Search

On 13 January 2012, the Italian vessel Costa Concordia wrecked on the shore of Giglio Island, about 15 km off the coast of southern Tuscany (Italy), causing the loss of 32 lives. It is considered one of the worst disasters in maritime history. Salvage operations started immediately after the wreck with the coordination of the Italian National Civil Protection Department and the technological support of several Research Centers, which were activated for the management of the consequent emergency phase. A multi-parametric and multiplatform monitoring system was promptly implemented, involving several advanced remote sensing techniques, among which was Infrared Thermography (IRT). In this framework, IRT monitoring was performed during a 35-day period (25 January–1 March 2012), using a terrestrial, hand-held thermal camera. Six different thermal images were acquired daily from the island's coastline in three different positions, both in daylight and night times. The aim was to detect thermal anomalies connected to possible deformations of the vessel and oil spills. Between 3–4 February, IRT successfully revealed on oil spill drifting from the stern of the wreck towards the island harbor. Furthermore, the wreck's thermal dilatation was also analyzed during a 24-day close-range monitoring, providing interesting insights for the interpretation of the deformation monitoring results. This paper presents the outcomes of these innovative and experimental monitoring activities, with the aim of testing the potential of IRT as a versatile and operative tool to be used in maritime and environmental disaster response. [ABSTRACT FROM AUTHOR]

This paper introduces a methodology for predicting and mapping surface motion beneath road pavement structures caused by environmental factors. Persistent Scatterer Interferometric Synthetic Aperture Radar (PS-InSAR) measurements, geospatial analyses, and Machine Learning Algorithms (MLAs) are employed for achieving the purpose. Two single learners, i.e., Regression Tree (RT) and Support Vector Machine (SVM), and two ensemble learners, i.e., Boosted Regression Trees (BRT) and Random Forest (RF) are utilized for estimating the surface motion ratio in terms of mm/year over the Province of Pistoia (Tuscany Region, central Italy, 964 km2), in which strong subsidence phenomena have occurred. The interferometric process of 210 Sentinel-1 images from 2014 to 2019 allows exploiting the average displacements of 52,257 Persistent Scatterers as output targets to predict. A set of 29 environmental-related factors are preprocessed by SAGA-GIS, version 2.3.2, and ESRI ArcGIS, version 10.5, and employed as input features. Once the dataset has been prepared, three wrapper feature selection approaches (backward, forward, and bi-directional) are used for recognizing the set of most relevant features to be used in the modeling. A random splitting of the dataset in 70% and 30% is implemented to identify the training and test set. Through a Bayesian Optimization Algorithm (BOA) and a 10-Fold Cross-Validation (CV), the algorithms are trained and validated. Therefore, the Predictive Performance of MLAs is evaluated and compared by plotting the Taylor Diagram. Outcomes show that SVM and BRT are the most suitable algorithms; in the test phase, BRT has the highest Correlation Coefficient (0.96) and the lowest Root Mean Square Error (0.44 mm/year), while the SVM has the lowest difference between the standard deviation of its predictions (2.05 mm/year) and that of the reference samples (2.09 mm/year). Finally, algorithms are used for mapping surface motion over the study area. We propose three case studies on critical stretches of two-lane rural roads for evaluating the reliability of the procedure. Road authorities could consider the proposed methodology for their monitoring, management, and planning activities. [ABSTRACT FROM AUTHOR]

Monitoring soil organic carbon (SOC) typically assumes conducting a labor-intensive soil sampling campaign, followed by laboratory testing, which is both expensive and impractical for generating useful, spatially continuous data products. The present study leverages the power of machine learning (ML) and, in particular, deep neural networks (DNNs) for segmentation, as well as satellite imagery, to estimate the SOC remotely. We propose a new two-stage pipeline for remote SOC estimation, which relies on using a DNN trained to classify land cover to perform feature extraction, while the SOC estimation is performed by a different ML model. The first stage is an image segmentation DNN with the U-Net architecture, which is trained to estimate the land cover for an observed geographical region, based on multi-spectral images taken by the Sentinel-2 satellite constellation. This estimator is subsequently used to extract the latent feature vector for each of the output pixels, by rolling back from the output (dense) layer of the U-Net and accessing the last available convolutional layer of the same dimension as our desired output. The second stage is trained on a set of feature vectors extracted at the coordinates for which manual SOC measurements exist. We tested a variety of ML models and report on their performance. Using the best extremely randomized trees model, we generated a spatially continuous map of SOC estimations for the region of Tuscany, in Italy, with a resolution of 10 m, to share with the researchers as a means of validating the results and to demonstrate the efficiency of the proposed approach, which can can easily be scaled to create a global continuous SOC map. [ABSTRACT FROM AUTHOR]

In this paper, multi-frequency synthetic aperture radar (SAR) data at L- and C-bands (ALOS PALSAR and Envisat/ASAR) were used to estimate forest biomass in Tuscany, in Central Italy. The ground measurements of woody volume (WV, in m3/ha), which can be considered as a proxy of forest biomass, were retrieved from the Italian National Forest Inventory (NFI). After a preliminary investigation to assess the sensitivity of backscatter at C- and L-bands to forest biomass, an approach based on an artificial neural network (ANN) was implemented. The ANN was trained using the backscattering coefficient at L-band (ALOS PALSAR, HH and HV polarization) and C-band (Envisat ASAR in HH polarization) as inputs. Spatially distributed WV values for the entire test area were derived by the integration (fusion) of a canopy height map derived from the Ice, Cloud, and Land Elevation Geoscience Laser Altimeter System (ICESat GLAS) and the NFI data, in order to build a significant ground truth dataset for the training stage. The analysis of the backscattering sensitivity to WV showed a moderate correlation at L-band and was almost negligible at C-band. Despite this, the ANN algorithm was able to exploit the synergy of SAR frequencies and polarizations, estimating WV with average Pearson's correlation coefficient (R) = 0.96 and root mean square error (RMSE) ≃ 39 m3/ha when applied to the test dataset and average R = 0.86 and RMSE ≃ 75 m3/ha when validated on the direct measurements from the NFI. Considering the heterogeneity of the scenario (Mediterranean mixed forests in hilly landscape) and the small amount of available ground measurements with respect to the spatial variability of different plots, the obtained results can be considered satisfactory. Moreover, the successful use of WV from global maps for implementing the algorithm suggests the possibility to apply the algorithm to wider areas or even to global scales. [ABSTRACT FROM AUTHOR]

Underground mining is one of the human activities with the highest impact in terms of induced ground motion. The excavation of the mining levels creates pillars, rooms and cavities that can evolve in chimney collapses and sinkholes. This is a major threat where the mining activity is carried out in an urban context. Thus, there is a clear need for tools and instruments able to precisely quantify mining-induced deformation. Topographic measurements certainly offer very high spatial accuracy and temporal repeatability, but they lack in spatial distribution of measurement points. In the past decades, Multi-Temporal Satellite Interferometry (MTInSAR) has become one of the most reliable techniques for monitoring ground motion, including mining-induced deformation. Although with well-known limitations when high deformation rates and frequently changing land surfaces are involved, MTInSAR has been exploited to evaluate the surface motion in several mining area worldwide. In this paper, a detailed scale MTInSAR approach was designed to characterize ground deformation in the salt solution mining area of Saline di Volterra (Tuscany Region, central Italy). This mining activity has a relevant environmental impact, depleting the water resource and inducing ground motion; sinkholes are a common consequence. The MTInSAR processing approach is based on the direct integration of interferograms derived from Sentinel-1 images and on the phase splitting between low (LF) and high (HF) frequency components. Phase unwrapping is performed for the LF and HF components on a set of points selected through a "triplets closure" method. The final deformation map is derived by combining again the components to avoid error accumulation and by applying a classical atmospheric phase filtering to remove the remaining low frequency signal. The results obtained reveal the presence of several subsidence bowls, sometimes corresponding to sinkholes formed in the recent past. Very high deformation rates, up to −250 mm/yr, and time series with clear trend changes are registered. In addition, the spatial and temporal distribution of velocities and time series is analyzed, with a focus on the correlation with sinkhole occurrence. [ABSTRACT FROM AUTHOR]

On 13 January 2012, the Italian vessel, Costa Concordia, wrecked offshore Giglio Island, along the coast of Tuscany (Italy). The ship partially sunk, lying on the starboard side on a 22° steep rocky seabed, making the stability conditions of the ship critically in danger of sliding, shifting and settling. The tilted position of the ship created also pernicious conditions for the divers involved in the search and rescue operations. It became immediately clear that a continuous monitoring of the position and movements of the ship was of paramount importance to guarantee the security of the people working around and within the wreck. Starting from January 19, the Italian constellation of synthetic aperture radar (SAR) satellites, COSMO-SkyMed (CSK), was tasked to acquire high resolution images of the wreck. Thanks to CSK's short response and revisiting time and its capability to acquire high resolution images in Spotlight mode, satellite data were integrated within the real time, ground-based monitoring system implemented to provide the civil protection authorities with a regular update on the ship stability. Exploitation of both the phase (satellite radar interferometry, InSAR) and amplitude (speckle tracking) information from CSK images, taken along the acquisition orbit, Enhanced Spotlight (ES)-29, revealed a general movement of the translation of the vessel, consistent with sliding toward the east of the hull on the seabed. A total displacement, with respect to the coastline, of 1666 mm and 345 mm of the bow and stern, respectively, was recorded, over the time period of 19 January-23 March 2012. [ABSTRACT FROM AUTHOR]

For large areas, it is difficult to assess the spatial distribution and inter-annual variation of crop acreages through field surveys. Such information, however, is of great value for governments, land managers, planning authorities, commodity traders and environmental scientists. Time series of coarse resolution imagery offer the advantage of global coverage at low costs, and are therefore suitable for large-scale crop type mapping. Due to their coarse spatial resolution, however, the problem of mixed pixels has to be addressed. Traditional hard classification approaches cannot be applied because of sub-pixel heterogeneity. We evaluate neural networks as a modeling tool for sub-pixel crop acreage estimation. The proposed methodology is based on the assumption that different cover type proportions within coarse pixels prompt changes in time profiles of remotely sensed vegetation indices like the Normalized Difference Vegetation Index (NDVI). Neural networks can learn the relation between temporal NDVI signatures and the sought crop acreage information. This learning step permits a non-linear unmixing of the temporal information provided by coarse resolution satellite sensors. For assessing the feasibility and accuracy of the approach, a study region in central Italy (Tuscany) was selected. The task consisted of mapping the spatial distribution of winter crops abundances within 1 km AVHRR pixels between 1988 and 2001. Reference crop acreage information for network training and validation was derived from high resolution Thematic Mapper/Enhanced Thematic Mapper (TM/ETM+) images and official agricultural statistics. Encouraging results were obtained demonstrating the potential of the proposed approach. For example, the spatial distribution of winter crop acreage at sub-pixel level was mapped with a cross-validated coefficient of determination of 0.8 with respect to the reference information from high resolution imagery. For the eight years for which reference information was available, the root mean squared error (RMSE) of winter crop acreage at sub-pixel level was 10%. When combined with current and future sensors, such as MODIS and Sentinel-3, the unmixing of AVHRR data can help in the building of an extended time series of crop distributions and cropping patterns dating back to the 80s. [ABSTRACT FROM AUTHOR]

The aim of this work is to verify and demonstrate the possibility of using X-band radars to identify, discriminate, characterize and follow small floating aggregations of marine litter (Small Garbage Islands—SGIs) made up mainly of plastic debris. To this end, a radar measurement campaign was carried out on a series of controlled releases into the sea of SGI modules assembled in the lab using the waste collected along a beach near the port of Livorno, in Tuscany, where the X-band radar of the Institute of Bioeconomy (IBE) of the National Research Council (CNR) is installed. The results of this first measurement campaign, which are illustrated in this preliminary work, are of interest to the entire scientific community that operates in the field of macroplastics analysis and monitoring, opening a new experimental avenue for the use of X-band radars also to monitor plastic waste at sea. Furthermore, the results obtained suggest good prospects for the use of X-band radars also for the study of coastal hydrodynamics on a local scale as well as in areas where it would be difficult to carry out measurements employing other technologies. [ABSTRACT FROM AUTHOR]

Bathymetry is considered an important component in marine applications as several coastal erosion monitoring and engineering projects are carried out in this field. It is traditionally acquired via shipboard echo sounding, but nowadays, multispectral satellite imagery is also commonly applied using different remote sensing-based algorithms. Satellite-Derived Bathymetry (SDB) relates the surface reflectance of shallow coastal waters to the depth of the water column. The present study shows the results of the application of Stumpf and Lyzenga algorithms to derive the bathymetry for a small area using an Unmanned Aerial Vehicle (UAV), also known as a drone, equipped with a multispectral camera acquiring images in the same WorldView-2 satellite sensor spectral bands. A hydrographic Multibeam Echosounder survey was performed in the same period in order to validate the method's results and accuracy. The study area was approximately 0.5 km2 and located in Tuscany (Italy). Because of the high percentage of water in the images, a new methodology was also implemented for producing a georeferenced orthophoto mosaic. UAV multispectral images were processed to retrieve bathymetric data for testing different band combinations and evaluating the accuracy as a function of the density and quantity of sea bottom control points. Our results indicate that UAV-Derived Bathymetry (UDB) permits an accuracy of about 20 cm to be obtained in bathymetric mapping in shallow waters, minimizing operative expenses and giving the possibility to program a coastal monitoring surveying activity. The full sea bottom coverage obtained using this methodology permits detailed Digital Elevation Models (DEMs) comparable to a Multibeam Echosounder survey, and can also be applied in very shallow waters, where the traditional hydrographic approach requires hard fieldwork and presents operational limits. [ABSTRACT FROM AUTHOR]

Proximal optical sensors (POSs) are effective devices for monitoring the development of crops and the nitrogen (N) status of plants. POSs are both useful and necessary in facilitating the reduction of N losses into the environment and in attaining higher nitrogen use efficiency (NUE). To date, no comparison of these instruments has been made on quinoa. A field experiment conducted in Tuscany, Italy, with different POSs, has assessed the development of quinoa with respect to N status. Three sets of POSs were used (SPAD-502, GreenSeeker, and Canopeo App.) to monitor quinoa development and growth under different types of fertilizers (digestate and urea) and levels of N fertilization (100, 50, and 0 kg N ha−1). The present findings showed that in-season predictions of crop biomass at harvest by SPAD-502 and GreenSeeker optical sensors were successful in terms of the coefficient of determination (R2 = 0.68 and 0.82, respectively) and statistical significance (p < 0.05), while the Canopeo App. was suitable for monitoring the plant´s canopy expansion and senescence. The relative error (RE%) showed a remarkably high performance between observed and predicted values, 5.80% and 4.12% for GreenSeeker and SPAD-502, respectively. Overall, the POSs were effective devices for monitoring quinoa development during the growing season and for predicting dry biomass at harvest. However, abiotic stresses (e.g., heat-stress conditions at flowering) were shown to reduce POSs' accuracy when estimating seed yields at harvest, and this problem will likely be overcome by advancing the sowing date. [ABSTRACT FROM AUTHOR]

This work describes a new procedure aimed to semi-automatically identify clusters of active persistent scatterers and preliminarily associate them with different potential types of deformational processes over wide areas. This procedure consists of three main modules: (i) ADAfinder, aimed at the detection of Active Deformation Areas (ADA) using Persistent Scatterer Interferometry (PSI) data; (ii) LOS2HV, focused on the decomposition of Line Of Sight (LOS) displacements from ascending and descending PSI datasets into vertical and east-west components; iii) ADAclassifier, that semi-automatically categorizes each ADA into potential deformational processes using the outputs derived from (i) and (ii), as well as ancillary external information. The proposed procedure enables infrastructures management authorities to identify, classify, monitor and categorize the most critical deformations measured by PSI techniques in order to provide the capacity for implementing prevention and mitigation actions over wide areas against geological threats. Zeri, Campiglia Marittima–Suvereto and Abbadia San Salvatore (Tuscany, central Italy) are used as case studies for illustrating the developed methodology. Three PSI datasets derived from the Sentinel-1 constellation have been used, jointly with the geological map of Italy (scale 1:50,000), the updated Italian landslide and land subsidence maps (scale 1:25,000), a 25 m grid Digital Elevation Model, and a cadastral vector map (scale 1:5000). The application to these cases of the proposed workflow demonstrates its capability to quickly process wide areas in very short times and a high compatibility with Geographical Information System (GIS) environments for data visualization and representation. The derived products are of key interest for infrastructures and land management as well as decision-making at a regional scale. [ABSTRACT FROM AUTHOR]

The Versilia plain, a well-known and populated tourist area in northwestern Tuscany, is historically subject to floods. The last hydrogeological disaster of 1996 resulted in 13 deaths and in loss worth hundreds of millions of euros. A valid management of the hydraulic and flooding risks of this territory is therefore mandatory. A 7.5 km-long stretch of the Versilia River was simulated in one-dimension using river cross-sections with the FLO-2D Basic model. Simulations of the channel flow and of its maximum flow rate under different input conditions highlight the key role of topography: uncertainties in the topography introduce much larger errors than the uncertainties in roughness. The best digital elevation model (DEM) available for the area, a 1-m light detection and ranging (LiDAR) DEM dating back to 2008–2010, does not reveal all the hydraulic structures (e.g., the 40 cm thick embankment walls), lowering the maximum flow rate to only 150 m3/s, much lower than the expected value of 400 m3/s. In order to improve the already existing input topography, three different possibilities were considered: (1) to add the embankment walls to the LiDAR data with a targeted Differential GPS (DGPS) survey, (2) to acquire the cross section profiles necessary for simulation with a targeted DGPS survey, and (3) to achieve a very high resolution topography using structure from motion techniques (SfM) from images acquired using an unmanned aerial vehicle (UAV). The simulations based on all these options deliver maximum flow rates in agreement with estimated values. Resampling of the 10 cm cell size SfM-DSM allowed us to investigate the influence of topographic resolution on hydraulic channel flow, demonstrating that a change in the resolution from 30 to 50 cm alone introduced a 10% loss in the maximum flow rate. UAV-SfM-derived DEMs are low cost, relatively fast, very accurate, and they allow for the monitoring of the channel morphology variations in real time and to keep the hydraulic models updated, thus providing an excellent tool for managing hydraulic and flooding risks. [ABSTRACT FROM AUTHOR]

Landslides are considered to be one of the main natural geohazards causing relevant economic damages and social effects worldwide. Italy is one of the countries worldwide most affected by landslides; in the Region of Tuscany alone, more than 100,000 phenomena are known and mapped. The possibility to recognize, investigate, and monitor these phenomena play a key role to avoid further occurrences and consequences. The number of applications of Advanced Differential Interferometric Synthetic Aperture Radar (A-DInSAR) analysis for landslides monitoring and mapping greatly increased in the last decades thanks to the technological advances and the development of advanced processing algorithms. In this work, landslide-induced damage on structures recognized and classified by field survey and velocity of displacement re-projected along the steepest slope were combined in order to extract fragility curves for the hamlets of Patigno and Coloretta, in the Zeri municipality (Tuscany, northern Italy). Images using ERS1/2, ENVISAT, COSMO-SkyMed (CSK) and Sentinel-1 SAR (Synthetic Aperture Radar) were employed to investigate an approximate 25 years of deformation affecting both hamlets. Three field surveys were conducted for recognizing, identifying, and classifying the landslide-induced damage on structures and infrastructures. At the end, the damage probability maps were designed by means of the use of the fragility curves between Sentinel-1 velocities and recorded levels of damage. The results were conceived to be useful for the local authorities and civil protection authorities to improve the land managing and, more generally, for planning mitigation strategies. [ABSTRACT FROM AUTHOR]