Search

This paper presents a new approach for detecting deforestation using Sentinel-1 C-band backscattering data. It is based on the temporal analysis of the backscatter intensity and its correlation with the scattering behavior of deforested plots. The backscatter intensity temporal variability is modeled with a logistic function, whose lower and upper boundaries are, respectively, set based on the representative backscatter values for forest and deforested plots. The approach also enables the identification of the date of each deforestation event, corresponding to the inflection point of the logistic curve that best fits the backscatter intensity time series. The methodology was applied to two forest biomes, a tropical forest at Iguazu National Park in Argentina and a temperate forest in the Brăila region in Romania. The optimal flattening parameter was 0.12 for both sites, with an F1-score of 0.93 and 0.71 for the tropical and temperate forests, respectively. The temporal accuracy shows a bias on the estimated date, with a slight delay of 2 months. The results reveal that the Sentinel C-band data can be successfully used for deforestation detection over tropical forests; however, the accuracy for temperate forests might be 20 pp lower, depending on the environmental conditions, such as rainfall, snow and management after logging. [ABSTRACT FROM AUTHOR]

This paper presents a new approach for detecting deforestation using Sentinel-1 C-band backscattering data. It is based on the temporal analysis of the backscatter intensity and its correlation with the scattering behavior of deforested plots. The backscatter intensity temporal variability is modeled with a logistic function, whose lower and upper boundaries are, respectively, set based on the representative backscatter values for forest and deforested plots. The approach also enables the identification of the date of each deforestation event, corresponding to the inflection point of the logistic curve that best fits the backscatter intensity time series. The methodology was applied to two forest biomes, a tropical forest at Iguazu National Park in Argentina and a temperate forest in the Brăila region in Romania. The optimal flattening parameter was 0.12 for both sites, with an F1-score of 0.93 and 0.71 for the tropical and temperate forests, respectively. The temporal accuracy shows a bias on the estimated date, with a slight delay of 2 months. The results reveal that the Sentinel C-band data can be successfully used for deforestation detection over tropical forests; however, the accuracy for temperate forests might be 20 pp lower, depending on the environmental conditions, such as rainfall, snow and management after logging.

Traditional manual horizon picking is time-consuming and laborious, while automatic picking methods often suffer from the limited scope of their applications and the discontinuity of picked results. In this paper, we propose a novel method for automatic horizon picking from sub-bottom profiles (SBP) by an improved filtering algorithm. First, a clear and fine SBP image is formed using an intensity transformation method. On this basis, a novel filtering method is proposed by improving the multi-scale enhancement filtering algorithm to obtain clear horizons from an SBP image. The improvement is performed by applying a vertical suppression weighting term based on the form of logistic function, which is constructed by using the eigenvectors from the Hessian matrix. Then, the filtered image is segmented using a threshold method, and the horizon points in the SBP image are picked. After that, a horizon linking method is applied, which uses the horizon directions to refine the picked horizon points. The proposed method has been verified experimentally, and accurate and continuous horizons were obtained. Finally, the proposed method is discussed and some conclusions are drawn.

Accurately modeling the land surface phenology based on satellite data is very important to the study of vegetation ecological dynamics and the related ecosystem process. In this study, we developed a Sigmoid curve (S-curve) function by integrating an asymmetric Gaussian function and a logistic function to fit the leaf area index (LAI) curve. We applied the resulting asymptotic lines and the curvature extrema to derive the vegetation phenophases of germination, green-up, maturity, senescence, defoliation and dormancy. The new proposed S-curve function has been tested in a specific area (Shangdong Province, China), characterized by a specific pattern in leaf area index (LAI) time course due to the dominant presence of crops. The function has not yet received any global testing. The identified phenophases were validated against measurement stations in Shandong Province. (i) From the site-scale comparison, we find that the detected phenophases using the S-curve (SC) algorithm are more consistent with the observations than using the logistic (LC) algorithm and the asymmetric Gaussian (AG) algorithm, especially for the germination and dormancy. The phenological recognition rates (PRRs) of the SC algorithm are obviously higher than those of two other algorithms. The S-curve function fits the LAI curve much better than the logistic function and asymmetric Gaussian function; (ii) The retrieval results of the SC algorithm are reliable and in close proximity to the green-up observed data whether using the AVHRR LAI or the improved MODIS LAI. Three inversion algorithms shows the retrieval results based on AVHRR LAI are all later than based on improved MODIS LAI. The bias statistics reveal that the retrieval results based on the AVHRR LAI datasets are more reasonable than based on the improved MODIS LAI datasets. Overall, the S-curve algorithm has the advantage of deriving vegetation phenophases across time and space as compared to the LC algorithm and the AG algorithm. With the SC algorithm, the vegetation phenophases can be extracted more effectively.

A simple approach was developed to predict corn yields using the MoDerate Resolution Imaging Spectroradiometer (MODIS) data product from two geographically separate major corn crop production regions: Illinois, USA and Heilongjiang, China. The MOD09A1 data, which are eight-day interval surface reflectance data, were obtained from day of the year (DOY) 89 to 337 to calculate the leaf area index (LAI). The sum of the LAI from early in the season to a given date in the season (end of DOY (EOD)) was well fitted to a logistic function and represented seasonal changes in leaf area duration (LAD). A simple phenology model was derived to estimate the dates of emergence and maturity using the LAD-logistic function parameters b1 and b2, which represented the rate of increase in LAI and the date of maximum LAI, respectively. The phenology model predicted emergence and maturity dates fairly well, with root mean square error (RMSE) values of 6.3 and 4.9 days for the validation dataset, respectively. Two simple linear regression models (YP and YF) were established using LAD as the variable to predict corn yield. The yield model YP used LAD from predicted emergence to maturity, and the yield model YF used LAD for a predetermined period from DOY 89 to a particular EOD. When state/province corn yields for the validation dataset were predicted at DOY 321, near completion of the corn harvest, the YP model, including the predicted phenology, performed much better than the YF model, with RMSE values of 0.68 t/ha and 0.66 t/ha for Illinois and Heilongjiang, respectively. The YP model showed similar or better performance, even for the much earlier pre-harvest yield prediction at DOY 257. In addition, the model performance showed no difference between the two study regions with very different climates and cultivation methods, including cultivar and irrigation management. These results suggested that the approach described in this paper has potential for application to relatively wide agroclimatic regions with different cultivation methods and for extension to the other crops. However, it needs to be examined further in tropical and sub-tropical regions, which are very different from the two study regions with respect to agroclimatic constraints and agrotechnologies. [ABSTRACT FROM AUTHOR]

A simple approach was developed to predict corn yields using the MoDerate Resolution Imaging Spectroradiometer (MODIS) data product from two geographically separate major corn crop production regions: Illinois, USA and Heilongjiang, China. The MOD09A1 data, which are eight-day interval surface reflectance data, were obtained from day of the year (DOY) 89 to 337 to calculate the leaf area index (LAI). The sum of the LAI from early in the season to a given date in the season (end of DOY (EOD)) was well fitted to a logistic function and represented seasonal changes in leaf area duration (LAD). A simple phenology model was derived to estimate the dates of emergence and maturity using the LAD-logistic function parameters b1 and b2, which represented the rate of increase in LAI and the date of maximum LAI, respectively. The phenology model predicted emergence and maturity dates fairly well, with root mean square error (RMSE) values of 6.3 and 4.9 days for the validation dataset, respectively. Two simple linear regression models (YP and YF) were established using LAD as the variable to predict corn yield. The yield model YP used LAD from predicted emergence to maturity, and the yield model YF used LAD for a predetermined period from DOY 89 to a particular EOD. When state/province corn yields for the validation dataset were predicted at DOY 321, near completion of the corn harvest, the YP model, including the predicted phenology, performed much better than the YF model, with RMSE values of 0.68 t/ha and 0.66 t/ha for Illinois and Heilongjiang, respectively. The YP model showed similar or better performance, even for the much earlier pre-harvest yield prediction at DOY 257. In addition, the model performance showed no difference between the two study regions with very different climates and cultivation methods, including cultivar and irrigation management. These results suggested that the approach described in this paper has potential for application to relatively wide agroclimatic regions with different cultivation methods and for extension to the other crops. However, it needs to be examined further in tropical and sub-tropical regions, which are very different from the two study regions with respect to agroclimatic constraints and agrotechnologies.

Traditional manual horizon picking is time-consuming and laborious, while automatic picking methods often suffer from the limited scope of their applications and the discontinuity of picked results. In this paper, we propose a novel method for automatic horizon picking from sub-bottom profiles (SBP) by an improved filtering algorithm. First, a clear and fine SBP image is formed using an intensity transformation method. On this basis, a novel filtering method is proposed by improving the multi-scale enhancement filtering algorithm to obtain clear horizons from an SBP image. The improvement is performed by applying a vertical suppression weighting term based on the form of logistic function, which is constructed by using the eigenvectors from the Hessian matrix. Then, the filtered image is segmented using a threshold method, and the horizon points in the SBP image are picked. After that, a horizon linking method is applied, which uses the horizon directions to refine the picked horizon points. The proposed method has been verified experimentally, and accurate and continuous horizons were obtained. Finally, the proposed method is discussed and some conclusions are drawn. [ABSTRACT FROM AUTHOR]