus on colour attributes with limited viewpoint and ignore seasonal changes. To solve this limitation, this article proposed a novel vegetation index called the Multiview Semantic Vegetation Index (MSVI), which is robust to color, viewpoint, and seasonal variations. Moreover, it can be applied directly to RGB images. This Multiview Semantic Vegetation Index (MSVI) is based on deep semantic segmentation and multiview field coverage and can be integrated into any vegetation management platform. This index has been tested on Google Street View (GSV) imagery of Wyndham City Council, Melbourne, Australia. The experiments and training achieved an overall pixel accuracy of 89.4% and 92.4% for FCN and U-Net, respectively. Thus, the MSVI can be a helpful instrument for analysing urban forestry and vegetation biomass since it provides an accurate and reliable objective method for assessing the plant cover at street level. [ABSTRACT FROM AUTHOR]

Urban trees and forests provide multiple ecosystem services (ES), including temperature regulation, carbon sequestration, and biodiversity. Interest in ES has increased amongst policymakers, scientists, and citizens given the extent and growth of urbanized areas globally. However, the methods and techniques used to properly assess biodiversity and ES provided by vegetation in urban environments, at large scales, are insufficient. Individual tree identification and characterization are some of the most critical issues used to evaluate urban biodiversity and ES, given the complex spatial distribution of vegetation in urban areas and the scarcity or complete lack of systematized urban tree inventories at large scales, e.g., at the regional or national levels. This often limits our knowledge on their contributions toward shaping biodiversity and ES in urban areas worldwide. This paper provides an analysis of the state-of-the-art studies and was carried out based on a systematic review of 48 scientific papers published during the last five years (2016–2020), related to urban tree and greenery characterization, remote sensing techniques for tree identification, processing methods, and data analysis to classify and segment trees. In particular, we focused on urban tree and forest characterization using remotely sensed data and identified frontiers in scientific knowledge that may be expanded with new developments in the near future. We found advantages and limitations associated with both data sources and processing methods, from which we drew recommendations for further development of tree inventory and characterization in urban forestry science. Finally, a critical discussion on the current state of the methods, as well as on the challenges and directions for future research, is presented. [ABSTRACT FROM AUTHOR]

The ability of deep convolutional neural networks (deep learning) to learn complex visual characteristics offers a new method to classify tree species using lower-cost data such as regional aerial RGB imagery. In this study, we use 10 cm resolution imagery and 4600 trees to develop a deep learning model to identify Metrosideros excelsa (pōhutukawa)—a culturally important New Zealand tree that displays distinctive red flowers during summer and is under threat from the invasive pathogen Austropuccinia psidii (myrtle rust). Our objectives were to compare the accuracy of deep learning models that could learn the distinctive visual characteristics of the canopies with tree-based models (XGBoost) that used spectral and textural metrics. We tested whether the phenology of pōhutukawa could be used to enhance classification by using multitemporal aerial imagery that showed the same trees with and without widespread flowering. The XGBoost model achieved an accuracy of 86.7% on the dataset with strong phenology (flowering). Without phenology, the accuracy fell to 79.4% and the model relied on the blueish hue and texture of the canopies. The deep learning model achieved 97.4% accuracy with 96.5% sensitivity and 98.3% specificity when leveraging phenology—even though the intensity of flowering varied substantially. Without strong phenology, the accuracy of the deep learning model remained high at 92.7% with sensitivity of 91.2% and specificity of 94.3% despite significant variation in the appearance of non-flowering pōhutukawa. Pooling time-series imagery did not enhance either approach. The accuracy of XGBoost and deep learning models were, respectively, 83.2% and 95.2%, which were of intermediate precision between the separate models. [ABSTRACT FROM AUTHOR]

Land use change has an important influence on the spatial and temporal distribution of PM2.5 concentration. Therefore, based on the particulate matter (PM2.5) data from remote sensing instruments and land use change data in long time series, the Getis-Ord Gi* statistic and SP-SDM are employed to analyze the spatial distribution pattern of PM2.5 and its response to land use change in China. It is found that the average PM2.5 increased from 25.49 μg/m3 to 31.23 μg/m3 during 2000-2016, showing an annual average growth rate of 0.97%. It is still greater than 35 μg/m3 in nearly half of all cities. The spatial distribution pattern of PM2.5 presents the characteristics of concentrated regional convergence. PM2.5 is positively correlated with urban land and farmland, negatively correlated with forest land, grassland, and unused land. Furthermore, the average PM2.5 concentrations show the highest values for urban land and decrease in the order of farmland > unused land > water body > forest > grassland. The impact of land use change on PM2.5 is a non-linear process, and there are obvious differences and spillover effects for different land types. Thus, reasonably controlling the scale of urban land and farmland, optimizing the spatial distribution pattern and development intensity, and expanding forest land and grassland are conducive to curbing PM2.5 pollution. The research conclusions provide a theoretical basis for the management of PM2.5 pollution from the perspective of optimizing land use. [ABSTRACT FROM AUTHOR]

Colorado's water supply is under threat due to climate change pressures and population growth, however Colorado has been recognized to have some of the most progressive water conservation programs in the country. Limiting outdoor water consumption is an increasingly popular approach to conserving water in semi-arid cities, yet in order to implement effective water reduction and conservation policies, more utilities and city managers need a firm understanding of the local drivers of outdoor water consumption. This research explores the drivers of outdoor water consumption in a semi-arid, medium-sized Colorado city that is projected to undergo significant population growth. We used a combination of correlation and linear regression analyses to identify the key descriptive variables that predict greater water consumption at the household scale. Some results were specific to the development patterns of this medium-sized city, where outdoor water use increased 7% for each additional mile (1.6 km) a household was located from the historic urban center. Similarly, more expensive homes used more water as well. Surprisingly, households with a higher ratio of vegetation cover to parcel size tended toward less water consumption. This result could be because parcels that are shaded by their tree canopy require less irrigation. We discuss these results to assist city managers and policymakers in creating water-efficient landscapes and provide information that can be leveraged to increase awareness for water conservation in a growing, semi-arid city. [ABSTRACT FROM AUTHOR]

Accurately identifying and delineating urban boundaries are the premise for and foundation of the control of disorderly urban sprawl, which is helpful for us to accurately grasp the scale and form of cities, optimize the internal spatial structure and pattern of cities, and guide the expansion of urban spaces in the future. At present, the concept and delineation of urban boundaries do not follow a unified method or standard. However, many scholars have made use of multi-source remote sensing images of various scales and social auxiliary data such as point of interest (POI) data to achieve large-scale, high-resolution, and high-precision land cover mapping and impermeable water surface mapping. The accuracy of small- and medium-scale urban boundary mapping has not been improved to an obvious extent. This study uses multi-temporal Sentinel-2 high-resolution images and POI data that can reflect detailed features of human activities to extract multi-dimensional features and use random forests and mathematical morphology to map the urban boundaries of the city of Zhengzhou. The research results show that: (1) the urban construction land extraction model established with multi-dimensional features has a great improvement in accuracy; (2) when the training sample accounts for 65% of the sample data set, the urban construction land extraction model has the highest accuracy, reaching 96.25%, and the Kappa coefficient is 0.93; (3) the optimized boundary of structural elements with a size of 13 × 13 is selected, which is in good agreement in terms of scope and location with the boundary of FROM-GLC10 (Zhengzhou) and visual interpretations. The results from the urban boundary delineation in this paper can be used as an important database for detailed basic land use mapping within cities. Moreover, the method in this paper has some reference value for other cities in terms of delineating urban boundaries. [ABSTRACT FROM AUTHOR]

Urban trees provide social, economic, environmental and ecosystem services benefits that improve the liveability of cities and contribute to individual and community wellbeing. There is thus a need for effective mapping, monitoring and maintenance of urban trees. Remote sensing technologies can effectively map and monitor urban tree coverage and changes over time as an efficient and low-cost alternative to field-based measurements, which are time consuming and costly. Automatic extraction of urban land cover features with high accuracy is a challenging task, and it demands object based artificial intelligence workflows for efficiency and thematic accuracy. The aim of this research is to effectively map urban tree cover changes and model the relationship of such changes with socioeconomic variables. The object-based convolutional neural network (CNN) method is illustrated by mapping urban tree cover changes between 2005 and 2015/16 using satellite, Google Earth imageries and Light Detection and Ranging (LiDAR) datasets. The training sample for CNN model was generated by Object Based Image Analysis (OBIA) using thresholds in a Canopy Height Model (CHM) and the Normalised Difference Vegetation Index (NDVI). The tree heatmap produced from the CNN model was further refined using OBIA. Tree cover loss, gain and persistence was extracted, and multiple regression analysis was applied to model the relationship with socioeconomic variables. The overall accuracy and kappa coefficient of tree cover extraction was 96% and 0.77 for 2005 images and 98% and 0.93 for 2015/16 images, indicating that the object-based CNN technique can be effectively implemented for urban tree coverage mapping and monitoring. There was a decline in tree coverage in all suburbs. Mean parcel size and median household income were significantly related to tree cover loss (R2 = 58.5%). Tree cover gain and persistence had positive relationship with tertiary education, parcel size and ownership change (gain: R2 = 67.8% and persistence: R2 = 75.3%). The research findings demonstrated that remote sensing data with intelligent processing can contribute to the development of policy input for management of tree coverage in cities. [ABSTRACT FROM AUTHOR]

Cities, the core of the global climate change and economic development, are high impact land cover land use change (LCLUC) hotspots. Comprehensive records of land cover land use dynamics in urban regions are essential for strategic climate change adaption and mitigation and sustainable urban development. This study aims to develop a Google Earth Engine (GEE) application for high-resolution (15-m) urban LCLUC mapping with a novel classification scheme using pan-sharpened Landsat images. With this approach, we quantified the annual LCLUC in Changchun, China, from 2000 to 2019, and detected the abrupt changes (turning points of LCLUC). Ancillary data on social-economic status were used to provide insights on potential drivers of LCLUC by examining their correlation with change rate. We also examined the impacts of LCLUC on environment, specifically air pollution. Using this approach, we can classify annual LCLUC in Changchun with high accuracy (all above 0.91). The change detection based on the high-resolution wall-to-wall maps show intensive urban expansion with the compromise of cropland from 2000 to 2019. We also found the growth of green space in urban regions as the result of green space development and management in recent years. The changing rate of different land types were the largest in the early years of the observation period. Turning points of land types were primarily observed in 2009 and 2010. Further analysis showed that economic and industry development and population migration collectively drove the urban expansion in Changchun. Increasing built-up areas could slow wind velocity and air exchange, and ultimately led to the accumulation of PM2.5. Our implement of pan-sharpened Landsat images facilitates the wall-to-wall mapping of temporal land dynamics at high spatial resolution. The primary use of GEE for mapping urban land makes it replicable and transferable by other users. This approach is a first crucial step towards understanding the drivers of change and supporting better decision-making for sustainable urban development and climate change mitigation. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) imaging systems derive microwave data, from space or airborne (piloted and remote piloted), that provide opportunities for the interpretation of many characteristics of the terrain surface. The increasing number of satellites equipped with SAR data acquisition systems that are being launched with a range of wavelengths, polarizations, and operating characteristics are enabling a better understanding of the earth's environment, for such activities as vegetation analysis, forest inventories, land subsidence, and urban analysis. In addition, airborne systems for remote piloted systems and ground-based systems are available. This Special Issue presents six quality scientific papers on typical applications of SAR technologies. They include methods for the determination of above ground biomass (AGB), crop mapping using data from an advanced X-band system developed in Japan, analysis of natural and human-induced slow-rate ground deformations in the region of Campania, in Italy, the location of landslides caused by natural phenomena based on SAR images derived from the Japanese high-resolution Advanced Land Observing Satellite-2 (ALOS-2), and monitoring the size of refugee camps and their environmental impacts caused by the displacement of people from Myanmar to the Cox's Bazar District, around Kutupalong, in Bangladesh. The paper concludes with some comments on the future directions of developments in SAR systems. [ABSTRACT FROM AUTHOR]

Urban forests provide ecosystem services; tree canopy cover is the basic quantification of ecosystem services. Ground assessment of the urban forest is limited; with continued refinement, remote sensing can become an essential tool for analyzing the urban forest. This study addresses three research questions that are essential for urban forest management using remote sensing: (1) Can object-based image analysis (OBIA) and non-image classification methods (such as random point-based evaluation) accurately determine urban canopy coverage using high-spatial-resolution aerial images? (2) Is it possible to assess the impact of natural disturbances in addition to other factors (such as urban development) on urban canopy changes in the classification map created by OBIA? (3) How can we use Light Detection and Ranging (LiDAR) data and technology to extract urban canopy metrics accurately and effectively? The urban forest canopy area and location within the City of St Peter, Minnesota (MN) boundary between 1938 and 2019 were defined using both OBIA and random-point-based methods with high-spatial-resolution aerial images. Impacts of natural disasters, such as the 1998 tornado and tree diseases, on the urban canopy cover area, were examined. Finally, LiDAR data was used to determine the height, density, crown area, diameter, and volume of the urban forest canopy. Both OBIA and random-point methods gave accurate results of canopy coverages. The OBIA is relatively more time-consuming and requires specialist knowledge, whereas the random-point-based method only shows the total coverage of the classes without locational information. Canopy change caused by tornado was discernible in the canopy OBIA-based classification maps while the change due to diseases was undetectable. To accurately exact urban canopy metrics besides tree locations, dense LiDAR point cloud data collected at the leaf-on season as well as algorithms or software developed specifically for urban forest analysis using LiDAR data are needed. [ABSTRACT FROM AUTHOR]

Urban sprawl is generally defined as the urbanization of space adjacent to a city, which results from that city's development. The discussed phenomenon involves land development, mainly agricultural land, in the proximity of cities, the development of infrastructure, and an increase in the number of residents who rely on urban services and commute to work in the city. Urban sprawl generates numerous problems which, in the broadest sense, result from the difficulty in identifying the boundaries of the central urban unit and the participation of local inhabitants, regardless of their actual place of residence, in that unit's functional costs. These problems are associated not only with tax collection rights but with difficulties in measuring the extent of urban sprawl in research and local governance. The aim of this study was to analyze the applicability of the CORINE Land Cover (CLC) database for monitoring urbanization processes, including the dynamic process of urban sprawl. Polish cities with county rights, i.e., cities that implement independent spatial planning policies, were analyzed in the study to determine the pattern of urban sprawl in various types of cities. Buffer zones composed of municipalities that are directly adjacent to the central urban unit were mapped around the analyzed cities. The study proposes a novel method for measuring the extent of suburbanization with the use of the CLC database and Geographic Information System (GIS) tools. The developed method relies on the overgrowth of urbanization (OU) index calculated based on CLC data. The OU index revealed differences in the rate of urbanization in three groups of differently sized Polish cities. The analysis covered two periods: 2006–2012 and 2012–2018, and it revealed that urban sprawl in the examined cities proceeded in an unstable manner over time. The results of the present study indicate that the CLC database is a reliable source of information about urbanization processes. [ABSTRACT FROM AUTHOR]

We develop a method based on computer vision and a hierarchical multilevel model to derive an Urban Street Tree Vegetation Index which aims to quantify the amount of vegetation visible from the point of view of a pedestrian. Our approach unfolds in two steps. First, areas of vegetation are detected within street-level imagery using a state-of-the-art deep neural network model. Second, information is combined from several images to derive an aggregated indicator at the area level using a hierarchical multilevel model. The comparative performance of our proposed approach is demonstrated against a widely used image segmentation technique based on a pre-labelled dataset. The approach is deployed to a real-world scenario for the city of Cardiff, Wales, using Google Street View imagery. Based on more than 200,000 street-level images, an urban tree street-level indicator is derived to measure the spatial distribution of tree cover, accounting for the presence of obstructing objects present in images at the Lower Layer Super Output Area (LSOA) level, corresponding to the most commonly used administrative areas for policy-making in the United Kingdom. The results show a high degree of correspondence between our tree street-level score and aerial tree cover estimates. They also evidence more accurate estimates at a pedestrian perspective from our tree score by more appropriately capturing tree cover in areas with large burial, woodland, formal open and informal open spaces where shallow trees are abundant, in high density residential areas with backyard trees, and along street networks with high density of high trees. The proposed approach is scalable and automatable. It can be applied to cities across the world and provides robust estimates of urban trees to advance our understanding of the link between mental health, well-being, green space and air pollution. [ABSTRACT FROM AUTHOR]

Increasing recognition of the importance of urban forest ecosystem services calls for the sustainable management of urban forests, which requires timely and accurate information on the status, trends and interactions between socioeconomic and ecological processes pertaining to urban forests. In this regard, remote sensing, especially with its recent advances in sensors and data processing methods, has emerged as a premier and useful observational and analytical tool. This study summarises recent remote sensing applications in urban forestry from the perspective of three distinctive themes: multi-source, multi-temporal and multi-scale inputs. It reviews how different sources of remotely sensed data offer a fast, replicable and scalable way to quantify urban forest dynamics at varying spatiotemporal scales on a case-by-case basis. Combined optical imagery and LiDAR data results as the most promising among multi-source inputs; in addition, future efforts should focus on enhancing data processing efficiency. For long-term multi-temporal inputs, in the event satellite imagery is the only available data source, future work should improve haze-/cloud-removal techniques for enhancing image quality. Current attention given to multi-scale inputs remains limited; hence, future studies should be more aware of scale effects and cautiously draw conclusions. [ABSTRACT FROM AUTHOR]

The wildland-urban interface (WUI)—the area where wildland vegetation and urban buildings intermix—is at a greater risk of fire occurrence because of extensive human activity in that area. Although satellite remote sensing has become a major tool for assessing fire damage in wildlands, it is unsuitable for WUI fire monitoring due to the low spatial resolution of the images from satellites that provide frequent information which is relevant for timely fire monitoring in WUI. Here, we take advantage of frequent (i.e., ca. daily), high-spatial-resolution (3 m) imagery acquired from a constellation of nano-satellites operated by Planet Labs ("Planet") to assess fire damage to urban trees in the WUI of a Mediterranean city in Israel (Haifa). The fire occurred at the end of 2016, consuming ca. 17,000 of the trees (152 trees ha−1) within the near-by wildland and urban parts of the city. Three vegetation indices (GNDVI, NDVI and GCC) from Planet satellite images were used to derive a burn severity map for the WUI area after applying a subpixel discrimination method to distinguish between woody and herbaceous vegetation. The produced burn severity map was successfully validated with information acquired from an extensive field survey in the WUI burnt area (overall accuracy and kappa: 87% and 0.75, respectively). Planet's vegetation indices were calibrated using in-field tree measurements to obtain high spatial resolution maps of burned trees and consumed woody biomass in the WUI. These were used in conjunction with an ecosystem services valuation model (i-Tree) to estimate spatially-distributed and total economic loss due to damage to urban trees caused by the fire. Results show that nearly half of the urban trees were moderately and severely burned (26% and 22%, respectively). The total damage to the urban forest was estimated at ca. 41 ± 10 M USD. We conclude that using the method developed in this study with high-spatial-resolution Planet images has a great potential for WUI fire economic assessment. [ABSTRACT FROM AUTHOR]