Search

Aircraft icing refers to the accumulation of ice on the surface and components of an aircraft when supercooled water droplets collide with the aircraft above freezing levels (at altitudes at which the temperature is below 0 °C), which requires vigilant monitoring to avert aviation accidents attributable to icing. In response to this imperative, the Weather Radar Center (WRC) of the Korea Meteorological Administration (KMA) has developed a real-time icing detection algorithm. We utilized 3D dual-polarimetric radar variables, 3D atmospheric variables, and aircraft icing data and statistically analyzed these variables within the icing areas determined by aircraft icing data from 2018–2022. An algorithm capable of detecting icing potential areas (icing potential) was formulated by applying these characteristics. Employing this detection algorithm enabled the classification of icing potential into three stages: precipitation, icing caution, and icing warning. The algorithm was validated, demonstrating a notable performance with a probability of detection value of 0.88. The algorithm was applied to three distinct icing cases under varying environmental conditions—frontal, stratiform, and cumuliform clouds—thereby offering real-time observable icing potential across the entire Korean Peninsula. [ABSTRACT FROM AUTHOR]

In the realm of short-range radar applications, the focus on detecting "low, slow, and small" (LSS) targets has escalated, marking a pivotal aspect of critical area defense. This study pioneers the use of one-dimensional convolutional neural networks (1D-CNNs) for direct slow-time dimension radar feature extraction, sidestepping the complexity tied to frequency and wavelet domain transformations. It innovatively employs a network architecture enriched with multi-frequency multi-scale deformable convolution (MFMSDC) layers for nuanced feature extraction, integrates attention modules to foster comprehensive feature connectivity, and leverages linear operations to curtail overfitting. Through comparative evaluations and ablation studies, our methodology not only simplifies the analytic process but also demonstrates superior classification capabilities. This establishes a new benchmark for efficiently classifying low-altitude entities, such as birds and unmanned aerial vehicles (UAVs), thereby enhancing the precision and operational efficiency of radar detection systems. [ABSTRACT FROM AUTHOR]

There is growing demand for the high-fidelity characterization of satellites in Geosynchronous Earth Orbit (GEO) to support Space Domain Awareness (SDA). This is particularly true for newly launched satellites, where it is necessary for satellite providers to ascertain whether components have deployed properly. Conventional wideband radar systems are capable of imaging satellites provided that (i) they have sufficient power aperture and bandwidth, and (ii) they observe enough target aspect change to generate a resolved image. While wideband radars are used routinely for characterizing satellites in Low-Earth Orbit (LEO), powerful radars with sensitivity sufficient for large GEO ranges (36,000 km or greater) are lacking. Thus, researchers often rely on more widely available high-power narrowband tracking radars for GEO characterization. In this paper, we present a novel range-Doppler-time (RDT) tensor processing technique for GEO characterization with narrowband radar. This technique encapsulates the strengths of previously proposed methods for narrowband-radar characterization at GEO, providing a generalized approach that can be applied in a variety of settings. The technique generates fully resolved 2D images of rotating GEO satellites in low-bandwidth scenarios. In cases where aspect change is limited, the technique provides detailed Doppler information for enhanced satellite status monitoring. This work presents a comprehensive quantitative analysis of the technique that considers the impact of key parameters on characterization performance. Simulated radar data, and radar data collected in a compact range on a scaled satellite model, are used to evaluate the technique. [ABSTRACT FROM AUTHOR]

Joint transceiver beamforming is a fundamental and crucial research task in the field of signal processing. Despite extensive efforts made in recent years, the joint transceiver beamforming of frequency diverse array (FDA)-based multiple-input and multiple-output (MIMO) radar has received relatively less attention and is confronted with some tricky challenges, such as range–angle decoupling and the interaction between multiple performance metrics. In this paper, we initially derive the generalized ambiguity function of the FDA-MIMO radar to explore the intrinsic correlation between its waveform design and resolution. Following that, the joint beamforming optimization is formulated as a nonconvex bivariate quadratic programming problem (NBQP) with the aim of maximizing the Signal-to-Interference-Noise Ratio (SINR) of the FDA-MIMO radar system. Building upon this, we introduce an innovative alternating manifold optimization with nested iteration (AMO-NI) algorithm to address the NBQP. By incorporating manifold optimization into iterative updates of transmit waveform and receiving filter, the AMO-NI algorithm considers the interdependencies among the optimization variables. The algorithm efficiently and expeditiously finds global optimum solutions within a finite number of iterations. Compared with other methods, our approach yields a superior beampattern and higher SINR. [ABSTRACT FROM AUTHOR]

The proposed "Guanlan" ocean science satellite, led by China's Laoshan Laboratory, includes an interferometric radar altimeter (IRA) as a key payload. As an integral part of its development, an airborne IRA experiment was conducted on 6 November 2021, with a flight path of approximately 90 km in the South China Sea. This study investigates the IRA's ability to observe ocean sea surface height (SSH) across scales ranging from meters to mesoscale. The sea surface height anomaly (SSHA) of the IRA is aligned with the SSHA of the AVISO at scales greater than 30 km, but also demonstrates the ability to capture small-scale SSHA changes in two dimensions. We analyzed wavenumber spectra of SSHA obtained from the airborne IRA, ICESat-2, and SARAL/AltiKa satellite for this region. The results show a good agreement in power spectral density (PSD) levels between ICESat-2, SARAL/AltiKa and IRA at scales larger than 30 km. Within the submesoscale range of 1–10 km, the IRA SSHA spectrum exhibits a distinctly negative slope and the lowest energy level. The minimum PSD level of the IRA fell in the range of 10−4–10−3 m2/cycle/km, at scales around 1 km, which is more than an order of magnitude lower than that of ICESat-2, forming a spectral gap that is in agreement with the theoretical expectation. Furthermore, IRA-derived wave direction and significant wave height matched well with the MFWAM wave data. The results of this study underscore the considerable potential of airborne IRA in capturing SSHA across a range of scales, from oceanic waves to submesoscale. [ABSTRACT FROM AUTHOR]

The large quantity of resident space objects orbiting Earth poses a threat to safety and efficient operations in space. Radar sensors are well suited to detecting objects in space including decommissioned satellites and debris, whereas the more commonly used optical sensors are limited by daylight and weather conditions. Observations of three non-operational satellites using a VHF radar system are presented in this paper in the form of micro Doppler signatures associated with rotational motion. Micro Doppler signatures are particularly useful for characterising resident space objects at VHF given the limited bandwidth resulting in poor range resolution. Electromagnetic simulations of the micro Doppler signatures of the defunct satellites are also presented using simple computer-aided design (CAD) models to assist with interpretation of the radar observations. The simulated micro Doppler results are verified using the VHF radar data and provide insight into the attitude and spin axis of the three resident space objects. As future work, this approach will be extended to a larger number of resident space objects which requires a automated processing. [ABSTRACT FROM AUTHOR]

The Yulong porphyry copper belt in eastern Tibet is located in the middle of Tethys–Himalayan metallogenic mega-province, which is one of the three major porphyry copper metallogenic mega-provinces. The Yulong copper belt belongs to the super porphyry copper belt and represents one of the most important copper mineralization prospecting areas in China. A significant quantity of research data shows that this study area belongs to the environment of intracontinental collision and compression, with a complex geological structure, magmatic rock development and excellent metallogenic geological background. However, because this area is located in an alpine and high-altitude area, it is difficult to carry out any traditional field geological surveys, and the existing studies of both prospecting and prediction are relatively weak. This study focused on information extraction for alteration minerals in the Yulong metallogenic belt and its surroundings based on multispectral data and hyperspectral data, establishing a spectral library of alteration minerals in this area. Based on Sentinel-1A radar data and Landsat-8 OLI color synthesis data, the linear structure of the study area was interpreted. On this basis, the information extraction results relating to alteration minerals obtained from multi-source remote sensing data, linear structure interpretation results and the geochemical exploration data of the study area were superimposed to comprehensively analyze the metallogenic geological conditions and mineralization characteristics in the area, establish remote sensing prospecting indicators there and optimize the potential areas for prospecting, providing technical support for the next step of prospecting and exploration in the area. [ABSTRACT FROM AUTHOR]

In this paper, we propose an innovative approach for transforming 2D human pose estimation into 3D models using Single Input–Single Output (SISO) Ultra-Wideband (UWB) radar technology. This method addresses the significant challenge of reconstructing 3D human poses from 1D radar signals, a task traditionally hindered by low spatial resolution and complex inverse problems. The difficulty is further exacerbated by the ambiguity in 3D pose reconstruction, as multiple 3D poses may correspond to similar 2D projections. Our solution, termed the Radar PoseLifter network, leverages the micro-Doppler signatures inherent in 1D radar echoes to effectively convert 2D pose information into 3D structures. The network is specifically designed to handle the long-range dependencies present in sequences of 2D poses. It employs a fully convolutional architecture, enhanced with a dilated temporal convolutions network, for efficient data processing. We rigorously evaluated the Radar PoseLifter network using the HPSUR dataset, which includes a diverse range of human movements. This dataset comprises data from five individuals with varying physical characteristics, performing a variety of actions. Our experimental results demonstrate the method's robustness and accuracy in estimating complex human poses, highlighting its effectiveness. This research contributes significantly to the advancement of human motion capture using radar technology. It presents a viable solution for applications where precision and reliability in motion capture are paramount. The study not only enhances the understanding of 3D pose estimation from radar data but also opens new avenues for practical applications in various fields. [ABSTRACT FROM AUTHOR]

There is increasing interest in space domain awareness worldwide, motivating investigation of the use of non-traditional sensors for space surveillance. One such class of sensor is VHF wind profiling radars, which have a low cost relative to other radars typically applied to this task. These radars are ubiquitous throughout the world and may potentially offer complementary space surveillance capabilities to the Space Surveillance Network. This paper updates an initial investigation on the use of Buckland Park VHF wind profiling radars for observing resident space objects in low Earth orbit to further investigate the space surveillance capabilities of the sensor class. The radar was operated during the Australian Defence "SpaceFest" 2019 activity, incorporating new beam scheduling and signal processing functionality that extend upon the capabilities described in the initial investigation. The beam scheduling capability used two-line element propagations to determine the appropriate beam direction to use to observe transiting satellites. The signal processing capabilities used a technique based on the Keystone transform to correct for range migration, allowing the development of new signal processing modes that allow the coherent integration time to be increased to improve the SNR of the observed targets, thereby increasing the detection rate. The results reveal that 5874 objects were detected over 10 days, with 2202 unique objects detected, representing a three-fold increase in detection rate over previous single-beam direction observations. The maximum detection height was 2975.4 km, indicating a capability to detect objects in medium Earth orbit. A minimum detectable RCS at 1000 km of −10.97 dBm2 (0.09 m2) was observed. The effects of Faraday rotation resulting from the use of linearly polarised antennae are demonstrated. The radar's utility for providing total electron content (TEC) measurements is investigated using a high-range resolution mode and high-precision ephemeris data. The short-term Fourier transform is applied to demonstrate the radar's ability to investigate satellite rotation characteristics and monitor ionospheric plasma waves and instabilities. [ABSTRACT FROM AUTHOR]

The polar regions of Mars, including the South and North Poles, are crucial for studying Martian climate and geological history, as they contain the largest reservoir of subsurface water ice. This study introduces a new approach for reflector detection, which includes radargram denoising to effectively enhance the signal of underground reflectors, peak detection to extract the positions of subsurface stratification from the radar echoes, and peak points connection to form continuous layers. The mapped enhancement denoising process involves a linear brightness adjustment and a fourth-order diffusion equation to enhance the signal of the subsurface layers for effective detection. The subsurface detection extracts the surface and subsurface peak points based on a peak detection algorithm, while using locally window-enhanced peak filtering and Kullback–Leibler (KL) divergence mapping to filter out non-stratified peak points. Finally, the layered connection process uses the proximity parameter to connect peak points in the same layer. Applied to multiple SHARAD (Shallow Radar) images at the Martian poles, this algorithm demonstrated a false detection rate below 5%. Compared to other methods, this method has a missed detection rate of less than 5% and, additionally, exhibits fewer discontinuities in layer connectivity. Therefore, this algorithm shows exceptional proficiency and applicability in analyzing the complex subsurface structures of the Martian polar regions. [ABSTRACT FROM AUTHOR]

Radar emitter signal sorting (RESS) is a crucial process in contemporary electronic battlefield situation awareness. Separating pulses belonging to the same radar emitter from interleaved radar pulse sequences with a lack of prior information, high density, strong overlap, and wide parameter distribution has attracted increasing attention. In order to improve the accuracy of RESS under scenarios with limited labeled samples, this paper proposes an RESS model called TR-RAGCN-AFF-RESS. This model transforms the RESS problem into a pulse-by-pulse classification task. Firstly, a novel weighted adjacency matrix construction method was proposed to characterize the structural relationships between pulse attribute parameters more accurately. Building upon this foundation, two networks were developed: a Transformer(TR)-based interleaved pulse sequence temporal feature extraction network and a residual attention graph convolutional network (RAGCN) for extracting the structural relationship features of attribute parameters. Finally, the attention feature fusion (AFF) algorithm was introduced to fully integrate the temporal features and attribute parameter structure relationship features, enhancing the richness of feature representation for the original pulses and achieving more accurate sorting results. Compared to existing deep learning-based RESS algorithms, this method does not require many labeled samples for training, making it better suited for scenarios with limited labeled sample availability. Experimental results and analysis confirm that even with only 10% of the training samples, this method achieves a sorting accuracy exceeding 93.91%, demonstrating high robustness against measurement errors, lost pulses, and spurious pulses in non-ideal conditions. [ABSTRACT FROM AUTHOR]

Ground-penetrating radar (GPR) is a rapid and non-destructive geophysical technique widely employed to detect and quantify subsurface structures and characteristics. Its capability for time lapse (TL) detection provides essential insights into subsurface hydrological dynamics, including lateral flow and soil water distribution. However, during TL-GPR surveys, field conditions often create discrepancies in surface geometry, which introduces mismatches across sequential TL-GPR images. These discrepancies may generate spurious signal variations that impede the accurate interpretation of TL-GPR data when assessing subsurface hydrological processes. In responding to this issue, this study introduces a TL-GPR image alignment method by employing the dynamic time warping (DTW) algorithm. The purpose of the proposed method, namely TLIAM–DTW, is to correct for geometric mismatch in TL-GPR images collected from the identical survey line in the field. We validated the efficacy of the TLIAM–DTW method using both synthetic data from gprMax V3.0 simulations and actual field data collected from a hilly, forested area post-infiltration experiment. Analyses of the aligned TL-GPR images revealed that the TLIAM–DTW method effectively eliminates the influence of geometric mismatch while preserving the integrity of signal variations due to actual subsurface hydrological processes. Quantitative assessments of the proposed methods, measured by mean absolute error (MAE) and root mean square error (RMSE), showed significant improvements. After performing the TLIAM–DTW method, the MAE and RMSE between processed TL-GPR images and background images were reduced by 96% and 78%, respectively, in simple simulation scenarios; in more complex simulations, MAE declined by 27–31% and RMSE by 17–43%. Field data yielded reductions in MAE and RMSE of >82% and 69%, respectively. With these substantial improvements, the processed TL-GPR images successfully depict the spatial and temporal transitions associated with subsurface lateral flows, thereby enhancing the accuracy of monitoring subsurface hydrological processes under field conditions. [ABSTRACT FROM AUTHOR]

Ice thickness has a significant effect on the physical and biogeochemical processes of a lake, and it is an integral focus of research in the field of ice engineering. The Qinghai–Tibetan Plateau, known as the Third Pole of the world, contains numerous lakes. Compared with some information, such as the area, water level, and ice phenology of its lakes, the ice thickness of these lakes remains poorly understood. In this study, we used an unmanned aerial vehicle (UAV) with a 400/900 MHz ice-penetrating radar to detect the ice thickness of Qinghai Lake and Gahai Lake. Two observation fields were established on the western side of Qinghai Lake and Gahai Lake in January 2019 and January 2021, respectively. Based on the in situ ice thickness and the propagation time of the radar, the accuracy of the ice thickness measurements of these two non-freshwater lakes was comprehensively assessed. The results indicate that pre-processed echo images from the UAV-borne ice-penetrating radar identified non-freshwater lake ice, and we were thus able to accurately calculate the propagation time of radar waves through the ice. The average dielectric constants of Qinghai Lake and Gahai Lake were 4.3 and 4.6, respectively. This means that the speed of the radar waves that propagated through the ice of the non-freshwater lake was lower than that of the radio waves that propagated through the freshwater lake. The antenna frequency of the radar also had an impact on the accuracy of ice thickness modeling. The RMSEs were 0.034 m using the 400 MHz radar and 0.010 m using the 900 MHz radar. The radar with a higher antenna frequency was shown to provide greater accuracy in ice thickness monitoring, but the control of the UAV's altitude and speed should be addressed. [ABSTRACT FROM AUTHOR]

Numerous analytical radar-scattering laws have been published through the past decades to interpret planetary radar observations, such as Hagfors' law, which has been commonly used for the Moon, and the cosine law, which is commonly used in the shape modeling of asteroids. Many of the laws have not been numerically validated in terms of their interpretation and limitations. This paper evaluates radar-scattering laws for self-affine fractal surfaces using a numerical approach. Traditionally, the autocorrelation function and, more recently, the Hurst exponent, which describes the self-affinity, have been used to quantify the height correlation. Here, hundreds of three-dimensional synthetic surfaces parameterized using a root-mean-square (rms) height and a Hurst exponent were generated, and their backscattering coefficient functions were computed to evaluate their consistency with selected analytical models. The numerical results were also compared to empirical models for roughness and radar-scattering measurements of Hawaii lava flows and found consistent. The Gaussian law performed best at predicting the rms slope regardless of the Hurst exponent. Consistent with the literature, it was found to be the most reliable radar-scattering law for the inverse modeling of the rms slopes and the Fresnel reflection coefficient from the quasi-specular backscattering peak, when homogeneous statistical properties and a ray-optics approach can be assumed. The contribution of multiple scattering in the backscattered power increases as a function of rms slope up to about 20% of the backscattered power at normal incidence when the rms slope angle is 46°. [ABSTRACT FROM AUTHOR]

Detecting multiple human targets in indoor scenarios using ultra-wideband (UWB) radar usually involves false detection results caused by the secondary reflections, which might reduce the target detection accuracy and cause a more severe deterioration when the number of targets increases. This article proposed a two-step accuracy improvement method for multitarget detection in environments with multiple human targets of more than three and strong secondary reflections by the surroundings, especially the walls. Based on the rough detection results acquired by the modified CA-CFAR (MCA-CFAR) processing, the first step achieves the primary false alarm suppression using a short-window accumulation in the time domain. Then, the second step applies the decision confidence on the detection results from the first step to assess the reliability of results for improved accuracy. The two-step accuracy improvement could thus have a higher accuracy through cascading false alarm suppression. The effectiveness and accuracy of the proposed algorithm are verified based on the experimental results. [ABSTRACT FROM AUTHOR]

The Biomass Proxy is a new cloud-free vegetation monitoring product that offers timely and analysis-ready data indicative of above-ground crop biomass dynamics at 10m spatial resolution. The Biomass Proxy links the consistent and continuous temporal signal of the Sentinel-1 Cross Ratio (CR), a vegetation index derived from Synthetic Aperture Radar backscatter, with the spatial information of the Sentinel-2 Normalized Difference Vegetation Index (NDVI), a vegetation index derived from optical observations. A global scaling relationship between CR and NDVI forms the basis of a novel fusion methodology based on static and dynamic combinations of temporal and spatial responses of CR and NDVI at field level. The fusion process is used to mitigate the impact on product quality of low satellite revisit periods due to acquisition design or persistent cloud coverage, and to respond to rapid changes in a timely manner to detect environmental and management events. The resulting Biomass Proxy provides time series that are continuous, unhindered by clouds, and produced uniformly across all geographical regions and crops. The Biomass Proxy offers opportunities including improved crop growth monitoring, event detection, and phenology stage detection. [ABSTRACT FROM AUTHOR]

The planet Mars is the most probable among the terrestrial planets in our solar system to support human settlement or colonization in the future. The detection of water ice or liquid water on the shallow subsurface of Mars is a crucial scientific objective for both the Chinese Tianwen-1 and United States Mars 2020 missions, which were launched in 2020. Both missions were equipped with Rover-mounted ground-penetrating radar (GPR) instruments, specifically the RoPeR on the Zhurong rover and the RIMFAX radar on the Perseverance rover. The in situ radar provides unprecedented opportunities to study the distribution of shallow subsurface water ice on Mars with its unique penetrating capability. The presence of water ice on the shallow surface layers of Mars is one of the most significant indicators of habitability on the extraterrestrial planet. A considerable amount of evidence pointing to the existence of water ice on Mars has been gathered by previous researchers through remote sensing photography, radar, measurements by gamma ray spectroscopy and neutron spectrometers, soil analysis, etc. This paper aims to review the various approaches utilized in detecting shallow subsurface water ice on Mars to date and to sort out the past and current evidence for its presence. This paper also provides a comprehensive overview of the possible clues of shallow subsurface water ice in the landing area of the Perseverance rover, serving as a reference for the RIMFAX radar to detect water ice on Mars in the future. Finally, this paper proposes the future emphasis and direction of rover-mounted radar for water ice exploration on the Martian shallow subsurface. [ABSTRACT FROM AUTHOR]

Metamaterial-based coded aperture imaging (MCAI) is a forward-looking radar imaging technique based on wavefront modulation. The scattering coefficients of the target can resolve as an ill-posed inverse problem. Data-based deep-learning methods provide an efficient, but expensive, way for target reconstruction. To address the difficulty in collecting paired training data, an untrained deep radar-echo-prior-based MCAI (DMCAI) optimization model is proposed. DMCAI combines the MCAI model with a modified U-Net for predicting radar echo. A joint loss function based on deep-radar echo prior and total variation is utilized to optimize network weights through back-propagation. A target reconstruction strategy by alternatively using the imaginary and real part of the radar echo signal (STAIR) is proposed to solve the DMCAI. It makes the target reconstruction task turn into an estimation from an input image by the U-Net. Then, the optimized weights serve as a parametrization that bridges the input image and the target. The simulation and experimental results demonstrate the effectiveness of the proposed approach under different SNRs or compression measurements. [ABSTRACT FROM AUTHOR]

Employing different bands of radar to detect precipitation information in identical regions enables the acquisition of a more comprehensive precipitation cloud structure, thereby refining the continuity and completeness of precipitation measurements. This study first compared the coincident data from CloudSat W-band cloud profiling radar (CPR) and Global Precipitation Measurement Mission (GPM) Ka-band precipitation radar (KaPR) from 2014 to 2017, and then a synthesis of the radar reflectivity from CPR and KaPR was attempted to obtain a complete cloud and precipitation structure. The findings of the reflectivity comparisons indicated that the echo-top height identified by CPR is on average 3.6 to 4.2 km higher than that from KaPR, due to the higher sensitivity. Because of strong attenuation of CPR by liquid-phase particles, the reflectivity below the height of the melting layer usually shows an opposite gradient to KaPR with decreasing altitude. The difference in the near-surface rain rates of CPR and KaPR was found to be related to reflectivity gradients in the vertical direction, and the larger the reflectivity gradients, the greater the differences in near-surface rain rates. For better representing the complete vertical structure of precipitation clouds and improving the consistency of the reflectivity and precipitation rate, the radar reflectivity was weighted, synthesized from CPR and KaPR based on the gradient difference of the reflectivity from the two radars. We presented the synthesis results for a stratiform cloud and a deep convective case, and Spearman's rank correlation coefficient (rs) between the GPM combined radiometer precipitation rate and the radar reflectivity was utilized to analyze the performance of the synthesis. The consistency between synthesized reflectivity and precipitation rate in the non-liquid phase was improved compared with KaPR, and the rs of the ice and mixed phases was increased by about 12% and 10%, respectively. [ABSTRACT FROM AUTHOR]

The increasing amount of space debris poses a significant threat to operational satellites and space-based services. This article updates the community on the current status of the development of ATLAS, a tracking radar that is part of the EUSST network and aims to detect space objects in low Earth orbits. This article focuses on the latest activities performed: calibration of the pointing system and initial observations of space objects. The calibration procedure consisted of cross-scanning the Solar disk and yielded great results, obtaining an offset of 5.3° in azimuth and 0.10° in elevation. The first observation campaign resulted in 33 range detections of the International Space Station (ISS) with a probability of false alarm of  10 − 9 . The observations were then used to readjust the radar equation to assess the real-world performance of the system. [ABSTRACT FROM AUTHOR]

This paper presents a method for predicting atmospheric duct conditions from a clutter power spectrum using deep learning. To accurately predict the duct conditions, deep learning with a binary classification is applied to the proposed refractivity from the clutter (RFC) method. The input data set is the artificial clutter data that are generated via the Advanced Refractive Prediction System (AREPS) simulation software Ver. 3.6 in conjunction with random atmospheric refractive indices. The output of the RFC method is then predicted via binary classification, indicating whether the atmospheric conditions are duct or non-duct. For the cross-validation, the clutter power spectrum data are generated based on real atmospheric refractivity data. The results show that the DNN trained with 5600 pieces of data (validation accuracy of 95.99%) exhibits a binary classification accuracy of 98.36%. The deep neural network (DNN) trained with 28,000 pieces of data (validation accuracy of 98.20%) achieves a binary classification accuracy of 99.06% with an F1-score of 0.9921. [ABSTRACT FROM AUTHOR]

The processes of ocean dynamics are complex near the Pearl River Estuary and are not clear due to a lack of abundant observations. The spatial characteristics of the spring sea surface currents in the adjacent waters of the Pearl River Estuary were analyzed using the current data observed by a three-station high-frequency surface wave radar system (HFSWRS). Compared with the two-station HFSWRS, the deviation of current velocity and direction observed by the three-station HFSWRS from the underway measurements decreased by 42.86% and 38.30%, respectively. The analyzed results show that the M2 tidal current is the dominant current among all the tidal constituents, followed by K1, with angles of inclination ranging from 130° to 150°. The tidal flow is dominated by northwest–southeast back-and-forth flow. In the southern part of the observed area, which is far from the coastline, the tidal current ellipses exhibit a circular pattern. The prevalent tidal current type in this region is irregularly semi-diurnal, and the shallow water constituents also have a significant effect. The tidal energy in the adjacent waters of the Pearl River Estuary is affected by potential energy flux and kinetic energy flux. As the water depth and currents velocity increase in the southeast direction, the tidal energy flux increases. In the nearshore zone, the direction of tidal energy flux varies along the coastline. The changes in the residual current within the observed area are correlated with the sea surface wind field. Based on the high-precision sea surface current observed by the three-station HFSWRS, the characteristics of the ocean dynamic processes near the Pearl River Estuary are analyzed comprehensively, which provides important reference and confidence for the application of the developing new radar observing network with about 10 radar stations near the Pearl River Estuary. [ABSTRACT FROM AUTHOR]

Surface currents obtained from the high-frequency surface-wave radars (HFSWRs) installed along the coast of Fujian Province are utilized to characterize submesoscale eddies in the southwestern Taiwan Strait from 29 January to 26 March 2013. The algorithm based on vector geometry (VG) has been applied to datasets and a total of 414 (161 anticyclonic and 253 cyclonic eddies) were obtained. Eddies with both rotations had a relatively short lifespan (≤3.7 h), and their radii were in the range of 5–22.5 km. Eddies with a lifespan of over 30 minutes were more likely to occur north of the Taiwan Strait shoals and move eastward or northeastward. The deviation of moving directions of eddies with a moving distance of more than 20 km was within 18°. Moreover, eddies could hardly hold their original forms with cyclones extending in the east-west and compressing in the north-south direction, and anticyclones were the opposite. The vorticity and strain rate were proportional to the square of the energy intensity (EI). This study shows that the array HFSWRs have a strong capability to observe short-lived submesoscale eddies. [ABSTRACT FROM AUTHOR]

Clouds are an important component of weather systems and are difficult to effectively characterize using current climate models and estimation of radiative forcing. Due to the limitations in observational capabilities, it remains difficult to obtain high-spatiotemporal-resolution, continuous, and accurate observations of clouds. To overcome this issue, we propose a novel and practical combined retrieval method using millimeter-wave radar and lidar, which enables the microphysical properties of thin liquid water clouds, such as cloud droplet effective radius, number concentration, and liquid water content, to be retrieved. This method was utilized to analyze the clouds observed at the Shanghai World Expo Park and was validated through synchronous observations with a microwave radiometer. Furthermore, the most suitable extinction backscatter ratio was determined through sensitivity analysis. This study provides vertical distributions of cloud microphysical properties with a time resolution of 1 min and a spatial resolution of 30 m, demonstrating the scientific potential of this combined retrieval method. [ABSTRACT FROM AUTHOR]

In this paper, we propose a method for extracting the structure of an indoor environment using radar. When using the radar in an indoor environment, ghost targets are observed through the multipath propagation of radio waves. The presence of these ghost targets obstructs accurate mapping in the indoor environment, consequently hindering the extraction of the indoor environment. Therefore, we propose a deep learning-based method that uses image-to-image translation to extract the structure of the indoor environment by removing ghost targets from the indoor environment map. In this paper, the proposed method employs a conditional generative adversarial network (CGAN), which includes a U-Net-based generator and a patch-generative adversarial network-based discriminator. By repeating the process of determining whether the structure of the generated indoor environment is real or fake, CGAN ultimately returns a structure similar to the real environment. First, we generate a map of the indoor environment using radar, which includes ghost targets. Next, the structure of the indoor environment is extracted from the map using the proposed method. Then, we compare the proposed method, which is based on the structural similarity index and structural content, with the k-nearest neighbors algorithm, Hough transform, and density-based spatial clustering of applications with noise-based environment extraction method. When comparing the methods, our proposed method offers the advantage of extracting a more accurate environment without requiring parameter adjustments, even when the environment is changed. [ABSTRACT FROM AUTHOR]

Acquiring pulse signals of radar source is an essential component in implementing electronic support measures (ESM). The conventional signal detection or deinterleaving method are mainly applied in relatively simple environments. Currently, radar electronic reconnaissance signal processing capability is severely constrained by poor signal-to-noise ratio (SNR) and the interleaving of signals from various radar sources. This research develops a multi-layer particle swarm optimization (PSO) pulse extraction and deinterleaving technique to improve ESM's efficacy further. First, coherent accumulation of the received signals is performed using PSO to obtain higher SNR pulse. Second, the signals from this radar source are deinterleaved using the obtained pulse. Ultimately, the aforementioned procedures are combined into a multi-layer PSO architecture to capture radar source signals and deinterleaving them at low SNRs. The suggested algorithm's efficacy and robustness are confirmed through simulation experiments. [ABSTRACT FROM AUTHOR]

Traditional radar detection methods heavily rely on the signal-to-clutter ratio (SCR); a variety of feature-based detection methods have been proposed, providing a new way for radar detection and the recognition of weak targets. Existing feature-based detection methods determine the presence or absence of a target based on whether the feature value is within the judgment region, generally focusing only on the distribution of features and making insufficient use of inter-feature chronological information. This paper uses the autoregressive (AR) model to model and predict the time sequence of radar echoes in the feature domain and takes the chronological information of historical frame features as the prior information to form new features for detection on this basis. A classification method for floating small targets based on the Doppler spectrum centroid sequence is proposed. By using the AR model to fit the Doppler spectrum centroid feature sequence of the target, the model coefficients are regarded as the secondary features for target identification. The measured data show that the correct classification and identification rate of this method for ship targets and floating small targets can reach over 92% by using 50 centroid features. [ABSTRACT FROM AUTHOR]

The tropical forests in the Amazon store large amounts of carbon and are still considered a carbon sink. There is evidence that deforestation can turn a forest landscape into a carbon source due to land use and forest degradation. Deforestation causes fragmented forest landscapes. It is known from field experiments that forest dynamics at the edge of forest fragments are altered by changes in the microclimate and increased tree mortality ("edge effects"). However, it is unclear how this will affect large fragmented forest landscapes, and thus the entire Amazon region. The aim of this study is to investigate different forest attributes in edge and core forest areas at high resolution, and thus to identify the large-scale impacts of small-scale edge effects. Therefore, a well-established framework combining forest modelling and lidar-generated forest structure information was combined with radar-based forest cover data. Furthermore, forests were also analyzed at the landscape level to investigate changes between highly fragmented and less-fragmented landscapes. This study found that the aboveground biomass in forest edge areas is 27% lower than in forest core areas. In contrast, the net primary productivity is 13% higher in forest edge areas than in forest core areas. In the second step, whole fragmented landscapes were analyzed. Nearly 30% of all forest landscapes are highly fragmented, particularly in the regions of the Arc of Deforestation, on the edge of the Andes and on the Amazon river banks. Less-fragmented landscapes are mainly located in the central Amazon rainforest. The aboveground biomass is 28% lower in highly fragmented forest landscapes than in less-fragmented landscapes. The net primary productivity is 13% higher in highly fragmented forest landscapes than in less-fragmented forest landscapes. In summary, fragmentation of the Amazon rainforest has an impact on forest attributes such as biomass and productivity, with mostly negative effects on forest dynamics. If deforestation continues and the proportion of highly fragmented forest landscapes increase, the effect may be even more intense. By combining lidar, radar and forest modelling, this study shows that it is possible to map forest structure, and thus the degree of forest degradation, over a large area and derive more detailed information about the carbon dynamics of the Amazon region. [ABSTRACT FROM AUTHOR]

With the development of millimeter-wave radar systems, substrate-integrated waveguide (SIW) slot antennas have been widely used. This paper presents a computational approach for calculating the equivalent normalized admittance of slot in low sidelobe SIW longitudinal slot antennas. In contrast to the existing methods, this method takes into account the impact of the N-slots coupling on the admittance. Through this method, fitting functions for resonant length and conductance are obtained, which describe the relationship between the resonant length, resonant conductance, and offset of slots. Moreover, based on the two fitting functions, a low sidelobe SIW longitudinal slot linear antenna is designed for millimeter-wave radar applications at 77 GHz. This antenna consists of a transition from the standard WR-12 waveguide to the SIW and a set of radiating slots. The simulation results indicate an impedance bandwidth of 4.8% and a gain of 13.2 dBi. The sidelobe level in the H-plane is below −28 dB, which meets the desired specifications and confirms the accuracy of the presented method. [ABSTRACT FROM AUTHOR]

Gust fronts (GFs) belong to the boundary layer convergence system. A strong GF can cause serious wind disasters, so its automatic monitoring and identification are very helpful but difficult in daily meteorological operations. By collecting convective weather processes in Hubei, Jiangsu, and other regions of China, 1422 GFs from 106 S-band new-generation weather radar (CINRAD/SA) volume scan data are labeled as positive samples by means of human–computer interaction, and the same number of negative samples are randomly tagged from no GF radar data. A deep learning dataset including 2844 labels with a positive and negative sample ratio of 1:1 is constructed, and 80%, 10%, and 10% of the dataset are separated as training, validation, and test sets, respectively. Then, the training dataset is expanded to 273,120 samples by data augmentation technology. Since the height of a GF is generally less than 1.5 km, three deep-learning-based models are trained for GF automatic recognition according to the distance from the radars. Three models (M1, M2, M3) are trained with the data at a 0.5° elevation angle from 65 to 180 km away from the radars, at 0.5° and 1.5° angles from 40 to 65 km, and at 0.5°, 1.5°, and 2.4° angles within 40 km, respectively. The precision, confusion matrix, and its derived indicators including receiver operating characteristic curve (ROC) and the area under ROC (AUC) are used to evaluate the three models by the test set. The results show that the identification precisions of the models are 97.66% (M1), 90% (M2), and 90.43% (M3), respectively. All the hit rates are over 89%, the false positive rates are less than 11%, and the critical success indexes (CSIs) surpass 82%. In addition, all the optimal critical points on the ROC curves are close to (0, 1), and the AUC values are above 0.93. These results suggest that the three models can effectively achieve the automatic discrimination of GFs. Finally, the models are demonstrated by three GF events detected with Qingpu, Nantong, and Cangzhou radars. [ABSTRACT FROM AUTHOR]

In the application of Compressive Sensing (CS) theory for sidelobe suppression in Random Frequency and Pulse Repetition Interval Agile (RFPA) radar, the off−grid issues affect the performance of target parameter estimation in RFPA radar. Therefore, to address this issue, this paper presents an off−grid CS algorithm named Refinement and Generalized Double Pareto (GDP) distribution based on Sparse Bayesian Learning (RGDP−SBL) for RFPA radar that utilizes a coarse−to−fine grid refinement approach, allowing precise and cost−effective signal recovery while mitigating the impact of off−grid issues on target parameter estimation. To obtain a high-precision signal recovery, especially in scenarios involving closely spaced targets, the RGDP−SBL algorithm makes use of a three−level hierarchical prior model. Furthermore, the RGDP−SBL algorithm efficiently utilizes diagonal elements during the coarse search and exploits the convexity of the grid energy curve during the fine search, therefore significantly reducing computational complexity. Simulation results demonstrate that the RGDP−SBL algorithm significantly improves signal recovery performance while maintaining low computational complexity in multiple scenarios for RFPA radar. [ABSTRACT FROM AUTHOR]

The risk of oil spills in the Arctic is growing rapidly as anthropogenic activities increase due to climate-driven sea ice loss. Detecting and monitoring fuel spills in the marine environment is imperative for enacting an efficient response to mitigate the risk. Microwave radar systems can be used to address this issue; therefore, we examined the potential of C-band polarimetric radar for detecting diesel fuel in freezing seawater under windy environmental conditions. We present results from a mesocosm experiment, where we introduced diesel fuel to a seawater-filled cylindrical tub at the Sea-ice Environmental Research Facility (SERF), University of Manitoba. We characterized the temporal evolution of the diesel-contaminated seawater and sea ice by monitoring the normalized radar cross section (NRCS) and polarimetric parameters (i.e., copolarization ratio (Rco), cross-polarization ratio (Rxo), entropy (H), mean-alpha (α), conformity coefficient (μ), and copolarization correlation coefficient (ρco)) at 20° and 25° incidence angles. Three stages were identified, with notably different NRCS and polarimetric results, related to the thermophysical conditions. The transition from calm conditions to windy conditions was detected by the 25° incidence angle, whereas the transition from open water to sea ice was more apparent at 20°. The polarimetric analysis demonstrated that the conformity coefficient can have distinctive sensitivities to the presence of wind and sea ice at different incidence angles. The H versus α scatterplot showed that the range of distribution is dependent upon wind speed, incidence angle, and oil product. The findings of this study can be used to further improve the capability of existing and future C-band dual-polarization radar satellites or drone systems to detect and monitor potential diesel spills in the Arctic, particularly during the freeze-up season. [ABSTRACT FROM AUTHOR]

Precipitation nowcasting is critical for areas such as agriculture, water resource management, urban drainage systems, transport and disaster preparedness. In recent years, methods such as convolutional recurrent neural networks (ConvRNN) in deep learning techniques have been used to solve this task. Despite the effective improvement in forecasting quality, there are still problems with blurred and distorted prediction images, as well as difficulties in effectively forecasting high echo regions. To solve the above problems, this article presents a spatio-temporal long–short-term memory network model in view of multi-scale context fusion and attention mechanisms. This method fully extracts the short-term context information of different scales of radar image through the multi-scale context fusion module. The attention module broadens the time perception domain of the prediction unit so that the model perceives more historical time dynamics. Using the Hong Kong region weather radar data as a sample, the results of the experimental comparative analysis show that the spatio-temporal long and short-term memory network in view of multi-scale context fusion and attention mechanism achieves better prediction performance. Our model is effective in improving both image quality and meteorological assessment metrics with higher accuracy and more details. [ABSTRACT FROM AUTHOR]

The non-stationary clutter of space-based early warning radar (SBEWR) is more serious than that of airborne early warning radar. This phenomenon is primarily attributed to the Earth's rotation and range ambiguity. The increase in clutter degrees of freedom (DOFs) and the significant widening of the clutter suppression notch are not conducive to moving target detection near main lobe clutter. This paper proposes an effective approach to suppress non-stationary clutter based on an interpulse multi-frequency mode for SBEWR. Using the orthogonality of the uniform stepping frequency signal, partial range ambiguity can be effectively suppressed, and the clutter DOFs will be reduced. Subsequently, joint pitch-azimuth-Doppler three-dimensional spacetime adaptive processing and slant range preprocessing are used to perform clutter suppression. This combination not only curtails the estimation error associated with the clutter covariance matrix but also enhances the overall detection capabilities of the system. The simulation results verify the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

Weather radar is a useful tool for monitoring and forecasting severe weather but has limited coverage due to beam blockage from mountainous terrain or other factors. To overcome this issue, an intelligent technology called "Echo Reconstruction UNet (ER-UNet)" is proposed in this study. It reconstructs radar composite reflectivity (CREF) using observations from Fengyun-4A geostationary satellites with broad coverage. In general, ER-UNet outperforms UNet in terms of root mean square error (RMSE), mean absolute error (MAE), structural similarity index (SSIM), probability of detection (POD), false alarm rate (FAR), critical success index (CSI), and Heidke skill score (HSS). Additionally, ER-UNet provides the better reconstruction of CREF compared to the UNet model in terms of the intensity, location, and details of radar echoes (particularly, strong echoes). ER-UNet can effectively reconstruct strong echoes and provide crucial decision-making information for early warning of severe weather. [ABSTRACT FROM AUTHOR]

As a spatial–temporal sequence prediction task, radar echo extrapolation aims to predict radar echoes' future movement and intensity changes based on historical radar observations. Two urgent issues still need to be addressed in deep learning radar echo extrapolation models. First, the predicted radar echo sequences often exhibit echo-blurring phenomena. Second, over time, the output echo intensities from the model gradually weaken. In this paper, we propose a novel model called the MS-RadarFormer, a Transformer-based multi-scale deep learning model for radar echo extrapolation, to mitigate the two above issues. We introduce a multi-scale design in the encoder–decoder structure and a Spatial–Temporal Attention block to improve the precision of radar echoes and establish long-term dependencies of radar echo features. The model uses a non-autoregressive approach for echo prediction, avoiding accumulation errors during the recursive generation of future echoes. Compared to the baseline, our model shows an average improvement of 15.8% in the critical success index (CSI), an average decrease of 8.3% in the false alarm rate (FAR), and an average improvement of 16.2% in the Heidke skill score (HSS). [ABSTRACT FROM AUTHOR]

Investigating the dynamic evolution process of the ocean and ionosphere in sudden sea conditions poses a challenging problem. To address this objective, this study utilizes actual data from high-frequency surface wave radar (HFSWR) to analyze, validate, summarize, and characterize the echo properties of the ocean and ionosphere during the severe Typhoon Muifa. By employing the short-time Fourier transform (STFT) method, the HFSWR ocean and ionosphere echoes stimulated by typhoon-induced gravity waves are observed, and the joint gravity wave features of the ocean and ionosphere echoes at different time scales are extracted. Additionally, the phase-space reconstruction method is employed to characterize the dynamical evolution of the joint gravity wave features in higher-dimensional space. Furthermore, the chaotic dynamics behavior of the joint gravity wave features is analyzed using the largest Lyapunov exponents. By combining the gravity wave features with chaotic dynamics, this study introduces a method to characterize the joint gravity wave features. The extraction of joint gravity wave features in HFSWR echoes stimulated by typhoons, along with the construction of a chaotic characterization scheme for the gravity wave features, provides an innovative approach and a solid technical foundation for studying the ocean and ionosphere using HFSWR under sudden sea conditions. [ABSTRACT FROM AUTHOR]

High frequency surface wave radar (HFSWR) has been successfully developed for early warning, especially for vessel target detection. However, the system's performance is consistently constrained by external environmental noise, particularly directional noise, which presents a new problem for HFSWR. Anisotropic directional noise has complex behavior, and its noise level is generally increased by 10 to 15 dB compared to traditional noise floor level. Suppressing varying directional noise and exploring obscured targets are challenging tasks for HFSWR. In this paper, a novel algorithm based on angle-Doppler joint multi-eigenvector synthesis, which considers the angle-Doppler map of radar echoes, is adopted to analyze the characteristics of the directional noise. Given the measured data set, we first analyze the directional noise-spatial correlation. Then, an algorithm based on sliding main lobe cancellation (SL-MLC) based on a sliding single-notch space filter (SSNSF) is proposed to block target components and get training data that contains precise directional noise information. Finally, the method is examined by measured data, and the results indicate the method has better performance for directional noise than the compared method. [ABSTRACT FROM AUTHOR]

We describe a method to calibrate a Software-Defined Radar (SDRadar) system mounted on an uncrewed aerial vehicle (UAV) with an ultra-wideband (UWB) waveform operated in the near-field region. Radar calibration is a prerequisite for using the full capabilities of the radar system to retrieve geophysical parameters accurately. We introduce a framework and process to calibrate the SDRadar with the UWB waveform in the 675 MHz–3 GHz range in the near-field region. Furthermore, we present the framework for computing the near-field radar cross section (RCS) of an external passive calibration target, a trihedral corner reflector (CR), using HFSS software and with consideration for specific antennas. The calibration performance was evaluated with various distances between the calibration target and radar antennas. The necessity for the knowledge of the near-field RCS to calibrate SDRadar was demonstrated, which sets this work apart from the standard method of using a trihedral CR for backscatter radar calibration. We were able to achieve approximately 0.5 dB accuracy when calibrating the SDRadar in the anechoic chamber using a trihedral CR. In outdoor field conditions, where the ground rough surface scattering effects are present, the calibration performance was lower, approximately 1.5 dB. A solution is proposed to overcome the ground effect by elevating the CR above the ground level, which enables applying time-gating around the CR echo, excluding the reflection from the ground. [ABSTRACT FROM AUTHOR]

Cloud overlap, referring to distinct cloud layers occurring over the same location, is essential for accurately calculating the atmospheric radiation transfer in numerical models, which, in turn, enhances our ability to predict future climate change. In this study, we analyze multi-year cloud overlap properties observed from the Ka-band Zenith Radar (KAZR) at the Semi-Arid Climate and Environment Observatory of Lanzhou University's (SACOL) site. We conduct a series of statistical analyses and determine the suitable temporal-spatial resolution of 1 h with a 360 m scale for data analysis. Our findings show that the cloud overlap parameter and total cloud fraction are maximized during winter-spring and minimized in summer-autumn, and the extreme value of decorrelation length usually lags one or two seasons. Additionally, we find the cloud overlap assumption has distinct effects on the cloud fraction bias for different cloud types. The random overlap leads to the minimum bias of the cloud fraction for Low-Middle-High (LMH), Low-Middle (LM), and Middle-High (MH) clouds, while the maximum overlap is for Low (L), Middle (M), and High (H) clouds. We also incorporate observations from satellite-based active sensors, including CloudSat, Cloud-Aerosol Lidar, and Infrared Pathfinder Satellite Observations (CALIPSO), to refine our study area and specific cases by considering the total cloud fraction and sample size from different datasets. Our analysis reveals that the representativeness of random overlap strengthens and then weakens with increasing layer separations. The decorrelation length varies with the KAZR, CloudSat-CALIPSO, CloudSat, and CALIPSO datasets, measuring 1.43 km, 2.18 km, 2.58 km, and 1.11 km, respectively. For H, MH, and LMH clouds, the average cloud overlap parameter from CloudSat-CALIPSO aligns closely with KAZR. For L, M, and LM clouds, when the level separation of cloud layer pairs are less than 1 km, the representative assumption obtained from different datasets are maximum overlap. [ABSTRACT FROM AUTHOR]

This paper deals with adaptive moving target detection for a forward scatter radar in complex Gaussian noise. The echoes received by the forward scatter radar include not only the noise and the possible target signals but also the direct signals. To suppress the direct signals and detect the target signals, Rao and Wald tests are derived in two cases: the secondary data which contain no target signal are available or not available. Different from monostatic radar, it is proved that the derived Rao and Wald detectors for the forward scatter radar have the same test statistics as the generalized likelihood ratio test-based detector in the complex Gaussian noise both when the secondary data are available or not available. The numerical evaluation further demonstrates the equivalence and the effectiveness of the proposed detectors. [ABSTRACT FROM AUTHOR]

The surface currents in coastal areas are closely related to the ecological environment and human activities, and are influenced by both local and remote factors of different timescales, resulting in complex genesis and multi-timescale characteristics. In this research, 9-year-long, hourly high-frequency radar (HFR) surface current observations are utilized together with satellite remote sensing reanalysis products and mooring data, and based on the Empirical Orthogonal Function (EOF) and correlation analysis, we revealed the multi-timescale characteristics of the surface currents in Fremantle Sea (32°S), Southwestern Australia, and explored the corresponding driving factors as well as the impact of El Niño-Southern Oscillation (ENSO) on the nearshore currents. Results show that the currents on the slope are dominated by the southward Leeuwin Current (LC), and the currents within the shelf are dominated by winds, which are subject to obvious diurnal and seasonal variations. The strong bathymetry variation there, from a wide shelf in the north to a narrow shelf in this study region, also plays an important role, resulting in the frequent occurrence of nearshore eddies. In addition, the near-zonal winds south of 30°S in winter contribute to the interannual variability of the Leeuwin Current at Fremantle, especially in 2011, when the onshore shelf circulation is particularly strong because of the climatic factors, together with the wind-driven offshore circulation, which results in significant and long-lasting eddies. The southward Leeuwin Current along Southwestern Australia shows a strong response to interannual climatic variability. During La Niña years, the equatorial thermal anomalies generate the westward anomalies in winds and equatorial currents, which in turn strengthen the Leeuwin Current and trigger the cross-shelf current as well as downwelling within the shelf at Fremantle, whereas during El Niño years, the climate anomalies and the response of coastal currents are opposite. This paper provides insights into the multi-timescale nature of coastal surface currents and the relative importance of different driving mechanisms. It also demonstrates the potential of HFR to reveal the response of nearshore currents to climate anomalies when combined with other multivariate data. Meanwhile, the methodology adopted in this research is applicable to other coastal regions with long-term available HFR observations. [ABSTRACT FROM AUTHOR]

The performance of a high-frequency (HF) radar network situated within the Pearl River Estuary from 17 July to 13 August 2022 is described via a comparison with seven acoustic Doppler current profilers (ADCPs). The radar network consists of six OSMAR-S100 compact HF radars, with a transmitting frequency of 13–16 MHz and a direction-finding technique. Both the radial currents and vector velocities showed good agreement with the ADCP results (coefficient of determination r2: 0.42–0.78; RMS difference of radials: 11–21.6 c m   s − 1 ; bearing offset Δ θ : − 4.8 ° – 16.1 ° ; complex correlation coefficient γ : 0.62–0.96; and phase angle α : −24.3 ° – 17.8 ° ). For these radars, the Δ θ values are not constant but vary with azimuthal angles. The relative positions between the HF radar and ADCPs, as well as factors such as the presence of island terrain obstructing the signal, significantly influence the errors. The results of spectral analysis also demonstrate a high level of consistency and the capability of HF radar to capture diurnal and semidiurnal tidal frequencies. The tidal characteristics and the Empirical Orthogonal Function (EOF) results measured by the HF radars also resemble the ADCPs and align with the characteristics of the estuarine current field. [ABSTRACT FROM AUTHOR]

Millimeter-wave radar and optical cameras are one of the primary sensing combinations for autonomous platforms such as self-driving vehicles and disaster monitoring robots. The millimeter-wave radar odometry can perform self-pose estimation and environmental mapping. However, cumulative errors can arise during extended measurement periods. In particular scenes where loop closure conditions are absent and visual geometric features are discontinuous, existing loop detection methods based on back-end optimization face challenges. To address this issue, this study introduces a correlative scan matching (CSM) pose estimation method that integrates visual and radar line features (VRL-SLAM). By making use of the pose output and the occupied grid map generated by the front end of the millimeter-wave radar's simultaneous localization and mapping (SLAM), it compensates for accumulated errors by matching discontinuous visual line features and radar line features. Firstly, a pose estimation framework that integrates visual and radar line features was proposed to reduce the accumulated errors generated by the odometer. Secondly, an adaptive Hough transform line detection method (A-Hough) based on the projection of the prior radar grid map was introduced, eliminating interference from non-matching lines, enhancing the accuracy of line feature matching, and establishing a collection of visual line features. Furthermore, a Gaussian mixture model clustering method based on radar cross-section (RCS) was proposed, reducing the impact of radar clutter points online feature matching. Lastly, actual data from two scenes were collected to compare the algorithm proposed in this study with the CSM algorithm and RI-SLAM.. The results demonstrated a reduction in long-term accumulated errors, verifying the effectiveness of the method. [ABSTRACT FROM AUTHOR]

Radar emitter signal intra-pulse modulation recognition is important for modern electronic reconnaissance systems to analyze target radar systems. In the actual environment, the intra-pulse modulations of the sampled radar emitter signals contain not only the known types in the library but also the unknown types. Therefore, the existing recognition methods, which are based on a closed set, cannot recognize the unknown samples. In order to solve this problem, in this paper, we proposed a method for radar emitter signal intra-pulse modulation open set recognition. The proposed method could classify the known modulations and identify the unknown modulation by using an original deep neural network-based recognition model trained on a closed set, estimating the signal-to-noise ratio, and calculating the reconstruction loss by an encoder–decoder model. For a given sample, the original deep neural network-based recognition model will label it as a certain known class temporarily. By estimating the SNR of the sample and calculating the reconstruction loss by inputting the sample to the corresponding encoder–decoder model related to the temporary predicted known class, whether the sample belongs to the predicted temporary known class or the unknown class will be confirmed. Experiments were conducted with five different openness conditions. The experimental results indicate that the proposed method has good performance on radar emitter signal intra-pulse modulation open set recognition. [ABSTRACT FROM AUTHOR]

A high-frequency surface wave radar (HFSWR) is the only sensor that provides inexpensive surveillance for up to 200 nautical miles (NM) of the exclusive economic zone in the 3–5 MHz band. However, because of its long wavelength, its angular resolution is low. Multiple-input multiple-output (MIMO) technology is an attractive method to improve angular resolution. This paper proposes MIMO waveforms and their processing that can be used in HFSWR systems. This dual modulation method applies linear frequency modulation to each pulse and orthogonal polyphase codes for a few consecutive pulses to enable MIMO processing. The proposed method can effectively remove the correlation of mutual interference and exhibits excellent performance in removing multiple-time-around echoes. [ABSTRACT FROM AUTHOR]

The conventional back projection (BP) algorithm is an accurate time-domain algorithm widely used for multiple-input multiple-output (MIMO) radar imaging, owing to its independence of antenna array configuration. The time-delay curve correction back projection (TCC-BP) algorithm greatly reduces the computational complexity of BP but suffers from spatial-variant correction, sidelobe interference and background noise due to the use of coherent superposition of echo time-delay curves. In this article, a residual attention U-Net-based (RAU-Net) MIMO radar imaging method that adapts complex noisy scenarios with spatial variation and sidelobe interference is proposed. On the basis of the U-Net underlying structure, we develop the RAU-Net with two modules: a residual unit with identity mapping and a dual attention module to obtain resolution spatial-variant correction and denoising on real-world MIMO radar images. The network realizes MIMO radar imaging based on the TCC-BP algorithm and substantially reduces the total computational time of the BP algorithm on the basis of improving the imaging resolution and denoising capability. Extensive experiments on the simulated and measured data demonstrate that the proposed method outperforms both the traditional methods and learning-imaging methods in terms of spatial-variant correction, denoising and computational complexity. [ABSTRACT FROM AUTHOR]

Weather radars play a crucial role in the monitoring of severe convective weather. However, due to their limited detection range, they cannot conduct an effective monitoring in remote offshore areas. Therefore, this paper utilized UNet++ to establish a model for retrieving radar composite reflectivity based on Himawari-9 satellite datasets. In the process of comparative analysis, we found that both satellite and radar data exhibited significant diurnal cycles, but there were notable differences in their variation characteristics. To address this, we established four comparative models to test the influence of latitude and diurnal cycles on the inversion results. The results showed that adding the distribution map of the minimum brightness temperature at the corresponding time in the model could effectively improve the model's performance in both spatial and temporal dimensions, reduce the root-mean-square error (RMSE) of the model, and enhance the accuracy of severe convective weather monitoring. [ABSTRACT FROM AUTHOR]

In this work, we present the preliminary results of radar observations of Near-Earth Objects (NEOs) carried out by European radio telescopes in the framework of the European Space Agency (ESA) project "NEO observation concepts for radar systems", aimed at deriving the functional requirements of a planetary radar system, evaluating the available European assets to perform NEO radar observations, and carrying out test radar campaigns. In the first part of the project, we executed the performance analysis of a possible European planetary radar system. Instrumental features, as much as issues like the impact of weather conditions on signal propagation at different radio frequencies, were considered. This paper focused on the test campaigns, performed in the years 2021–2022 in collaboration with the Jet Propulsion Laboratory (JPL), which led to the observation of several asteroids including 2021 AF8, (4660) Nereus, and 2005 LW3, which allowed us to derive astrometric measurements, as well as to measure physical properties, such as rotation periods, and observe how one of the targets is actually a binary asteroid. The obtained results demonstrated that European radio astronomical dishes, although employed only as receivers (in bistatic or multistatic configurations) and for a limited amount of time, are able to provide a significant contribution to the constitution of a European network to increase the opportunities for NEO monitoring and studies, if a transmitting antenna—equipped with a suitable high-power transmitter—were made available. [ABSTRACT FROM AUTHOR]

The problem of accurate source localization has been an area of focus in high-frequency surface wave radar (HFSWR) applications. However, antenna pattern distortion (APD) decreases the direction-of-arrival (DOA) estimation performance of the multiple signal classification (MUSIC) algorithm. Up to now, limited studies have been conducted on the calibration of antenna pattern distortion for phased arrays in HFSWR. In this paper, we first analyze the effect of APD on the performance of the MUSIC algorithm through estimation of accuracy and angular resolution. We demonstrate that using the actual pattern (or say APD) can improve DOA estimation performance. Based on this proposition, we propose a novel iterative calibration method that employs the first-order sea clutter data and can jointly estimate DOA and APD in an iterative way. To obtain available calibration points, we introduce the extraction methods of the first-order sea clutter spectrum and single-DOA spectrum points. Meanwhile, in each iteration, the Beamspace MUSIC algorithm and artificial hummingbird algorithm (AHA) are utilized to estimate the DOA and APD, respectively. Numerical results reveal a good coincidence between the actual pattern and the estimated APD. We also apply this method to process the experimental data of HFSWR. We obtain the APD vector of the real phased array and improve the direction-finding performance of several real ship targets using this vector. Both numerical and experimental results prove the correctness of our proposed calibration method. [ABSTRACT FROM AUTHOR]