Search

Earth system models (ESMs) are important tools for assessing the historical characteristics and predicting the future characteristics of precipitation, yet the quantitative understanding of how these land–atmospheric coupling models perform in simulating precipitation characteristics remains limited. This study conducts a comprehensive evaluation of precipitation changes simulated by 43 ESMs in CMIP5 and 32 ESMs in CMIP6 in Arid Central Asia (ALL) and its two sub-regions for 1959–2005 with reference to Climate Research Unit (CRU) data, and predicts precipitation changes for 2054–2100. Our analyses suggest the following: (a) no single model consistently outperformed the others in all aspects of simulated precipitation variability (annual averages, long-term trends, and climatological monthly patterns); (b) the CMIP5 and CMIP6 model simulations tended to overestimate average annual precipitation for most of the ALL region, especially in the Xinjiang Uygur Autonomous Region of China (XJ); (c) most model simulations projected a stronger increasing trend in average annual precipitation; (d) although all the model simulations reasonably captured the climatological monthly precipitation, there was an underestimation; (e) compared to CMIP5, most CMIP6 model simulations exhibited an enhanced capacity to simulate precipitation across all aspects, although discrepancies persisted in individual sub-regions; (f) it was confirmed that the multi-model ensemble mean (MME) provides a more accurate representation of the three aspects of precipitation compared to the majority of single-model simulations. Lastly, the values of precipitation predicted by the more efficient models across the ALL region and its sub-regions under the different scenarios showed an increasing trend in most seasons. Notably, the strongest increasing trend in precipitation was seen under the high-emission scenarios. [ABSTRACT FROM AUTHOR]

The large area estimation of forest canopy closure (FCC) using remotely sensed data is of high interest in monitoring forest changes and forest health, as well as in assessing forest ecological services. The accurate estimation of FCC over the regional or global scale is challenging due to the difficulty of sample acquisition and the slow processing efficiency of large amounts of remote sensing data. To address this issue, we developed a novel bounding envelope methodology based on vegetation indices (BEVIs) for determining vegetation and bare soil endmembers using the normalized differences vegetation index (NDVI), modified bare soil index (MBSI), and bare soil index (BSI) derived from Landsat 8 OLI and Sentinel-2 image within the Google Earth Engine (GEE) platform, then combined the NDVI with the dimidiate pixel model (DPM), one of the most commonly used spectral-based unmixing methods, to map the FCC distribution over an area of more than 90,000 km2. The key processing was the determination of the threshold parameter in BEVIs that characterizes the spectral boundary of vegetation and soil endmembers. The results demonstrated that when the threshold equals 0.1, the extraction accuracy of vegetation and bare soil endmembers is the highest with the threshold range given as (0, 0.3), and the estimated spatial distribution of FCC using both Landsat 8 and Sentinel-2 images were consistent, that is, the area with high canopy density was mainly distributed in the western mountainous region of Chifeng city. The verification was carried out using independent field plots. The proposed approach yielded reliable results when the Landsat 8 data were used (R2 = 0.6, RMSE = 0.13, and 1-rRMSE = 80%), and the accuracy was further improved using Sentinel-2 images with higher spatial resolution (R2 = 0.81, RMSE = 0.09, and 1-rRMSE = 86%). The findings demonstrate that the proposed method is portable among sensors with similar spectral wavebands, and can assist in mapping FCC at a regional scale while using multispectral satellite imagery. [ABSTRACT FROM AUTHOR]

The combination of natural environment changes and human activities affects the growth of grasslands. In order to quantitatively assess the causes of spatial and temporal variation of grasslands in Xilingol, this study assessed the spatial and temporal evolution patterns of grassland health based on MOD13A1 long time series Normalized Difference Vegetation Index (NDVI) data from 2000–2019 using trend analysis. The geodetector model was used to explore the dominant drivers of spatial variation in grassland NDVI, combined with 34 factors covering natural environmental changes and human disturbances over the same period. The results show that the grasslands of Xilingol showed an overall recovery trend from 2000 to 2019, with an average annual NDVI growth rate of 0.0028/a, a monthly increasing rate of 0.0005/month, and 68.06% of the grassland at an average recovery level. Moisture-dominated natural climate change factors, such as Growing Season Precipitation (Prep2), Annual Mean Water Vapor Pressure (WVP), and Annual Mean Relative Humidity (RH), were the underlying cause of grassland health changes during the study period, with the highest explanatory factor being growing season precipitation (q value of 0.59 on a multi-year average). The influence of primary production value among human activities was greater, and the explanatory factor of tertiary production value showed an increasing trend. The interactions among natural and anthropogenic factors significantly enhances their explanatory credibility for NDVI, with the type of interaction dominated by the two-factor enhancement. Risk detection of the top 10 dominant drivers in terms of q statistic were carried out to obtain the threshold range of each driver in the high zone of grassland NDVI, which can provide a scientific reference for the sustainable restoration of grassland. [ABSTRACT FROM AUTHOR]

Accurate information regarding forest volume plays an important role in estimating afforestation, timber harvesting, and forest ecological services. Traditionally, operations on forest growing stock volume using field measurements are labor-intensive and time-consuming. Recently, remote sensing technology has emerged as a time-cost efficient method for forest inventory. In the present study, we have adopted three procedures, including samples expanding, feature selection, and results generation and evaluation. Extrapolating the samples from Light Detection and Ranging (LiDAR) scanning is the most important step in satisfying the requirement of sample size for nonparametric methods operation and result in accuracy improvement. Besides, mean decrease Gini (MDG) methodology embedded into Random Forest (RF) algorithm served as a selector for feature measure; afterwards, RF and K-Nearest Neighbor (KNN) were adopted in subsequent forest volume prediction. The results show that the retrieval of Forest volume in the entire area was in the range of 50–360 m3/ha, and the results from the two models show a better consistency while using the sample combination extrapolated by the optimal threshold value (2 × 10−4), leading to the best performances of RF (R2 = 0.618, root mean square error, RMSE = 43.641 m3/ha, mean absolute error, MAE = 33.016 m3/ha), followed by KNN (R2 = 0.617, RMSE = 43.693 m3/ha, MAE = 32.534 m3/ha). The detailed analysis that is discussed in the present paper clearly shows that expanding image-derived LiDAR samples helps in refining the prediction of regional forest volume while using satellite data and nonparametric models. [ABSTRACT FROM AUTHOR]

Forest canopy height is an indispensable forest vertical structure parameter for understanding the carbon cycle and forest ecosystem services. A variety of studies based on spaceborne Lidar, such as ICESat, ICESat-2 and airborne Lidar, were conducted to estimate forest canopy height at multiple scales. However, while a few studies have been conducted based on ICESat-2 simulated data from airborne Lidar data, few studies have analyzed ATL08 and ATL03 products derived from the ATLAS sensor onboard ICESat-2 for regional vegetation canopy height mapping. It is necessary and promising to explore how data obtained by ICESat-2 can be applied to estimate forest canopy height. This study proposes a new means to estimate forest canopy height, defined as the mean height of trees within a given forest area, using a combination of ICESat-2 ATL08 and ATL03 data and ZY-3 satellite stereo images. Five procedures were used to estimate the forest canopy height of the city of Nanning in China: (1) Processing ground photons in a 30 m × 30 m grid; (2) Extracting a digital surface model (DSM) using ZY-3 stereo images; (3) Calculating a discontinuous canopy height model (CHM) dataset; (4) Validating the DSM and ground photon height using GEDI data; (5) Estimating the regional wall-to-wall forest canopy height product based on the backpropagation artificial neural network (BP-ANN) model and Landsat 8 vegetation indices and independent accuracy assessments with field measured plots. The validation shows a root mean square error (RMSE) of 3.34 m to 3.47 m and a coefficient of determination R2 = 0.51. The new method shows promise and can be used for large-scale forest canopy height mapping at various resolutions or in combination with other data, such as SAR images. Finally, this study analyzes resolutions and how to filter effective data when ATL08 data are directly used to generate regional or global vegetation height products, which will be the focus of future research. [ABSTRACT FROM AUTHOR]

Fires are frequent in boreal forests affecting forest areas. The detection of forest disturbances and the monitoring of forest restoration are critical for forest management. Vegetation phenology information in remote sensing images may interfere with the monitoring of vegetation restoration, but little research has been done on this issue. Remote sensing and the geographic information system (GIS) have emerged as important tools in providing valuable information about vegetation phenology. Based on the MODIS and Landsat time-series images acquired from 2000 to 2018, this study uses the spatio-temporal data fusion method to construct reflectance images of vegetation with a relatively consistent growth period to study the vegetation restoration after the Greater Hinggan Mountain forest fire in the year 1987. The influence of phenology on vegetation monitoring was analyzed through three aspects: band characteristics, normalized difference vegetation index (NDVI) and disturbance index (DI) values. The comparison of the band characteristics shows that in the blue band and the red band, the average reflectance values of the study area after eliminating phenological influence is lower than that without eliminating the phenological influence in each year. In the infrared band, the average reflectance value after eliminating the influence of phenology is greater than the value with phenological influence in almost every year. In the second shortwave infrared band, the average reflectance value without phenological influence is lower than that with phenological influence in almost every year. The analysis results of NDVI and DI values in the study area of each year show that the NDVI and DI curves vary considerably without eliminating the phenological influence, and there is no obvious trend. After eliminating the phenological influence, the changing trend of the NDVI and DI values in each year is more stable and shows that the forest in the region was impacted by other factors in some years and also the recovery trend. The results show that the spatio-temporal data fusion approach used in this study can eliminate vegetation phenology effectively and the elimination of the phenology impact provides more reliable information about changes in vegetation regions affected by the forest fires. The results will be useful as a reference for future monitoring and management of forest resources. [ABSTRACT FROM AUTHOR]