Search

Accurate assessments of the historical and current status of eco-environmental quality (EEQ) are essential for governments to have a comprehensive understanding of regional ecological conditions, formulate scientific policies, and achieve the United Nations Sustainable Development Goals (SDGs). While various approaches to EEQ monitoring exist, they each have limitations and cannot be used universally. Moreover, previous studies lack detailed examinations of EEQ dynamics and its driving factors at national and local levels. Therefore, this study utilized a remote sensing ecological index (RSEI) to assess the EEQ of China from 2001 to 2021. Additionally, an emerging hot-spot analysis was conducted to study the spatial and temporal dynamics of the EEQ of China. The degree of influence of eight major drivers affecting EEQ was evaluated by a GeoDetector model. The results show that from 2001 to 2021, the mean RSEI values in China showed a fluctuating upward trend; the EEQ varied significantly in different regions of China, with a lower EEQ in the north and west and a higher EEQ in the northeast, east, and south in general. The spatio-temporal patterns of hot/cold spots in China were dominated by intensifying hot spots, persistent cold spots, and diminishing cold spots, with an area coverage of over 90%. The hot spots were concentrated to the east of the Hu Huanyong Line, while the cold spots were concentrated to its west. The oscillating hot/cold spots were located in the ecologically fragile agro-pastoral zone, next to the upper part of the Hu Huanyong Line. Natural forces have become the main driving force for changes in China’s EEQ, and precipitation and soil sand content were key variables affecting the EEQ. The interaction between these factors had a greater impact on the EEQ than individual factors.

Seagrass is an important structural and functional component of the global marine ecosystem and is of high value for its ecological services. This paper took Xincun Bay (including Xincun Harbor and Li’an Harbor) of Hainan Province as the study area, combined ground truth data, and adopted two methods to map seagrass in 2020 using Chinese GF2 satellite images: maximum-likelihood and object-oriented classification. Sentinel-2 images from 2016 to 2020 were used to extract information on seagrass distribution changes. The following conclusions were obtained. (1) Based on GF2 imagery, both the classical maximum likelihood classification (MLC) method and the object-based image analysis (OBIA) method can effectively extract seagrass information, and OBIA can also portray the overall condition of seagrass patches. (2) The total seagrass area in the study area in 2020 was about 395 hectares, most of which was distributed in Xincun Harbor. The southern coast of Xincun Harbor is an important area where seagrass is concentrated over about 228 hectares in a strip-like continuous distribution along the coastline. (3) The distribution of seagrasses in the study area showed a significant decaying trend from 2016 to 2020. The total area of seagrass decreased by 79.224 ha during the five years from 2016 to 2020, with a decay rate of 16.458%. This study is the first on the comprehensive monitoring of seagrass in Xincun Bay using satellite remote sensing images, and comprises the first use of GF2 data in seagrass research, aiming to provide a reference for remote sensing monitoring of seagrass in the South China Sea.

Currently available high-resolution digital elevation model (DEM) is not particularly useful to geologists for understanding the long-term changes in fluvial landforms induced by tectonic uplift, although DEMs that are generated from satellite stereo images such as the ZiYuan-3 (ZY3) satellite include characteristics with significant coverage and rapid acquisition. Since an ongoing analysis of fluvial systems is lacking, the ZY3 DEM was generated from block adjustment to describe the mountainous area of the Qianhe Basin that have been induced by tectonic uplift. Moreover, we evaluated the overall elevation difference in ZY3 DEM, Shuttle Radar Topography Mission (1″ × 1″) (SRTM1), and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM) by using the Ice Cloud and Land Elevation Satellite/Geoscience Laser Altimeter (ICESat/GLAH14) point cloud and a DEM of 1:50,000 scale. The values of the root mean square error (RMSE) of the elevation difference for ZY3 DEM were 9.31 and 9.71 m, respectively, and are in good agreement with SRTM1. The river long profiles and terrace heights were also extracted to compare the differences in channel steepness and the incision rates with SRTM1 and ASTER GDEM. Our results prove that ZY3 DEM would be a good alternative to SRTM1 in achieving the 1:50,000 scale for DEM products in China, while ASTER GDEM is unsuitable for extracting river longitudinal profiles. In addition, the northern and southern river incision rates were estimated using the ages and heights of river terraces, demonstrating a range from 0.12–0.45 to 0.10–0.33 m/kyr, respectively. Collectively, these findings suggest that ZY3 DEM is capable of estimating tectonic geomorphological features and has the potential for analyzing the continuous evolutionary response of a landscape to changes in climate and tectonics.

The forest growth and yield models, which are used as important decision-support tools in forest management, are commonly based on the individual tree characteristics, such as diameter at breast height (DBH), crown ratio, and height to crown base (HCB). Taking direct measurements for DBH and HCB through the ground-based methods is cumbersome and costly. The indirect method of getting such information is possible from remote sensing databases, which can be used to build DBH and HCB prediction models. The DBH and HCB of the same trees are significantly correlated, and so their inherent correlations need to be appropriately accounted for in the DBH and HCB models. However, all the existing DBH and HCB models, including models based on light detection and ranging (LiDAR) have ignored such correlations and thus failed to account for the compatibility of DBH and HCB estimates, in addition to disregarding measurement errors. To address these problems, we developed a compatible simultaneous equation system of DBH and HCB error-in-variable (EIV) models using LiDAR-derived data and ground-measurements for 510 Picea crassifolia Kom trees in northwest China. Four versatile algorithms, such as nonlinear seemingly unrelated regression (NSUR), two-stage least square (2SLS) regression, three-stage least square (3SLS) regression, and full information maximum likelihood (FIML) were evaluated for their estimating efficiencies and precisions for a simultaneous equation system of DBH and HCB EIV models. In addition, two other model structures, namely, nonlinear least squares with HCB estimation not based on the DBH (NLS and NBD) and nonlinear least squares with HCB estimation based on the DBH (NLS and BD) were also developed, and their fitting precisions with a simultaneous equation system compared. The leave-one-out cross-validation method was applied to evaluate all estimating algorithms and their resulting models. We found that only the simultaneous equation system could illustrate the effect of errors associated with the regressors on the response variables (DBH and HCB) and guaranteed the compatibility between the DBH and HCB models at an individual level. In addition, such an established system also effectively accounted for the inherent correlations between DBH with HCB. However, both the NLS and BD model and the NLS and NBD model did not show these properties. The precision of a simultaneous equation system developed using NSUR appeared the best among all the evaluated algorithms. Our equation system does not require the stand-level information as input, but it does require the information of tree height, crown width, and crown projection area, all of which can be readily derived from LiDAR imagery using the delineation algorithms and ground-based DBH measurements. Our results indicate that NSUR is a more reliable and quicker algorithm for developing DBH and HCB models using large scale LiDAR-based datasets. The novelty of this study is that the compatibility problem of the DBH model and the HCB EIV model was properly addressed, and the potential algorithms were compared to choose the most suitable one (NSUR). The presented method and algorithm will be useful for establishing similar compatible equation systems of tree DBH and HCB EIV models for other tree species.