Search

Over the past two decades, the airborne Light Detection and Ranging (LiDAR) system has become a useful tool for acquiring high-resolution topographic data, especially in active tectonics studies. Analyzing Digital Terrain Models (DTMs) from LiDAR exposes morpho-structural elements, aiding in the understanding of fault zones, among other applications. Despite its effectiveness, challenges persist in regions with rapid deformation, dense vegetation, and human impact. We propose an adapted workflow transitioning from the conventional airborne LiDAR system to the usage of drone-based LiDAR technology for higher-resolution data acquisition. Additionally, drones offer a more cost-effective solution, both in an initial investment and ongoing operational expenses. Our goal is to demonstrate how drone-based LiDAR enhances the identification of active deformation features, particularly for earthquake-induced surface faulting. To evaluate the potential of our technique, we conducted a drone-based LiDAR survey in the Casamicciola Terme area, north of Ischia Island, Italy, known for the occurrence of destructive shallow earthquakes, including the 2017 Md = 4 event. We assessed the quality of our acquired DTM by comparing it with existing elevation datasets for the same area. We discuss the advantages and limitations of each DTM product in relation to our results, particularly when applied to fault mapping. By analyzing derivative DTM products, we identified the fault scarps within the Casamicciola Holocene Graben (CHG) and mapped its structural geometry in detail. The analysis of both linear and areal geomorphic features allowed us to identify the primary factors influencing the current morphological arrangement of the CHG area. Our detailed map depicts a nested graben formed by two main structures (the Maio and Sentinella faults) and minor internal faults (the Purgatorio and Nizzola faults). High-resolution DEMs acquired by drone-based LiDAR facilitated detailed studies of the geomorphology and fault activity. A similar approach can be applied in regions where the evidence of high slip-rate faults is difficult to identify due to vegetation cover and inaccessibility. [ABSTRACT FROM AUTHOR]

Over the past two decades, the airborne Light Detection and Ranging (LiDAR) system has become a useful tool for acquiring high-resolution topographic data, especially in active tectonics studies. Analyzing Digital Terrain Models (DTMs) from LiDAR exposes morpho-structural elements, aiding in the understanding of fault zones, among other applications. Despite its effectiveness, challenges persist in regions with rapid deformation, dense vegetation, and human impact. We propose an adapted workflow transitioning from the conventional airborne LiDAR system to the usage of drone-based LiDAR technology for higher-resolution data acquisition. Additionally, drones offer a more cost-effective solution, both in an initial investment and ongoing operational expenses. Our goal is to demonstrate how drone-based LiDAR enhances the identification of active deformation features, particularly for earthquake-induced surface faulting. To evaluate the potential of our technique, we conducted a drone-based LiDAR survey in the Casamicciola Terme area, north of Ischia Island, Italy, known for the occurrence of destructive shallow earthquakes, including the 2017 Md = 4 event. We assessed the quality of our acquired DTM by comparing it with existing elevation datasets for the same area. We discuss the advantages and limitations of each DTM product in relation to our results, particularly when applied to fault mapping. By analyzing derivative DTM products, we identified the fault scarps within the Casamicciola Holocene Graben (CHG) and mapped its structural geometry in detail. The analysis of both linear and areal geomorphic features allowed us to identify the primary factors influencing the current morphological arrangement of the CHG area. Our detailed map depicts a nested graben formed by two main structures (the Maio and Sentinella faults) and minor internal faults (the Purgatorio and Nizzola faults). High-resolution DEMs acquired by drone-based LiDAR facilitated detailed studies of the geomorphology and fault activity. A similar approach can be applied in regions where the evidence of high slip-rate faults is difficult to identify due to vegetation cover and inaccessibility.

We performed a joined multitemporal and multiscale analysis of ground vertical movements around the main seismogenic source of Ischia island (Southern Italy) that, during historical and recent time, generated the most catastrophic earthquakes on the island, in its northern sector (Casamicciola fault). In particular, we considered InSAR (2015–2019) and ground-levelling data (1987–2010), attempting to better define the source that caused the recent 2017 earthquake and interpret its occurrence in the framework of a long-term behavior of the fault responsible for the major historical earthquakes in Casamicciola. Our results unambiguously constrain the location and the kinematics of the 2017 rupture and further confirm the presence of a relatively large sliding area west of the 2017 surface break. Overall, the studied seismogenic fault reveals a complex dynamic, moving differentially and aseismically in the pre- and post-seismic event, in response to the long-term subsidence of the central sector of the island, dominated by Mt. Epomeo. The fault segment that slipped coseismically also is evidence of post-seismic viscous relaxation. The long-term differential vertical movement on the apparently creeping eastern sector of the Casamicciola fault provides an estimate of the slip rate occurring on the fault (0.82 mm/y−1). The analysis of the time of occurrence and the magnitude of the known historical earthquakes reveals that this rate is consistent with the recurrence of the earthquakes that occurred during at least the past three centuries and suggests that the time to the next seismic event at Casamicciola might be a few decades. More generally, our findings provide evidence of the link between subsidence and earthquakes in volcanic areas indicating, in this case, a high hazard for the island of Ischia. Results might be also useful for characterizing capable faulting in similar volcano-tectonic settings worldwide. [ABSTRACT FROM AUTHOR]

We performed a joined multitemporal and multiscale analysis of ground vertical movements around the main seismogenic source of Ischia island (Southern Italy) that, during historical and recent time, generated the most catastrophic earthquakes on the island, in its northern sector (Casamicciola fault). In particular, we considered InSAR (2015–2019) and ground-levelling data (1987–2010), attempting to better define the source that caused the recent 2017 earthquake and interpret its occurrence in the framework of a long-term behavior of the fault responsible for the major historical earthquakes in Casamicciola. Our results unambiguously constrain the location and the kinematics of the 2017 rupture and further confirm the presence of a relatively large sliding area west of the 2017 surface break. Overall, the studied seismogenic fault reveals a complex dynamic, moving differentially and aseismically in the pre- and post-seismic event, in response to the long-term subsidence of the central sector of the island, dominated by Mt. Epomeo. The fault segment that slipped coseismically also is evidence of post-seismic viscous relaxation. The long-term differential vertical movement on the apparently creeping eastern sector of the Casamicciola fault provides an estimate of the slip rate occurring on the fault (0.82 mm/y−1). The analysis of the time of occurrence and the magnitude of the known historical earthquakes reveals that this rate is consistent with the recurrence of the earthquakes that occurred during at least the past three centuries and suggests that the time to the next seismic event at Casamicciola might be a few decades. More generally, our findings provide evidence of the link between subsidence and earthquakes in volcanic areas indicating, in this case, a high hazard for the island of Ischia. Results might be also useful for characterizing capable faulting in similar volcano-tectonic settings worldwide.

The Neapolitan volcanic area includes three active and high-risk volcanoes: Campi Flegrei caldera, Somma–Vesuvius, and Ischia island. The Campi Flegrei volcanic area is a typical example of a resurgent caldera, characterized by intense uplift periods followed by subsidence phases (bradyseism). After about 21 years of subsidence following the 1982–1984 unrest, a new inflation period started in 2005 and, with increasing rates over time, is ongoing. The overall uplift from 2005 to December 2019 is about 65 cm. This paper provides the history of the recent Campi Flegrei caldera unrest and an overview of the ground deformation patterns of the Somma–Vesuvius and Ischia volcanoes from continuous GPS observations. In the 2000–2019 time span, the GPS time series allowed the continuous and accurate tracking of ground and seafloor deformation of the whole volcanic area. With the aim of improving the research on volcano dynamics and hazard assessment, the full dataset of the GPS time series from the Neapolitan volcanic area from January 2000 to December 2019 is presented and made available to the scientific community.

The Neapolitan volcanic area includes three active and high-risk volcanoes: Campi Flegrei caldera, Somma–Vesuvius, and Ischia island. The Campi Flegrei volcanic area is a typical example of a resurgent caldera, characterized by intense uplift periods followed by subsidence phases (bradyseism). After about 21 years of subsidence following the 1982–1984 unrest, a new inflation period started in 2005 and, with increasing rates over time, is ongoing. The overall uplift from 2005 to December 2019 is about 65 cm. This paper provides the history of the recent Campi Flegrei caldera unrest and an overview of the ground deformation patterns of the Somma–Vesuvius and Ischia volcanoes from continuous GPS observations. In the 2000–2019 time span, the GPS time series allowed the continuous and accurate tracking of ground and seafloor deformation of the whole volcanic area. With the aim of improving the research on volcano dynamics and hazard assessment, the full dataset of the GPS time series from the Neapolitan volcanic area from January 2000 to December 2019 is presented and made available to the scientific community. [ABSTRACT FROM AUTHOR]