Search

The Global Navigation Satellite System Interferometric Reflectometry (GNSS-IR) technique provides a new remote sensing method that shows great potential for soil moisture detection and vegetation growth, as well as for climate research, water cycle management, and ecological environment monitoring. Considering that the land surface is always covered by vegetation, it is essential to take into account the impacts of vegetation growth when detecting soil moisture (SM). In this paper, based on the GNSS-IR technique, the SM was retrieved from multi-GNSS and multi-frequency data using a machine learning model, accounting for the impact of the vegetation moisture content (VMC). Both the signal-to-noise ratio (SNR) data that was used to retrieve SM and the multipath data that was used to eliminate the vegetation influence were collected from a standard geodetic GNSS station located in Nanjing, China. The normalized microwave reflectance index (NMRI) calculated by multipath data was mapped to a normalized difference vegetation index (NDVI), which was derived from Sentinel-2 data on the Google Earth Engine platform to estimate and eliminate the influence of VMC. Based on the characteristic parameters of amplitude and phase extracted from detrended SNR signals and NDVI derived from multipath data, three machine learning methods, including random forest (RF), multiple linear regression (MLR), and multivariate adaptive regression spline (MARS), were employed for data fusion. The results show that the vegetation effect can be well eliminated using the NMRI method. Comparing MLR and MARS, RF is more suitable for GNSS-IR SM inversion. Furthermore, the SM reversed from amplitude and phase fusion is better than only those from either amplitude fusion or phase fusion. The results prove the feasibility of the proposed method based on a multipath approach to characterize the vegetation effect, as well as the RF model to fuse multi-GNSS and multi-frequency data to retrieve SM with vegetation error-correcting.

Wind speed reconciliation across different wind sources is critically needed for extending available satellite wind records in Tropical Cyclones. The deviations between wind references of extremes, such as the moored buoy data and dropsonde wind estimates for guidance on geophysical model function development, are one of the main causes of wind speed differences for wind products, for instance, the overestimation of Synthetic Aperture Radars (SARs) relative to ASCAT winds. The study proposes a new wind speed adjustment to achieve mutual adjustment between ASCAT CMOD7 winds and simultaneous SAR wind speeds. The so-called CMOD7D-v2 adjustment is constructed based on the statistical analysis of SAR and ASCAT Tropical Cyclone acquisitions between 2016 and 2021, showing a satisfactory performance in wind speed reconciliation for winds with speeds higher than 14 m/s. Furthermore, the error characteristics of the CMOD7D-v2 adjustment for Tropical Cyclone winds are analyzed using the Triple Collocation analysis technique. The analysis results show that the proposed wind adjustment can reduce ASCAT wind errors by around 16.0% when adjusting ASCAT winds to SAR wind speeds. In particular, when downscaling SAR winds, the improvement in ASCAT wind errors can be up to 42.3%, effectively alleviating wind speed differences across wind sources. Furthermore, to avoid the impacts of large footprints by ASCAT sensors, wind speeds retrieved from SAR VV signals (acting as a substitute for ASCAT winds) are adjusted accordingly and compared against SAR dual-polarized winds and collocated Stepped Frequency Microwave Radiometer (SFMR) observations. We find that the bias values of adjusted winds are lower than products from other adjustment schemes by around 5 m/s at the most extreme values. These promising results verify the plausibility of the CMOD7D-v2 adjustment, which is conducive to SAR and ASCAT wind speed comparisons and extreme wind analysis in Tropical Cyclone cases.

Mass balance observations are beneficial for assessing climate change in different world regions. This study analyzed the glacier elevation change, ice flux divergence, and surface mass balance (SMB) in the West Kunlun Mountains (WKM) on the Tibetan Plateau using remote sensing data, including satellite altimetry, glacier surface velocity, and thickness fields. Seventeen local glaciers were examined in detail and showed varying surface elevation changes from −0.39 ± 0.11 to 0.83 ± 0.10 m/a. Overall, we obtained a reasonably rapid elevation trend of 0.21 ± 0.14 m/a. By combining the ice flux divergence and surface mass balance, the overall thickness change of the WKM glacier over time is almost zero, and the WKM glacier shows a positive mass balance of 0.21 ± 0.98 m/a. Moreover, the ice flux divergence is more significant on the ice tongue than in the flat region due to the more considerable gradient of surface velocity and thickness fields. We found that glacier heterogeneity dynamics were associated with a surging dynamic mechanism concentrated in the glacier tongue and were induced by inner terrain instabilities. The glacier surging causes a drastic drop in glacier elevation but does not cause a glacier mass gain or loss, and it has an enhanced effect on the ice flux divergence. Therefore, glacier surging is the main reason for the decline of the two glaciers monitored. In addition, the long-term meteorological data analysis found that, since 2000, the air temperature warming hiatus may have balanced the three glaciers, and significantly increasing precipitation variation may cause the glacier to thicken the most.

In this project report, the main outcomes relevant to the Sino-European Dragon-4 cooperation project ID 32235 “Microwave satellite measurements for coastal area and extreme weather monitoring” are reported. The project aimed at strengthening the Sino-European research cooperation in the exploitation of European Space Agency, Chinese and third-party mission Earth Observation (EO) microwave satellite data. The latter were exploited to perform an effective monitoring of coastal areas, even under extreme weather conditions. An integrated multifrequency/polarization approach based on complementary microwave sensors (e.g., Synthetic Aperture Radar, scatterometer, radiometer), together with ancillary information coming from independent sources, i.e., optical imagery, numerical simulations and ground measurements, was designed. In this framework, several tasks were addressed including marine target detection, sea pollution, sea surface wind estimation and coastline extraction/classification. The main outcomes are both theoretical (i.e., new models and algorithms were developed) and applicative (i.e., user-friendly maps were provided to the end-user community of coastal area management according to smart processing of remotely sensed data). The scientific relevance consists in the development of new algorithms, the effectiveness and robustness of which were verified on actual microwave measurements, and the improvement of existing methodologies to deal with challenging test cases.

Tropical cyclones (TCs) are essential for many reasons, including their destruction of human lives and property and their effect on heat and nutrient fluxes between the ocean’s surface and its depths. A better understanding of ocean fluxes is needed to predict the impact of global climate change on the oceans and to quantify how ocean heat content modulates the dynamics of global climate change. Similarly, improved modeling of nutrient fluxes is crucial for maintaining fisheries and preserving crucial marine ecosystems to benefit both humanity and marine life. Numerous remote sensors measure crucial geophysical quantities before, during, and after TCs, including sea surface temperature (SST), ocean color, chlorophyll concentration, ocean surface winds, sea surface height, and significant wave height. In this special issue, an international group of researchers have written articles describing (1) novel techniques and remote sensors for measuring the aforementioned quantities in tropical cyclones, (2) methods for validating and improving the accuracy of those measurements and harmonizing them among different sensors, (3) scientific analyses that investigate the relationships between remote-sensed ocean surface measurements and in situ measurements of vertical profiles of ocean temperature, salinity, and current, and (4) strategies for utilizing remote-sensed measurements to improve operational forecasts in order to provide better tropical cyclone warnings to human populations.

Ocean salinity has an important impact on marine environment simulations. The Soil Moisture and Ocean Salinity (SMOS) mission is the first satellite in the world to provide large-scale global salinity observations of the oceans. Salinity remote sensing observations in the open ocean have been successfully applied in data assimilations, while SMOS salinity observations contain large errors in the coastal ocean (including the South China Sea (SCS)) and high latitudes and cannot be effectively applied in ocean data assimilations. In this paper, the SMOS salinity observation data are corrected with the Generalized Regression Neural Network (GRNN) in data assimilation preprocessing, which shows that after correction, the bias and root mean square error (RMSE) of the SMOS sea surface salinity (SSS) compared with the Argo observations can be reduced from 0.155 PSU and 0.415 PSU to −0.003 PSU and 0.112 PSU, respectively, in the South China Sea. The effect is equally significant in the northwestern Pacific region. The preprocessed salinity data were applied to an assimilation in a coastal region for the first time. The six groups of assimilation experiments set in the South China Sea showed that the assimilation of corrected SMOS SSS can effectively improve the upper ocean salinity simulation.

A method of estimating tropical cyclone (TC) intensity based on Haiyang-2A (HY-2A) scatterometer, and Special Sensor Microwave Imager and Sounder (SSMIS) observations over the northwestern Pacific Ocean is presented in this paper. Totally, 119 TCs from the 2012 to 2017 typhoon seasons were selected, based on satellite-observed data and China Meteorological Administration (CMA) TC best track data. We investigated the relationship among the TC maximum-sustained wind (MSW), the microwave brightness temperature (TB), and the sea surface wind speed (SSW). Then, a TC intensity estimation model was developed, based on a multivariate linear regression using the training data of 96 TCs. Finally, the proposed method was validated using testing data from 23 other TCs, and its root mean square error (RMSE), mean absolute error (MAE), and bias were 5.94 m/s, 4.62 m/s, and −0.43 m/s, respectively.

Latent heat flux (LHF) plays an important role in the global hydrological cycle and is therefore necessary to understand global climate variability. It has been reported that the near-surface specific humidity is a major source of error for satellite-derived LHF. Here, a new empirical model relating multichannel brightness temperatures ( T B ) obtained from the Fengyun-3 (FY-3C) microwave radiometer and sea surface air specific humidity ( Q a ) is proposed. It is based on the relationship between T B , Q a , sea surface temperature (SST), and water vapor scale height. Compared with in situ data, the new satellite-derived Q a and LHF both exhibit better statistical results than previous estimates. For Q a , the bias, root mean square difference (RMSD), and the correlation coefficient (R2) between satellite and buoy in the mid-latitude region are 0.08 g/kg, 1.76 g/kg, and 0.92, respectively. For LHF, the bias, RMSD, and R2 are 2.40 W/m2, 34.24 W/m2, and 0.87, respectively. The satellite-derived Q a are also compared with National Oceanic and Atmospheric Administration (NOAA) Cooperative Institute for Research in Environmental Sciences (CIRES) humidity datasets, with a bias, RMSD, and R2 of 0.02 g/kg, 1.02 g/kg, and 0.98, respectively. The proposed method can also be extended in the future to observations from other space-borne microwave radiometers.

We propose new indicators for bivalve (oyster and mussel) beds on exposed intertidal flats, derived from dual-copolarization (HH + VV) TerraSAR-X, Radarsat-2, and ALOS-2 images of the German North Sea coast. Our analyses are based upon the Kennaugh element framework, and we show that different targets on exposed intertidal flats exhibit different radar backscattering characteristics, which manifest in different magnitudes of the Kennaugh elements. Namely, the inter-channel correlation’s real (K3) and imaginary (K7) part can be used to distinguish bivalve beds from surrounding sandy sediments, and together with the polarimetric coefficient (i.e., the normalized differential polarization ratio, K0/K4) they can be used as indicators for bivalve beds using multi-frequency dual-copolarization SAR data. Our results show that continuous bivalve bed monitoring is possible using dual-copolarimetric SAR acquisitions at all radar wavelengths.

Observations of sea surface wind field are critical for typhoon prediction. The scatterometer observation is one of the most important sources of sea surface winds, which provides both wind speed and wind direction information. However, the spatial resolution of scatterometer wind is low. Synthetic Aperture Radar (SAR) can provide a more detailed wind structure of the tropical cyclone. In addition, the cross-polarization observation of SAR can provide more detailed information of high speed wind (>25 m·s − 1 ) than the scatterometer. Nevertheless, due to the narrow swath of SAR, the number of retrieved sea surface wind data used in the data assimilation is limited, and another limitation of SAR wind observation is that it does not provide true wind direction information. In this paper, the joint assimilation of the Advanced Scatterometer (ASCAT) wind and Sentinel-1 SAR wind was investigated. Another limitation in the current operational typhoon prediction is the inefficient quality control (QC) method used in the data assimilation since a large number of high speed wind observations was rejected by the traditional Gaussian distribution QC. We introduce the Huber norm distribution quality control (QC) into the data assimilation successfully. A numerical simulation experiment of typhoon by Lionrock (2016) is conducted to test the proposed method. The experimental results showed that the new quality control scheme not only greatly increases the availability of wind data in the area of the typhoon center, but also improves the typhoon track prediction, as well as the intensity prediction. The joint assimilation of scatterometer and SAR winds does have a positive impact on the typhoon prediction.

High-resolution synthetic aperture radar (SAR) wind observations provide fine structural information for tropical cycles and could be assimilated into numerical weather prediction (NWP) models. However, in the conventional method assimilating the u and v components for SAR wind observations (SAR_uv), the wind direction is not a state vector and its observational error is not considered during the assimilation calculation. In this paper, an improved method for wind observation directly assimilates the SAR wind observations in the form of speed and direction (SAR_sd). This method was implemented to assimilate the sea surface wind retrieved from Sentinel-1 synthetic aperture radar (SAR) in the basic three-dimensional variational system for the Weather Research and Forecasting Model (WRF 3DVAR). Furthermore, a new quality control scheme for wind observations is also presented. Typhoon Lionrock in August 2016 is chosen as a case study to investigate and compare both assimilation methods. The experimental results show that the SAR wind observations can increase the number of the effective observations in the area of a typhoon and have a positive impact on the assimilation analysis. The numerical forecast results for this case show better results for the SAR_sd method than for the SAR_uv method. The SAR_sd method looks very promising for winds assimilation under typhoon conditions, but more cases need to be considered to draw final conclusions.

L-band active microwave remote sensing is one of the most important technical methods of ocean environmental monitoring and dynamic parameter retrieval. Recently, a unique negative upwind-crosswind (NUC) asymmetry of L-band ocean backscatter over a low wind speed range was observed. To study the directional features of L-band ocean surface backscattering, a new directional spectrum model is proposed and built into the advanced integral equation method (AIEM). This spectrum combines Apel’s omnidirectional spectrum and an improved empirical angular spreading function (ASF). The coefficients in the ASF were determined by the fitting of radar observations so that it provides a better description of wave directionality, especially over wavenumber ranges from short-gravity waves to capillary waves. Based on the improved spectrum and the AIEM scattering model, L-band NUC asymmetry at low wind speeds and positive upwind-crosswind (PUC) asymmetry at higher wind speeds are simulated successfully. The model outputs are validated against Aquarius/SAC-D observations under different incidence angles, azimuth angles and wind speed conditions.

L-band active microwave remote sensing is one of the most important technical methods of ocean environmental monitoring and dynamic parameter retrieval. Recently, a unique negative upwind-crosswind (NUC) asymmetry of L-band ocean backscatter over a low wind speed range was observed. To study the directional features of L-band ocean surface backscattering, a new directional spectrum model is proposed and built into the advanced integral equation method (AIEM). This spectrum combines Apel's omnidirectional spectrum and an improved empirical angular spreading function (ASF). The coefficients in the ASF were determined by the fitting of radar observations so that it provides a better description of wave directionality, especially over wavenumber ranges from short-gravity waves to capillary waves. Based on the improved spectrum and the AIEM scattering model, L-band NUC asymmetry at low wind speeds and positive upwind-crosswind (PUC) asymmetry at higher wind speeds are simulated successfully. The model outputs are validated against Aquarius/SAC-D observations under different incidence angles, azimuth angles and wind speed conditions. [ABSTRACT FROM AUTHOR]