Search

The Greater Amanzule Peatlands (GAP) in Ghana is an important biodiversity hotspot facing increasing pressure from anthropogenic land-use activities driven by rapid agricultural plantation expansion, urbanisation, and the burgeoning oil and gas industry. Accurate measurement of how these pressures alter land cover over time, along with the projection of future changes, is crucial for sustainable management. This study aims to analyse these changes from 2010 to 2020 and predict future scenarios up to 2040 using multi-source remote sensing and machine learning techniques. Optical, radar, and topographical remote sensing data from Landsat-7, Landsat-8, ALOS/PALSAR, and Shuttle Radar Topography Mission derived digital elevation models (DEMs) were integrated to perform land cover change analysis using Random Forest (RF), while Cellular Automata Artificial Neural Networks (CA-ANNs) were employed for predictive modelling. The classification model achieved overall accuracies of 93% in 2010 and 94% in both 2015 and 2020, with weighted F1 scores of 80.0%, 75.8%, and 75.7%, respectively. Validation of the predictive model yielded a Kappa value of 0.70, with an overall accuracy rate of 80%, ensuring reliable spatial predictions of future land cover dynamics. Findings reveal a 12% expansion in peatland cover, equivalent to approximately 6570 ± 308.59 hectares, despite declines in specific peatland types. Concurrently, anthropogenic land uses have increased, evidenced by an 85% rise in rubber plantations (from 30,530 ± 110.96 hectares to 56,617 ± 220.90 hectares) and a 6% reduction in natural forest cover (5965 ± 353.72 hectares). Sparse vegetation, including smallholder farms, decreased by 35% from 45,064 ± 163.79 hectares to 29,424 ± 114.81 hectares. Projections for 2030 and 2040 indicate minimal changes based on current trends; however, they do not consider potential impacts from climate change, large-scale development projects, and demographic shifts, necessitating cautious interpretation. The results highlight areas of stability and vulnerability within the understudied GAP region, offering critical insights for developing targeted conservation strategies. Additionally, the methodological framework, which combines optical, radar, and topographical data with machine learning, provides a robust approach for accurate and detailed landscape-scale monitoring of tropical peatlands that is applicable to other regions facing similar environmental challenges. [ABSTRACT FROM AUTHOR]

Human activities have both positive and negative impacts on forests, altering the extent and composition of various forest vegetation types, and increasing uncertainty in ecological management. A detailed understanding of the historical distribution of forest vegetation is crucial for local conservation efforts. In this study, we integrated phenological features with climatic and terrain variables to enhance the mapping accuracy of forest vegetation in Yunnan. We mapped the historical distributions of five forest vegetation type groups and nine specific forest vegetation types for 2001, 2010, and 2020. Our findings revealed that: (1) rubber plantations can be effectively distinguished from other forest vegetation using phenological features, coniferous forests and broad-leaved forests can be differentiated using visible spectral bands, and environmental variables (temperature, precipitation, and elevation) are effective in differentiating forest vegetation types under varying climate conditions; (2) the overall accuracy and kappa coefficient increased by 14.845% and 20.432%, respectively, when climatic variables were combined with phenological features, and by 13.613% and 18.902%, respectively, when elevation was combined with phenological features, compared to using phenological features alone; (3) forest cover in Yunnan increased by 2.069 × 104 km2 (10.369%) between 2001 and 2020. This study highlights the critical role of environmental variables in improving the mapping accuracy of forest vegetation in mountainous regions. [ABSTRACT FROM AUTHOR]

The precise acquisition of phenotypic parameters for individual trees in plantation forests is important for forest management and resource exploration. The use of Light-Detection and Ranging (LiDAR) technology mounted on Unmanned Aerial Vehicles (UAVs) has become a critical method for forest resource monitoring. Achieving the accurate segmentation of individual tree crowns (ITCs) from UAV LiDAR data remains a significant technical challenge, especially in broad-leaved plantations such as rubber plantations. In this study, we designed an individual tree segmentation framework applicable to dense rubber plantations with complex canopy structures. First, the feature extraction module of PointNet++ was enhanced to precisely extract understory branches. Then, a graph-based segmentation algorithm focusing on the extracted branch and trunk points was designed to segment the point cloud of the rubber plantation. During the segmentation process, a directed acyclic graph is constructed using components generated through grey image clustering in the forest. The edge weights in this graph are determined according to scores calculated using the topologies and heights of the components. Subsequently, ITC segmentation is performed by trimming the edges of the graph to obtain multiple subgraphs representing individual trees. Four different plots were selected to validate the effectiveness of our method, and the widths obtained from our segmented ITCs were compared with the field measurement. As results, the improved PointNet++ achieved an average recall of 94.6% for tree trunk detection, along with an average precision of 96.2%. The accuracy of tree-crown segmentation in the four plots achieved maximal and minimal R2 values of 98.2% and 92.5%, respectively. Further comparative analysis revealed that our method outperforms traditional methods in terms of segmentation accuracy, even in rubber plantations characterized by dense canopies with indistinct boundaries. Thus, our algorithm exhibits great potential for the accurate segmentation of rubber trees, facilitating the acquisition of structural information critical to rubber plantation management. [ABSTRACT FROM AUTHOR]

Powdery mildew significantly impacts the yield of natural rubber by being one of the predominant diseases that affect rubber trees. Accurate, non-destructive recognition of powdery mildew in the early stage is essential for the cultivation management of rubber trees. The objective of this study is to establish a technique for the early detection of powdery mildew in rubber trees by combining spectral and physicochemical parameter features. At three field experiment sites and in the laboratory, a spectroradiometer and a hand-held optical leaf-clip meter were utilized, respectively, to measure the hyperspectral reflectance data (350–2500 nm) and physicochemical parameter data of both healthy and early-stage powdery-mildew-infected leaves. Initially, vegetation indices were extracted from hyperspectral reflectance data, and wavelet energy coefficients were obtained through continuous wavelet transform (CWT). Subsequently, significant vegetation indices (VIs) were selected using the ReliefF algorithm, and the optimal wavelengths (OWs) were chosen via competitive adaptive reweighted sampling. Principal component analysis was used for the dimensionality reduction of significant wavelet energy coefficients, resulting in wavelet features (WFs). To evaluate the detection capability of the aforementioned features, the three spectral features extracted above, along with their combinations with physicochemical parameter features (PFs) (VIs + PFs, OWs + PFs, WFs + PFs), were used to construct six classes of features. In turn, these features were input into support vector machine (SVM), random forest (RF), and logistic regression (LR), respectively, to build early detection models for powdery mildew in rubber trees. The results revealed that models based on WFs perform well, markedly outperforming those constructed using VIs and OWs as inputs. Moreover, models incorporating combined features surpass those relying on single features, with an overall accuracy (OA) improvement of over 1.9% and an increase in F1-Score of over 0.012. The model that combines WFs and PFs shows superior performance over all the other models, achieving OAs of 94.3%, 90.6%, and 93.4%, and F1-Scores of 0.952, 0.917, and 0.941 on SVM, RF, and LR, respectively. Compared to using WFs alone, the OAs improved by 1.9%, 2.8%, and 1.9%, and the F1-Scores increased by 0.017, 0.017, and 0.016, respectively. This study showcases the viability of early detection of powdery mildew in rubber trees. [ABSTRACT FROM AUTHOR]

Powdery mildew is one of the most significant rubber tree diseases, with a substantial impact on the yield of natural rubber. This study aims to establish a detection approach that coupled continuous wavelet transform (CWT) and machine learning for the accurate assessment of powdery mildew severity in rubber trees. In this study, hyperspectral reflectance data (350–2500 nm) of healthy and powdery mildew-infected leaves were measured with a spectroradiometer in a laboratory. Subsequently, three types of wavelet features (WFs) were extracted using CWT. They were as follows: WFs dimensionally reduced by the principal component analysis (PCA) of significant wavelet energy coefficients (PCA-WFs); WFs extracted from the top 1% of the determination coefficient between wavelet energy coefficients and the powdery mildew disease class (1%R2-WFs); and all WFs at a single decomposition scale (SS-WFs). To assess the detection capability of the WFs, the three types of WFs were input into the random forest (RF), support vector machine (SVM), and back propagation neural network (BPNN), respectively. As a control, 13 optimal traditional spectral features (SFs) were extracted and combined with the same classification methods. The results revealed that the WF-based models all performed well and outperformed those based on SFs. The models constructed based on PCA-WFs had a higher accuracy and more stable performance than other models. The model combined PCA-WFs with RF exhibited the optimal performance among all models, with an overall accuracy (OA) of 92.0% and a kappa coefficient of 0.90. This study demonstrates the feasibility of combining CWT with machine learning in rubber tree powdery mildew detection. [ABSTRACT FROM AUTHOR]

To address the practical navigation issues of rubber-tapping robots, this paper proposes an active navigation system guided by trunk detection for a rubber-tapping robot. A tightly coupled sliding-window-based factor graph method is proposed for pose tracking, which introduces normal distribution transform (NDT) measurement factors, inertial measurement unit (IMU) pre-integration factors, and prior factors generated by sliding window marginalization. To actively pursue goals in navigation, a distance-adaptive Euclidean clustering method is utilized in conjunction with cylinder fitting and composite criteria screening to identify tree trunks. Additionally, a hybrid map navigation approach involving 3D point cloud map localization and 2D grid map planning is proposed to apply these methods to the robot. Experiments show that our pose-tracking approach obtains generally better performance in accuracy and robustness compared to existing methods. The precision of our trunk detection method is 93% and the recall is 87%. A practical validation is completed in robot rubber-tapping tasks of a real rubber plantation. The proposed method can guide the rubber-tapping robot in complex forest environments and improve efficiency. [ABSTRACT FROM AUTHOR]

Rubber (Hevea brasiliensis Muell.) plantations are among the most critical agricultural ecosystems in tropical regions, playing a vital role in regional carbon balance. Accurate large-scale biomass estimation for these plantations remains a challenging task due to the severe signal saturation problem. Recent advances in remote sensing big data, cloud platforms, and machine learning have facilitated the precise acquisition of key physiological variables, such as stand age (A) and canopy height (H), which are critical parameters for biomass estimation but have been underutilized in prior studies. Using Hainan Island—the second-largest rubber planting base in China—as a case study, we integrated extensive ground surveys, maps of stand age and canopy height, remote sensing indicators (RSIs), and geographical and climate indicators (ECIs) to ascertain the optimal method for estimating rubber plantation biomass. We compared different inputs and estimation approaches (direct and indirect) using the random forest algorithm and analyzed the spatiotemporal characteristics of rubber plantation biomass on Hainan Island. The results indicated that the traditional model (RSIs + ECIs) had low accuracy and significant estimation bias (R2 = 0.24, RMSE = 38.36 mg/ha). The addition of either stand age or canopy height considerably enhance model accuracy (R2 = 0.77, RMSE ≈ 21.12 mg/ha). Moreover, incorporating the DBH obtained through indirect inversion yielded even greater predictive accuracy (R2 = 0.97, RMSE = 7.73 mg/ha), outperforming estimates derived from an allometric equation model input with the DBH (R2 = 0.67, RMSE = 25.43 mg/ha). However, augmenting the model with stand age, canopy height, or their combination based on RSIs, ECIs, and DBH only marginally improved the accuracy. Consequently, it is not recommended in scenarios with limited data and computing resources. Employing the optimal model, we generated biomass maps of rubber plantations on Hainan Island for 2016 and 2020, revealing that the spatiotemporal distribution pattern of the biomass is closely associated with the establishment year of the rubber plantations. While average biomass in a few areas has undergone slight decreases, total biomass has exhibited significant growth, reaching 5.46 × 107 mg by the end of 2020, underscoring its considerable value as a carbon sink. [ABSTRACT FROM AUTHOR]

The continuous transformation from biodiverse natural forests and mixed-use farms into monoculture rubber plantations may lead to a series of hazards, such as natural forest habitats fragmentation, biodiversity loss, as well as drought and water shortage. Therefore, understanding the spatial distribution of rubber plantations is crucial to regional ecological security and a sustainable economy. However, the spectral characteristics of rubber tree is easily mixed with other vegetation such as natural forests, tea plantations, orchards and shrubs, which brings difficulty and uncertainty to regional scale identification. In this paper, we proposed a classification method combines multi-source phenology characteristics and random forest algorithm. On the basis of optimization of input samples and features, phenological spectrum, brightness, greenness, wetness, fractional vegetation cover, topography and other features of rubber were extracted. Five classification schemes were constructed for comparison, and the one with the highest classification accuracy was used to identify the spatial pattern of rubber plantations in 2014, 2016, 2018 and 2020 in Xishuangbanna. The results show that: (1) the identification results are in consistent with field survey and rubber plantations area generally shows a first increasing and then decreasing trend; (2) the Overall Accuracy (OA) and Kappa coefficient of the proposed method are 90.0% and 0.86, respectively, with a Producer's Accuracy (PA) and User's Accuracy (UA) of 95.2% and 88.8%, respectively; (3) cross-validation was employed to analyze the accuracy evaluation indexes of the identification results: both PA and UA of the rubber plantations stay stable over 85%, with the minimum fluctuation and best stability of UA value. The OA value and Kappa coefficient were stable in the range of 0.88–0.90 and 0.84–0.86, respectively. The method proposed provides reliable results on spatial distribution of rubber, and is potentially transferable to other mountainous areas as a robust approach for rapid monitoring of rubber plantations. [ABSTRACT FROM AUTHOR]

Mapping rubber plantations in a large area is still challenging in high-cloud-cover and complex-vegetation landscapes. Existing studies were often confined to the discrimination of rubber trees from natural forests and rarely concerned other tropical tree species. The Sentinel-2 constellation, with improved spatial, spectral, and temporal resolution, offers new opportunities to improve previous efforts. In this paper, four Hainan Sentinel-2 composites were generated based on the detailed phenological stages delineation of rubber trees. The random forest classifier with different phenological stage combinations was utilized to discuss the capability of Sentinel-2 composites to map rubber plantations. The optimal resultant rubber plantation map had a producer's accuracy, user's accuracy, and F1 score of 81%, 84.4%, and 0.83, respectively. According to the rubber plantation map in 2020, there was a total of 5473 km2 rubber plantations in Hainan, which was 2.93% higher than the statistical data from the Hainan Statistical Yearbook. According to the Hainan Statistical Yearbook, the area-weighted accuracy at the county level was 82.47%. The mean decrease in accuracy (MDA) was used to assess the feature importance of the four phenological stages. Results showed that the recovery growth stage played the most important role, and the resting stage was the least important. Moreover, in terms of the combinations of phenological stages, any dataset group with two phenological stages was sufficient for rubber tree discrimination. These findings were instrumental in facilitating the rubber plantation mapping annually. This study has demonstrated the potential of Sentinel-2 data, with the phenology-based image-compositing technique, for mapping rubber plantations in large areas with complex vegetation landscapes. [ABSTRACT FROM AUTHOR]

Rubber (Hevea brasiliensis Muell.) plantations are among the most critical agricultural ecosystems in tropical regions, playing a vital role in regional carbon balance. Accurate large-scale biomass estimation for these plantations remains a challenging task due to the severe signal saturation problem. Recent advances in remote sensing big data, cloud platforms, and machine learning have facilitated the precise acquisition of key physiological variables, such as stand age (A) and canopy height (H), which are critical parameters for biomass estimation but have been underutilized in prior studies. Using Hainan Island—the second-largest rubber planting base in China—as a case study, we integrated extensive ground surveys, maps of stand age and canopy height, remote sensing indicators (RSIs), and geographical and climate indicators (ECIs) to ascertain the optimal method for estimating rubber plantation biomass. We compared different inputs and estimation approaches (direct and indirect) using the random forest algorithm and analyzed the spatiotemporal characteristics of rubber plantation biomass on Hainan Island. The results indicated that the traditional model (RSIs + ECIs) had low accuracy and significant estimation bias (R2 = 0.24, RMSE = 38.36 mg/ha). The addition of either stand age or canopy height considerably enhance model accuracy (R2 = 0.77, RMSE ≈ 21.12 mg/ha). Moreover, incorporating the DBH obtained through indirect inversion yielded even greater predictive accuracy (R2 = 0.97, RMSE = 7.73 mg/ha), outperforming estimates derived from an allometric equation model input with the DBH (R2 = 0.67, RMSE = 25.43 mg/ha). However, augmenting the model with stand age, canopy height, or their combination based on RSIs, ECIs, and DBH only marginally improved the accuracy. Consequently, it is not recommended in scenarios with limited data and computing resources. Employing the optimal model, we generated biomass maps of rubber plantations on Hainan Island for 2016 and 2020, revealing that the spatiotemporal distribution pattern of the biomass is closely associated with the establishment year of the rubber plantations. While average biomass in a few areas has undergone slight decreases, total biomass has exhibited significant growth, reaching 5.46 × 107 mg by the end of 2020, underscoring its considerable value as a carbon sink.

The continuous transformation from biodiverse natural forests and mixed-use farms into monoculture rubber plantations may lead to a series of hazards, such as natural forest habitats fragmentation, biodiversity loss, as well as drought and water shortage. Therefore, understanding the spatial distribution of rubber plantations is crucial to regional ecological security and a sustainable economy. However, the spectral characteristics of rubber tree is easily mixed with other vegetation such as natural forests, tea plantations, orchards and shrubs, which brings difficulty and uncertainty to regional scale identification. In this paper, we proposed a classification method combines multi-source phenology characteristics and random forest algorithm. On the basis of optimization of input samples and features, phenological spectrum, brightness, greenness, wetness, fractional vegetation cover, topography and other features of rubber were extracted. Five classification schemes were constructed for comparison, and the one with the highest classification accuracy was used to identify the spatial pattern of rubber plantations in 2014, 2016, 2018 and 2020 in Xishuangbanna. The results show that: (1) the identification results are in consistent with field survey and rubber plantations area generally shows a first increasing and then decreasing trend; (2) the Overall Accuracy (OA) and Kappa coefficient of the proposed method are 90.0% and 0.86, respectively, with a Producer’s Accuracy (PA) and User’s Accuracy (UA) of 95.2% and 88.8%, respectively; (3) cross-validation was employed to analyze the accuracy evaluation indexes of the identification results: both PA and UA of the rubber plantations stay stable over 85%, with the minimum fluctuation and best stability of UA value. The OA value and Kappa coefficient were stable in the range of 0.88–0.90 and 0.84–0.86, respectively. The method proposed provides reliable results on spatial distribution of rubber, and is potentially transferable to other mountainous areas as a robust approach for rapid monitoring of rubber plantations.

Mapping rubber plantations in a large area is still challenging in high-cloud-cover and complex-vegetation landscapes. Existing studies were often confined to the discrimination of rubber trees from natural forests and rarely concerned other tropical tree species. The Sentinel-2 constellation, with improved spatial, spectral, and temporal resolution, offers new opportunities to improve previous efforts. In this paper, four Hainan Sentinel-2 composites were generated based on the detailed phenological stages delineation of rubber trees. The random forest classifier with different phenological stage combinations was utilized to discuss the capability of Sentinel-2 composites to map rubber plantations. The optimal resultant rubber plantation map had a producer’s accuracy, user’s accuracy, and F1 score of 81%, 84.4%, and 0.83, respectively. According to the rubber plantation map in 2020, there was a total of 5473 km2 rubber plantations in Hainan, which was 2.93% higher than the statistical data from the Hainan Statistical Yearbook. According to the Hainan Statistical Yearbook, the area-weighted accuracy at the county level was 82.47%. The mean decrease in accuracy (MDA) was used to assess the feature importance of the four phenological stages. Results showed that the recovery growth stage played the most important role, and the resting stage was the least important. Moreover, in terms of the combinations of phenological stages, any dataset group with two phenological stages was sufficient for rubber tree discrimination. These findings were instrumental in facilitating the rubber plantation mapping annually. This study has demonstrated the potential of Sentinel-2 data, with the phenology-based image-compositing technique, for mapping rubber plantations in large areas with complex vegetation landscapes.

Rubber (Hevea brasiliensis Muell.) plantations constitute one of the most important agro-ecosystems in the tropical region of China and Southeast Asia, playing an important role in the carbon budget there. Accurately obtaining their biomass over a large area is challenging because of difficulties in acquiring the Diameter at Breast Height (DBH) through remote sensing and the problem of biomass saturation. The stand age, which is closely related to the forest biomass, was proposed for biomass estimation in this study. A stand age map at an annual scale for Hainan Island, which is the second largest natural rubber production base in China, was generated using all Landsat and Sentinel-2 (LS2) data (1987–2017). Scatter plots and the correlation coefficient method were used to explore the relationship (e.g., biomass saturation) between rubber biomass and different LS2-based variables. Subsequently, a regression model fitted with the stand age (R2 = 0.96) and a Random Forest (RF) model parameterizing with LS2-based variables and/or the stand age were respectively employed to estimate rubber biomass for Hainan Island. The results show that rubber biomass was saturated around 65 Mg/ha with all LS2-based variables. The regression model estimated biomass accurately (R2 = 0.79 and Root Mean Square Error (RMSE) = 14.00 Mg/ha) and eliminated the saturation problem significantly. In addition to LS2-based variables, adding a stand age parameter to the RF models was found to significantly improve the prediction accuracy (R2 = 0.82–0.96 and RMSE = 4.08–10.59 Mg/ha, modeling using samples of different biomass sizes). However, all RF models overestimated the biomass of young plantations and underestimated the biomass of old plantations. A hybrid model integrating the optimal results of RF and regression models reduced estimation bias and generated the best performance (R2 = 0.83 and RMSE = 12.48 Mg/ha). The total rubber biomass of Hainan Island in 2017 was about 5.40 × 107 Mg. The northward and westward expansions after 2000 had great impact on the biomass distribution, leading to a higher biomass density for the inland coastal strip from south to northeast and a lower biomass density in the northern and western regions.

Accurate and up-to-date mapping and monitoring of rubber plantations is challenging. In this study, we presented a simple method for rapidly and accurately mapping rubber plantations in the Xishuangbanna region of southwest China using phenology-based vegetation index differencing. Temporal profiles of the Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Atmospherically Resistant Vegetation Index (ARVI), Normalized Difference Moisture Index (NDMI), and Tasselled Cap Greenness (TCG) for rubber trees, natural forests and croplands were constructed using 11 Landsat 8 OLI images acquired within one year. These vegetation index time series accurately demonstrated the unique seasonal phenological dynamics of rubber trees. Two distinct phenological phases (i.e., defoliation and foliation) of rubber trees were clearly distinguishable from natural forests and croplands. Rubber trees undergo a brief defoliation-foliation process between late December and mid-March. Therefore, vegetation index differencing between the nearly complete defoliation (leaf-off) and full foliation (leaf flushing) phases was used to delineate rubber plantations within fragmented tropical mountainous landscapes. The method presented herein greatly improved rubber plantation classification accuracy. Overall classification accuracies derived from the differences of the five vegetation indices varied from 92% to 96% with corresponding kappa coefficients of 0.84–0.92. These results demonstrate the promising potential of phenology-based vegetation index differencing for mapping and monitoring rubber expansion at the regional scale.

Accurate and updated finer resolution maps of rubber plantations and stand ages are needed to understand and assess the impacts of rubber plantations on regional ecosystem processes. This study presented a simple method for mapping rubber plantation areas and their stand ages by integration of PALSAR 50-m mosaic images and multi-temporal Landsat TM/ETM+ images. The L-band PALSAR 50-m mosaic images were used to map forests (including both natural forests and rubber trees) and non-forests. For those PALSAR-based forest pixels, we analyzed the multi-temporal Landsat TM/ETM+ images from 2000 to 2009. We first studied phenological signatures of deciduous rubber plantations (defoliation and foliation) and natural forests through analysis of surface reflectance, Normal Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), and Land Surface Water Index (LSWI) and generated a map of rubber plantations in 2009. We then analyzed phenological signatures of rubber plantations with different stand ages and generated a map, in 2009, of rubber plantation stand ages (≤5, 6–10, >10 years-old) based on multi-temporal Landsat images. The resultant maps clearly illustrated how rubber plantations have expanded into the mountains in the study area over the years. The results in this study demonstrate the potential of integrating microwave (e.g., PALSAR) and optical remote sensing in the characterization of rubber plantations and their expansion over time.

The increasing expansion of rubber plantations throughout East and Southeast Asia urgently requires improved methods for effective mapping and monitoring. The phenological information from rubber plantations was found effective in rubber mapping. Previous studies have mostly applied rule-pixel-based phenology approaches for rubber plantations mapping, which might result in broken patches in fragmented landscapes. This study introduces a new paradigm by combining phenology information with object-based classification to map fragmented patches of rubber plantations in Xishuangbanna. This research first delineated the time windows of the defoliation and foliation phases of rubber plantations by acquiring the temporal profile and phenological features of rubber plantations and natural forests through the Moderate Resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) data. To investigate the ability of finer resolution images at capturing the temporal profile or phenological information, 30 m resolution Landsat image data were used to capture the temporal profile, and a phenology algorithm to separate rubber plantations and natural forests was then defined. The derived phenology algorithm was used by both the object-based and pixel-based classification to investigate whether the object-based approach could improve the mapping accuracy. Whether adding the phenology information to the object-based classification could improve rubber plantation mapping accuracy in mountainous Xishuangbanna was also investigated. This resulted in three approaches: rule-pixel-based phenology, rule-object-based phenology, and nearest-neighbor-object-based phenology. The results showed that the rule-object-based phenology approaches (with overall accuracy 77.5% and Kappa Coefficients of 0.66) and nearest-neighbor-object-based phenology approach (91.0% and 0.86) achieved a higher accuracy than that of the rule-pixel-based phenology approach (72.7% and 0.59). The results proved that (1) object-based approaches could improve the accuracy of rubber plantation mapping compared to the pixel-based approach and (2) incorporating the phenological information from vegetation improved the overall accuracy of the thematic map. [ABSTRACT FROM AUTHOR]

Since the Chinese government carried out the reform and opening up policy, Xishuangbanna Dai Autonomous Prefecture has experienced rapid urbanization and dramatic land use change. This research aims at analyzing urban expansion in Xishuangbanna and its impact on the land use pattern using combined methods, including radar graph, the gradient-direction method and landscape metrics. Seven land use maps from 1976 to 2015 were generated and analyzed, respectively. The results showed that urban and rubber expanded rapidly, while forest decreased during the last 40 years. The city proper, the county town of Menghai and the county town of Mengla showed the most significant and fastest urban expansion rates. In response to rapid urban expansion, land use types outside urban areas changed dramatically. In Jinghong and Mengla, urban areas were usually surrounded by paddy, shrub, rubber and forest in 1976, while most areas were dominated by rubber by 2015. With the development of Xishuangbanna, landscape diversity increased along urban-rural gradients, but decreased in some key urban areas. Urban expansion slightly reduced the connectivity of forest and increased agglomeration of rubber at the same time. Based on the analyses above, we moved forward to discuss the consequences of urban expansion, rubber plantations and land fragmentation. [ABSTRACT FROM AUTHOR]

We developed and evaluated a new approach for mapping rubber plantations and natural forests in one of Southeast Asia’s biodiversity hot spots, Xishuangbanna in China. We used a one-year annual time series of Moderate Resolution Imaging Spectroradiometer (MODIS), Enhanced Vegetation Index (EVI) and short-wave infrared (SWIR) reflectance data to develop phenological metrics. These phenological metrics were used to classify rubber plantations and forests with the Random Forest classification algorithm. We evaluated which key phenological characteristics were important to discriminate rubber plantations and natural forests by estimating the influence of each metric on the classification accuracy. As a benchmark, we compared the best classification with a classification based on the full, fitted time series data. Overall classification accuracies derived from EVI and SWIR time series alone were 64.4% and 67.9%, respectively. Combining the phenological metrics from EVI and SWIR time series improved the accuracy to 73.5%. Using the full, smoothed time series data instead of metrics derived from the time series improved the overall accuracy only slightly (1.3%), indicating that the phenological metrics were sufficient to explain the seasonal changes captured by the MODIS time series. The results demonstrate a promising utility of phenological metrics for mapping and monitoring rubber expansion with MODIS.

Knowing the stand age of rubber tree (Hevea brasiliensis) plantations is vitally important for best management practices, estimations of rubber latex yields, and carbon cycle studies (e.g., biomass, carbon pools, and fluxes). However, the stand age (as estimated from the establishment year of rubber plantation) is not available across large regions. In this study, we analyzed Landsat time series images from 1987–2015 and developed algorithms to identify (1) the establishment year of rubber plantations; and (2) the pre-conversion land cover types, such as old rubber plantations, evergreen forests, and cropland. Exposed soil during plantation establishment and linear increases in canopy closure during non-production periods (rubber seedling to mature plantation) were used to identify the establishment year of rubber plantations. Based on the rubber plantation map for 2015 (overall accuracy = 97%), and 1981 Landsat images since 1987, we mapped the establishment year of rubber plantations on Hainan Island (R2 = 0.85/0.99, and RMSE = 2.34/0.54 years at pixel/plantation scale). The results show that: (1) significant conversion of croplands and old rubber plantations to new rubber plantations has occurred substantially in the northwest and northern regions of Hainan Island since 2000, while old rubber plantations were mainly distributed in the southeastern inland strip; (2) the pattern of rubber plantation expansion since 1987 consisted of fragmented plantations from smallholders, and there was no tendency to expand towards a higher altitude and steep slope regions; (3) the largest land source for new rubber plantations since 1988 was old rubber plantations (1.26 × 105 ha), followed by cropland (0.95 × 105 ha), and evergreen forests (0.68 × 105 ha). The resultant algorithms and maps of establishment year and pre-conversion land cover types are likely to be useful in plantation management, and ecological assessments of rubber plantation expansion in China.

Quickly and accurately understanding the spatial distribution of regional rubber resources is of great practical significance. Using the unique phenological characteristics of rubber trees derived from remotely sensed data is a common effective method for monitoring rubber trees. However, due to the lack of high-quality images available during the key phenological period, it is still very difficult to apply this method in practical applications. PlanetScope data with high temporal (daily) resolution have great advantages in acquiring high-quality images, but these images have not been previously used to monitor rubber plantations. In this paper, multitemporal PlanetScope images were used as data sources, and the spectral features, index features, first principal components, and textural features of the images were comprehensively utilized. Four classification methods, including a pixel-based random forest (RF) approach, pixel-based support vector machine (SVM) approach, object-oriented RF approach and object-oriented SVM approach, were utilized to discuss the feasibility of using PlanetScope data to monitor rubber forests. The results showed that the optimal time window for monitoring rubber forests in the study area spanned from the 49th day to the 65th day of 2019 according to the MODIS-NDVI analysis. The contribution rate of the difference in the modified simple ratio (dMSR) feature was largest among all considered features for all pixel-based and object-oriented methods. The object-oriented RF/SVM classification method achieved the best classification results with an overall accuracy of 93.87% and a Kappa index of agreement (KIA) of 0.92. The highest producer's accuracy and user's accuracy obtained with this method were 95.18% for rubber plantations. The results of this study show that it is feasible to use PlanetScope data to perform rubber monitoring, thus effectively solving the problem of missing images in the optimal rubber monitoring period; additionally, this method can be extended to other real-life applications. [ABSTRACT FROM AUTHOR]

Over the last 18 years, Indonesia has experienced significant deforestation due to the expansion of oil palm and rubber plantations. Accurate land cover maps are essential for policymakers to track and manage land change to support sustainable forest management and investment decisions. An automatic digital processing (ADP) method is currently used to develop land cover change maps for Indonesia, based on optical imaging (Landsat). Such maps produce only forest and non-forest classes, and often oil palm and rubber plantations are misclassified as native forests. To improve accuracy of these land cover maps, this study developed oil palm and rubber plantation discrimination indices using the integration of Landsat-8 and synthetic aperture radar Sentinel-1 images. Sentinel-1 VH and VV difference (>7.5 dB) and VH backscatter intensity were used to discriminate oil palm plantations. A combination of Landsat-8 NDVI, NDMI with Sentinel-1 VV and VH were used to discriminate rubber plantations. The improved map produced four land cover classes: native forest, oil palm plantation, rubber plantation, and non-forest. High-resolution SPOT 6/7 imagery and ground truth data were used for validation of the new classified maps. The map had an overall accuracy of 92%; producer's accuracy for all classes was higher than 90%, except for rubber (65%), and user's accuracy was over 80% for all classes. These results demonstrate that indices developed from a combination of optical and radar images can improve our ability to discriminate between native forest and oil palm and rubber plantations in the tropics. The new mapping method will help to support Indonesia's national forest monitoring system and inform monitoring of plantation expansion. [ABSTRACT FROM AUTHOR]

Many Indonesian forests have been cleared and replaced by fast-growing cash crops (e.g., oil palm and rubber plantations), altering the vegetation structure of entire regions. Complex vegetation structure provides habitat niches to a large number of native species. Airborne laser scanning (ALS) can provide detailed three-dimensional information on vegetation structure. Here, we investigate the potential of ALS metrics to highlight differences across a gradient of land-use management intensities in Sumatra, Indonesia. We focused on tropical rainforests, jungle rubber, rubber plantations, oil palm plantations and transitional lands. Twenty-two ALS metrics were extracted from 183 plots. Analysis included a principal component analysis (PCA), analysis of variance (ANOVAs) and random forest (RF) characterization of the land use/land cover (LULC). Results from the PCA indicated that a greater number of canopy gaps are associated with oil palm plantations, while a taller stand height and higher vegetation structural metrics were linked with rainforest and jungle rubber. A clear separation in metrics performance between forest (including rainforest and jungle rubber) and oil palm was evident from the metrics pairwise comparison, with rubber plantations and transitional land behaving similar to forests (rainforest and jungle rubber) and oil palm plantations, according to different metrics. Lastly, two RF models were carried out: one using all five land uses (5LU), and one using four, merging jungle rubber with rainforest (4LU). The 5LU model resulted in a lower overall accuracy (51.1%) due to mismatches between jungle rubber and forest, while the 4LU model resulted in a higher accuracy (72.2%). Our results show the potential of ALS metrics to characterize different LULCs, which can be used to track changes in land use and their effect on ecosystem functioning, biodiversity and climate. [ABSTRACT FROM AUTHOR]

Most natural rubber trees (Hevea brasiliensis) are grown on plantations, making rubber an important industrial crop. Rubber plantations are also an important source of household income for over 20 million people. The accurate mapping of rubber plantations is important for both local governments and the global market. Remote sensing has been a widely used approach for mapping rubber plantations, typically using optical remote sensing data obtained at the regional scale. Improving the efficiency and accuracy of rubber plantation maps has become a research hotspot in rubber-related literature. To improve the classification efficiency, researchers have combined the phenology, geography, and texture of rubber trees with spectral information. Among these, there are three main classifiers: maximum likelihood, QUEST decision tree, and random forest methods. However, until now, no comparative studies have been conducted for the above three classifiers. Therefore, in this study, we evaluated the mapping accuracy based on these three classifiers, using four kinds of data input: Landsat spectral information, phenology–Landsat spectral information, topography–Landsat spectral information, and phenology–topography–Landsat spectral information. We found that the random forest method had the highest mapping accuracy when compared with the maximum likelihood and QUEST decision tree methods. We also found that adding either phenology or topography could improve the mapping accuracy for rubber plantations. When either phenology or topography were added as parameters within the random forest method, the kappa coefficient increased by 5.5% and 6.2%, respectively, compared to the kappa coefficient for the baseline Landsat spectral band data input. The highest accuracy was obtained from the addition of both phenology–topography–Landsat spectral bands to the random forest method, achieving a kappa coefficient of 97%. We therefore mapped rubber plantations in Xishuangbanna using the random forest method, with the addition of phenology and topography information from 1990–2020. Our results demonstrated the usefulness of integrating phenology and topography for mapping rubber plantations. The machine learning approach showed great potential for accurate regional mapping, particularly by incorporating plant habitat and ecological information. We found that during 1990–2020, the total area of rubber plantations had expanded to over three times their former area, while natural forests had lost 17.2% of their former area. [ABSTRACT FROM AUTHOR]

Rubber (Hevea brasiliensis) is a tropical tree crop cultivated for the industrial production of latex. The trees are tall, perennial and long-lived, and are typically grown in plantations. In most rubber-producing countries, smallholders account for more than 85% of plantation area. Traditional practices mean that it can be difficult to monitor rubber plantations for management purposes. To overcome issues associated with monitoring traditional practices, remote sensing approaches have been successfully applied in this field. However, information on this is lacking. Therefore, this study aims to document the current status, history, development and prospects for remote sensing applications in rubber plantations by using the PRISMA framework. The review focuses on the application of optical remote sensing data in rubber. In this paper, we discuss the current role of remote sensing on specific subject areas, namely mapping, change detection, stand age estimation, carbon and biomass assessment, leaf area index (LAI) prediction and disease detection. In addition, we elaborate on the benefits gained and challenges faced while adapting this technology. These include the availability and free access to satellite imagery as the greatest benefit and the presence of clouds as one of the toughest challenges. Finally, we highlighted four potential areas where future work can be done: (1) Advancements in remote sensing data, (2) algorithm enhancements, (3) emerging processing platforms, and (4) application to less studied subject areas. This paper gives insight into strengthening the potential of remote sensing for delivering efficient and long-term services for rubber plantations. [ABSTRACT FROM AUTHOR]

Rubber (Hevea brasiliensis Muell.) plantations constitute one of the most important agro-ecosystems in the tropical region of China and Southeast Asia, playing an important role in the carbon budget there. Accurately obtaining their biomass over a large area is challenging because of difficulties in acquiring the Diameter at Breast Height (DBH) through remote sensing and the problem of biomass saturation. The stand age, which is closely related to the forest biomass, was proposed for biomass estimation in this study. A stand age map at an annual scale for Hainan Island, which is the second largest natural rubber production base in China, was generated using all Landsat and Sentinel-2 (LS2) data (1987–2017). Scatter plots and the correlation coefficient method were used to explore the relationship (e.g., biomass saturation) between rubber biomass and different LS2-based variables. Subsequently, a regression model fitted with the stand age (R2 = 0.96) and a Random Forest (RF) model parameterizing with LS2-based variables and/or the stand age were respectively employed to estimate rubber biomass for Hainan Island. The results show that rubber biomass was saturated around 65 Mg/ha with all LS2-based variables. The regression model estimated biomass accurately (R2 = 0.79 and Root Mean Square Error (RMSE) = 14.00 Mg/ha) and eliminated the saturation problem significantly. In addition to LS2-based variables, adding a stand age parameter to the RF models was found to significantly improve the prediction accuracy (R2 = 0.82–0.96 and RMSE = 4.08–10.59 Mg/ha, modeling using samples of different biomass sizes). However, all RF models overestimated the biomass of young plantations and underestimated the biomass of old plantations. A hybrid model integrating the optimal results of RF and regression models reduced estimation bias and generated the best performance (R2 = 0.83 and RMSE = 12.48 Mg/ha). The total rubber biomass of Hainan Island in 2017 was about 5.40 × 107 Mg. The northward and westward expansions after 2000 had great impact on the biomass distribution, leading to a higher biomass density for the inland coastal strip from south to northeast and a lower biomass density in the northern and western regions. [ABSTRACT FROM AUTHOR]

Knowing the stand age of rubber tree (Hevea brasiliensis) plantations is vitally important for best management practices, estimations of rubber latex yields, and carbon cycle studies (e.g., biomass, carbon pools, and fluxes). However, the stand age (as estimated from the establishment year of rubber plantation) is not available across large regions. In this study, we analyzed Landsat time series images from 1987–2015 and developed algorithms to identify (1) the establishment year of rubber plantations; and (2) the pre-conversion land cover types, such as old rubber plantations, evergreen forests, and cropland. Exposed soil during plantation establishment and linear increases in canopy closure during non-production periods (rubber seedling to mature plantation) were used to identify the establishment year of rubber plantations. Based on the rubber plantation map for 2015 (overall accuracy = 97%), and 1981 Landsat images since 1987, we mapped the establishment year of rubber plantations on Hainan Island (R2 = 0.85/0.99, and RMSE = 2.34/0.54 years at pixel/plantation scale). The results show that: (1) significant conversion of croplands and old rubber plantations to new rubber plantations has occurred substantially in the northwest and northern regions of Hainan Island since 2000, while old rubber plantations were mainly distributed in the southeastern inland strip; (2) the pattern of rubber plantation expansion since 1987 consisted of fragmented plantations from smallholders, and there was no tendency to expand towards a higher altitude and steep slope regions; (3) the largest land source for new rubber plantations since 1988 was old rubber plantations (1.26 × 105 ha), followed by cropland (0.95 × 105 ha), and evergreen forests (0.68 × 105 ha). The resultant algorithms and maps of establishment year and pre-conversion land cover types are likely to be useful in plantation management, and ecological assessments of rubber plantation expansion in China. [ABSTRACT FROM AUTHOR]