Search

The plasmasphere within Earth's magnetosphere plays a crucial role in space physics, with its electron density distribution being pivotal and strongly influenced by solar activity. Very Low Frequency (VLF) waves, including whistlers, provide valuable insights into this distribution, making the study of their propagation through the plasmasphere essential for predicting space weather impacts on various technologies. In this study, we evaluate the performance of different deep learning model sizes for lightning whistler detection using the YOLO (You Only Look Once) architecture. To achieve this, we transformed the entirety of raw data from the Arase (ERG) Satellite for August 2017 into 2736 images, which were then used to train the models. Our approach involves exposing the models to spectrogram diagrams—visual representations of the frequency content of signals—derived from the Arase Satellite's WFC (WaveForm Capture) subsystem, with a focus on analyzing whistler-mode plasma waves. We experimented with various model sizes, adjusting epochs, and conducted performance analysis using a partial set of labeled data. The testing phase confirmed the effectiveness of the models, with YOLOv5n emerging as the optimal choice due to its compact size (3.7 MB) and impressive detection speed, making it suitable for resource-constrained applications. Despite challenges such as image quality and the detection of smaller whistlers, YOLOv5n demonstrated commendable accuracy in identifying scenarios with simple shapes, thereby contributing to a deeper understanding of whistlers' impact on Earth's magnetosphere and fulfilling the core objectives of this study. [ABSTRACT FROM AUTHOR]

This paper introduces a resource management approach for distributed multiple-input multiple-output (MIMO) radar systems equipped with phased array antennas. The approach focuses and adjusts narrow beams from all transmit and receive nodes to generate a regularly shaped observation area for reliable detection. Based on this, a structured early warning framework can be built by evenly arranging sufficient observation areas to cover the surveillance region and periodically scanning these areas for continuous monitoring. Observation area generation, a core technique for this framework, involves the joint optimization of beamforming weights for both transmit and receive nodes, as well as the beam dwell time. Our optimization strategy is designed to achieve two key objectives: minimizing beam dwell time to ensure rapid alerts for defense systems, and minimizing node transmit power to extend operational time while reducing the risk of intercept. To address the problem of observation area generation, we propose a two-stage method. The first stage uses the signal-to-clutter-plus-noise ratio (SCNR) as a new criterion to determine the transmit and receive beamforming weights. The second stage employs a power factor as an additional variable to scale the transmit beamforming weights under various beam dwell times, constructing a Pareto solution set for the problem. Numerical simulations validate the effectiveness of our method, demonstrating improved detection capabilities compared to monostatic phased array radar systems. [ABSTRACT FROM AUTHOR]

This paper systematically reviews remote sensing technology and learning algorithms in exploring landslides. The work is categorized into four key components: (1) literature search characteristics, (2) geographical distribution and research publication trends, (3) progress of remote sensing and learning algorithms, and (4) application of remote sensing techniques and learning models for landslide susceptibility mapping, detections, prediction, inventory and deformation monitoring, assessment, and extraction and management. The literature selections were based on keyword searches using title/abstract and keywords from Web of Science and Scopus. A total of 186 research articles published between 2011 and 2024 were critically reviewed to provide answers to research questions related to the recent advances in the use of remote sensing technologies combined with artificial intelligence (AI), machine learning (ML), and deep learning (DL) algorithms. The review revealed that these methods have high efficiency in landslide detection, prediction, monitoring, and hazard mapping. A few current issues were also identified and discussed. [ABSTRACT FROM AUTHOR]

Landslides are a widely recognized phenomenon, causing huge economic and human losses worldwide. The detection of spatial and temporal landslide deformation, together with the acquisition of precursor information, is crucial for hazard prediction and landslide risk management. Advanced landslide monitoring systems based on remote sensing techniques (RSTs) play a crucial role in risk management and provide important support for early warning systems (EWSs) at local and regional scales. The purpose of this article is to present a review of the current state of knowledge in the development of RSTs used for identifying landslide precursors, as well as detecting, monitoring, and predicting landslides. Almost 200 articles from 2010 to 2024 were analyzed, in which the authors utilized RSTs to detect potential precursors for early warning of hazards. The applications, challenges, and trends of RSTs, largely dependent on the type of landslide, deformation pattern, hazards posed by the landslide, and the size of the area of interest, were also discussed. Although the article indicates some limitations of the RSTs used so far, integrating different techniques and technological developments offers the opportunity to create reliable EWSs and improve existing ones. [ABSTRACT FROM AUTHOR]

The detection of subsurface archaeological remains using a range of remote sensing methods poses several challenges. Recent studies regarding the detection of archaeological proxies like those of cropmarks highlight the complexity of the phenomenon. In this work, we present three different methods, and associated indices, for identifying stressed reflectance signatures indicating buried archaeological remains, based on a dataset of measured ground spectroradiometric reflectance. Several spectral profiles between the visible and near-infrared parts of the spectrum were taken in a controlled environment in Cyprus during 2011–2012 and are re-used in this study. The first two (spectral) methods are based on a suitable analysis of the spectral signatures in (1) the visible part of the spectrum, in particular in the neighborhood of 570 nm, and (2) the red edge part of the spectrum, in the neighborhood of 730 nm. Machine learning (decision trees) allows for the deduction of suitable wavelengths to focus on in order to formulate the proposed indices and the associated classification criteria (decision boundaries) that can enhance the detection probability of stressed vegetation. Noise in the signal is taken into account by simulating reflectance signatures perturbed by white noise. Applying decision tree classification on the ensemble of simulations and basic statistical analysis, we refine the formulation of the indices and criteria for the noisy signatures. The success rate of the proposed methods is over 90%. The third method rests on the estimation of vegetation/canopy reflectance parameters through inversion of the physical-based PROSAIL reflectance model and the associated classification through machine learning methods. The obtained results provide further insights into the formation of stress vegetation that occurred due to the presence of shallow buried archaeological remains, which are well aligned with physical-based models and existing empirical knowledge. To the best of the authors' knowledge, this is the first study demonstrating the usefulness of radiative transfer models such as PROSAIL for understanding the formation of cropmarks. Similar studies can support future research directions towards the development of regional remote sensing methods and algorithms if systematic observations are adequately dispersed in space and time. [ABSTRACT FROM AUTHOR]

A rapid development of marine infrastructures can be observed along the global coasts. Offshore wind farms, oil and gas platforms, artificial islands, aquaculture, and more, are being constructed without a proper quantification of these human activities. Therefore, effective monitoring is required to maintain transparency towards environmental standards, marine resource management, inventorying objects, and global security. This study reviews remote sensing-based approaches to offshore infrastructure detection over the past 12 years. We analyzed 89 studies from over 30 scientific journals, highlighting spatial and temporal trends, methodological approaches, and regional and thematic research foci. Our results show a significant increase in research interest, especially since 2019. Asia, and especially China, is the predominant focus region in terms of first authorship, funding, and areas of investigation. Aquaculture is the most studied infrastructure, followed by platforms, offshore wind farms, and artificial islands. Gaofen, Sentinel, and Landsat are the most used satellite sensors for detection. The apparent shift towards automated detection methods, especially Deep Learning algorithms, reflects advances in computer vision. This study highlights the key role of earth observation in the field of off-shore infrastructure detection, which can contribute towards outlining effective monitoring practices for marine activities, as well as highlighting important knowledge gaps. [ABSTRACT FROM AUTHOR]

In the field of radar target detection, the conventional approach is to employ the range profile energy accumulation method for detecting extended targets. However, this method becomes ineffective when dealing with non-stationary and non-uniform radar clutter scenarios, as well as long-distance targets with weak radar cross sections (RCSs). In such cases, the signal-to-noise ratio (SNR) of the target echo is severely degraded, rendering the energy accumulation detection algorithm unreliable. To address this issue, this paper presents a new extended target detection method based on the maximum eigenvalue of the Hermitian matrix. This method utilizes a detection model that incorporates observed data and employs the likelihood ratio test (LRT) theory to derive the maximum eigenvalue detector at low SNR. Specifically, the detector constructs a matrix using a sliding window block with the available data and then computes the maximum eigenvalue of the covariance matrix. Subsequently, the maximum eigenvalue matrix is transformed into a one-dimensional eigenvalue image, enabling extended target detection through analogy with the energy accumulation detection method. Furthermore, this paper analyzes the proposed extended target detection method from both theoretical and experimental perspectives, validating it through field-measured data. The results obtained from the measured data demonstrate that the method effectively enhances the SNR in low SNR conditions, thereby improving target detection performance. Additionally, the method exhibits robustness across different scattering center targets. [ABSTRACT FROM AUTHOR]

The plasmasphere within Earth’s magnetosphere plays a crucial role in space physics, with its electron density distribution being pivotal and strongly influenced by solar activity. Very Low Frequency (VLF) waves, including whistlers, provide valuable insights into this distribution, making the study of their propagation through the plasmasphere essential for predicting space weather impacts on various technologies. In this study, we evaluate the performance of different deep learning model sizes for lightning whistler detection using the YOLO (You Only Look Once) architecture. To achieve this, we transformed the entirety of raw data from the Arase (ERG) Satellite for August 2017 into 2736 images, which were then used to train the models. Our approach involves exposing the models to spectrogram diagrams—visual representations of the frequency content of signals—derived from the Arase Satellite’s WFC (WaveForm Capture) subsystem, with a focus on analyzing whistler-mode plasma waves. We experimented with various model sizes, adjusting epochs, and conducted performance analysis using a partial set of labeled data. The testing phase confirmed the effectiveness of the models, with YOLOv5n emerging as the optimal choice due to its compact size (3.7 MB) and impressive detection speed, making it suitable for resource-constrained applications. Despite challenges such as image quality and the detection of smaller whistlers, YOLOv5n demonstrated commendable accuracy in identifying scenarios with simple shapes, thereby contributing to a deeper understanding of whistlers’ impact on Earth’s magnetosphere and fulfilling the core objectives of this study.

Early discovery and monitoring of the active deformation areas of potential landslides are important for geohazard risk prevention. The objective of the study is to propose a one-step strategy for automatically mapping the active deformation areas of potential landslides from a Sentinel-1 SAR dataset. First, we built a generalized convolutional neural network (CNN) based on activity and topographic characteristics. Second, we conducted a comparative analysis of the performance of various multi-channel combiners for detecting the active deformation areas of the potential landslides. Third, we verified the transferability of the pretrained CNN model for an unknown region. We found that by incorporating topographic characteristics into a generalized convolutional neural network, we were able to enhance the accuracy of identifying the active deformation areas of potential landslides, rapidly mapping these areas. The methodology is robust and efficient, and it has the capability to automatically detect the active deformation areas of potential landslides, even in unknown or unfamiliar regions. This product can facilitate automated pipelines, updating and mapping active deformation areas for final users who are not InSAR experts. This implementation can be used for providing support to risk management activities. [ABSTRACT FROM AUTHOR]

Myrtle rust is a very damaging disease, caused by the fungus Austropuccinia psidii, which has recently arrived in New Zealand and threatens the iconic tree species pōhutukawa (Metrosideros excelsa). Canopy-level hyperspectral and thermal images were taken repeatedly within a controlled environment, from 49 inoculated (MR treatment) and 26 uninoculated (control treatment) pōhutukawa plants. Measurements were taken prior to inoculation and six times post-inoculation over a 14-day period. Using indices extracted from these data, the objectives were to (i) identify the key thermal and narrow-band hyperspectral indices (NBHIs) associated with the pre-visual and early expression of myrtle rust and (ii) develop a classification model to detect the disease. The number of symptomatic plants increased rapidly from three plants at 3 days after inoculation (DAI) to all 49 MR plants at 8 DAI. NBHIs were most effective for pre-visual and early disease detection from 3 to 6 DAI, while thermal indices were more effective for detection of disease following symptom expression from 7 to 14 DAI. Using results compiled from an independent test dataset, model performance using the best thermal indices and NBHIs was excellent from 3 DAI to 6 DAI (F1 score 0.81–0.85; accuracy 73–80%) and outstanding from 7 to 14 DAI (F1 score 0.92–0.93; accuracy 89–91%). [ABSTRACT FROM AUTHOR]

The current image generative models have achieved a remarkably realistic image quality, offering numerous academic and industrial applications. However, to ensure these models are used for benign purposes, it is essential to develop tools that definitively detect whether an image has been synthetically generated. Consequently, several detectors with excellent performance in computer vision applications have been developed. However, these detectors cannot be directly applied as they areto multi-spectral satellite images, necessitating the training of new models. While two-class classifiers generally achieve high detection accuracies, they struggle to generalize to image domains and generative architectures different from those encountered during training. In this paper, we propose a one-class classifier based on Vector Quantized Variational Autoencoder 2 (VQ-VAE 2) features to overcome the limitations of two-class classifiers. We start by highlighting the generalization problem faced by binary classifiers. This was demonstrated by training and testing an EfficientNet-B4 architecture on multiple multi-spectral datasets. We then illustrate that the VQ-VAE 2-based classifier, which was trained exclusively on pristine images, could detect images from different domains and generated by architectures not encountered during training. Finally, we conducted a head-to-head comparison between the two classifiers on the same generated datasets, emphasizing the superior generalization capabilities of the VQ-VAE 2-based detector, wherewe obtained a probability of detection at a 0.05 false alarm rate of 1 for the blue and red channels when using the VQ-VAE 2-based detector, and 0.72 when we used the EfficientNet-B4 classifier. [ABSTRACT FROM AUTHOR]

This paper presents a pioneering study in the application of real-time surface landmine detection using a combination of robotics and deep learning. We introduce a novel system integrated within a demining robot, capable of detecting landmines in real time with high recall. Utilizing YOLOv8 models, we leverage both optical imaging and artificial intelligence to identify two common types of surface landmines: PFM-1 (butterfly) and PMA-2 (starfish with tripwire). Our system runs at 2 FPS on a mobile device missing at most 1.6% of targets. It demonstrates significant advancements in operational speed and autonomy, surpassing conventional methods while being compatible with other approaches like UAV. In addition to the proposed system, we release two datasets with remarkable differences in landmine and background colors, built to train and test the model performances. [ABSTRACT FROM AUTHOR]

In this research, E2YOLOX-VFL is proposed as a novel approach to address the challenges of optical image multi-scale ship detection and recognition in complex maritime and land backgrounds. Firstly, the typical anchor-free network YOLOX is utilized as the baseline network for ship detection. Secondly, the Efficient Channel Attention module is incorporated into the YOLOX Backbone network to enhance the model's capability to extract information from objects of different scales, such as large, medium, and small, thus improving ship detection performance in complex backgrounds. Thirdly, we propose the Efficient Force-IoU (EFIoU) Loss function as a replacement for the Intersection over Union (IoU) Loss, addressing the issue whereby IoU Loss only considers the intersection and union between the ground truth boxes and the predicted boxes, without taking into account the size and position of targets. This also considers the disadvantageous effects of low-quality samples, resulting in inaccuracies in measuring target similarity, and improves the regression performance of the algorithm. Fourthly, the confidence loss function is improved. Specifically, Varifocal Loss is employed instead of CE Loss, effectively handling the positive and negative sample imbalance, challenging samples, and class imbalance, enhancing the overall detection performance of the model. Then, we propose Balanced Gaussian NMS (BG-NMS) to solve the problem of missed detection caused by the occlusion of dense targets. Finally, the E2YOLOX-VFL algorithm is tested on the HRSC2016 dataset, achieving a 9.28% improvement in mAP compared to the baseline YOLOX algorithm. Moreover, the detection performance using BG-NMS is also analyzed, and the experimental results validate the effectiveness of the E2YOLOX-VFL algorithm. [ABSTRACT FROM AUTHOR]

Solar power generation has great development potential as an abundant and clean energy source. However, many factors affect the efficiency of the photovoltaic (PV) module; among these factors, outdoor PV modules are inevitably affected by stains, thus reducing the power generation efficiency of the PV panel. This paper proposes a framework for PV module stain detection based on UAV hyperspectral images (HSIs). The framework consists of two stain detection methods: constrained energy minimization (CEM)-based and orthogonal subspace projection (OSP)-based stain detection methods. Firstly, the contaminated PV modules are analyzed and processed to enhance the data's analytical capability. Secondly, based on the known spectral signature of the PV module, stain detection methods are proposed, including CEM-based stain detection and OSP-based stain detection for PV modules. The experimental results on real data illustrate that, in comparison with contrasting methods, the proposed method achieves stain detection results that closely align with known stain percentages. Additionally, it exhibits a fitting curve similar to the more maturely developed electroluminescence-based methods currently in use. [ABSTRACT FROM AUTHOR]

Owing to the significant application potential of unmanned aerial vehicles (UAVs) and infrared imaging technologies, researchers from different fields have conducted numerous experiments on aerial infrared image processing. To continuously detect small road objects 24 h/day, this study proposes an efficient Rep-style Gaussian–Wasserstein network (ERGW-net) for small road object detection in infrared aerial images. This method aims to resolve problems of small object size, low contrast, few object features, and occlusions. The ERGW-net adopts the advantages of ResNet, Inception net, and YOLOv8 networks to improve object detection efficiency and accuracy by improving the structure of the backbone, neck, and loss function. The ERGW-net was tested on a DroneVehicle dataset with a large sample size and the HIT-UAV dataset with a relatively small sample size. The results show that the detection accuracy of different road targets (e.g., pedestrians, cars, buses, and trucks) is greater than 80%, which is higher than the existing methods. [ABSTRACT FROM AUTHOR]

This paper introduces a resource management approach for distributed multiple-input multiple-output (MIMO) radar systems equipped with phased array antennas. The approach focuses and adjusts narrow beams from all transmit and receive nodes to generate a regularly shaped observation area for reliable detection. Based on this, a structured early warning framework can be built by evenly arranging sufficient observation areas to cover the surveillance region and periodically scanning these areas for continuous monitoring. Observation area generation, a core technique for this framework, involves the joint optimization of beamforming weights for both transmit and receive nodes, as well as the beam dwell time. Our optimization strategy is designed to achieve two key objectives: minimizing beam dwell time to ensure rapid alerts for defense systems, and minimizing node transmit power to extend operational time while reducing the risk of intercept. To address the problem of observation area generation, we propose a two-stage method. The first stage uses the signal-to-clutter-plus-noise ratio (SCNR) as a new criterion to determine the transmit and receive beamforming weights. The second stage employs a power factor as an additional variable to scale the transmit beamforming weights under various beam dwell times, constructing a Pareto solution set for the problem. Numerical simulations validate the effectiveness of our method, demonstrating improved detection capabilities compared to monostatic phased array radar systems.

Landslides are a widely recognized phenomenon, causing huge economic and human losses worldwide. The detection of spatial and temporal landslide deformation, together with the acquisition of precursor information, is crucial for hazard prediction and landslide risk management. Advanced landslide monitoring systems based on remote sensing techniques (RSTs) play a crucial role in risk management and provide important support for early warning systems (EWSs) at local and regional scales. The purpose of this article is to present a review of the current state of knowledge in the development of RSTs used for identifying landslide precursors, as well as detecting, monitoring, and predicting landslides. Almost 200 articles from 2010 to 2024 were analyzed, in which the authors utilized RSTs to detect potential precursors for early warning of hazards. The applications, challenges, and trends of RSTs, largely dependent on the type of landslide, deformation pattern, hazards posed by the landslide, and the size of the area of interest, were also discussed. Although the article indicates some limitations of the RSTs used so far, integrating different techniques and technological developments offers the opportunity to create reliable EWSs and improve existing ones.

Increased global dependence on Global Navigation Satellite Systems (GNSSs) has resulted in a high demand for greater precision and reliable measurements from GNSS receivers. The multipath problem is the single largest source of errors in modernised GNSSs. Double differencing techniques, such as Code Minus Carrier (CMC) have been shown to accurately detect and measure multipath, allowing for corrections to be made via Ground Base Augmentation Systems (GBAS), for example. However, these techniques require at least two receivers and the protection provided is not extended to stand-alone receivers. This paper introduces a new single differencing technique for the accurate detection of multipath in standalone GNSS receivers receiving modernised Binary Offset Carrier (BOC)-modulated signals. Similarities to CMC are drawn before the novel measurement, Code minus Subcarrier, (CMS) is characterised statistically and a threshold for multipath detection is determined. The effectiveness and sensitivity of this novel measurement as a multipath detection technique are analysed through simulation and multipath error envelope analysis. It will be shown that multipath echos capable of inducing a psuedorange error larger than the threshold are detectable at any amplitude. The method is finally verified using simulated fixed offset multipath, confirming that when code and subcarrier early–late spacings are optimal, all ranges of multipath delays, even as small as 21 meters, are detectable. This novel method of multipath detection requires no additional complex correlators than already exist in the chosen tracking algorithm, thus, providing excellent detection with minimum complexity added to the receiver structure. [ABSTRACT FROM AUTHOR]

A rapid development of marine infrastructures can be observed along the global coasts. Offshore wind farms, oil and gas platforms, artificial islands, aquaculture, and more, are being constructed without a proper quantification of these human activities. Therefore, effective monitoring is required to maintain transparency towards environmental standards, marine resource management, inventorying objects, and global security. This study reviews remote sensing-based approaches to offshore infrastructure detection over the past 12 years. We analyzed 89 studies from over 30 scientific journals, highlighting spatial and temporal trends, methodological approaches, and regional and thematic research foci. Our results show a significant increase in research interest, especially since 2019. Asia, and especially China, is the predominant focus region in terms of first authorship, funding, and areas of investigation. Aquaculture is the most studied infrastructure, followed by platforms, offshore wind farms, and artificial islands. Gaofen, Sentinel, and Landsat are the most used satellite sensors for detection. The apparent shift towards automated detection methods, especially Deep Learning algorithms, reflects advances in computer vision. This study highlights the key role of earth observation in the field of off-shore infrastructure detection, which can contribute towards outlining effective monitoring practices for marine activities, as well as highlighting important knowledge gaps.

The detection of subsurface archaeological remains using a range of remote sensing methods poses several challenges. Recent studies regarding the detection of archaeological proxies like those of cropmarks highlight the complexity of the phenomenon. In this work, we present three different methods, and associated indices, for identifying stressed reflectance signatures indicating buried archaeological remains, based on a dataset of measured ground spectroradiometric reflectance. Several spectral profiles between the visible and near-infrared parts of the spectrum were taken in a controlled environment in Cyprus during 2011–2012 and are re-used in this study. The first two (spectral) methods are based on a suitable analysis of the spectral signatures in (1) the visible part of the spectrum, in particular in the neighborhood of 570 nm, and (2) the red edge part of the spectrum, in the neighborhood of 730 nm. Machine learning (decision trees) allows for the deduction of suitable wavelengths to focus on in order to formulate the proposed indices and the associated classification criteria (decision boundaries) that can enhance the detection probability of stressed vegetation. Noise in the signal is taken into account by simulating reflectance signatures perturbed by white noise. Applying decision tree classification on the ensemble of simulations and basic statistical analysis, we refine the formulation of the indices and criteria for the noisy signatures. The success rate of the proposed methods is over 90%. The third method rests on the estimation of vegetation/canopy reflectance parameters through inversion of the physical-based PROSAIL reflectance model and the associated classification through machine learning methods. The obtained results provide further insights into the formation of stress vegetation that occurred due to the presence of shallow buried archaeological remains, which are well aligned with physical-based models and existing empirical knowledge. To the best of the authors’ knowledge, this is the first study demonstrating the usefulness of radiative transfer models such as PROSAIL for understanding the formation of cropmarks. Similar studies can support future research directions towards the development of regional remote sensing methods and algorithms if systematic observations are adequately dispersed in space and time.

In the field of radar target detection, the conventional approach is to employ the range profile energy accumulation method for detecting extended targets. However, this method becomes ineffective when dealing with non-stationary and non-uniform radar clutter scenarios, as well as long-distance targets with weak radar cross sections (RCSs). In such cases, the signal-to-noise ratio (SNR) of the target echo is severely degraded, rendering the energy accumulation detection algorithm unreliable. To address this issue, this paper presents a new extended target detection method based on the maximum eigenvalue of the Hermitian matrix. This method utilizes a detection model that incorporates observed data and employs the likelihood ratio test (LRT) theory to derive the maximum eigenvalue detector at low SNR. Specifically, the detector constructs a matrix using a sliding window block with the available data and then computes the maximum eigenvalue of the covariance matrix. Subsequently, the maximum eigenvalue matrix is transformed into a one-dimensional eigenvalue image, enabling extended target detection through analogy with the energy accumulation detection method. Furthermore, this paper analyzes the proposed extended target detection method from both theoretical and experimental perspectives, validating it through field-measured data. The results obtained from the measured data demonstrate that the method effectively enhances the SNR in low SNR conditions, thereby improving target detection performance. Additionally, the method exhibits robustness across different scattering center targets.

The latest generation of high-spatial-resolution satellites produces measurements of high-temperature volcanic features at global scale, which are valuable to monitor volcanic activity. Recent advances in technology and increased computational resources have resulted in an extraordinary amount of monitoring data, which can no longer be so readily examined. Here, we present an automatic detection algorithm based on a deep convolutional neural network (CNN) that uses infrared satellite data to automatically determine the presence of volcanic thermal activity. We exploit the potentiality of the transfer learning technique to retrain a pre-trained SqueezeNet CNN to a new domain. We fine-tune the weights of the network over a new dataset opportunely created with images related to thermal anomalies of different active volcanoes around the world. Furthermore, an ensemble approach is employed to enhance accuracy and robustness when compared to using individual models. We chose a balanced training dataset with two classes, one containing volcanic thermal anomalies (erupting volcanoes) and the other containing no thermal anomalies (non-erupting volcanoes), to differentiate between volcanic scenes with eruptive and non-eruptive activity. We used satellite images acquired in the infrared bands by ESA Sentinel-2 Multispectral Instrument (MSI) and NASA & USGS Landsat 8 Operational Land Imager and Thermal InfraRed Sensor (OLI/TIRS). This deep learning approach makes the model capable of identifying the appearance of a volcanic thermal anomaly in the images belonging to the volcanic domain with an overall accuracy of 98.3%, recognizing the scene with active flows and erupting vents (i.e., eruptive activity) and the volcanoes at rest. This model is generalizable, and has the capability to analyze every image captured by these satellites over volcanoes around the world. [ABSTRACT FROM AUTHOR]

Cotton is one of the most important cash crops in Xinjiang, and timely seedling inspection and replenishment at the seedling stage are essential for cotton's late production management and yield formation. The background conditions of the cotton seedling stage are complex and variable, and deep learning methods are widely used to extract target objects from the complex background. Therefore, this study takes seedling cotton as the research object and uses three deep learning algorithms, YOLOv5, YOLOv7, and CenterNet, for cotton seedling detection and counting using images at six different times of the cotton seedling period based on multispectral images collected by UAVs to develop a model applicable to the whole cotton seedling period. The results showed that when tested with data collected at different times, YOLOv7 performed better overall in detection and counting, and the T4 dataset performed better in each test set. Precision, Recall, and F1-Score values with the best test results were 96.9%, 96.6%, and 96.7%, respectively, and the R2, RMSE, and RRMSE indexes were 0.94, 3.83, and 2.72%, respectively. In conclusion, the UAV multispectral images acquired about 23 days after cotton sowing (T4) with the YOLOv7 algorithm achieved rapid and accurate seedling detection and counting throughout the cotton seedling stage. [ABSTRACT FROM AUTHOR]

Because of the recent advances in drones or Unmanned Aerial Vehicle (UAV) platforms, sensors and software, UAVs have gained popularity among precision agriculture researchers and stakeholders for estimating traits such as crop yield and diseases. Early detection of crop disease is essential to prevent possible losses on crop yield and ultimately increasing the benefits. However, accurate estimation of crop disease requires modern data analysis techniques such as machine learning and deep learning. This work aims to review the actual progress in crop disease detection, with an emphasis on machine learning and deep learning techniques using UAV-based remote sensing. First, we present the importance of different sensors and image-processing techniques for improving crop disease estimation with UAV imagery. Second, we propose a taxonomy to accumulate and categorize the existing works on crop disease detection with UAV imagery. Third, we analyze and summarize the performance of various machine learning and deep learning methods for crop disease detection. Finally, we underscore the challenges, opportunities and research directions of UAV-based remote sensing for crop disease detection. [ABSTRACT FROM AUTHOR]

One of the ideas behind vegetation monitoring is the ability to identify different vegetation units, such as species, communities, habitats, or vegetation types. Remote sensing data allow for obtaining such information remotely, which is especially valuable in areas that are difficult to explore (such as mountains or wetlands). At the same time, such techniques allow for limiting field research, which is particularly important in this context. Remote sensing has been utilized for vegetation inventories for many decades, using airborne and spaceborne platforms. Developing newer tools, algorithms and sensors is conducive to more new applications in the vegetation identification field. The Special Issue "Remote Sensing Applications in Vegetation Classification" is an overview of the applications of remote sensing data with different resolutions for the identification of vegetation at different levels of detail. In 14 research papers, the most frequent different types of crops were analysed. In three cases, the authors recognised different types of grasslands, whereas trees were the object of the studies in two papers. The most commonly used sensors were Copernicus Sentinel-1 and Sentinel-2; however, to a lesser extent, MODIS, airborne hyperspectral and multispectral data, as well as LiDAR products, were also utilised. There were articles that tested and compared different combinations of datasets, different terms of data acquisition, or different classifiers in order to achieve the highest classification accuracy. These accuracies were assessed quite satisfactorily in each publication; the overall accuracy (OA) for the best result varied from 72% to 98%. In all of the research papers, at least one of the two commonly used machine learning algorithms, random forest (RF) and support vector machines (SVM), was applied. Additionally, one paper presented software ARTMO's machine-learning classification algorithms toolbox, which allows for the testing of 13 different classifiers. The studies published in this Special Issue can be used by the vegetation research teams and practitioners to conduct deeper analysis via the utilization of the proposed solutions. [ABSTRACT FROM AUTHOR]

Myrtle rust is a very damaging disease, caused by the fungus Austropuccinia psidii, which has recently arrived in New Zealand and threatens the iconic tree species pōhutukawa (Metrosideros excelsa). Canopy-level hyperspectral and thermal images were taken repeatedly within a controlled environment, from 49 inoculated (MR treatment) and 26 uninoculated (control treatment) pōhutukawa plants. Measurements were taken prior to inoculation and six times post-inoculation over a 14-day period. Using indices extracted from these data, the objectives were to (i) identify the key thermal and narrow-band hyperspectral indices (NBHIs) associated with the pre-visual and early expression of myrtle rust and (ii) develop a classification model to detect the disease. The number of symptomatic plants increased rapidly from three plants at 3 days after inoculation (DAI) to all 49 MR plants at 8 DAI. NBHIs were most effective for pre-visual and early disease detection from 3 to 6 DAI, while thermal indices were more effective for detection of disease following symptom expression from 7 to 14 DAI. Using results compiled from an independent test dataset, model performance using the best thermal indices and NBHIs was excellent from 3 DAI to 6 DAI (F1 score 0.81–0.85; accuracy 73–80%) and outstanding from 7 to 14 DAI (F1 score 0.92–0.93; accuracy 89–91%).

Early discovery and monitoring of the active deformation areas of potential landslides are important for geohazard risk prevention. The objective of the study is to propose a one-step strategy for automatically mapping the active deformation areas of potential landslides from a Sentinel-1 SAR dataset. First, we built a generalized convolutional neural network (CNN) based on activity and topographic characteristics. Second, we conducted a comparative analysis of the performance of various multi-channel combiners for detecting the active deformation areas of the potential landslides. Third, we verified the transferability of the pretrained CNN model for an unknown region. We found that by incorporating topographic characteristics into a generalized convolutional neural network, we were able to enhance the accuracy of identifying the active deformation areas of potential landslides, rapidly mapping these areas. The methodology is robust and efficient, and it has the capability to automatically detect the active deformation areas of potential landslides, even in unknown or unfamiliar regions. This product can facilitate automated pipelines, updating and mapping active deformation areas for final users who are not InSAR experts. This implementation can be used for providing support to risk management activities.

The current image generative models have achieved a remarkably realistic image quality, offering numerous academic and industrial applications. However, to ensure these models are used for benign purposes, it is essential to develop tools that definitively detect whether an image has been synthetically generated. Consequently, several detectors with excellent performance in computer vision applications have been developed. However, these detectors cannot be directly applied as they areto multi-spectral satellite images, necessitating the training of new models. While two-class classifiers generally achieve high detection accuracies, they struggle to generalize to image domains and generative architectures different from those encountered during training. In this paper, we propose a one-class classifier based on Vector Quantized Variational Autoencoder 2 (VQ-VAE 2) features to overcome the limitations of two-class classifiers. We start by highlighting the generalization problem faced by binary classifiers. This was demonstrated by training and testing an EfficientNet-B4 architecture on multiple multi-spectral datasets. We then illustrate that the VQ-VAE 2-based classifier, which was trained exclusively on pristine images, could detect images from different domains and generated by architectures not encountered during training. Finally, we conducted a head-to-head comparison between the two classifiers on the same generated datasets, emphasizing the superior generalization capabilities of the VQ-VAE 2-based detector, wherewe obtained a probability of detection at a 0.05 false alarm rate of 1 for the blue and red channels when using the VQ-VAE 2-based detector, and 0.72 when we used the EfficientNet-B4 classifier.

This paper presents a pioneering study in the application of real-time surface landmine detection using a combination of robotics and deep learning. We introduce a novel system integrated within a demining robot, capable of detecting landmines in real time with high recall. Utilizing YOLOv8 models, we leverage both optical imaging and artificial intelligence to identify two common types of surface landmines: PFM-1 (butterfly) and PMA-2 (starfish with tripwire). Our system runs at 2 FPS on a mobile device missing at most 1.6% of targets. It demonstrates significant advancements in operational speed and autonomy, surpassing conventional methods while being compatible with other approaches like UAV. In addition to the proposed system, we release two datasets with remarkable differences in landmine and background colors, built to train and test the model performances.

In this research, E2YOLOX-VFL is proposed as a novel approach to address the challenges of optical image multi-scale ship detection and recognition in complex maritime and land backgrounds. Firstly, the typical anchor-free network YOLOX is utilized as the baseline network for ship detection. Secondly, the Efficient Channel Attention module is incorporated into the YOLOX Backbone network to enhance the model’s capability to extract information from objects of different scales, such as large, medium, and small, thus improving ship detection performance in complex backgrounds. Thirdly, we propose the Efficient Force-IoU (EFIoU) Loss function as a replacement for the Intersection over Union (IoU) Loss, addressing the issue whereby IoU Loss only considers the intersection and union between the ground truth boxes and the predicted boxes, without taking into account the size and position of targets. This also considers the disadvantageous effects of low-quality samples, resulting in inaccuracies in measuring target similarity, and improves the regression performance of the algorithm. Fourthly, the confidence loss function is improved. Specifically, Varifocal Loss is employed instead of CE Loss, effectively handling the positive and negative sample imbalance, challenging samples, and class imbalance, enhancing the overall detection performance of the model. Then, we propose Balanced Gaussian NMS (BG-NMS) to solve the problem of missed detection caused by the occlusion of dense targets. Finally, the E2YOLOX-VFL algorithm is tested on the HRSC2016 dataset, achieving a 9.28% improvement in mAP compared to the baseline YOLOX algorithm. Moreover, the detection performance using BG-NMS is also analyzed, and the experimental results validate the effectiveness of the E2YOLOX-VFL algorithm.

Since the deployment of EO resources into orbit, archaeological surveys have made extensive use of space imaging. In particular, synthetic aperture radar (SAR) and interferometric synthetic aperture radar (InSAR) data have often proved useful in many geomorphic investigations. In this study, we tested the potential of SAR/InSAR datasets for archaeological applications, which were conducted for southern Mesopotamia. While identifying the embedded human settlements, we attempted to reconstruct the paleoclimatic conditions and the paleotopography imprinted onto contemporary geography as key features of the environmental context of ancient human activity. First, Sentinel-1 and PALSAR-2 SAR/InSAR time-series data were compiled and used to identify the paleoshoreline and other ancient hydrologic backgrounds in southern Mesopotamia. We defined regions of interest (ROI) based on this and further used a rotational decomposition of the time-series signature to detect shallow subsurface features in predefined ROI. SAR/InSAR data processing identified ancient channels and shorelines that match the historical/archaeological records of key Sumerian cities. Our findings in Eridu and Larsa-Uruk-Umma, as well as their hydrological contexts, are archaeologically significant and suggest the need for more ground surveys. In terms of global coverage and resolving power, this study shows that the potential of SAR/InSAR for probing the background environment of ancient civilizations is comparable to high-resolution commercial optical imaging. Longer wavelength and higher resolution SAR/InSAR time-series datasets are highly anticipated for such applications. [ABSTRACT FROM AUTHOR]

To obtain accurate soil parameters and improve the accuracy of the acoustic-soil discrete element simulation model, we studied the model's parameter calibration. The simulation test was carried out using the measured acoustic velocity and dominant frequency as the response value (index). Firstly, the Plackett—Burman test scheme was used to obtain the sensitivity ranking of soil parameters to the dominant frequency and velocity of the acoustic wave. The parameters that significantly affect the acoustic wave were obtained: Shear modulus, Poisson's ratio, and coefficient of restitution. Then the Box—Behnken test scheme was used to establish the regression relationship between the dominant frequency and the velocity of the sound wave and Shear modulus, Poisson's ratio, and Coefficient of restitution. The results shows that the indexes that researchers focus on are different in different scenarios, and the sensitivity of soil parameters to different indicators is different, which results in different soil parameter values after calibration. This study analyzed the main factors affecting the accuracy of the acoustic-discrete element model in constructing the model, provided a method for improving the construction accuracy of the acoustic wave—soil discrete element model and provided a reference for the construction of discrete elements models in other fields. [ABSTRACT FROM AUTHOR]

Owing to the significant application potential of unmanned aerial vehicles (UAVs) and infrared imaging technologies, researchers from different fields have conducted numerous experiments on aerial infrared image processing. To continuously detect small road objects 24 h/day, this study proposes an efficient Rep-style Gaussian–Wasserstein network (ERGW-net) for small road object detection in infrared aerial images. This method aims to resolve problems of small object size, low contrast, few object features, and occlusions. The ERGW-net adopts the advantages of ResNet, Inception net, and YOLOv8 networks to improve object detection efficiency and accuracy by improving the structure of the backbone, neck, and loss function. The ERGW-net was tested on a DroneVehicle dataset with a large sample size and the HIT-UAV dataset with a relatively small sample size. The results show that the detection accuracy of different road targets (e.g., pedestrians, cars, buses, and trucks) is greater than 80%, which is higher than the existing methods.

Solar power generation has great development potential as an abundant and clean energy source. However, many factors affect the efficiency of the photovoltaic (PV) module; among these factors, outdoor PV modules are inevitably affected by stains, thus reducing the power generation efficiency of the PV panel. This paper proposes a framework for PV module stain detection based on UAV hyperspectral images (HSIs). The framework consists of two stain detection methods: constrained energy minimization (CEM)-based and orthogonal subspace projection (OSP)-based stain detection methods. Firstly, the contaminated PV modules are analyzed and processed to enhance the data’s analytical capability. Secondly, based on the known spectral signature of the PV module, stain detection methods are proposed, including CEM-based stain detection and OSP-based stain detection for PV modules. The experimental results on real data illustrate that, in comparison with contrasting methods, the proposed method achieves stain detection results that closely align with known stain percentages. Additionally, it exhibits a fitting curve similar to the more maturely developed electroluminescence-based methods currently in use.

Increased global dependence on Global Navigation Satellite Systems (GNSSs) has resulted in a high demand for greater precision and reliable measurements from GNSS receivers. The multipath problem is the single largest source of errors in modernised GNSSs. Double differencing techniques, such as Code Minus Carrier (CMC) have been shown to accurately detect and measure multipath, allowing for corrections to be made via Ground Base Augmentation Systems (GBAS), for example. However, these techniques require at least two receivers and the protection provided is not extended to stand-alone receivers. This paper introduces a new single differencing technique for the accurate detection of multipath in standalone GNSS receivers receiving modernised Binary Offset Carrier (BOC)-modulated signals. Similarities to CMC are drawn before the novel measurement, Code minus Subcarrier, (CMS) is characterised statistically and a threshold for multipath detection is determined. The effectiveness and sensitivity of this novel measurement as a multipath detection technique are analysed through simulation and multipath error envelope analysis. It will be shown that multipath echos capable of inducing a psuedorange error larger than the threshold are detectable at any amplitude. The method is finally verified using simulated fixed offset multipath, confirming that when code and subcarrier early–late spacings are optimal, all ranges of multipath delays, even as small as 21 meters, are detectable. This novel method of multipath detection requires no additional complex correlators than already exist in the chosen tracking algorithm, thus, providing excellent detection with minimum complexity added to the receiver structure.

Corn is an important part of the Mexican diet. The crop requires constant monitoring to ensure production. For this, plant density is often used as an indicator of crop yield, since knowing the number of plants helps growers to manage and control their plots. In this context, it is necessary to detect and count corn plants. Therefore, a database of aerial RGB images of a corn crop in weedy conditions was created to implement and evaluate deep learning algorithms. Ten flight missions were conducted, six with a ground sampling distance (GSD) of 0.33 cm/pixel at vegetative stages from V3 to V7 and four with a GSD of 1.00 cm/pixel for vegetative stages V6, V7 and V8. The detectors compared were YOLOv4, YOLOv4-tiny, YOLOv4-tiny-3l, and YOLOv5 versions s, m and l. Each detector was evaluated at intersection over union (IoU) thresholds of 0.25, 0.50 and 0.75 at confidence intervals of 0.05. A strong F1-Score penalty was observed at the IoU threshold of 0.75 and there was a 4.92% increase in all models for an IoU threshold of 0.25 compared to 0.50. For confidence levels above 0.35, YOLOv4 shows greater robustness in detection compared to the other models. Considering the mode of 0.3 for the confidence level that maximizes the F1-Score metric and the IoU threshold of 0.25 in all models, YOLOv5-s obtained a mAP of 73.1% with a coefficient of determination ( R 2 ) of 0.78 and a relative mean square error (rRMSE) of 42% in the plant count, followed by YOLOv4 with a mAP of 72.0%, R 2 of 0.81 and rRMSE of 39.5%. [ABSTRACT FROM AUTHOR]

The latest generation of high-spatial-resolution satellites produces measurements of high-temperature volcanic features at global scale, which are valuable to monitor volcanic activity. Recent advances in technology and increased computational resources have resulted in an extraordinary amount of monitoring data, which can no longer be so readily examined. Here, we present an automatic detection algorithm based on a deep convolutional neural network (CNN) that uses infrared satellite data to automatically determine the presence of volcanic thermal activity. We exploit the potentiality of the transfer learning technique to retrain a pre-trained SqueezeNet CNN to a new domain. We fine-tune the weights of the network over a new dataset opportunely created with images related to thermal anomalies of different active volcanoes around the world. Furthermore, an ensemble approach is employed to enhance accuracy and robustness when compared to using individual models. We chose a balanced training dataset with two classes, one containing volcanic thermal anomalies (erupting volcanoes) and the other containing no thermal anomalies (non-erupting volcanoes), to differentiate between volcanic scenes with eruptive and non-eruptive activity. We used satellite images acquired in the infrared bands by ESA Sentinel-2 Multispectral Instrument (MSI) and NASA & USGS Landsat 8 Operational Land Imager and Thermal InfraRed Sensor (OLI/TIRS). This deep learning approach makes the model capable of identifying the appearance of a volcanic thermal anomaly in the images belonging to the volcanic domain with an overall accuracy of 98.3%, recognizing the scene with active flows and erupting vents (i.e., eruptive activity) and the volcanoes at rest. This model is generalizable, and has the capability to analyze every image captured by these satellites over volcanoes around the world.

This work presents the first RFI detection and mitigation algorithm for the interferometric radiometers that will be implemented in its correlator unit. The algorithm operates in the time and frequency domains, applying polarimetric and statistical tests in both domains, and exhibiting a tunable and arbitrary low probability of false alarm. It is scalable to a configurable number of receivers, and it is optimized in terms of quantization bits and the implementation of the cross-correlations in the time or frequency domains for hardware resource saving. New features of this algorithm are the computation of the Stokes parameters per frequency bin in the Short-Time Fourier Transform and a new parameter called Polarimetric Kurtosis. If RFI is detected in one domain or in both, it is removed using the calculated blanking masks. The optimum algorithm parameters are computed, such as length of the FFTs, the threshold selection for a given probability of false alarm, and the selection of the blanking masks. Last, an important result refers to the application of Parseval's theorem for the computation of the cross-correlations in the frequency domain, instead of in the time domain, which is more efficient and leads to smaller errors even when using moderate quantization levels. The algorithm has been developed in the framework of the ESA's technology preparation for a potential L-band radiometer mission beyond SMOS. However, it is also applicable to (polarimetric) real aperture radiometers, and its performance would improve if more than one bit is used in the signal quantization. [ABSTRACT FROM AUTHOR]

The uncertainty verification of satellite ocean color products and the bias analysis of multiple data are both indispensable in the evaluation of ocean color products. Incidentally, ocean color products often have missing information that causes the methods mentioned above to be difficult to evaluate these data effectively. We propose an analysis and evaluation method based on data-free area. The objective of this study is to evaluate the quality of ocean color products with respect to information integrity and continuity. First, we use an improved Spectral Angle Mapper, also called ISAM. It can automatically obtain the optimal threshold value for each class of objects. Then, based on ISAM, we perform spectral information mining on first-level Yellow Sea and Bohai Sea data obtained from the Geostationary Ocean Color Imager (GOCI), Moderate Resolution Imaging Spectroradiometer (MODIS) and Ocean and Land Color Instrument (OLCI). In this manner, quantitative results of information related to data-free areas of ocean data products are obtained. The findings indicate that the product data of OLCI are optimal with respect to both completeness and continuity. GOCI and MODIS have striking similarities in their quantitative or visualization results for both evaluation metrics. Moreover, a concomitant phenomenon of ocean-covered objects is apparent in the data-free area with temporal and spatial distribution characteristics. The two characteristics are subsequently explored for further analysis. The evaluation method adopted in this study can help to enrich the content of ocean color product evaluation, facilitate the research of cloud detection algorithms and further understand the composition of the data-free regional information of marine data products. The method proposed in this study has a wide application value. [ABSTRACT FROM AUTHOR]

3D reconstruction is a beneficial technique to generate 3D geometry of scenes or objects for various applications such as computer graphics, industrial construction, and civil engineering. There are several techniques to obtain the 3D geometry of an object. Close-range photogrammetry is an inexpensive, accessible approach to obtaining high-quality object reconstruction. However, state-of-the-art software systems need a stationary scene or a controlled environment (often a turntable setup with a black background), which can be a limiting factor for object scanning. This work presents a method that reduces the need for a controlled environment and allows the capture of multiple objects with independent motion. We achieve this by creating a preprocessing pipeline that uses deep learning to transform a complex scene from an uncontrolled environment into multiple stationary scenes with a black background that is then fed into existing software systems for reconstruction. Our pipeline achieves this by using deep learning models to detect and track objects through the scene. The detection and tracking pipeline uses semantic-based detection and tracking and supports using available pretrained or custom networks. We develop a correction mechanism to overcome some detection and tracking shortcomings, namely, object-reidentification and multiple detections of the same object. We show detection and tracking are effective techniques to address scenes with multiple motion systems and that objects can be reconstructed with limited or no knowledge of the camera or the environment. [ABSTRACT FROM AUTHOR]

Cotton is one of the most important cash crops in Xinjiang, and timely seedling inspection and replenishment at the seedling stage are essential for cotton’s late production management and yield formation. The background conditions of the cotton seedling stage are complex and variable, and deep learning methods are widely used to extract target objects from the complex background. Therefore, this study takes seedling cotton as the research object and uses three deep learning algorithms, YOLOv5, YOLOv7, and CenterNet, for cotton seedling detection and counting using images at six different times of the cotton seedling period based on multispectral images collected by UAVs to develop a model applicable to the whole cotton seedling period. The results showed that when tested with data collected at different times, YOLOv7 performed better overall in detection and counting, and the T4 dataset performed better in each test set. Precision, Recall, and F1-Score values with the best test results were 96.9%, 96.6%, and 96.7%, respectively, and the R2, RMSE, and RRMSE indexes were 0.94, 3.83, and 2.72%, respectively. In conclusion, the UAV multispectral images acquired about 23 days after cotton sowing (T4) with the YOLOv7 algorithm achieved rapid and accurate seedling detection and counting throughout the cotton seedling stage.

Because of the recent advances in drones or Unmanned Aerial Vehicle (UAV) platforms, sensors and software, UAVs have gained popularity among precision agriculture researchers and stakeholders for estimating traits such as crop yield and diseases. Early detection of crop disease is essential to prevent possible losses on crop yield and ultimately increasing the benefits. However, accurate estimation of crop disease requires modern data analysis techniques such as machine learning and deep learning. This work aims to review the actual progress in crop disease detection, with an emphasis on machine learning and deep learning techniques using UAV-based remote sensing. First, we present the importance of different sensors and image-processing techniques for improving crop disease estimation with UAV imagery. Second, we propose a taxonomy to accumulate and categorize the existing works on crop disease detection with UAV imagery. Third, we analyze and summarize the performance of various machine learning and deep learning methods for crop disease detection. Finally, we underscore the challenges, opportunities and research directions of UAV-based remote sensing for crop disease detection.

One of the ideas behind vegetation monitoring is the ability to identify different vegetation units, such as species, communities, habitats, or vegetation types. Remote sensing data allow for obtaining such information remotely, which is especially valuable in areas that are difficult to explore (such as mountains or wetlands). At the same time, such techniques allow for limiting field research, which is particularly important in this context. Remote sensing has been utilized for vegetation inventories for many decades, using airborne and spaceborne platforms. Developing newer tools, algorithms and sensors is conducive to more new applications in the vegetation identification field. The Special Issue “Remote Sensing Applications in Vegetation Classification” is an overview of the applications of remote sensing data with different resolutions for the identification of vegetation at different levels of detail. In 14 research papers, the most frequent different types of crops were analysed. In three cases, the authors recognised different types of grasslands, whereas trees were the object of the studies in two papers. The most commonly used sensors were Copernicus Sentinel-1 and Sentinel-2; however, to a lesser extent, MODIS, airborne hyperspectral and multispectral data, as well as LiDAR products, were also utilised. There were articles that tested and compared different combinations of datasets, different terms of data acquisition, or different classifiers in order to achieve the highest classification accuracy. These accuracies were assessed quite satisfactorily in each publication; the overall accuracy (OA) for the best result varied from 72% to 98%. In all of the research papers, at least one of the two commonly used machine learning algorithms, random forest (RF) and support vector machines (SVM), was applied. Additionally, one paper presented software ARTMO’s machine-learning classification algorithms toolbox, which allows for the testing of 13 different classifiers. The studies published in this Special Issue can be used by the vegetation research teams and practitioners to conduct deeper analysis via the utilization of the proposed solutions.

Alligator weed (Alternanthera philoxeroides (Mart.) Griseb) forms dense infestations in aquatic environments and is the focus of intensive management programs in many jurisdictions within Australia, including Victoria. A critical component of weed biosecurity programs is surveillance to find the location and extent of the target weed so that control strategies can be implemented. Current approaches within Victoria rely heavily on ground surveys and community reporting. However, these methods do not provide a systematic approach to surveillance across landscapes, resulting in undiscovered infestations. The aim of this study was to detect alligator weed from aerial photography and demonstrate the potential use of remote sensing data to support existing ground surveys and monitoring programs. Two random forest algorithms were trained based on data from 2010 and 2016. Both classifiers had high levels of accuracy, with an overall pixel-based classification accuracy of 96.8% in 2010 and 98.2% in 2016. The trained classifiers were then applied to imagery acquired annually between 2010 and 2016. The classification outputs were combined with class probability and water proximity data to produce a weighted, normalised alligator weed likelihood data layer. These datasets were evaluated by assessing alligator weed patch detection rates, using manually delineated areas of weed for each year. The patch detection rates for each year ranged from 76.5% to 100%. The results also demonstrate the use of this approach for monitoring alligator weed infestations at a site over time. The key outcome of the study is an approach to support existing biosecurity monitoring and surveillance efforts at a landscape scale and at known infested localised sites. [ABSTRACT FROM AUTHOR]

Since the deployment of EO resources into orbit, archaeological surveys have made extensive use of space imaging. In particular, synthetic aperture radar (SAR) and interferometric synthetic aperture radar (InSAR) data have often proved useful in many geomorphic investigations. In this study, we tested the potential of SAR/InSAR datasets for archaeological applications, which were conducted for southern Mesopotamia. While identifying the embedded human settlements, we attempted to reconstruct the paleoclimatic conditions and the paleotopography imprinted onto contemporary geography as key features of the environmental context of ancient human activity. First, Sentinel-1 and PALSAR-2 SAR/InSAR time-series data were compiled and used to identify the paleoshoreline and other ancient hydrologic backgrounds in southern Mesopotamia. We defined regions of interest (ROI) based on this and further used a rotational decomposition of the time-series signature to detect shallow subsurface features in predefined ROI. SAR/InSAR data processing identified ancient channels and shorelines that match the historical/archaeological records of key Sumerian cities. Our findings in Eridu and Larsa-Uruk-Umma, as well as their hydrological contexts, are archaeologically significant and suggest the need for more ground surveys. In terms of global coverage and resolving power, this study shows that the potential of SAR/InSAR for probing the background environment of ancient civilizations is comparable to high-resolution commercial optical imaging. Longer wavelength and higher resolution SAR/InSAR time-series datasets are highly anticipated for such applications.

To obtain accurate soil parameters and improve the accuracy of the acoustic-soil discrete element simulation model, we studied the model’s parameter calibration. The simulation test was carried out using the measured acoustic velocity and dominant frequency as the response value (index). Firstly, the Plackett—Burman test scheme was used to obtain the sensitivity ranking of soil parameters to the dominant frequency and velocity of the acoustic wave. The parameters that significantly affect the acoustic wave were obtained: Shear modulus, Poisson’s ratio, and coefficient of restitution. Then the Box—Behnken test scheme was used to establish the regression relationship between the dominant frequency and the velocity of the sound wave and Shear modulus, Poisson’s ratio, and Coefficient of restitution. The results shows that the indexes that researchers focus on are different in different scenarios, and the sensitivity of soil parameters to different indicators is different, which results in different soil parameter values after calibration. This study analyzed the main factors affecting the accuracy of the acoustic-discrete element model in constructing the model, provided a method for improving the construction accuracy of the acoustic wave—soil discrete element model and provided a reference for the construction of discrete elements models in other fields.

This work presents the first RFI detection and mitigation algorithm for the interferometric radiometers that will be implemented in its correlator unit. The algorithm operates in the time and frequency domains, applying polarimetric and statistical tests in both domains, and exhibiting a tunable and arbitrary low probability of false alarm. It is scalable to a configurable number of receivers, and it is optimized in terms of quantization bits and the implementation of the cross-correlations in the time or frequency domains for hardware resource saving. New features of this algorithm are the computation of the Stokes parameters per frequency bin in the Short-Time Fourier Transform and a new parameter called Polarimetric Kurtosis. If RFI is detected in one domain or in both, it is removed using the calculated blanking masks. The optimum algorithm parameters are computed, such as length of the FFTs, the threshold selection for a given probability of false alarm, and the selection of the blanking masks. Last, an important result refers to the application of Parseval’s theorem for the computation of the cross-correlations in the frequency domain, instead of in the time domain, which is more efficient and leads to smaller errors even when using moderate quantization levels. The algorithm has been developed in the framework of the ESA’s technology preparation for a potential L-band radiometer mission beyond SMOS. However, it is also applicable to (polarimetric) real aperture radiometers, and its performance would improve if more than one bit is used in the signal quantization.

Corn is an important part of the Mexican diet. The crop requires constant monitoring to ensure production. For this, plant density is often used as an indicator of crop yield, since knowing the number of plants helps growers to manage and control their plots. In this context, it is necessary to detect and count corn plants. Therefore, a database of aerial RGB images of a corn crop in weedy conditions was created to implement and evaluate deep learning algorithms. Ten flight missions were conducted, six with a ground sampling distance (GSD) of 0.33 cm/pixel at vegetative stages from V3 to V7 and four with a GSD of 1.00 cm/pixel for vegetative stages V6, V7 and V8. The detectors compared were YOLOv4, YOLOv4-tiny, YOLOv4-tiny-3l, and YOLOv5 versions s, m and l. Each detector was evaluated at intersection over union (IoU) thresholds of 0.25, 0.50 and 0.75 at confidence intervals of 0.05. A strong F1-Score penalty was observed at the IoU threshold of 0.75 and there was a 4.92% increase in all models for an IoU threshold of 0.25 compared to 0.50. For confidence levels above 0.35, YOLOv4 shows greater robustness in detection compared to the other models. Considering the mode of 0.3 for the confidence level that maximizes the F1-Score metric and the IoU threshold of 0.25 in all models, YOLOv5-s obtained a mAP of 73.1% with a coefficient of determination (R2) of 0.78 and a relative mean square error (rRMSE) of 42% in the plant count, followed by YOLOv4 with a mAP of 72.0%, R2 of 0.81 and rRMSE of 39.5%.

The uncertainty verification of satellite ocean color products and the bias analysis of multiple data are both indispensable in the evaluation of ocean color products. Incidentally, ocean color products often have missing information that causes the methods mentioned above to be difficult to evaluate these data effectively. We propose an analysis and evaluation method based on data-free area. The objective of this study is to evaluate the quality of ocean color products with respect to information integrity and continuity. First, we use an improved Spectral Angle Mapper, also called ISAM. It can automatically obtain the optimal threshold value for each class of objects. Then, based on ISAM, we perform spectral information mining on first-level Yellow Sea and Bohai Sea data obtained from the Geostationary Ocean Color Imager (GOCI), Moderate Resolution Imaging Spectroradiometer (MODIS) and Ocean and Land Color Instrument (OLCI). In this manner, quantitative results of information related to data-free areas of ocean data products are obtained. The findings indicate that the product data of OLCI are optimal with respect to both completeness and continuity. GOCI and MODIS have striking similarities in their quantitative or visualization results for both evaluation metrics. Moreover, a concomitant phenomenon of ocean-covered objects is apparent in the data-free area with temporal and spatial distribution characteristics. The two characteristics are subsequently explored for further analysis. The evaluation method adopted in this study can help to enrich the content of ocean color product evaluation, facilitate the research of cloud detection algorithms and further understand the composition of the data-free regional information of marine data products. The method proposed in this study has a wide application value.

3D reconstruction is a beneficial technique to generate 3D geometry of scenes or objects for various applications such as computer graphics, industrial construction, and civil engineering. There are several techniques to obtain the 3D geometry of an object. Close-range photogrammetry is an inexpensive, accessible approach to obtaining high-quality object reconstruction. However, state-of-the-art software systems need a stationary scene or a controlled environment (often a turntable setup with a black background), which can be a limiting factor for object scanning. This work presents a method that reduces the need for a controlled environment and allows the capture of multiple objects with independent motion. We achieve this by creating a preprocessing pipeline that uses deep learning to transform a complex scene from an uncontrolled environment into multiple stationary scenes with a black background that is then fed into existing software systems for reconstruction. Our pipeline achieves this by using deep learning models to detect and track objects through the scene. The detection and tracking pipeline uses semantic-based detection and tracking and supports using available pretrained or custom networks. We develop a correction mechanism to overcome some detection and tracking shortcomings, namely, object-reidentification and multiple detections of the same object. We show detection and tracking are effective techniques to address scenes with multiple motion systems and that objects can be reconstructed with limited or no knowledge of the camera or the environment.