Search

We present a review of in situ observations regarding the interactions between tropical cyclones and the ocean in the western North Pacific for the year 2023. A total of at least 13 tropical cyclones occurred during this period. According to the Japan Meteorological Agency, Typhoon Mawar recorded the yearly minimum pressure at 900 hPar. On average, each tropical cyclone captured 7.4 surface drifters and 25.2 Argo floats when the search radius is 300 km. During Guchol, the maximum in situ Lagrangian current reached 1.23 m/s, with sustained wind speeds of the tropical cyclone up to 31.7 m/s and a relative position of 174 km. Additionally, several Argo floats were active during tropical cyclones, with maximum sea surface temperature cooling reaching 0.66 °C. This annual review provides a comprehensive summary of the current state of in situ observations regarding tropical cyclone–ocean interaction. These findings serve as valuable references for both scientific research and operational forecasting.

Satellite and reanalysis precipitation estimates of high quality are widely used for hydrological modeling, especially in ungauged or data-scarce regions. To improve flood simulations by merging different precipitation inputs or directly merging streamflow outputs, this study comprehensively evaluates the accuracy and hydrological utility of nine corrected and uncorrected precipitation products (TMPA-3B42V7, TMPA-3B42RT, IMERG-cal, IMERG-uncal, ERA5, ERA-Interim, GSMaP, GSMaP-RNL, and PERSIANN-CCS) from 2006 to 2018 on a daily timescale using the Coupled Routing and Excess Storage (CREST) hydrological model in two flood-prone tributaries, the Beijiang and Dongjiang Rivers, of the Pearl River Basin, China. The results indicate that (1) all the corrected precipitation products had better performance (higher CC, CSI, KGE’, and NSCE values) than the uncorrected ones, particularly in the Beijiang River, which has a larger drainage area; (2) after re-calibration under Scenario II, the two daily merged precipitation products (NSCE values: 0.73–0.87 and 0.69–0.82 over the Beijiang and Dongjiang Rivers, respectively) outperformed their original members for hydrological modeling in terms of BIAS and RMSE values; (3) in Scenario III, four evaluation metrics illustrated that merging multi-source streamflow simulations achieved better performance in streamflow simulation than merging multi-source precipitation products; and (4) under increasing flood levels, almost all the performances of streamflow simulations were reduced, and the two merging schemes had a similar performance. These findings will provide valuable information for improving flood simulations and will also be useful for further hydrometeorological applications of remote sensing data.

Leaf carotenoids (Cxc) play a crucial role in vegetation as essential pigments responsible for capturing sunlight and protecting leaf tissues. They provide vital insights into a plant physiological status and serve as sensitive indicators of plant stress. However, remote sensing of Cxc at the leaf level has been challenging due to the low Cxc content and weaker absorption features compared to those of chlorophylls in the visible domain. Existing vegetation indices have been widely applied but often lack a solid physical foundation, which limits their applicability and robustness in characterizing Cxc. Yet, physical models can confront this ill-posed problem, though with high operational costs. To address this issue, this study presents a novel hybrid inversion method that combines the multilayer perceptron (MLP) algorithm with PROSPECT model simulations to accurately retrieve Cxc. The effectiveness of the MLP method was investigated through comparisons with the classical PROSPECT model inversion (look-up table [LUT] method), the convolutional neural network (CNN) hybrid model, and the Transformer hybrid model. In the pooled results of six experimental datasets, the MLP method exhibited its robustness and generalization capabilities for leaf Cxc content estimation, with RMSE of 3.12 μg/cm2 and R2 of 0.52. The Transformer (RMSE = 3.14 μg/cm2, R2 = 0.46), CNN (RMSE = 3.42 μg/cm2, R2 = 0.28), and LUT (RMSE = 3.82 μg/cm2, R2 = 0.24) methods followed in descending order of accuracy. A comparison with previous studies using the same public datasets (ANGERS and LOPEX) also demonstrated the performance of the MLP method from another perspective. These findings underscore the potential of the proposed MLP hybrid method as a powerful tool for accurate Cxc retrieval applications, providing valuable insights into vegetation health and stress response.

Maize is one of the main food crops and is widely planted in China; however, it is difficult to get timely and precise information on yields. Because of the benefits of remote sensing technology, satellite-based models (e.g., eddy covariance light use efficiency, EC-LUE) have a lot of potential for monitoring crop productivity. In this study, the gross primary productivity (GPP) of maize in the NCP was estimated using the EC-LUE model, and the GPP was subsequently transformed into yield using the harvest index. Specifically accounting for the spatiotemporal variation in the harvest index, the statistical yield and estimated GPP from the previous year were used to generate region-specific harvest indexes at the county scale. The model’s performance was assessed using statistical yield data. The results demonstrate that the increase in the total GPP in the summer maize-growing season in the NCP is directly related to the increase in the planting area, and the harvest index has significant heterogeneity in space, and the fluctuation in time is small, and the estimated yield can simulate 64% and 55%, respectively, of the variability in the yield at the county and city scales. The model also accurately captures the inter-annual changes in yield (the average absolute percentage errors are less than 20% for almost all years), but model performance varies by region. It performs better in continuous areas of maize-growing. The results from this study demonstrate that the EC-LUE model can be applied to estimate the yield from a variety of crops (other than winter wheat) and that it can be used in conjunction with a region-specific harvest index to track the production of large-scale crops.

Faxon fir (Abies fargesii var. faxoniana), as a dominant tree species in the subalpine coniferous forest of Southwest China, has strict requirements regarding the temperature and humidity of the growing environment. Therefore, the dynamic and continuous monitoring of Faxon fir distribution is very important to protect this highly sensitive ecological environment. Here, we combined unmanned aerial vehicle (UAV) imagery and convolutional neural networks (CNNs) to identify Faxon fir and explored the identification capabilities of multispectral (five bands) and red-green-blue (RGB) imagery under different months. For a case study area in Wanglang Nature Reserve, Southwest China, we acquired monthly RGB and multispectral images on six occasions over the growing season. We found that the accuracy of RGB imagery varied considerably (the highest intersection over union (IoU), 83.72%, was in April and the lowest, 76.81%, was in June), while the accuracy of multispectral imagery was consistently high (IoU > 81%). In April and October, the accuracy of the RGB imagery was slightly higher than that of multispectral imagery, but for the other months, multispectral imagery was more accurate (IoU was nearly 6% higher than those of the RGB imagery for June). Adding vegetation indices (VIs) improved the accuracy of the RGB models during summer, but there was still a gap to the multispectral model. Hence, our results indicate that the optimized time of the year for identifying Faxon fir using UAV imagery is during the peak of the growing season when using a multispectral imagery. During the non-growing season, RGB imagery was no worse or even slightly better than multispectral imagery for Faxon fir identification. Our study can provide guidance for optimizing observation plans regarding data collection time and UAV loads and could further help enhance the utility of UAVs in forestry and ecological research.

Deep-learning methods rely on massive labeled data, which has become one of the main impediments in hyperspectral image change detection (HSI-CD). To resolve this problem, pseudo-labels generated by traditional methods are widely used to drive model learning. In this paper, we propose a mutual teaching approach with momentum correction for unsupervised HSI-CD to cope with noise in pseudo-labels, which is harmful for model training. First, we adopt two structurally identical models simultaneously, allowing them to select high-confidence samples for each other to suppress self-confidence bias, and continuously update pseudo-labels during iterations to fine-tune the models. Furthermore, a new group confidence-based sample filtering method is designed to obtain reliable training samples for HSI. This method considers both the quality and diversity of the selected samples by determining the confidence of each group instead of single instances. Finally, to better extract the spatial–temporal spectral features of bitemporal HSIs, a 3D convolutional neural network (3DCNN) is designed as an HSI-CD classifier and the basic network of our framework. Due to mutual teaching and dynamic label learning, pseudo-labels can be continuously updated and refined in iterations, and thus, the proposed method can achieve a better performance compared with those with fixed pseudo-labels. Experimental results on several HSI datasets demonstrate the effectiveness of our method.

Leaf mass per area (LMA) is a key plant functional trait closely related to leaf biomass. Estimating LMA in fresh leaves remains challenging due to its masked absorption by leaf water in the short-wave infrared region of reflectance. Vegetation indices (VIs) are popular variables used to estimate LMA. However, their physical foundations are not clear and the generalization ability is limited by the training data. In this study, we proposed a hybrid approach by establishing a three-dimensional (3D) VI matrix for LMA estimation. The relationship between LMA and VIs was constructed using PROSPECT-D model simulations. The three-VI space constituting a 3D matrix was divided into cubical cells and LMA values were assigned to each cell. Then, the 3D matrix retrieves LMA through the three VIs calculated from observations. Two 3D matrices with different VIs were established and validated using a second synthetic dataset, and two comprehensive experimental datasets containing more than 1400 samples of 49 plant species. We found that both 3D matrices allowed good assessments of LMA (R2 = 0.76 and 0.78, RMSE = 0.0016 g/cm2 and 0.0017 g/cm2, respectively for the pooled datasets), and their results were superior to the corresponding single Vis, 2D matrices, and two machine learning methods established with the same VI combinations.

Maize is a widely grown crop in China, and the relationships between agroclimatic parameters and maize yield are complicated, hence, accurate and timely yield prediction is challenging. Here, climate, satellite data, and meteorological indices were integrated to predict maize yield at the city-level in China from 2000 to 2015 using four machine learning approaches, e.g., cubist, random forest (RF), extreme gradient boosting (Xgboost), and support vector machine (SVM). The climate variables included the diffuse flux of photosynthetic active radiation (PDf), the diffuse flux of shortwave radiation (SDf), the direct flux of shortwave radiation (SDr), minimum temperature (Tmn), potential evapotranspiration (Pet), vapor pressure deficit (Vpd), vapor pressure (Vap), and wet day frequency (Wet). Satellite data, including the enhanced vegetation index (EVI), normalized difference vegetation index (NDVI), and adjusted vegetation index (SAVI) from the Moderate Resolution Imaging Spectroradiometer (MODIS), were used. Meteorological indices, including growing degree day (GDD), extreme degree day (EDD), and the Standardized Precipitation Evapotranspiration Index (SPEI), were used. The results showed that integrating all climate, satellite data, and meteorological indices could achieve the highest accuracy. The highest estimated correlation coefficient (R) values for the cubist, RF, SVM, and Xgboost methods were 0.828, 0.806, 0.742, and 0.758, respectively. The climate, satellite data, or meteorological indices inputs from all growth stages were essential for maize yield prediction, especially in late growth stages. R improved by about 0.126, 0.117, and 0.143 by adding climate data from the early, peak, and late-period to satellite data and meteorological indices from all stages via the four machine learning algorithms, respectively. R increased by 0.016, 0.016, and 0.017 when adding satellite data from the early, peak, and late stages to climate data and meteorological indices from all stages, respectively. R increased by 0.003, 0.032, and 0.042 when adding meteorological indices from the early, peak, and late stages to climate and satellite data from all stages, respectively. The analysis found that the spatial divergences were large and the R value in Northwest region reached 0.942, 0.904, 0.934, and 0.850 for the Cubist, RF, SVM, and Xgboost, respectively. This study highlights the advantages of using climate, satellite data, and meteorological indices for large-scale maize yield estimation with machine learning algorithms.

The current full-waveform data at a single wavelength can mainly retrieve the geometric attributes of targets along the light path by detecting waveform components, resulting in the lack of spectral or color attribute information. This kind of device relies on a digital camera for acquiring the color information, however, which is inevitably limited by the lighting conditions and geometric registration errors. With the development of multispectral light detection and ranging (LiDAR) or even hyperspectral LiDAR that often utilize a supercontinuum laser source covering the whole visible light band, including red, green and blue bands, the simultaneous acquisition of color and spatial information becomes possible and makes passive imaging data no longer necessary. In this study, we propose a color restoration method for a full-waveform multispectral LiDAR (FWMSL) system. Additionally, we develop a multispectral lognormal function to fit the tailing echoes measured by FWMSL further accurately. Experimental data from our FWMSL system are used to evaluate the performance of the proposed method. The relative standard deviation, correlation coefficient (R2) and color difference ( Δ E ) metrics suggest that the color restoration for the full-waveform multispectral data is feasible.

Spectra of reflectance (Sr) and fluorescence (Sf) are significant for crop monitoring and ecological environment research, and can be used to indicate the leaf nitrogen content (LNC) of crops indirectly. The aim of this work is to use the Sr-Sf features obtained with hyperspectral and laser-induced fluorescence LiDAR (HSL, LIFL) systems to construct novel combined spectral indices (NCIH-F) for multi-year rice LNC estimation. The NCIH-F is in a form of FWs* Φ + GSIs* Φ , where Φ is the Sr-Sf features, and FWs and GSIs are the feature weights and global sensitive indices for each characteristic band. In this study, the characteristic bands were chosen in different ways. Firstly, the Sr-Sf characteristics which can be the intensity or derivative variables of spectra in 685 and 740 nm, have been assigned as the Φ value in NCIH-F formula. Simultaneously, the photochemical reflectance index (PRI) formed with 531 and 570 nm was modified based on a variant spectral index, called PRIfraction, with the Sf intensity in 740 nm, and then compared its potential with NCIH-F on LNC estimation. During the above analysis, both NCIH-F and PRIfraction values were utilized to model rice LNC based on the artificial neural networks (ANNs) method. Subsequently, four prior bands were selected, respectively, with high FW and GSI values as the ANNs inputs for rice LNC estimation. Results show that FW- and GSI-based NCIH-F are closely related to rice LNC, and the performance of previous spectral indices used for LNC estimation can be greatly improved by multiplying their FWs and GSIs. Thus, it can be included that the FW- and GSI-based NCIH-F constitutes an efficient and reliable constructed form combining HSL (Sr) and LIFL (Sf) data together for rice LNC estimation.

True-color three-dimensional (3D) imaging exploits spatial and spectral information and can enable accurate feature extraction and object classification. The existing methods, however, are limited by data collection mechanisms when realizing true-color 3D imaging. We overcome this problem and present a novel true-color 3D imaging method based on a 32-channel hyperspectral LiDAR (HSL) covering a 431−751 nm spectral range. We conducted two experiments, one with nine-color card papers and the other with seven different colored objects. We used the former to investigate the effect of true-color 3D imaging and determine the optimal spectral bands for compositing true-color, and the latter to explore the classification potential based on the true-color feature using polynomial support vector machine (SVM) and Gaussian naive Bayes (NB) classifiers. Since using all bands of HSL will cause color distortions, the optimal spectral band combination for better compositing the true-color were selected by principal component analysis (PCA) and spectral correlation measure (SCM); PCA emphasizes the amount of information in band combinations, while SCM focuses on correlation between bands. The results show that the true-color 3D imaging can be realized based on HSL measurements, and three spectral bands of 466, 546, and 626 nm were determined. Comparing reflectance of the three selected bands, the overall classification accuracy of seven different colored objects was improved by 14.6% and 8.25% based on SVM and NB, respectively, classifiers after converting spectral intensities into true-color information. Overall, this study demonstrated the potential of HSL system in retrieving true-color and facilitating target recognition, and can serve as a guide in developing future three-channel or multi-channel true-color LiDAR.

Leaf nitrogen concentration (LNC) is a significant indicator of crops growth status, which is related to crop yield and photosynthetic efficiency. Laser-induced fluorescence is a promising technology for LNC estimation and has been widely used in remote sensing. The accuracy of LNC monitoring relies greatly on the selection of fluorescence characteristics and the number of fluorescence characteristics. It would be useful to analyze the performance of fluorescence intensity and ratio characteristics at different wavelengths for LNC estimation. In this study, the fluorescence spectra of paddy rice excited by different excitation light wavelengths (355 nm, 460 nm, and 556 nm) were acquired. The performance of the fluorescence intensity and fluorescence ratio of each band were analyzed in detail based on back-propagation neural network (BPNN) for LNC estimation. At 355 nm and 460 nm excitation wavelengths, the fluorescence characteristics related to LNC were mainly located in the far-red region, and at 556 nm excitation wavelength, the red region being an optimal band. Additionally, the effect of the number of fluorescence characteristics on the accuracy of LNC estimation was analyzed by using principal component analysis combined with BPNN. Results demonstrate that at least two fluorescence spectral features should be selected in the red and far-red regions to estimate LNC and efficiently improve the accuracy of LNC estimation.

Nitrogen (N) is important for the growth of crops. Estimating leaf nitrogen concentration (LNC) accurately and nondestructively is important for precision agriculture, reduces environmental pollution, and helps model global carbon and N cycles. Leaf reflectance, especially in the visible and near-infrared regions, has been identified as a useful indicator of LNC. Except reflectance passively acquired by spectrometers, the newly developed multispectral LiDAR and hyperspectral LiDAR provide possibilities for measuring leaf spectra actively. The regression relationship between leaf reflectance spectra and rice (Oryza sativa) LNC relies greatly on the algorithm adopted. It would be preferable to find one algorithm that performs well with respect to passive and active leaf spectra. Thus, this study assesses the influence of six popular linear and nonlinear methods on rice LNC retrieval, namely, partial least-square regression, least squares boosting, bagging, random forest, back-propagation neural network (BPNN), and support vector regression of different types/kernels/parameter values. The R2, root mean square error and relative error in rice LNC estimation using these different methods were compared through the passive and active spectral measurements of rice leaves of different varieties at different locations and time (Yongyou 4949, Suizhou, 2014, Yangliangyou 6, Wuhan, 2015). Results demonstrate that BPNN provided generally satisfactory performance in estimating rice LNC using the three kinds of passive and active reflectance spectra.

Nitrogen is an essential nutrient element in crop photosynthesis and yield improvement. Thus, it is urgent and important to accurately estimate the leaf nitrogen contents (LNC) of crops for precision nitrogen management. Based on the correlation between LNC and reflectance spectra, the hyperspectral LiDAR (HSL) system can determine three-dimensional structural parameters and biochemical changes of crops. Thereby, HSL technology has been widely used to monitor the LNC of crops at leaf and canopy levels. In addition, the laser-induced fluorescence (LIF) of chlorophyll, related to the histological structure and physiological conditions of green plants, can also be utilized to detect nutrient stress in crops. In this study, four regression algorithms, support vector machines (SVMs), partial least squares (PLS) and two artificial neural networks (ANNs), back propagation NNs (BP-NNs) and radial basic function NNs (RBF-NNs), were selected to estimate rice LNC in booting and heading stages based on reflectance and LIF spectra. These four regression algorithms were used for 36 input variables, including the reflectance spectral variables on 32 wavelengths and four peaks of the LIF spectra. A feature weight algorithm was proposed to select different band combinations for the LNC retrieval models. The determination coefficient (R2) and the root mean square error (RMSE) of the retrieval models were utilized to compare their abilities of estimating the rice LNC. The experimental results demonstrate that (I) these four regression methods are useful for estimating rice LNC in the order of RBF-NNs > SVMs > BP-NNs > PLS; (II) The LIF data in two forms, including peaks and indices, display potential in rice LNC retrieval, especially when using the PLS regression (PLSR) model for the relationship of rice LNC with spectral variables. The feature weighting algorithm is an effective and necessary method to determine appropriate band combinations for rice LNC estimation.

Target classification techniques using spectral imagery and light detection and ranging (LiDAR) are widely used in many disciplines. However, none of the existing methods can directly capture spectral and 3D spatial information simultaneously. Multispectral LiDAR was proposed to solve this problem as its data combines spectral and 3D spatial information. Point-based classification experiments have been conducted with the use of multispectral LiDAR; however, the low signal to noise ratio creates salt and pepper noise in the spectral-only classification, thus lowering overall classification accuracy. In our study, a two-step classification approach is proposed to eliminate this noise during target classification: routine classification based on spectral information using spectral reflectance or a vegetation index, followed by neighborhood spatial reclassification. In an experiment, a point cloud was first classified with a routine classifier using spectral information and then reclassified with the k-nearest neighbors (k-NN) algorithm using neighborhood spatial information. Next, a vegetation index (VI) was introduced for the classification of healthy and withered leaves. Experimental results show that our proposed two-step classification method is feasible if the first spectral classification accuracy is reasonable. After the reclassification based on the k-NN algorithm was combined with neighborhood spatial information, accuracies increased by 1.50-11.06%. Regarding identification of withered leaves, VI performed much better than raw spectral reflectance, with producer accuracy increasing from 23.272% to 70.507%. [ABSTRACT FROM AUTHOR]

Remote sensing images have been applied to a wide range of fields, but they are often degraded by various types of stripes, which affect the image visual quality and limit the subsequent processing tasks. Most existing destriping methods fail to exploit the stripe properties adequately, leading to suboptimal performance. Based on a full consideration of the stripe properties, we propose a new destriping model to achieve stripe detection and stripe removal simultaneously. In this model, we adopt the unidirectional total variation regularization to depict the directional property of stripes and the weighted ℓ 2 , 1 -norm regularization to depict the joint sparsity of stripes. Then, we combine the alternating direction method of multipliers and iterative support detection to solve the proposed model effectively. Comparison results on simulated and real data suggest that the proposed method can remove and detect stripes effectively while preserving image edges and details.