Search

At present, snow depth inversion based on active microwave remote sensing is concerned essentially with areas having a relatively simple underlying surface. The existence of forests reduces the sensitivity of microwaves to snow, which often makes the snow depth inversion results uncertain. This paper presents a snow depth estimation algorithm for forest areas by introducing a forest phase to characterize the effect of forests on backscattering electromagnetic wave. Firstly, the interferogram is generated with the differential interference of two-pass master-slave Synthetic Aperture Radar (SAR) images, and the real phase under snow cover condition is obtained by phase unwrapping. Secondly, the phase models for forest and non-forest areas are constructed. The effects of forest cover are modeled as forest phase in the forest phase model, which is estimated under the assumption of snow depth consistency on both sides of the boundaries between forest and non-forest areas. Finally, snow depth is estimated by the snow phase-depth model. The correctness of the proposed forest snow depth inversion algorithm was verified by taking the Jiagedaqi area of Greater Xing'an Mountains as the study area and sentinel-1 dual polarization images as the data source. Finally, the snow depth distribution of the study area was obtained with a spatial resolution of 30 m on 7 December 2020. The experimental results show that the snow depth values estimated in Jiagedaqi area are mainly between 40–120 cm, and the average snow depth value is 80.27 cm. Taking the snow depth value of 84.69 cm reckoned from hourly accumulated snowfall in Jiagedaqi as the reference snow depth, the results of the estimated snow depth are relatively consistent and well-founded. With the introduction of the forest phase, the average snow depth values estimated in the forest area increase by 5.98 cm, which reduces the underestimation of the snow depth in forest areas. [ABSTRACT FROM AUTHOR]

At present, snow depth inversion based on active microwave remote sensing is concerned essentially with areas having a relatively simple underlying surface. The existence of forests reduces the sensitivity of microwaves to snow, which often makes the snow depth inversion results uncertain. This paper presents a snow depth estimation algorithm for forest areas by introducing a forest phase to characterize the effect of forests on backscattering electromagnetic wave. Firstly, the interferogram is generated with the differential interference of two-pass master-slave Synthetic Aperture Radar (SAR) images, and the real phase under snow cover condition is obtained by phase unwrapping. Secondly, the phase models for forest and non-forest areas are constructed. The effects of forest cover are modeled as forest phase in the forest phase model, which is estimated under the assumption of snow depth consistency on both sides of the boundaries between forest and non-forest areas. Finally, snow depth is estimated by the snow phase-depth model. The correctness of the proposed forest snow depth inversion algorithm was verified by taking the Jiagedaqi area of Greater Xing’an Mountains as the study area and sentinel-1 dual polarization images as the data source. Finally, the snow depth distribution of the study area was obtained with a spatial resolution of 30 m on 7 December 2020. The experimental results show that the snow depth values estimated in Jiagedaqi area are mainly between 40–120 cm, and the average snow depth value is 80.27 cm. Taking the snow depth value of 84.69 cm reckoned from hourly accumulated snowfall in Jiagedaqi as the reference snow depth, the results of the estimated snow depth are relatively consistent and well-founded. With the introduction of the forest phase, the average snow depth values estimated in the forest area increase by 5.98 cm, which reduces the underestimation of the snow depth in forest areas.

Phase analysis based on high-quality pixel (HQP) is crucial to ensure the measurement accuracy of ground-based SAR (GB-SAR). The amplitude dispersion (ADI) criterion has been widely applied to identify pixels with high amplitude stability, i.e., permanent scatterers (PSs), which typically are point-wise scatterers such as stones or man-made structures. However, the PS number in natural scenes is few and limits the GB-SAR applications. This paper proposes an improved method to take HQP selection applied for natural scenes in GB-SAR interferometry. In order to increase the spatial density of HQP for phase measurement, three types of HQPs including PS, quasi-permanent scatter (QPS), and distributed scatter (DS), are selected with different criteria. The ADI method is firstly utilized to take PS selection. To select those pixels with high phase stability but moderate amplitude stability, the temporal phase coherence (TPC) is defined. Those pixels with moderate ADI values and high TPC are selected as QPSs. Then the feasibility of the DS technique is explored. To validate the feasibility of the proposed method, 2370 GB-SAR images of a natural slope are processed. Experimental results prove that the HQP number could be significantly increased while slightly sacrificing phase quality.

A large amount of fresh water resources are stored in the snowpack, which is the primary source of water for streamflow in many places at middle-to-high latitude areas. Therefore, snow water equivalent (SWE) is a key parameter in the water cycle. Active and passive microwave remote sensing methods have been used to retrieve SWE due to relatively poor resolution of current in situ interpolated maps with good accuracy. However, estimation of SWE has proved challenging, despite several decades of efforts to develop retrieval approaches. Active sensors provide higher-resolution observations. Two recent promising retrieval algorithms using active data are dual frequency dual polarization backscattered power and differential interferometry. These retrieval algorithms have some restrictions on snow characteristics, the environment, and instrument properties. The restrictions limit the snow that is suitable for the specific retrieval algorithm. In order to better understand how much of the snowpack satisfies the precondition of these retrieval approaches, we use a 4 km gridded snowpack product over the contiguous US for years 1997 and 2015. We use a simple scattering model to simulate the scattering characteristics of snow. The snow property maps, simulated scattering characteristics of snow, and environmental conditions are used to filter the suitable snow for each retrieval algorithm. We show that snow wetness and vegetation coverage are the two main limiting conditions for these retrieval algorithms. We show that 39% and 44% of the grid-points with snow satisfy the preconditions of dual polarization dual frequency retrieval algorithms at 13.5 GHz (one of the recommended frequencies for this algorithm in the literature) in 1997 and 2015, respectively. The most important limiting factors for dual polarization dual frequency retrieval method are dryness of snow, penetration depth, and vegetation-free constraints. The backscattered power in dual polarization dual frequency method is more sensitive to snow density and grain radius rather than to snow depth. We also show that 55% and 53% of the grid-points with snow satisfy the precondition of differential interferometry retrieval algorithms at 1 GHz (one of the recommended frequencies for this algorithm in the literature) in 1997 and 2015, respectively. The most important precondition-limiting factors for differential interferometry are dryness of snow and vegetation-free constraints. The differential interferometry phase retrieval algorithm is equally sensitive to snow height and snow density variations and is independent of snow grain radius.

Accurate, high-resolution maps of for crop growth monitoring are strongly needed by precision agriculture. The information source for such maps has been supplied by satellite-borne radars and optical sensors, and airborne and drone-borne optical sensors. This article presents a novel methodology for obtaining growth deficit maps with an accuracy down to 5 cm and a spatial resolution of 1 m, using differential synthetic aperture radar interferometry (DInSAR). Results are presented with measurements of a drone-borne DInSAR operating in three bands—P, L and C. The decorrelation time of L-band for coffee, sugar cane and corn, and the feasibility for growth deficit maps generation are discussed. A model is presented for evaluating the growth deficit of a corn crop in L-band, starting with 50 cm height. This work shows that the drone-borne DInSAR has potential as a complementary tool for precision agriculture.

Differential synthetic aperture radar interferometry (DInSAR) has been widely applied since the pioneering space-borne experiment in 1989, and subsequently with the launch of the ERS-1 program in 1992. The DInSAR technique is well assessed in the case of space-borne SAR data, whereas in the case of data acquired from aerial platforms, such as airplanes, helicopters, and drones, the effective application of this technique is still a challenging task, mainly due to the limited accuracy of the information provided by the navigation systems mounted onboard the platforms. The first airborne DInSAR results for measuring ground displacement appeared in 2003 using L- and X-bands. DInSAR displacement results with long correlation time in P-band were published in 2011. This letter presents a SAR system and, to the best of our knowledge, the first accuracy assessment of the DInSAR technique using a drone-borne SAR in L-band. A deformation map is shown, and the accuracy and resolution of the methodology are presented and discussed. In particular, we have obtained an accuracy better than 1 cm for the measurement of the observed ground displacement. It is in the same order as that achieved with space-borne systems in C- and X-bands and the airborne systems in X-band. However, compared to these systems, we use here a much longer wavelength. Moreover, compared to the satellite experiments available in the literature and aimed at assessing the accuracy of the DInSAR technique, we use only two flight tracks with low time decorrelation effects and not a big data stack, which helps in reducing the atmospheric effects.

This Special Issue hosts papers related to deformation monitoring in urban areas based on two main techniques: Persistent Scatterer Interferometry (PSI) and Synthetic Aperture Radar (SAR) Tomography (TomoSAR). Several contributions highlight the capabilities of Interferometric SAR (InSAR) and PSI techniques for urban deformation monitoring. In this Special Issue, a wide range of InSAR and PSI applications are addressed. Some contributions show the advantages of TomoSAR in un-mixing multiple scatterers for urban mapping and monitoring. This issue includes a contribution that compares PSI and TomoSAR and another one that uses polarimetric data for TomoSAR.

In this paper, persistent scatterer interferometry and Synthetic Aperture Radar (SAR) tomography have been applied to Sentinel-1 data for urban monitoring. The paper analyses the applicability of SAR tomography to Sentinel-1 data, which is not granted, due to the reduced range and azimuth resolutions and the low resolution in elevation. In a first part of the paper, two implementations of the two techniques are described. In the experimental part, the two techniques are used in parallel to process the same Sentinel-1 data over two test areas. An intercomparison of the results from persistent scatterer interferometry and SAR tomography is carried out, comparing the main parameters estimated by the two techniques. Finally, the paper addresses the complementarity of the two techniques, and in particular it assesses the increase of measurement density that can be achieved by adding the double scatterers from SAR tomography to the persistent scatterer interferometry measurements.

The estimation of deformation parameters using persistent scatterer interferometry (PSI) is limited to single dominant coherent scatterers. As such, it rejects layovers wherein multiple scatterers are interfering in the same range-azimuth resolution cell. Differential synthetic aperture radar (SAR) tomography can improve deformation sampling as it has the ability to resolve layovers by separating the interfering scatterers. In this way, both PSI and tomography inevitably require a means to detect coherent scatterers, i.e., to perform hypothesis testing to decide whether a given candidate scatterer is coherent. This paper reports the application of a detection strategy in the context of “tomography as an add-on to PSI”. As the performance of a detector is typically linked to the statistical description of the underlying mathematical model, we investigate how the statistics of the phase instabilities in the PSI analysis are carried forward to the subsequent tomographic analysis. While phase instabilities in PSI are generally modeled as an additive noise term in the interferometric phase model, their impact in SAR tomography manifests as a multiplicative disturbance. The detection strategy proposed in this paper allows extending the same quality considerations as used in the prior PSI processing (in terms of the dispersion of the residual phase) to the subsequent tomographic analysis. In particular, the hypothesis testing for the detection of coherent scatterers is implemented such that the expected probability of false alarm is consistent between PSI and tomography. The investigation is supported with empirical analyses on an interferometric data stack comprising 50 TerraSAR-X acquisitions in stripmap mode, over the city of Barcelona, Spain, from 2007–2012.

Monitoring of active faults in urban areas is of great importance, providing useful information to assess seismic hazards and risks. The present study concerns the monitoring of the potential ground deformation caused by the active tectonism in the cities of Patras and Pyrgos in Western Greece. A PS interferometric analysis technique was applied using a rich data–set of ERS–1 & 2 SLC images. The results of the interferometric analysis were compared with the tectonic maps of the two cities. Patras show clearer uplift–subsidence results due to the more distinct fault pattern and intense deformation compared to the Pyrgos area, where more diffused deformation is observed, with no significant displacements on the surface.

Monitoring of active faults in urban areas is of great importance, providing useful information to assess seismic hazards and risks. The present study concerns the monitoring of the potential ground deformation caused by the active tectonism in the cities of Patras and Pyrgos in Western Greece. A PS interferometric analysis technique was applied using a rich data-set of ERS-1 & 2 SLC images. The results of the interferometric analysis were compared with the tectonic maps of the two cities. Patras show clearer uplift-subsidence results due to the more distinct fault pattern and intense deformation compared to the Pyrgos area, where more diffused deformation is observed, with no significant displacements on the surface. [ABSTRACT FROM AUTHOR]

Phase analysis based on high-quality pixel (HQP) is crucial to ensure the measurement accuracy of ground-based SAR (GB-SAR). The amplitude dispersion (ADI) criterion has been widely applied to identify pixels with high amplitude stability, i.e., permanent scatterers (PSs), which typically are point-wise scatterers such as stones or man-made structures. However, the PS number in natural scenes is few and limits the GB-SAR applications. This paper proposes an improved method to take HQP selection applied for natural scenes in GB-SAR interferometry. In order to increase the spatial density of HQP for phase measurement, three types of HQPs including PS, quasi-permanent scatter (QPS), and distributed scatter (DS), are selected with different criteria. The ADI method is firstly utilized to take PS selection. To select those pixels with high phase stability but moderate amplitude stability, the temporal phase coherence (TPC) is defined. Those pixels with moderate ADI values and high TPC are selected as QPSs. Then the feasibility of the DS technique is explored. To validate the feasibility of the proposed method, 2370 GB-SAR images of a natural slope are processed. Experimental results prove that the HQP number could be significantly increased while slightly sacrificing phase quality. [ABSTRACT FROM AUTHOR]

A large amount of fresh water resources are stored in the snowpack, which is the primary source of water for streamflow in many places at middle-to-high latitude areas. Therefore, snow water equivalent (SWE) is a key parameter in the water cycle. Active and passive microwave remote sensing methods have been used to retrieve SWE due to relatively poor resolution of current in situ interpolated maps with good accuracy. However, estimation of SWE has proved challenging, despite several decades of efforts to develop retrieval approaches. Active sensors provide higher-resolution observations. Two recent promising retrieval algorithms using active data are dual frequency dual polarization backscattered power and differential interferometry. These retrieval algorithms have some restrictions on snow characteristics, the environment, and instrument properties. The restrictions limit the snow that is suitable for the specific retrieval algorithm. In order to better understand how much of the snowpack satisfies the precondition of these retrieval approaches, we use a 4 km gridded snowpack product over the contiguous US for years 1997 and 2015. We use a simple scattering model to simulate the scattering characteristics of snow. The snow property maps, simulated scattering characteristics of snow, and environmental conditions are used to filter the suitable snow for each retrieval algorithm. We show that snow wetness and vegetation coverage are the two main limiting conditions for these retrieval algorithms. We show that 39% and 44% of the grid-points with snow satisfy the preconditions of dual polarization dual frequency retrieval algorithms at 13.5 GHz (one of the recommended frequencies for this algorithm in the literature) in 1997 and 2015, respectively. The most important limiting factors for dual polarization dual frequency retrieval method are dryness of snow, penetration depth, and vegetation-free constraints. The backscattered power in dual polarization dual frequency method is more sensitive to snow density and grain radius rather than to snow depth. We also show that 55% and 53% of the grid-points with snow satisfy the precondition of differential interferometry retrieval algorithms at 1 GHz (one of the recommended frequencies for this algorithm in the literature) in 1997 and 2015, respectively. The most important precondition-limiting factors for differential interferometry are dryness of snow and vegetation-free constraints. The differential interferometry phase retrieval algorithm is equally sensitive to snow height and snow density variations and is independent of snow grain radius. [ABSTRACT FROM AUTHOR]

Differential synthetic aperture radar interferometry (DInSAR) has been widely applied since the pioneering space-borne experiment in 1989, and subsequently with the launch of the ERS-1 program in 1992. The DInSAR technique is well assessed in the case of space-borne SAR data, whereas in the case of data acquired from aerial platforms, such as airplanes, helicopters, and drones, the effective application of this technique is still a challenging task, mainly due to the limited accuracy of the information provided by the navigation systems mounted onboard the platforms. The first airborne DInSAR results for measuring ground displacement appeared in 2003 using L- and X-bands. DInSAR displacement results with long correlation time in P-band were published in 2011. This letter presents a SAR system and, to the best of our knowledge, the first accuracy assessment of the DInSAR technique using a drone-borne SAR in L-band. A deformation map is shown, and the accuracy and resolution of the methodology are presented and discussed. In particular, we have obtained an accuracy better than 1 cm for the measurement of the observed ground displacement. It is in the same order as that achieved with space-borne systems in C- and X-bands and the airborne systems in X-band. However, compared to these systems, we use here a much longer wavelength. Moreover, compared to the satellite experiments available in the literature and aimed at assessing the accuracy of the DInSAR technique, we use only two flight tracks with low time decorrelation effects and not a big data stack, which helps in reducing the atmospheric effects. [ABSTRACT FROM AUTHOR]

Accurate, high-resolution maps of for crop growth monitoring are strongly needed by precision agriculture. The information source for such maps has been supplied by satellite-borne radars and optical sensors, and airborne and drone-borne optical sensors. This article presents a novel methodology for obtaining growth deficit maps with an accuracy down to 5 cm and a spatial resolution of 1 m, using differential synthetic aperture radar interferometry (DInSAR). Results are presented with measurements of a drone-borne DInSAR operating in three bands—P, L and C. The decorrelation time of L-band for coffee, sugar cane and corn, and the feasibility for growth deficit maps generation are discussed. A model is presented for evaluating the growth deficit of a corn crop in L-band, starting with 50 cm height. This work shows that the drone-borne DInSAR has potential as a complementary tool for precision agriculture. [ABSTRACT FROM AUTHOR]

This Special Issue hosts papers related to deformation monitoring in urban areas based on two main techniques: Persistent Scatterer Interferometry (PSI) and Synthetic Aperture Radar (SAR) Tomography (TomoSAR). Several contributions highlight the capabilities of Interferometric SAR (InSAR) and PSI techniques for urban deformation monitoring. In this Special Issue, a wide range of InSAR and PSI applications are addressed. Some contributions show the advantages of TomoSAR in un-mixing multiple scatterers for urban mapping and monitoring. This issue includes a contribution that compares PSI and TomoSAR and another one that uses polarimetric data for TomoSAR. [ABSTRACT FROM AUTHOR]

In this paper, persistent scatterer interferometry and Synthetic Aperture Radar (SAR) tomography have been applied to Sentinel-1 data for urban monitoring. The paper analyses the applicability of SAR tomography to Sentinel-1 data, which is not granted, due to the reduced range and azimuth resolutions and the low resolution in elevation. In a first part of the paper, two implementations of the two techniques are described. In the experimental part, the two techniques are used in parallel to process the same Sentinel-1 data over two test areas. An intercomparison of the results from persistent scatterer interferometry and SAR tomography is carried out, comparing the main parameters estimated by the two techniques. Finally, the paper addresses the complementarity of the two techniques, and in particular it assesses the increase of measurement density that can be achieved by adding the double scatterers from SAR tomography to the persistent scatterer interferometry measurements. [ABSTRACT FROM AUTHOR]

The estimation of deformation parameters using persistent scatterer interferometry (PSI) is limited to single dominant coherent scatterers. As such, it rejects layovers wherein multiple scatterers are interfering in the same range-azimuth resolution cell. Differential synthetic aperture radar (SAR) tomography can improve deformation sampling as it has the ability to resolve layovers by separating the interfering scatterers. In this way, both PSI and tomography inevitably require a means to detect coherent scatterers, i.e., to perform hypothesis testing to decide whether a given candidate scatterer is coherent. This paper reports the application of a detection strategy in the context of "tomography as an add-on to PSI". As the performance of a detector is typically linked to the statistical description of the underlying mathematical model, we investigate how the statistics of the phase instabilities in the PSI analysis are carried forward to the subsequent tomographic analysis. While phase instabilities in PSI are generally modeled as an additive noise term in the interferometric phase model, their impact in SAR tomography manifests as a multiplicative disturbance. The detection strategy proposed in this paper allows extending the same quality considerations as used in the prior PSI processing (in terms of the dispersion of the residual phase) to the subsequent tomographic analysis. In particular, the hypothesis testing for the detection of coherent scatterers is implemented such that the expected probability of false alarm is consistent between PSI and tomography. The investigation is supported with empirical analyses on an interferometric data stack comprising 50 TerraSAR-X acquisitions in stripmap mode, over the city of Barcelona, Spain, from 2007–2012. [ABSTRACT FROM AUTHOR]