Search

Knowledge about the spatial-temporal pattern of cropland abandonment is the premise for the management of abandoned croplands. Traditional mapping approaches of abandoned croplands usually utilize a multi-date classification-based land cover change trajectory. It requires quality training samples for land cover classification at each epoch, which is challenging in regions of smallholder agriculture in the absence of high-resolution imagery. Facing these challenges, a theoretical model is proposed to recognize abandoned croplands based on post-abandonment secondary succession. It applies the continuous change detection and classification (CCDC) temporal segmentation algorithm to Landsat time series (1986~2021) to obtain disjoint segments, representing croplands' status. The post-abandonment secondary succession showing a greening trend is recognized using NDVI-based harmonic analysis, so as to capture its preceding abandonment. This algorithm is applied to a mountainous area in southwest China, where cropland abandonments are widespread. Validation based on stratified random samples referenced by a vegetation index time series and satellite images shows that the detected abandoned croplands have user accuracy, producer accuracy and an F1 score ranging from 43% to 71%, with variation among abandonment year. The study area has a potential cropland extent of 22,294 km2, within which 9252 km2 of the cropland was abandoned. The three peak years of abandonment were 1994, 2000, and 2011. The algorithm is suitable to be applied to large-scale mapping due to its automatic manner. [ABSTRACT FROM AUTHOR]

Frequent spontaneous combustion activities restrict ecological restoration of coal waste dumps after reclamation. Effective monitoring of vegetation restoration is important for ensuring land reclamation success and preserving the ecological environment in mining areas. Development of unmanned aerial vehicle (UAV) technology has enabled fine-scale vegetation monitoring. In this study, we focused on Medicago sativa L. (alfalfa), a representative herbaceous vegetation type, in a coal waste dump after reclamation in Shanxi province, China. The alfalfa aboveground biomass (AGB) was used as an indicator for assessing vegetation restoration. The objective of this study was to evaluate the capacity of UAV-based fusion of RGB, multispectral, and thermal infrared information for estimating alfalfa AGB using various regression models, including random forest regression (RFR), gradient boosting decision tree (GBDT), K-nearest neighbor (KNN), support vector regression (SVR), and stacking models. The main results are as follows: (i) UAV multi-source data fusion improved alfalfa AGB estimation accuracy, although the enhancement diminished with the increasing number of sensor types. (ii) The stacking model consistently outperformed RFR, GBDT, KNN, and SVR regression models across all feature fusion combinations. It achieved high accuracy with R2 of 0.86–0.88, RMSE of 80.06–86.87 g/m2, and MAE of 60.24–62.69 g/m2. Notably, the stacking model based on only RGB imagery features mitigated the accuracy loss from limited types of features, potentially reducing equipment costs. This study demonstrated the potential of UAV in improving vegetation restoration management of coal waste dumps after reclamation. [ABSTRACT FROM AUTHOR]

The spontaneous combustion of coal gangue dumps after reclamation causes severe harm to the ecological environment surrounding mining areas. Using remote sensing technology to determine vegetation heat stress levels is an important way to evaluate the probability of a spontaneous combustion disaster. The canopy spectra and chlorophyll fluorescence (ChlF) parameters of alfalfa were collected through pot experiments to simulate different heat stress levels. Time series analyses of three ChlF (chlorophyll fluorescence) parameters showed that the regularity of the quantum efficiency of photosystem II (PSII) in light-adapted conditions ( Fv ′ / Fm ′ ) was stronger during the monitoring period. The correlation coefficients between the three ChlF parameters and the canopy raw spectrum, first derivative spectrum, and vegetation indices were calculated, and the spectral features were found to be more correlated. Lasso regression was used to further screen spectral features, and the optimal spectral features were the raw spectral value at 741 nm (abbreviated as RS (741)) and NDVI (652, 671). To discriminate among heat stress levels accurately and automatically, we built a time convolution neural network. The classification results showed that when the sequence length is 3, the heat stress is divided into three categories, and the model obtains the highest accuracy. In combination with relevant research conclusions on the temperature distribution law of spontaneous combustion in coal gangue dumps, three heat stress levels can be used to assess the potential of spontaneous combustion in coal gangue dumps after reclamation. The research results provide an important theoretical basis and technical support for early warnings regarding spontaneous combustion disasters in reclaimed coal gangue dumps. [ABSTRACT FROM AUTHOR]

Biomass is important in monitoring global carbon storage and the carbon cycle, which quickly and accurately estimates forest biomass. Precision forestry and forest modeling place high requirements on obtaining the individual parameters of various tree species in complex stands, and studies have included both the overall stand and individual trees. Most of the existing literature focuses on calculating the individual tree species' biomass in a single stand, and there is little research on calculating the individual tree biomass in complex stands. This paper calculates the individual tree biomass of various tree species in complex stands by combining multispectral and light detection and ranging (LIDAR) data. The main research steps are as follows. First, tree species are classified through multispectral data combined with field investigations. Second, multispectral classification data are combined with LIDAR point cloud data to classify point cloud tree species. Finally, the divided point cloud tree species are used to compare the diameter at breast height (DBH) and height of each tree species to calculate the individual tree biomass and classify the overall stand and individual measurements. The results show that under suitable conditions, it is feasible to identify tree species through multispectral classification and calculate the individual tree biomass of each species in conjunction with point-cloud data. The overall accuracy of identifying tree species in multispectral classification is 52%. Comparing the DBH of the classified tree species after terrestrial laser scanning (TLS) and unmanned aerial vehicle laser scanning (UAV-LS) to give UAV-LS+TLS, the concordance correlation coefficient (CCC) is 0.87 and the root-mean-square error (RMSE) is 10.45. The CCC and RMSE are 0.92 and 1.41 compared with the tree height after UAV-LS and UAV-LS+TLS. [ABSTRACT FROM AUTHOR]

In tropical/subtropical monsoon regions, accurate rice mapping is hampered by the following factors: (1) The frequent occurrence of clouds in such areas during the rice-growing season interferes strongly with optical remote sensing observations; (2) The agro-landscape in such regions is fragmented and scattered. Rice maps produced using low spatial resolution data cannot well delineate the detailed distribution of rice, while pixel-based mapping using medium and high resolutions has significant salt-and-pepper noise. (3) The cropping system is complex, and rice has a rotation schedule with other crops. Therefore, the Phenology-, Object- and Double Source-based (PODS) paddy rice mapping algorithm is implemented, which consists of three steps: (1) object extraction from multi-temporal 10-m Sentinel-2 images where the extracted objects (fields) are the basic classification units; (2) specifying the phenological stage of transplanting from Savitzky–Golay filtered enhanced vegetation index (EVI) time series using the PhenoRice algorithm; and (3) the identification of rice objects based on flood signal detection from time-series microwave and optical signals of the Sentinel-1/2. This study evaluated the potential of the combined use of the Sentinel-1/2 mission on paddy rice mapping in monsoon regions with the Hangzhou-Jiaxin-Huzhou (HJH) plain in China as the case study. A cloud computing approach was used to process the available Sentinel-1/2 imagery from 2019 and MODIS images from 2018 to 2020 in the HJH plain on the Google Earth Engine (GEE) platform. An accuracy assessment showed that the resultant object-based paddy rice map has a high accuracy with a producer (user) accuracy of 0.937 (0.926). The resultant 10-m paddy rice map is expected to provide unprecedented detail, spatial distribution, and landscape patterns for paddy rice fields in monsoon regions. [ABSTRACT FROM AUTHOR]

The development and utilization of mining resources are basic requirements for social and economic development. Both open-pit mining and underground mining have impacts on land, ecology, and the environment. Of these, open-pit mining is considered to have the greatest impact due to the drastic changes wrought on the original landform and the disturbance to vegetation. As awareness of environmental protection has grown, land reclamation has been included in the mining process. In this study, we used the Shengli Coalfield in the eastern steppe region of Inner Mongolia to demonstrate a mining and reclamation monitoring process. We combined the Google Earth Engine platform with time series Landsat images and the LandTrendr algorithm to identify and monitor mining disturbances to grassland and land reclamation in open-pit mining areas of the coalfield between 2003 and 2019. Pixel-based trajectories were used to reconstruct the temporal evolution of vegetation, and sequential Landsat archive data were used to achieve accurate measures of disturbances to vegetation. The results show that: (1) the proposed method can be used to determine the years in which vegetation disturbance and recovery occurred with accuracies of 86.53% and 78.57%, respectively; (2) mining in the Shengli mining area resulted in the conversion of 89.98 km2 of land from grassland, water, etc., to barren earth, and only 23.54 km2 was reclaimed, for a reclamation rate of 26.16%; and (3) the method proposed in this paper can achieve fast, efficient identification of surface mining land disturbances and reclamation, and has the potential to be applied to other similar areas. [ABSTRACT FROM AUTHOR]

Currently, it is a great challenge for remote sensing technology to accurately map mangrove forests owing to periodic inundation. A submerged mangrove recognition index (SMRI) using two high- and low-tide images was recently proposed to remove the influence of tides and identify mangrove forests. However, when the tidal height of the selected low-tide image is not at the lowest tidal level, the corresponding SMRI does not function well, which results in mangrove forests below the low tidal height being undetected. Furthermore, Spartina alterniflora Loisel (S. alterniflora) was introduced to China in 1979 and rapidly spread to become the most serious invasive plant along the Chinese coastline. The current SMRI has failed to distinguish S. alterniflora from submerged mangrove forests because of their similar spectral signatures. In this study, an SMRI-based mangrove forest mapping method was developed using the time series of Sentinel-2 images to mitigate the two aforementioned issues. In the proposed method, quantile synthesis was applied to the time series of Sentinel-2 images to generate a lowest-tide synthetic image for creating SMRI to identify submerged mangrove forests. Unsubmerged mangrove forests were classified using a support vector machine, and a preliminary mangrove forest map was created by merging them. In addition, S. alterniflora was distinguished from the mangrove forests by analyzing their phenological differences. Finally, mangrove forest mapping was performed by masking S. alterniflora. The proposed method was applied to the entire coastline of the Guangxi Province, China. The results showed that it can reliably and accurately identify submerged mangrove forests derived from SMRI by synthesizing low- and high-tide images using quantile synthesis, and the differentiation of S. alterniflora using phenological differences results in more accurate mangrove mapping. This work helps to improve the accuracy of mangrove forest mapping using SMRI and its feasibility for coastal wetland monitoring. It also provides data for sustainable management, ecological protection, and restoration of vegetation in coastal zones. [ABSTRACT FROM AUTHOR]

Land use change has an important influence on the spatial and temporal distribution of PM2.5 concentration. Therefore, based on the particulate matter (PM2.5) data from remote sensing instruments and land use change data in long time series, the Getis-Ord Gi* statistic and SP-SDM are employed to analyze the spatial distribution pattern of PM2.5 and its response to land use change in China. It is found that the average PM2.5 increased from 25.49 μg/m3 to 31.23 μg/m3 during 2000-2016, showing an annual average growth rate of 0.97%. It is still greater than 35 μg/m3 in nearly half of all cities. The spatial distribution pattern of PM2.5 presents the characteristics of concentrated regional convergence. PM2.5 is positively correlated with urban land and farmland, negatively correlated with forest land, grassland, and unused land. Furthermore, the average PM2.5 concentrations show the highest values for urban land and decrease in the order of farmland > unused land > water body > forest > grassland. The impact of land use change on PM2.5 is a non-linear process, and there are obvious differences and spillover effects for different land types. Thus, reasonably controlling the scale of urban land and farmland, optimizing the spatial distribution pattern and development intensity, and expanding forest land and grassland are conducive to curbing PM2.5 pollution. The research conclusions provide a theoretical basis for the management of PM2.5 pollution from the perspective of optimizing land use. [ABSTRACT FROM AUTHOR]

Coal production in opencast mining generates substantial waste materials, which are typically delivered to an on-site waste dump. As a large artificial loose pile, such dumps have a special multi-berm structure accompanied by some security issues due to wind and water erosion. Highly accurate digital surface models (DSMs) provide the basic information for detection and analysis of elevation change. Low-cost unmanned aerial vehicle systems (UAS) equipped with a digital camera have become a useful tool for DSM reconstruction. To achieve high-quality UAS products, consideration of the number and configuration of ground control points (GCPs) is required. Although increasing of GCPs will improve the accuracy of UAS products, the workload of placing GCPs is difficult and laborious, especially in a multi-berm structure such as a waste dump. Thus, the aim of this study is to propose an improved GCPs configuration to generate accurate DSMs of a waste dump to obtain accurate elevation information, with less time and fewer resources. The results of this study suggest that: (1) the vertical accuracy of DSMs is affected by the number of GCPs and their configuration. (2) Under a set number of GCPs, a difference of accuracy is obtained when the GCPs are located on different berms. (3) For the same number of GCPs, the type 4 (GCPs located on the 1st and 4th berms) in the study is the best configuration for higher vertical accuracy compared with other types. The principal objective of this study provides an effective GCP configuration for DSM construction of coal waste dumps with four berms, and also a reference for engineering piles using multiple berms. [ABSTRACT FROM AUTHOR]

Socioeconomic development is often dependent on the production of mining resources, but both opencast and underground mining harm vegetation and the eco-environment. Under the requirements of the construction for ecological civilization in China, more attention has been paid to the reclamation of mines and mining management. Thus, it is the basement of formulating policies related to mining management and implementing reclamation that detection of mining disturbance rapidly and accurately. This research carries on an empirical study in the Dexing copper mine, Jiangxi, China, aiming at exploring the process of distance and reclamation. Based on the dense time-series stack derived from the Landsat archive on Google Earth Engine (GEE), the disturbance of surface mining in the 1986–2020 period has been detected using the continuous change detection and classification (CCDC) algorithm. The results are that: (1) the overall accuracy of damage and recovery is 92% and 88%, respectively, and the Kappa coefficient is 85% and 84% respectively. This means that we obtained an ideal detection effect; (2) the surface-mining area was increasing from 1986–2020 in the Dexing copper mine, and the accumulation of mining damage is approximately 2865.96 ha with an annual area of 81.88 ha. We also found that the area was fluctuating with the increase. The detected natural restoration was appraised at a total of 544.95 ha in the 1988–2020 period with an average restoration of 16.03 ha. This means that it just restores less in general; (3) it has always been the case that the Dexing mine is damaged by mining and reclamation in the whole year (it is most frequently damaged month is July). All imageries in the mine are detected by the CCDC algorithm, and they are classified as four types by disturbing number in pixel scale (i.e., 0, 1, 2, more than 2 times). Based on that, we found that the only once disturbed pixels account for 64.75% of the whole disturbed pixels, which is the majority in the four classes; (4) this method provides an innovative perspective for obtaining the mining disturbed dynamic information timely and accurately and ensures that the time and number of surface mining disturbed areas are identified accurately. This method is also valuable in other applications including the detection of other similar regions. [ABSTRACT FROM AUTHOR]

Vegetation heat-stress assessment in the reclamation areas of coal gangue dumps is of great significance in controlling spontaneous combustion; through a temperature gradient experiment, we collected leaf spectra and water content data on alfalfa. We then obtained the optimal spectral features of appropriate leaf water content indicators through time series analysis, correlation analysis, and Lasso regression analysis. A spectral feature-based long short-term memory (SF-LSTM) model is proposed to estimate alfalfa's heat stress level; the live fuel moisture content (LFMC) varies significantly with time and has high regularity. Correlation analysis of the raw spectrum, first-derivative spectrum, spectral reflectance indices, and leaf water content data shows that LFMC and spectral data were the most strongly correlated. Combined with Lasso regression analysis, the optimal spectral features were the first-derivative spectral value at 1661 nm (abbreviated as FDS (1661)), RVI (1525,1771), DVI (1412,740), and NDVI (1447,1803). When the classification strategies were divided into three categories and the time sequence length of the spectral features was set to five consecutive monitoring dates, the SF-LSTM model had the highest accuracy in estimating the heat stress level in alfalfa; the results provide an important theoretical basis and technical support for vegetation heat-stress assessment in coal gangue dump reclamation areas. [ABSTRACT FROM AUTHOR]

The lockdown of cities in the Yangtze River Delta (YRD) during COVID-19 has provided many natural and typical test sites for estimating the potential of air pollution control and reduction. To evaluate the reduction of PM2.5 concentration in the YRD region by the epidemic lockdown policy, this study employs big data, including PM2.5 observations and 29 independent variables regarding Aerosol Optical Depth (AOD), climate, terrain, population, road density, and Gaode map Point of interesting (POI) data, to build regression models and retrieve spatially continuous distributions of PM2.5 during COVID-19. Simulation accuracy of multiple machine learning regression models, i.e., random forest (RF), support vector regression (SVR), and artificial neural network (ANN) were compared. The results showed that the RF model outperformed the SVR and ANN models in the inversion of PM2.5 in the YRD region, with the model-fitting and cross-validation coefficients of determination R2 reached 0.917 and 0.691, mean absolute error (MAE) values were 1.026 μg m−3 and 2.353 μg m−3, and root mean square error (RMSE) values were 1.413 μg m−3, and 3.144 μg m−3, respectively. PM2.5 concentrations during COVID-19 in 2020 have decreased by 3.61 μg m−3 compared to that during the same period of 2019 in the YRD region. The results of this study provide a cost-effective method of air pollution exposure assessment and help provide insight into the atmospheric changes under strong government controlling strategies. [ABSTRACT FROM AUTHOR]