38 results
Search Results
2. Evaluating Data Inter-Operability of Multiple UAV–LiDAR Systems for Measuring the 3D Structure of Savanna Woodland.
- Author
-
Bartholomeus, Harm, Calders, Kim, Whiteside, Tim, Terryn, Louise, Krishna Moorthy, Sruthi M., Levick, Shaun R., Bartolo, Renée, and Verbeeck, Hans
- Subjects
SAVANNAS ,VEGETATION monitoring ,FORESTS & forestry ,VEGETATION dynamics ,TREE height - Abstract
For vegetation monitoring, it is crucial to understand which changes are caused by the measurement setup and which changes are true representations of vegetation dynamics. UAV–LiDAR offers great possibilities to measure vegetation structural parameters; however, UAV–LiDAR sensors are undergoing rapid developments, and the characteristics are expected to keep changing over the years, which will introduce data inter-operability issues. Therefore, it is important to determine whether datasets acquired by different UAV–LiDAR sensors can be interchanged and if changes through time can accurately be derived from UAV–LiDAR time series. With this study, we present insights into the magnitude of differences in derived forest metrics in savanna woodland when three different UAV–LiDAR systems are being used for data acquisition. Our findings show that all three systems can be used to derive plot characteristics such as canopy height, canopy cover, and gap fractions. However, there are clear differences between the metrics derived with different sensors, which are most apparent in the lower parts of the canopy. On an individual tree level, all UAV–LiDAR systems are able to accurately capture the tree height in a savanna woodland system, but significant differences occur when crown parameters are measured with different systems. Less precise systems result in underestimations of crown areas and crown volumes. When comparing UAV–LiDAR data of forest areas through time, it is important to be aware of these differences and ensure that data inter-operability issues do not influence the change analysis. In this paper, we want to stress that it is of utmost importance to realise this and take it into consideration when combining datasets obtained with different sensors. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
3. Earth-Observation-Based Monitoring of Forests in Germany—Recent Progress and Research Frontiers: A Review.
- Author
-
Holzwarth, Stefanie, Thonfeld, Frank, Kacic, Patrick, Abdullahi, Sahra, Asam, Sarah, Coleman, Kjirsten, Eisfelder, Christina, Gessner, Ursula, Huth, Juliane, Kraus, Tanja, Shatto, Christopher, Wessel, Birgit, and Kuenzer, Claudia
- Subjects
FOREST monitoring ,SCIENTIFIC literature ,FOREST surveys ,REMOTE sensing ,FOREST mapping ,GEOGRAPHIC names - Abstract
One-third of Germany's land surface area is covered by forest (around 11.4 million hectares), and thus, it characterizes the landscape. The forest is a habitat for a large number of animal and plant species, a source of raw materials, important for climate protection, and a well-being refuge for people, to name just a few of its many functions. During the annual forest condition surveys, the crown condition of German forests is assessed on the basis of field samples at fixed locations, as the crown condition of forest trees is considered an important indicator of their vitality. Since the start of the surveys in 1984, the mean crown defoliation of all tree species has increased, now averaging about 25% for all tree species. Additionally, it shows a strong rise in the rate of dieback. In 2019, the most significant changes were observed. Due to the drastic changes in recent years, efforts are being made to assess the situation of the forest using different remote sensing methods. There are now a number of freely available products provided to the public, and more will follow as a result of numerous projects in the context of earth-observation (EO)-based monitoring and mapping of the forests in Germany. In 2020, the situation regarding the use of remote sensing for the German forest was already investigated in more detail. However, these results no longer reflect the current situation. The changes of the last 3 years are the content of this publication. For this study, 84 citable research publications were thoroughly analyzed and compared with the situation in 2020. As a major result, we found a shift in the research focus towards disturbance monitoring and a tendency to cover larger areas, including national-scale studies. In addition to the review of the scientific literature, we also reviewed current research projects and related products. In congruence to the recent developments in terms of publications in scientific journals, these projects and products reflect the need for comprehensive, timely, large-area, and complementary EO-based information around forests expressed in multiple political programs. With this review, we provide an update of previous work and link it to current research activities. We conclude that there are still gaps between the information needs of forest managers who usually rely on information from field perspectives and the EO-based information products. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
4. Monitoring of Forest Structure Dynamics by Means of L-Band SAR Tomography.
- Author
-
Cazcarra-Bes, Victor, Tello-Alonso, Maria, Fischer, Rico, Heym, Michael, and Papathanassiou, Konstantinos
- Subjects
SYNTHETIC aperture radar ,REFLECTANCE ,FOREST management ,REMOTE sensing ,COMPRESSED sensing - Abstract
Synthetic Aperture Radar Tomography (TomoSAR) allows the reconstruction of the 3D reflectivity of natural volume scatterers such as forests, thus providing an opportunity to infer structure information in 3D. In this paper, the potential of TomoSAR data at L-band to monitor temporal variations of forest structure is addressed using simulated and experimental datasets. First, 3D reflectivity profiles were extracted by means of TomoSAR reconstruction based on a Compressive Sensing (CS) approach. Next, two complementary indices for the description of horizontal and vertical forest structure were defined and estimated by means of the distribution of local maxima of the reconstructed reflectivity profiles. To assess the sensitivity and consistency of the proposed methodology, variations of these indices for different types of forest changes in simulated as well as in real scenarios were analyzed and assessed against different sources of reference data: airborne Lidar measurements, high resolution optical images, and forest inventory data. The forest structure maps obtained indicated the potential to distinguish between different forest stages and the identification of different types of forest structure changes induced by logging, natural disturbance, or forest management. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
5. Identifying Forest Structural Types along an Aridity Gradient in Peninsular Spain: Integrating Low-Density LiDAR, Forest Inventory, and Aridity Index.
- Author
-
Tijerín-Triviño, Julián, Moreno-Fernández, Daniel, Zavala, Miguel A., Astigarraga, Julen, and García, Mariano
- Subjects
FOREST surveys ,FOREST monitoring ,AIRBORNE lasers ,FOREST management ,LIDAR ,RANDOM forest algorithms ,PERCENTILES - Abstract
Forest structure is a key driver of forest functional processes. The characterization of forest structure across spatiotemporal scales is essential for forest monitoring and management. LiDAR data have proven particularly useful for cost-effectively estimating forest structural attributes. This paper evaluates the ability of combined forest inventory data and low-density discrete return airborne LiDAR data to discriminate main forest structural types in the Mediterranean-temperate transition ecotone. Firstly, we used six structural variables from the Spanish National Forest Inventory (SNFI) and an aridity index in a k-medoids algorithm to define the forest structural types. These variables were calculated for 2770 SNFI plots. We identified the main species for each structural type using the SNFI. Secondly, we developed a Random Forest model to predict the spatial distribution of structural types and create wall-to-wall maps from LiDAR data. The k-medoids clustering algorithm enabled the identification of four clusters of forest structures. A total of six out of forty-one potential LiDAR metrics were utilized in our Random Forest, after evaluating their importance in the Random Forest model. Selected metrics were, in decreasing order of importance, the percentage of all returns above 2 m, mean height of the canopy profile, the difference between the 90th and 50th height percentiles, the area under the canopy curve, and the 5th and the 95th percentile of the return heights. The model yielded an overall accuracy of 64.18%. The producer's accuracy ranged between 36.11% and 88.93%. Our results confirm the potential of this approximation for the continuous monitoring of forest structures, which is key to guiding forest management in this region. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
6. Small Field Plots Can Cause Substantial Uncertainty in Gridded Aboveground Biomass Products from Airborne Lidar Data.
- Author
-
Cushman, K. C., Saatchi, Sassan, McRoberts, Ronald E., Anderson-Teixeira, Kristina J., Bourg, Norman A., Chapman, Bruce, McMahon, Sean M., and Mulverhill, Christopher
- Subjects
LIDAR ,AUTOCORRELATION (Statistics) ,BIOMASS ,SPATIAL resolution ,STANDARD deviations ,MODEL validation - Abstract
Emerging satellite radar and lidar platforms are being developed to produce gridded aboveground biomass (AGB) predictions that are poised to expand our understanding of global carbon stocks and changes. However, the spatial resolution of AGB map products from these platforms is often larger than the available field plot data underpinning model calibration and validation efforts. Intermediate-resolution/extent remotely sensed data, like airborne lidar, can serve as a bridge between small plots and map resolution, but methods are needed to estimate and propagate uncertainties with multiple layers of data. Here, we introduce a workflow to estimate the pixel-level mean and variance in AGB maps by propagating uncertainty from a lidar-based model using small plots, taking into account prediction uncertainty, residual uncertainty, and residual spatial autocorrelation. We apply this workflow to estimate AGB uncertainty at a 100 m map resolution (1 ha pixels) using 0.04 ha field plots from 11 sites across four ecoregions. We compare uncertainty estimates using site-specific models, ecoregion-specific models, and a general model using all sites. The estimated AGB uncertainty for 1 ha pixels increased with mean AGB, reaching 7.8–33.3 Mg ha
−1 for site-specific models (one standard deviation), 11.1–28.2 Mg ha−1 for ecoregion-specific models, and 21.1–22.1 Mg ha−1 for the general model for pixels in the AGB range of 80–100 Mg ha−1 . Only 3 of 11 site-specific models had a total uncertainty of <15 Mg ha−1 in this biomass range, suitable for the calibration or validation of AGB map products. Using two additional sites with larger field plots, we show that lidar-based models calibrated with larger field plots can substantially reduce 1 ha pixel AGB uncertainty for the same range from 18.2 Mg ha−1 using 0.04 ha plots to 10.9 Mg ha−1 using 0.25 ha plots and 10.1 Mg ha−1 using 1 ha plots. We conclude that the estimated AGB uncertainty from models estimated from small field plots may be unacceptably large, and we recommend coordinated efforts to measure larger field plots as reference data for the calibration or validation of satellite-based map products at landscape scales (≥0.25 ha). [ABSTRACT FROM AUTHOR]- Published
- 2023
- Full Text
- View/download PDF
7. TomoSAR Mapping of 3D Forest Structure: Contributions of L-Band Configurations.
- Author
-
Pardini, Matteo, Cazcarra-Bes, Victor, and Papathanassiou, Konstantinos P.
- Subjects
FOREST mapping ,SYNTHETIC aperture radar ,BISTATIC radar - Abstract
Synthetic Aperture Radar (SAR) measurements are unique for mapping forest 3D structure and its changes in time. Tomographic SAR (TomoSAR) configurations exploit this potential by reconstructing the 3D radar reflectivity. The frequency of the SAR measurements is one of the main parameters determining the information content of the reconstructed reflectivity in terms of penetration and sensitivity to the individual vegetation elements. This paper attempts to review and characterize the structural information content of L-band TomoSAR reflectivity reconstructions, and their potential to forest structure mapping. First, the challenges in the accurate TomoSAR reflectivity reconstruction of volume scatterers (which are expected to dominate at L-band) and to extract physical structure information from the reconstructed reflectivity is addressed. Then, the L-band penetration capability is directly evaluated by means of the estimation performance of the sub-canopy ground topography. The information content of the reconstructed reflectivity is then evaluated in terms of complementary structure indices. Finally, the dependency of the TomoSAR reconstruction and of its structural information to both the TomoSAR acquisition geometry and the temporal change of the reflectivity that may occur in the time between the TomoSAR measurements in repeat-pass or bistatic configurations is evaluated. The analysis is supported by experimental results obtained by processing airborne acquisitions performed over temperate forest sites close to the city of Traunstein in the south of Germany. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
8. Assessing the Vertical Structure of Forests Using Airborne and Spaceborne LiDAR Data in the Austrian Alps.
- Author
-
Hirschmugl, Manuela, Lippl, Florian, and Sobe, Carina
- Subjects
LIDAR ,ROCKFALL ,BIOMASS ,BIODIVERSITY ,FOREST biomass ,ALGORITHMS ,ALPINE glaciers - Abstract
Vertical structure is an important parameter not only for assessment of the naturalness of a forest and several functional parameters, such as biodiversity or protection from avalanches or rockfall, but also for estimating biomass/carbon content. This study analyses the options for assessing vertical forest structure by using airborne (ALS) and spaceborne LiDAR data (GEDI) in a mountainous near-natural forest in the Austrian Alps. Use of the GEDI waveform data (L1B) is still heavily underexploited for vertical forest structure assessments. Two indicators for explaining forest vertical structure are investigated in this study: foliage height diversity (FHD) and number of layers (NoL). For estimation of NoL, two different approaches were tested: break-detection algorithm (BDA) and expert-based assessment (EBA). The results showed that FHD can be used to separate three structural classes; separability is only slightly better for ALS than for GEDI data on a 25 m diameter plot level. For NoL, EBA clearly outperformed BDA in terms of overall accuracy (OA) by almost 20%. A better OA for NoL was achieved using ALS (49.5%) rather than GEDI data (44.2%). In general, OA is limited by difficult terrain and near-natural forests with high vertical structure. The usability of waveform-based structure parameters is, nonetheless, promising and should be further tested on larger areas, including managed forests and simpler stands. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
9. What Are We Missing? Occlusion in Laser Scanning Point Clouds and Its Impact on the Detection of Single-Tree Morphologies and Stand Structural Variables.
- Author
-
Mathes, Thomas, Seidel, Dominik, Häberle, Karl-Heinz, Pretzsch, Hans, and Annighöfer, Peter
- Subjects
POINT cloud ,EUROPEAN beech ,NORWAY spruce ,TREE height ,LASERS ,OPTICAL scanners ,SPRUCE ,AIRBORNE lasers - Abstract
Laser scanning has revolutionized the ability to quantify single-tree morphologies and stand structural variables. In this study, we address the issue of occlusion when scanning a spruce (Picea abies (L.) H.Karst.) and beech (Fagus sylvatica L.) forest with a mobile laser scanner by making use of a unique study site setup. We scanned forest stands (1) from the ground only and (2) from the ground and from above by using a crane. We also examined the occlusion effect by scanning in the summer (leaf-on) and in the winter (leaf-off). Especially at the canopy level of the forest stands, occlusion was very pronounced, and we were able to quantify its impact in more detail. Occlusion was not as noticeable as expected for crown-related variables but, on average, resulted in smaller values for tree height in particular. Between the species, the total tree height underestimation for spruce was more pronounced than that for beech. At the stand level, significant information was lost in the canopy area when scanning from the ground alone. This information shortage is reflected in the relative point counts, the Clark–Evans index and the box dimension. Increasing the voxel size can compensate for this loss of information but comes with the trade-off of losing details in the point clouds. From our analysis, we conclude that the voxelization of point clouds prior to the extraction of stand or tree measurements with a voxel size of at least 20 cm is appropriate to reduce occlusion effects while still providing a high level of detail. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
10. Predicting Tree-Related Microhabitats by Multisensor Close-Range Remote Sensing Structural Parameters for the Selection of Retention Elements.
- Author
-
Frey, Julian, Asbeck, Thomas, and Bauhus, Jürgen
- Subjects
REMOTE sensing ,ECOLOGICAL niche ,FOREST biodiversity ,BIODIVERSITY conservation ,OPTICAL scanners ,DRONE aircraft ,PHYTOGEOGRAPHY ,PLANT cells & tissues - Abstract
The retention of structural elements such as habitat trees in forests managed for timber production is essential for fulfilling the objectives of biodiversity conservation. This paper seeks to predict tree-related microhabitats (TreMs) by close-range remote sensing parameters. TreMs, such as cavities or crown deadwood, are an established tool to quantify the suitability of habitat trees for biodiversity conservation. The aim to predict TreMs based on remote sensing (RS) parameters is supposed to assist a more objective and efficient selection of retention elements. The RS parameters were collected by the use of terrestrial laser scanning as well as unmanned aerial vehicles structure from motion point cloud generation to provide a 3D distribution of plant tissue. Data was recorded on 135 1-ha plots in Germany. Statistical models were used to test the influence of 28 RS predictors, which described TreM richness (R
2 : 0.31) and abundance (R2 : 0.31) in moderate precision and described a deviance of 44% for the abundance and 38% for richness of TreMs. Our results indicate that multiple RS techniques can achieve moderate predictions of TreM occurrence. This method allows a more efficient and objective selection of retention elements such as habitat trees that are keystone features for biodiversity conservation, even if it cannot be considered a full replacement of TreM inventories due to the moderate statistical relationship at this stage. [ABSTRACT FROM AUTHOR]- Published
- 2020
- Full Text
- View/download PDF
11. Lidar-Imagery Fusion Reveals Rapid Coastal Forest Loss in Delaware Bay Consistent with Marsh Migration.
- Author
-
Powell, Elisabeth B., Laurent, Kari A. St., and Dubayah, Ralph
- Subjects
COASTAL forests ,MARSHES ,SALT marshes ,FOREST declines ,ABSOLUTE sea level change ,FOREST conversion ,ECOSYSTEMS ,INTERTIDAL zonation - Abstract
Tidal wetland ecosystems and their vegetation communities are broadly controlled by tidal range and inundation frequency. Sea-level rise combined with episodic flooding events are causing shifts in thresholds of vegetation species which reconstructs the plant zonation of the coastal landscape. More frequent inundation events in the upland forest are causing the forest to convert into tidal marshes, and what is left behind are swaths of dead-standing trees along the marsh–forest boundary. Upland forest dieback has been well documented in the mid-Atlantic; however, reliable methods to accurately identify this dieback over large scales are still being developed. Here, we use multitemporal Lidar and imagery from the National Agricultural Imagery Program to classify areas of forest loss in the coastal regions of Delaware. We found that 1197 ± 405 hectares of forest transitioned to non-forest over nine years, and these losses were likely driven by major coastal storms and severe drought during the study period. In addition, we report decreases in Lidar-derived canopy height in forest loss areas, suggesting forest structure changes associated with the conversion from forest to marsh. Our results highlight the potential value of integrating Lidar-derived metrics to determine specific forest characteristics that may help predict future marsh migration pathways. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
12. Measuring Understory Fire Effects from Space: Canopy Change in Response to Tropical Understory Fire and What This Means for Applications of GEDI to Tropical Forest Fire
- Author
-
Alyson East, Andrew Hansen, Dolors Armenteras, Patrick Jantz, and David W. Roberts
- Subjects
GEDI ,LiDAR ,understory fire ,tropical fire ,forest structure ,fire severity ,Science - Abstract
The ability to measure the ecological effects of understory fire in the Amazon on a landscape scale remains a frontier in remote sensing. The Global Ecosystem Dynamics Investigation’s (GEDI) LiDAR data have been widely suggested as a critical new tool in this field. In this paper, we use the GEDI Simulator to quantify the nuanced effects of understory fire in the Amazon, and assess the ability of on-orbit GEDI data to do the same. While numerous ecological studies have used simulated GEDI data, on-orbit constraint may limit ecological inference. This is the first study that we are aware of that directly compares methods using simulated and on-orbit GEDI data. Simulated GEDI data showed that fire effects varied nonlinearly through the canopy and then moved upward with time since burn. Given that fire effects peaked in the mid-canopy and were often on the scale of 2 to 3 m in height difference, it is unlikely that on-orbit GEDI data will have the sensitivity to detect these same changes.
- Published
- 2023
- Full Text
- View/download PDF
13. Evaluating Data Inter-Operability of Multiple UAV–LiDAR Systems for Measuring the 3D Structure of Savanna Woodland
- Author
-
Harm Bartholomeus, Kim Calders, Tim Whiteside, Louise Terryn, Sruthi M. Krishna Moorthy, Shaun R. Levick, Renée Bartolo, and Hans Verbeeck
- Subjects
UAV–LiDAR sensor comparison ,savanna woodland ,forest structure ,tree metrics ,Science - Abstract
For vegetation monitoring, it is crucial to understand which changes are caused by the measurement setup and which changes are true representations of vegetation dynamics. UAV–LiDAR offers great possibilities to measure vegetation structural parameters; however, UAV–LiDAR sensors are undergoing rapid developments, and the characteristics are expected to keep changing over the years, which will introduce data inter-operability issues. Therefore, it is important to determine whether datasets acquired by different UAV–LiDAR sensors can be interchanged and if changes through time can accurately be derived from UAV–LiDAR time series. With this study, we present insights into the magnitude of differences in derived forest metrics in savanna woodland when three different UAV–LiDAR systems are being used for data acquisition. Our findings show that all three systems can be used to derive plot characteristics such as canopy height, canopy cover, and gap fractions. However, there are clear differences between the metrics derived with different sensors, which are most apparent in the lower parts of the canopy. On an individual tree level, all UAV–LiDAR systems are able to accurately capture the tree height in a savanna woodland system, but significant differences occur when crown parameters are measured with different systems. Less precise systems result in underestimations of crown areas and crown volumes. When comparing UAV–LiDAR data of forest areas through time, it is important to be aware of these differences and ensure that data inter-operability issues do not influence the change analysis. In this paper, we want to stress that it is of utmost importance to realise this and take it into consideration when combining datasets obtained with different sensors.
- Published
- 2022
- Full Text
- View/download PDF
14. Identifying Forest Structural Types along an Aridity Gradient in Peninsular Spain: Integrating Low-Density LiDAR, Forest Inventory, and Aridity Index
- Author
-
Julián Tijerín-Triviño, Daniel Moreno-Fernández, Miguel A. Zavala, Julen Astigarraga, and Mariano García
- Subjects
aridity gradient ,forest structure ,LiDAR ,low-density ALS ,Random Forest ,regional scale ,Science - Abstract
Forest structure is a key driver of forest functional processes. The characterization of forest structure across spatiotemporal scales is essential for forest monitoring and management. LiDAR data have proven particularly useful for cost-effectively estimating forest structural attributes. This paper evaluates the ability of combined forest inventory data and low-density discrete return airborne LiDAR data to discriminate main forest structural types in the Mediterranean-temperate transition ecotone. Firstly, we used six structural variables from the Spanish National Forest Inventory (SNFI) and an aridity index in a k-medoids algorithm to define the forest structural types. These variables were calculated for 2770 SNFI plots. We identified the main species for each structural type using the SNFI. Secondly, we developed a Random Forest model to predict the spatial distribution of structural types and create wall-to-wall maps from LiDAR data. The k-medoids clustering algorithm enabled the identification of four clusters of forest structures. A total of six out of forty-one potential LiDAR metrics were utilized in our Random Forest, after evaluating their importance in the Random Forest model. Selected metrics were, in decreasing order of importance, the percentage of all returns above 2 m, mean height of the canopy profile, the difference between the 90th and 50th height percentiles, the area under the canopy curve, and the 5th and the 95th percentile of the return heights. The model yielded an overall accuracy of 64.18%. The producer’s accuracy ranged between 36.11% and 88.93%. Our results confirm the potential of this approximation for the continuous monitoring of forest structures, which is key to guiding forest management in this region.
- Published
- 2022
- Full Text
- View/download PDF
15. TomoSAR Mapping of 3D Forest Structure: Contributions of L-Band Configurations
- Author
-
Matteo Pardini, Victor Cazcarra-Bes, and Konstantinos P. Papathanassiou
- Subjects
forest structure ,synthetic aperture radar ,tomography ,L-band ,Science - Abstract
Synthetic Aperture Radar (SAR) measurements are unique for mapping forest 3D structure and its changes in time. Tomographic SAR (TomoSAR) configurations exploit this potential by reconstructing the 3D radar reflectivity. The frequency of the SAR measurements is one of the main parameters determining the information content of the reconstructed reflectivity in terms of penetration and sensitivity to the individual vegetation elements. This paper attempts to review and characterize the structural information content of L-band TomoSAR reflectivity reconstructions, and their potential to forest structure mapping. First, the challenges in the accurate TomoSAR reflectivity reconstruction of volume scatterers (which are expected to dominate at L-band) and to extract physical structure information from the reconstructed reflectivity is addressed. Then, the L-band penetration capability is directly evaluated by means of the estimation performance of the sub-canopy ground topography. The information content of the reconstructed reflectivity is then evaluated in terms of complementary structure indices. Finally, the dependency of the TomoSAR reconstruction and of its structural information to both the TomoSAR acquisition geometry and the temporal change of the reflectivity that may occur in the time between the TomoSAR measurements in repeat-pass or bistatic configurations is evaluated. The analysis is supported by experimental results obtained by processing airborne acquisitions performed over temperate forest sites close to the city of Traunstein in the south of Germany.
- Published
- 2021
- Full Text
- View/download PDF
16. Predicting Tree-Related Microhabitats by Multisensor Close-Range Remote Sensing Structural Parameters for the Selection of Retention Elements
- Author
-
Julian Frey, Thomas Asbeck, and Jürgen Bauhus
- Subjects
forest biodiversity ,tree related microhabitats ,terrestrial laser scanning ,uav ,structure from motion ,forest structure ,Science - Abstract
The retention of structural elements such as habitat trees in forests managed for timber production is essential for fulfilling the objectives of biodiversity conservation. This paper seeks to predict tree-related microhabitats (TreMs) by close-range remote sensing parameters. TreMs, such as cavities or crown deadwood, are an established tool to quantify the suitability of habitat trees for biodiversity conservation. The aim to predict TreMs based on remote sensing (RS) parameters is supposed to assist a more objective and efficient selection of retention elements. The RS parameters were collected by the use of terrestrial laser scanning as well as unmanned aerial vehicles structure from motion point cloud generation to provide a 3D distribution of plant tissue. Data was recorded on 135 1-ha plots in Germany. Statistical models were used to test the influence of 28 RS predictors, which described TreM richness (R2: 0.31) and abundance (R2: 0.31) in moderate precision and described a deviance of 44% for the abundance and 38% for richness of TreMs. Our results indicate that multiple RS techniques can achieve moderate predictions of TreM occurrence. This method allows a more efficient and objective selection of retention elements such as habitat trees that are keystone features for biodiversity conservation, even if it cannot be considered a full replacement of TreM inventories due to the moderate statistical relationship at this stage.
- Published
- 2020
- Full Text
- View/download PDF
17. Monitoring of Forest Structure Dynamics by Means of L-Band SAR Tomography
- Author
-
Victor Cazcarra-Bes, Maria Tello-Alonso, Rico Fischer, Michael Heym, and Konstantinos Papathanassiou
- Subjects
synthetic aperture radar (SAR) ,tomography ,forest structure ,forest dynamics ,horizontal forest structure ,vertical forest structure ,L-band ,compressive sensing ,Science - Abstract
Synthetic Aperture Radar Tomography (TomoSAR) allows the reconstruction of the 3D reflectivity of natural volume scatterers such as forests, thus providing an opportunity to infer structure information in 3D. In this paper, the potential of TomoSAR data at L-band to monitor temporal variations of forest structure is addressed using simulated and experimental datasets. First, 3D reflectivity profiles were extracted by means of TomoSAR reconstruction based on a Compressive Sensing (CS) approach. Next, two complementary indices for the description of horizontal and vertical forest structure were defined and estimated by means of the distribution of local maxima of the reconstructed reflectivity profiles. To assess the sensitivity and consistency of the proposed methodology, variations of these indices for different types of forest changes in simulated as well as in real scenarios were analyzed and assessed against different sources of reference data: airborne Lidar measurements, high resolution optical images, and forest inventory data. The forest structure maps obtained indicated the potential to distinguish between different forest stages and the identification of different types of forest structure changes induced by logging, natural disturbance, or forest management.
- Published
- 2017
- Full Text
- View/download PDF
18. Weak Environmental Controls of Tropical Forest Canopy Height in the Guiana Shield.
- Author
-
Goulamoussène, Youven, Bedeau, Caroline, Descroix, Laurent, Deblauwe, Vincent, Linguet, Laurent, and Hérault, Bruno
- Subjects
TROPICAL forests ,FOREST mapping ,FOREST surveys ,FOREST canopy ecology ,FOREST ecology - Abstract
Canopy height is a key variable in tropical forest functioning and for regional carbon inventories. We investigate the spatial structure of the canopy height of a tropical forest, its relationship with environmental physical covariates, and the implication for tropical forest height variation mapping. Making use of high-resolution maps of LiDAR-derived Digital Canopy Model (DCM) and environmental covariates from a Digital Elevation Model (DEM) acquired over 30,000 ha of tropical forest in French Guiana, we first show that forest canopy height is spatially correlated up to 2500 m. Forest canopy height is significantly associated with environmental variables, but the degree of correlation varies strongly with pixel resolution. On the whole, bottomland forests generally have lower canopy heights than hillslope or hilltop forests. However, this global picture is very noisy at local scale likely because of the endogenous gap-phase forest dynamic processes. Forest canopy height has been predictively mapped across a pixel resolution going from 6 m to 384 m mimicking a low resolution case of 3 points ⋅ km
-2 . Results of canopy height mapping indicated that the error for spatial model with environment effects decrease from 8.7 m to 0.91 m, depending of the pixel resolution. Results suggest that, outside the calibration plots, the contribution of environment in shaping the global canopy height distribution is quite limited. This prevents accurate canopy height mapping based only on environmental information, and suggests that precise canopy height maps, for local management purposes, can only be obtained with direct LiDAR monitoring. [ABSTRACT FROM AUTHOR]- Published
- 2016
- Full Text
- View/download PDF
19. Wavelet Based Analysis of TanDEM-X and LiDAR DEMs across a Tropical Vegetation Heterogeneity Gradient Driven by Fire Disturbance in Indonesia.
- Author
-
De Grandi, Elsa Carla, Mitchard, Edward, and Hoekman, Dirk
- Subjects
VEGETATION monitoring ,FIRE ecology ,WAVELETS (Mathematics) ,LIDAR ,DIGITAL elevation models ,THREE-dimensional imaging in geology - Abstract
Three-dimensional information provided by TanDEM-X interferometric phase and airborne Light Detection and Ranging (LiDAR) Digital Elevation Models (DEMs) were used to detect differences in vegetation heterogeneity through a disturbance gradient in Indonesia. The range of vegetation types developed as a consequence of fires during the 1997-1998 El Niño. Two-point statistic (wavelet variance and co-variance) was used to assess the dominant spatial frequencies associated with either topographic features or canopy structure. DEMs wavelet spectra were found to be sensitive to canopy structure at short scales (up to 8 m) but increasingly influenced by topographic structures at longer scales. Analysis also indicates that, at short scale, canopy texture is driven by the distribution of heights. Thematic class separation using the Jeffries-Matusita distance (JM) was greater when using the full wavelet signature (LiDAR: 1.29 ¤ JM ¤ 1.39; TanDEM-X: 1.18 ¤ JM ¤ 1.39) compared to using each decomposition scale individually (LiDAR: 0.1 ¤ JM ¤ 1.26; TanDEM-X: 0.1 ¤ JM ¤ 1.1). In some cases, separability with TanDEM-X was similar to the higher resolution LiDAR. The study highlights the potential of 3D information from TanDEM-X and LiDAR DEMs to explore vegetation disturbance history when analyzed using two-point statistics. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
20. TomoSAR Mapping of 3D Forest Structure: Contributions of L-Band Configurations
- Author
-
Konstantinos Papathanassiou, Victor Cazcarra-Bes, and Matteo Pardini
- Subjects
Synthetic aperture radar ,L band ,010504 meteorology & atmospheric sciences ,Science ,0211 other engineering and technologies ,02 engineering and technology ,tomography ,01 natural sciences ,L-band ,Bistatic radar ,3D radar ,General Earth and Planetary Sciences ,Forest structure ,Temporal change ,Sensitivity (control systems) ,Tomography ,Geology ,021101 geological & geomatics engineering ,0105 earth and related environmental sciences ,Remote sensing ,forest structure ,synthetic aperture radar - Abstract
Synthetic Aperture Radar (SAR) measurements are unique for mapping forest 3D structure and its changes in time. Tomographic SAR (TomoSAR) configurations exploit this potential by reconstructing the 3D radar reflectivity. The frequency of the SAR measurements is one of the main parameters determining the information content of the reconstructed reflectivity in terms of penetration and sensitivity to the individual vegetation elements. This paper attempts to review and characterize the structural information content of L-band TomoSAR reflectivity reconstructions, and their potential to forest structure mapping. First, the challenges in the accurate TomoSAR reflectivity reconstruction of volume scatterers (which are expected to dominate at L-band) and to extract physical structure information from the reconstructed reflectivity is addressed. Then, the L-band penetration capability is directly evaluated by means of the estimation performance of the sub-canopy ground topography. The information content of the reconstructed reflectivity is then evaluated in terms of complementary structure indices. Finally, the dependency of the TomoSAR reconstruction and of its structural information to both the TomoSAR acquisition geometry and the temporal change of the reflectivity that may occur in the time between the TomoSAR measurements in repeat-pass or bistatic configurations is evaluated. The analysis is supported by experimental results obtained by processing airborne acquisitions performed over temperate forest sites close to the city of Traunstein in the south of Germany.
- Published
- 2021
21. LiCHy: The CAF’s LiDAR, CCD and Hyperspectral Integrated Airborne Observation System
- Author
-
Yong Pang, Zengyuan Li, Hongbo Ju, Hao Lu, Wen Jia, Lin Si, Ying Guo, Qingwang Liu, Shiming Li, Luxia Liu, Binbin Xie, Bingxiang Tan, and Yuanyong Dian
- Subjects
airborne remote sensing ,forest structure ,waveform LiDAR ,CCD ,imaging spectroscopy ,multi-angle ,Science - Abstract
We describe the design, implementation and performance of a novel airborne system, which integrates commercial waveform LiDAR, CCD (Charge-Coupled Device) camera and hyperspectral sensors into a common platform system. CAF’s (The Chinese Academy of Forestry) LiCHy (LiDAR, CCD and Hyperspectral) Airborne Observation System is a unique system that permits simultaneous measurements of vegetation vertical structure, horizontal pattern, and foliar spectra from different view angles at very high spatial resolution (~1 m) on a wide range of airborne platforms. The horizontal geo-location accuracy of LiDAR and CCD is about 0.5 m, with LiDAR vertical resolution and accuracy 0.15 m and 0.3 m, respectively. The geo-location accuracy of hyperspectral image is within 2 pixels for nadir view observations and 5–7 pixels for large off-nadir observations of 55° with multi-angle modular when comparing to LiDAR product. The complementary nature of LiCHy’s sensors makes it an effective and comprehensive system for forest inventory, change detection, biodiversity monitoring, carbon accounting and ecosystem service evaluation. The LiCHy system has acquired more than 8000 km2 of data over typical forests across China. These data are being used to investigate potential LiDAR and optical remote sensing applications in forest management, forest carbon accounting, biodiversity evaluation, and to aid in the development of similar satellite configurations. This paper describes the integration of the LiCHy system, the instrument performance and data processing workflow. We also demonstrate LiCHy’s data characteristics, current coverage, and potential vegetation applications.
- Published
- 2016
- Full Text
- View/download PDF
22. Impacts of Spatial Variability on Aboveground Biomass Estimation from L-Band Radar in a Temperate Forest.
- Author
-
Robinson, Chelsea, Saatchi, Sassan, Neumann, Maxim, and Gillespie, Thomas
- Subjects
BIOMASS estimation ,FOREST biomass ,POLARIMETRIC remote sensing ,RADAR ,BACKSCATTERING - Abstract
Estimation of forest aboveground biomass (AGB) has become one of the main challenges of remote sensing science for global observation of carbon storage and changes in the past few decades. We examine the impact of plot size at different spatial resolutions, incidence angles, and polarizations on the forest biomass estimation using L-band polarimetric Synthetic Aperture Radar data acquired by NASA's Unmanned Aerial Vehicle Synthetic Aperture Radar (UAVSAR) airborne system. Field inventory data from 32 1.0 ha plots (AGB < 200 Mg ha
-1 ) in approximately even-aged forests in a temperate to boreal transitional region in the state of Maine were divided into subplots at four different spatial scales (0.0625 ha, 0.25 ha, 0.5 ha, and 1.0 ha) to quantify aboveground biomass variations. The results showed a large variability in aboveground biomass at smaller plot size (0.0625 ha). The variability decreased substantially at larger plot sizes (>0.5 ha), suggesting a stability of field-estimated biomass at scales of about 1.0 ha. UAVSAR backscatter was linked to the field estimates of aboveground biomass to develop parametric equations based on polarized returns to accurately map biomass over the entire radar image. Radar backscatter values at all three polarizations (HH, VV, HV) were positively correlated with field aboveground biomass at all four spatial scales, with the highest correlation at the 1.0 ha scale. Among polarizations, the cross-polarized HV had the highest sensitivity to field estimated aboveground biomass (R2 = 0.68). Algorithms were developed that combined three radar backscatter polarizations (HH, HV, and VV) to estimate aboveground biomass at the four spatial scales. The predicted aboveground biomass from these algorithms resulted in decreasing estimation error as the pixel size increased, with the best results at the 1 ha scale with an R2 of 0.67 (p < 0.0001), and an overall RMSE of 44 Mg∙ha-1 . For AGB < 150 Mg∙ha-1 , the error reduced to 23 Mg∙ha-1 (±15%), suggesting an improved AGB prediction below the L-band sensitivity range to biomass. Results also showed larger bias in aboveground biomass estimation from radar at smaller scales that improved at larger spatial scales of 1.0 ha with underestimation of -3.62 Mg∙ha-1 over the entire biomass range. [ABSTRACT FROM AUTHOR]- Published
- 2013
- Full Text
- View/download PDF
23. Influence of Surface Topography on ICESat/GLAS Forest Height Estimation and Waveform Shape.
- Author
-
Hilbert, Claudia and Schmullius, Christiane
- Subjects
MOUNTAINS ,OPTICAL radar ,REMOTE sensing ,CATHODE ray oscillographs - Abstract
This study explores ICESat/GLAS waveform data in Thuringian Forest, a low mountain range located in central Germany. Lidar remote sensing has been proven to directly derive tree height as a key variable of forest structure. The GLAS signal is, however, very sensitive to surface topography because of the large footprint size. This study therefore focuses on forests in a mountainous area to assess the potential of GLAS data to derive terrain elevation and tree height. The work enhances the empirical knowledge about the interaction between GLAS waveform and landscape structure regarding a special temperate forest site with a complex terrain. An algorithm to retrieve tree height directly from GLA01 waveform data is proposed and compared to an approach using GLA14 Gaussian parameters. The results revealed that GLAS height estimates were accurate for areas with a slope up to 10° whereas waveforms of areas above 15° were problematic. Slopes between 10-15° have been found to be a critical crossover. Further, different waveform shape types and landscape structure classes were developed as a new possibility to explore the waveform in its whole structure. Based on the detailed analysis of some waveform examples, it could be demonstrated that the waveform shape can be regarded as a product of the complex interaction between surface and canopy structure. Consequently, there is a great variety of waveform shapes which in turn considerably hampers GLAS tree height extraction in areas with steep slopes and complex forest conditions. [ABSTRACT FROM AUTHOR]
- Published
- 2012
- Full Text
- View/download PDF
24. Forest Structural Estimates Derived Using a Practical, Open-Source Lidar-Processing Workflow.
- Author
-
St. Peter, Joseph, Drake, Jason, Medley, Paul, and Ibeanusi, Victor
- Subjects
WORKFLOW ,AIRBORNE lasers ,SPECIFIC gravity ,REMOTE-sensing images ,DISTRIBUTED computing ,LIDAR ,CLOUD computing - Abstract
Lidar data is increasingly available over large spatial extents and can also be combined with satellite imagery to provide detailed vegetation structural metrics. To fully realize the benefits of lidar data, practical and scalable processing workflows are needed. In this study, we used the lidR R software package, a custom forest metrics function in R, and a distributed cloud computing environment to process 11 TB of airborne lidar data covering ~22,900 km
2 into 28 height, cover, and density metrics. We combined these lidar outputs with field plot data to model basal area, trees per acre, and quadratic mean diameter. We compared lidar-only models with models informed by spectral imagery only, and lidar and spectral imagery together. We found that lidar models outperformed spectral imagery models for all three metrics, and combination models performed slightly better than lidar models in two of the three metrics. One lidar variable, the relative density of low midstory canopy, was selected in all lidar and combination models, demonstrating the importance of midstory forest structure in the study area. In general, this open-source lidar-processing workflow provides a practical, scalable option for estimating structure over large, forested landscapes. The methodology and systems used for this study offered us the capability to process large quantities of lidar data into useful forest structure metrics in compressed timeframes. [ABSTRACT FROM AUTHOR]- Published
- 2021
- Full Text
- View/download PDF
25. Mapping Mangrove Zonation Changes in Senegal with Landsat Imagery Using an OBIA Approach Combined with Linear Spectral Unmixing.
- Author
-
Lombard, Florent, Andrieu, Julien, Carrascosa, Francisco Javier Mesas, and Mesa, Andrés Felipe Ríos
- Subjects
MANGROVE plants ,VEGETATION mapping ,FOREST monitoring ,AVICENNIA ,RHIZOPHORA ,FOREST management - Abstract
The mangrove areas in Senegal have fluctuated considerably over the last few decades, and it is therefore important to monitor the evolution of forest cover in order to orient and optimise forestry policies. This study presents a method for mapping plant formations to monitor and study changes in zonation within the mangroves of Senegal. Using Landsat ETM+ and Landsat 8 OLI images merged to a 15-m resolution with a pansharpening method, a processing chain that combines an OBIA approach and linear spectral unmixing was developed to detect changes in mangrove zonation through a diachronic analysis. The accuracy of the discriminations was evaluated with kappa indices, which were 0.8 for the Saloum delta and 0.83 for the Casamance estuary. Over the last 20 years, the mangroves of Senegal have increased in surface area. However, the dynamics of zonation differ between the two main mangrove hydrosystems of Senegal. In Casamance, a colonisation process is underway. In the Saloum, Rhizophora mangle is undergoing a process of densification in mangroves and appears to reproduce well in both regions. Furthermore, this study confirms, on a regional scale, observations in the literature noting the lack of Avicennia germinans reproduction on a local scale. In the long term, these regeneration gaps may prevent the mangrove from colonising the upper tidal zones in the Saloum. Therefore, it would be appropriate to redirect conservation policies towards reforestation efforts in the Saloum rather than in Casamance and to focus these actions on the perpetuation of Avicennia germinans rather than Rhizophora mangle, which has no difficulty in reproducing. From this perspective, it is necessary to gain a more in-depth understanding of the specific factors that promote the success of Avicennia germinans seeding. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
26. Evaluation of P-Band SAR Tomography for Mapping Tropical Forest Vertical Backscatter and Tree Height.
- Author
-
Ramachandran, Naveen, Saatchi, Sassan, Tebaldini, Stefano, d'Alessandro, Mauro Mariotti, Dikshit, Onkar, and Buddenbaum, Henning
- Subjects
TROPICAL forests ,TREE height ,FOREST mapping ,MULTIPLE Signal Classification ,POLARIMETRY ,FOREST monitoring ,SYNTHETIC aperture radar ,BACKSCATTERING - Abstract
Low-frequency tomographic synthetic aperture radar (TomoSAR) techniques provide an opportunity for quantifying the dynamics of dense tropical forest vertical structures. Here, we compare the performance of different TomoSAR processing, Back-projection (BP), Capon beamforming (CB), and MUltiple SIgnal Classification (MUSIC), and compensation techniques for estimating forest height (FH) and forest vertical profile from the backscattered echoes. The study also examines how polarimetric measurements in linear, compact, hybrid, and dual circular modes influence parameter estimation. The tomographic analysis was carried out using P-band data acquired over the Paracou study site in French Guiana, and the quantitative evaluation was performed using LiDAR-based canopy height measurements taken during the 2009 TropiSAR campaign. Our results show that the relative root mean squared error (RMSE) of height was less than 10%, with negligible systematic errors across the range, with Capon and MUSIC performing better for height estimates. Radiometric compensation, such as slope correction, does not improve tree height estimation. Further, we compare and analyze the impact of the compensation approach on forest vertical profiles and tomographic metrics and the integrated backscattered power. It is observed that radiometric compensation increases the backscatter values of the vertical profile with a slight shift in local maxima of the canopy layer for both the Capon and the MUSIC estimators. Our results suggest that applying the proper processing and compensation techniques on P-band TomoSAR observations from space will allow the monitoring of forest vertical structure and biomass dynamics. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
27. Determination of Structural Characteristics of Old-Growth Forest in Ukraine Using Spaceborne LiDAR.
- Author
-
Spracklen, Ben, Spracklen, Dominick V., and Rizzoli, Paola
- Subjects
OPTICAL radar ,AIRBORNE lasers ,LIDAR ,RANDOM forest algorithms - Abstract
A forest's structure changes as it progresses through developmental stages from establishment to old-growth forest. Therefore, the vertical structure of old-growth forests will differ from that of younger, managed forests. Free, publicly available spaceborne Laser Range and Detection (LiDAR) data designed for the determination of forest structure has recently become available through NASA's General Ecosystem and Development Investigation (GEDI). We use this data to investigate the structure of some of the largest remaining old-growth forests in Europe in the Ukrainian Carpathian Mountains. We downloaded 18489 cloud-free shots in the old-growth forest (OGF) and 20398 shots in adjacent non-OGF areas during leaf-on, snow-free conditions. We found significant differences between OGF and non-OGF over a wide range of structural metrics. OGF was significantly more open, with a more complex vertical structure and thicker ground-layer vegetation. We used Random Forest classification on a range of GEDI-derived metrics to classify OGF shapefiles with an accuracy of 73%. Our work demonstrates the use of spaceborne LiDAR for the identification of old-growth forests. [ABSTRACT FROM AUTHOR]
- Published
- 2021
- Full Text
- View/download PDF
28. Highly Local Model Calibration with a New GEDI LiDAR Asset on Google Earth Engine Reduces Landsat Forest Height Signal Saturation.
- Author
-
Healey, Sean P., Yang, Zhiqiang, Gorelick, Noel, and Ilyushchenko, Simon
- Subjects
LIDAR ,CALIBRATION ,ECOSYSTEM dynamics ,ALTITUDES ,OPTICAL sensors - Abstract
While Landsat has proved to be effective for monitoring many elements of forest condition and change, the platform has well-documented limitations in measuring forest structure, the vertical distribution of the canopy. This is important because structure determines several key ecosystem functions, including: carbon storage; habitat suitability; and timber volume. Canopy structure is directly measured by LiDAR, and it should be possible to train Landsat structure models at a highly local scale with the dense, global sample of full waveform LiDAR observations collected by NASA's Global Ecosystem Dynamics Investigation (GEDI). Local models are expected to perform better because: (a) such models may take advantage of localized correlations between structure and canopy surface reflectance; and (b) to the extent that models revert to the mean of the calibration data due to a lack of discrimination, local models will revert to a more representative mean. We tested Landsat-based relative height predictions using a new GEDI asset on Google Earth Engine, described here. Mean prediction error declined by 23% and important prediction biases at the extremes of the range of canopy height dropped as model calibration became more local, minimizing forest structure signal saturation commonly associated with Landsat and other passive optical sensors. Our results suggest that Landsat-based maps of structural variables such as height and biomass may substantially benefit from the kind of local calibration that GEDI's dense sample of LiDAR data supports. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
29. How Can Remote Sensing Help Monitor Tropical Moist Forest Degradation?—A Systematic Review.
- Author
-
Dupuis, Chloé, Lejeune, Philippe, Michez, Adrien, and Fayolle, Adeline
- Subjects
FOREST degradation ,TROPICAL forests ,REMOTE sensing ,FOREST resilience ,META-analysis ,ARTIFICIAL satellites - Abstract
In the context of the climate and biodiversity crisis facing our planet, tropical forests playing a key role in global carbon flux and containing over half of Earth's species are important to preserve. They are today threatened by deforestation but also by forest degradation, which is more difficult to study. Here, we performed a systematic review of studies on moist tropical forest degradation using remote sensing and fitting indicators of forest resilience to perturbations. Geographical repartition, spatial extent and temporal evolution were analyzed. Indicators of compositional, structural and regeneration criteria were noted as well as remote sensing indices and metrics used. Tropical moist forest degradation is not extensively studied especially in the Congo basin and in southeast Asia. Forest structure (i.e., canopy gaps, fragmentation and biomass) is the most widely and easily measured criteria with remote sensing, while composition and regeneration are more difficult to characterize. Mixing LiDAR/Radar and optical data shows good potential as well as very high-resolution satellite data. The awaited GEDI and BIOMASS satellites data will fill the actual gap to a large extent and provide accurate structural information. LiDAR and unmanned aerial vehicles (UAVs) form a good bridge between field and satellite data. While the performance of the LiDAR is no longer to be demonstrated, particular attention should be brought to the UAV that shows great potential and could be more easily used by local communities and stakeholders. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
30. Simulation of Ku-Band Profile Radar Waveform by Extending Radiosity Applicable to Porous Individual Objects (RAPID2) Model.
- Author
-
Du, Kai, Huang, Huaguo, and Zhu, Yuyi
- Subjects
OPTICAL radar ,SYNTHETIC aperture radar ,LEAF area index ,RADAR ,FOREST thinning ,FOREST canopies ,SPACE-based radar ,PLANT biomass ,FOREST biomass - Abstract
Similar to light detection and ranging (lidar), profile radar can detect forest vertical structure directly. Recently, the first Ku-band profile radar system designed for forest applications, called Tomoradar, has been developed and evaluated in boreal forest. However, the physical relationships between the waveform and forest structure parameters such as height, leaf area index (LAI), and aboveground biomass are still unclear, which limits later forestry applications. Therefore, it is necessary to develop a theoretical model to simulate the relationship and interpret the mechanism behind. In this study, we extend the Radiosity Applicable to Porous IndiviDual objects (RAPID2) model to simulate the profile radar waveform of forest stands. The basic assumption is that the scattering functions of major components within forest canopy are similar between profile radar and the side-looking radar implemented in RAPID2, except several modifications. These modifications of RAPID2 mainly include: (a) changing the observation angle from side-looking to nadir-looking; (b) enhancing the ground specular scattering in normal direction using Fresnel coefficient; (c) increasing the timing resolution and recording waveform. The simulated waveforms were evaluated using two plots of Tomoradar waveforms at co- and cross- polarizations, which are collected in thin and dense forest stands respectively. There is a good agreement (R
2 ≥ 0.80) between the model results and experimental waveforms in HH and HV polarization modes and two forest scenes. After validation, the extended RAPID2 model was used to explore the sensitivity of the stem density, single tree LAI, crown shape, and twig density on the penetration depth in the Ku-band. Results indicate that the backscattering of the profile radar penetrates deeper than previous studies of synthetic aperture radar (SAR), and the penetration depth tends to be several meters in Ku-band. With the increasing of the needle and twig density in the microwave propagation path, the penetration depth decreases gradually. It is worth noting that variation of stem density seems to have the least effect on the penetration depth, when there is no overlapping between the single tree crowns. [ABSTRACT FROM AUTHOR]- Published
- 2020
- Full Text
- View/download PDF
31. LiCHy: The CAF’s LiDAR, CCD and Hyperspectral Integrated Airborne Observation System
- Author
-
Zengyuan Li, Binbin Xie, Hongbo Ju, Shiming Li, Lin Si, Yuanyong Dian, Luxia Liu, Ying Guo, Wen Jia, Bingxiang Tan, Hao Lu, Yong Pang, and Qingwang Liu
- Subjects
Data processing ,Forest inventory ,010504 meteorology & atmospheric sciences ,Pixel ,Remote sensing application ,0211 other engineering and technologies ,multi-angle ,Hyperspectral imaging ,02 engineering and technology ,imaging spectroscopy ,01 natural sciences ,Lidar ,airborne remote sensing ,Nadir ,General Earth and Planetary Sciences ,Environmental science ,lcsh:Q ,waveform LiDAR ,lcsh:Science ,Change detection ,021101 geological & geomatics engineering ,0105 earth and related environmental sciences ,Remote sensing ,forest structure ,CCD - Abstract
We describe the design, implementation and performance of a novel airborne system, which integrates commercial waveform LiDAR, CCD (Charge-Coupled Device) camera and hyperspectral sensors into a common platform system. CAF’s (The Chinese Academy of Forestry) LiCHy (LiDAR, CCD and Hyperspectral) Airborne Observation System is a unique system that permits simultaneous measurements of vegetation vertical structure, horizontal pattern, and foliar spectra from different view angles at very high spatial resolution (~1 m) on a wide range of airborne platforms. The horizontal geo-location accuracy of LiDAR and CCD is about 0.5 m, with LiDAR vertical resolution and accuracy 0.15 m and 0.3 m, respectively. The geo-location accuracy of hyperspectral image is within 2 pixels for nadir view observations and 5–7 pixels for large off-nadir observations of 55° with multi-angle modular when comparing to LiDAR product. The complementary nature of LiCHy’s sensors makes it an effective and comprehensive system for forest inventory, change detection, biodiversity monitoring, carbon accounting and ecosystem service evaluation. The LiCHy system has acquired more than 8000 km2 of data over typical forests across China. These data are being used to investigate potential LiDAR and optical remote sensing applications in forest management, forest carbon accounting, biodiversity evaluation, and to aid in the development of similar satellite configurations. This paper describes the integration of the LiCHy system, the instrument performance and data processing workflow. We also demonstrate LiCHy’s data characteristics, current coverage, and potential vegetation applications.
- Published
- 2016
32. Comparison of LiDAR and Digital Aerial Photogrammetry for Characterizing Canopy Openings in the Boreal Forest of Northern Alberta.
- Author
-
Dietmaier, Annette, McDermid, Gregory J., Rahman, Mir Mustafizur, Linke, Julia, and Ludwig, Ralf
- Subjects
FOREST canopy gaps ,DIGITAL photogrammetry ,AERIAL photogrammetry ,TAIGA ecology ,TAIGAS ,LIDAR ,FOREST canopies - Abstract
Forest canopy openings are a key element of forest structure, influencing a host of ecological dynamics. Light detection and ranging (LiDAR) is the de-facto standard for measuring three-dimensional forest structure, but digital aerial photogrammetry (DAP) has emerged as a viable and economical alternative. We compared the performance of LiDAR and DAP data for characterizing canopy openings and no-openings across a 1-km
2 expanse of boreal forest in northern Alberta, Canada. Structural openings in canopy cover were delineated using three canopy height model (CHM) alternatives, from (i) LiDAR, (ii) DAP, and (iii) a LiDAR/DAP hybrid. From a point-based detectability perspective, the LiDAR CHM produced the best results (87% overall accuracy), followed by the hybrid and DAP models (47% and 46%, respectively). The hybrid and DAP CHMs experienced large errors of omission (9–53%), particularly with small openings up to 20m2 , which are an important element of boreal forest structure. By missing these, DAP and hybrid datasets substantially under-reported the total area of openings across our site (152,470 m2 and 159,848 m2 , respectively) compared to LiDAR (245,920 m2 ). Our results illustrate DAP's sensitivity to occlusions, mismatched tie points, and other optical challenges inherent to using structure-from-motion workflows in complex forest scenes. These under-documented constraints currently limit the technology's capacity to fully characterize canopy structure. For now, we recommend that operational use of DAP in forests be limited to mapping large canopy openings, and area-based attributes that are well-documented in the literature. [ABSTRACT FROM AUTHOR]- Published
- 2019
- Full Text
- View/download PDF
33. Advances in the Derivation of Northeast Siberian Forest Metrics Using High-Resolution UAV-Based Photogrammetric Point Clouds.
- Author
-
Brieger, Frederic, Herzschuh, Ulrike, Pestryakova, Luidmila A., Bookhagen, Bodo, Zakharov, Evgenii S., and Kruse, Stefan
- Subjects
TIMBERLINE ,POINT cloud ,STANDARD deviations ,CROWNS (Botany) ,CARBON cycle ,VEGETATION dynamics - Abstract
Forest structure is a crucial component in the assessment of whether a forest is likely to act as a carbon sink under changing climate. Detailed 3D structural information about the tundra–taiga ecotone of Siberia is mostly missing and still underrepresented in current research due to the remoteness and restricted accessibility. Field based, high-resolution remote sensing can provide important knowledge for the understanding of vegetation properties and dynamics. In this study, we test the applicability of consumer-grade Unmanned Aerial Vehicles (UAVs) for rapid calculation of stand metrics in treeline forests. We reconstructed high-resolution photogrammetric point clouds and derived canopy height models for 10 study sites from NE Chukotka and SW Yakutia. Subsequently, we detected individual tree tops using a variable-window size local maximum filter and applied a marker-controlled watershed segmentation for the delineation of tree crowns. With this, we successfully detected 67.1% of the validation individuals. Simple linear regressions of observed and detected metrics show a better correlation (R
2 ) and lower relative root mean square percentage error (RMSE%) for tree heights (mean R2 = 0.77, mean RMSE% = 18.46%) than for crown diameters (mean R2 = 0.46, mean RMSE% = 24.9%). The comparison between detected and observed tree height distributions revealed that our tree detection method was unable to representatively identify trees <2 m. Our results show that plot sizes for vegetation surveys in the tundra–taiga ecotone should be adapted to the forest structure and have a radius of >15–20 m to capture homogeneous and representative forest stands. Additionally, we identify sources of omission and commission errors and give recommendations for their mitigation. In summary, the efficiency of the used method depends on the complexity of the forest's stand structure. [ABSTRACT FROM AUTHOR]- Published
- 2019
- Full Text
- View/download PDF
34. Metrics of Lidar-Derived 3D Vegetation Structure Reveal Contrasting Effects of Horizontal and Vertical Forest Heterogeneity on Bird Species Richness.
- Author
-
Carrasco, Luis, Giam, Xingli, Papeş, Monica, and Sheldon, Kimberly S.
- Subjects
BIODIVERSITY ,LIDAR ,ACCURACY ,FORESTS & forestry ,FOREST canopy gaps - Abstract
The structural heterogeneity of vegetation is a key factor for explaining animal diversity patterns at a local scale. Improvements in airborne light detection and ranging (lidar) technologies have enabled researchers to study forest 3D structure with increasing accuracy. Most structure–animal diversity work has focused on structural metrics derived from lidar returns from canopy and terrain features. Here, we built new lidar structural metrics based on the Leaf Area Density (LAD) at each vegetation height layer, and used these metrics to study how different aspects of forest structural heterogeneity explain variation in bird species richness. Our goals were to test: (1) whether LAD-based metrics better explained bird species richness compared to metrics based on the top of the canopy; and (2) if different aspects of structural heterogeneity had diverse effects on bird richness. We used discrete lidar data together with 61 breeding landbird points provided by the National Ecological Observatory Network at five forest sites of the eastern US. We used the lidar metrics as predictors of bird species richness and analyzed the shape of the response curves against each predictor. Metrics based on LAD measurements had better explanatory power (43% of variance explained) than those based on the variation of canopy heights (32% of variance explained). Dividing the forest plots into smaller grids allowed us to study the within-plot horizontal variation of the vertical heterogeneity, as well as to analyze how the vegetation density is horizontally distributed at each height layer. Bird species richness increased with horizontal heterogeneity, while vertical heterogeneity had negative effects, contrary to previous research. The increasing capabilities of lidar will allow researchers to characterize forest structure with higher detail. Our findings highlight the need for structure–animal diversity studies to incorporate metrics that are able to capture different aspects of forest 3D heterogeneity. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
35. Long-Term Impacts of Selective Logging on Amazon Forest Dynamics from Multi-Temporal Airborne LiDAR.
- Author
-
Rangel Pinagé, Ekena, Keller, Michael, Duffy, Paul, Longo, Marcos, dos-Santos, Maiza Nara, and Morton, Douglas C.
- Subjects
FORESTS & forestry ,LIDAR ,LOGGING ,FOREST management ,PLANT canopies - Abstract
Forest degradation is common in tropical landscapes, but estimates of the extent and duration of degradation impacts are highly uncertain. In particular, selective logging is a form of forest degradation that alters canopy structure and function, with persistent ecological impacts following forest harvest. In this study, we employed airborne laser scanning in 2012 and 2014 to estimate three-dimensional changes in the forest canopy and understory structure and aboveground biomass following reduced-impact selective logging in a site in Eastern Amazon. Also, we developed a binary classification model to distinguish intact versus logged forests. We found that canopy gap frequency was significantly higher in logged versus intact forests even after 8 years (the time span of our study). In contrast, the understory of logged areas could not be distinguished from the understory of intact forests after 6–7 years of logging activities. Measuring new gap formation between LiDAR acquisitions in 2012 and 2014, we showed rates 2 to 7 times higher in logged areas compared to intact forests. New gaps were spatially clumped with 76 to 89% of new gaps within 5 m of prior logging damage. The biomass dynamics in areas logged between the two LiDAR acquisitions was clearly detected with an average estimated loss of −4.14 ± 0.76 MgC ha
−1 y−1 . In areas recovering from logging prior to the first acquisition, we estimated biomass gains close to zero. Together, our findings unravel the magnitude and duration of delayed impacts of selective logging in forest structural attributes, confirm the high potential of airborne LiDAR multitemporal data to characterize forest degradation in the tropics, and present a novel approach to forest classification using LiDAR data. [ABSTRACT FROM AUTHOR]- Published
- 2019
- Full Text
- View/download PDF
36. Performance of Laser-Based Electronic Devices for Structural Analysis of Amazonian Terra-Firme Forests.
- Author
-
Pereira, Iokanam Sales, Mendonça do Nascimento, Henrique E., Boni Vicari, Matheus, Disney, Mathias, DeLucia, Evan H., Domingues, Tomas, Kruijt, Bart, Lapola, David, Meir, Patrick, Norby, Richard J., Ometto, Jean P.H.B., Quesada, Carlos A., Rammig, Anja, and Hofhansl, Florian
- Subjects
CARBON sequestration in forests ,BIOMASS ,OPTICAL radar ,ELECTRONIC equipment ,SCANNING systems - Abstract
Tropical vegetation biomass represents a key component of the carbon stored in global forest ecosystems. Estimates of aboveground biomass commonly rely on measurements of tree size (diameter and height) and then indirectly relate, via allometric relationships and wood density, to biomass sampled from a relatively small number of harvested and weighed trees. Recently, however, novel in situ remote sensing techniques have been proposed, which may provide nondestructive alternative approaches to derive biomass estimates. Nonetheless, we still lack knowledge of the measurement uncertainties, as both the calibration and validation of estimates using different techniques and instruments requires consistent assessment of the underlying errors. To that end, we investigate different approaches estimating the tropical aboveground biomass in situ. We quantify the total and systematic errors among measurements obtained from terrestrial light detection and ranging (LiDAR), hypsometer-based trigonometry, and traditional forest inventory. We show that laser-based estimates of aboveground biomass are in good agreement (<10% measurement uncertainty) with traditional measurements. However, relative uncertainties vary among the allometric equations based on the vegetation parameters used for parameterization. We report the error metrics for measurements of tree diameter and tree height and discuss the consequences for estimated biomass. Despite methodological differences detected in this study, we conclude that laser-based electronic devices could complement conventional measurement techniques, thereby potentially improving estimates of tropical vegetation biomass. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
37. Mapping the Mangrove Forest Canopy Using Spectral Unmixing of Very High Spatial Resolution Satellite Images.
- Author
-
Taureau, Florent, Robin, Marc, Proisy, Christophe, Fromard, François, Imbert, Daniel, and Debaine, Françoise
- Subjects
MANGROVE forests ,MANGROVE management ,FOREST mapping ,ENVIRONMENTAL mapping ,HIGH resolution imaging ,REMOTE-sensing images ,HEMISPHERICAL photography - Abstract
Despite the low tree diversity and scarcity of the understory vegetation, the high morphological plasticity of mangrove trees induces, at the stand level, a very large variability of forest structures that need to be mapped for assessing the functioning of such complex ecosystems. Fully constrained linear spectral unmixing (FCLSU) of very high spatial resolution (VHSR) multispectral images was tested to fine-scale map mangrove zonations in terms of horizontal variation of forest structure. The study was carried out on three Pleiades-1A satellite images covering French island territories located in the Atlantic, Indian, and Pacific Oceans, namely Guadeloupe, Mayotte, and New Caledonia archipelagos. In each image, FCLSU was trained from the delineation of areas exclusively related to four components including either pure vegetation, soil (ferns included), water, or shadows. It was then applied to the whole mangrove cover imaged for each island and yielded the respective contributions of those four components for each image pixel. On the forest stand scale, the results interestingly indicated a close correlation between FCLSU-derived vegetation fractions and canopy closure estimated from hemispherical photographs (R
2 = 0.95) and a weak relation with the Normalized Difference Vegetation Index (R2 = 0.29). Classification of these fractions also offered the opportunity to detect and map horizontal patterns of mangrove structure in a given site. K-means classifications of fraction indeed showed a global view of mangrove structure organization in the three sites, complementary to the outputs obtained from spectral data analysis. Our findings suggest that the pixel intensity decomposition applied to VHSR multispectral satellite images can be a simple but valuable approach for (i) mangrove canopy monitoring and (ii) mangrove forest structure analysis in the perspective of assessing mangrove dynamics and productivity. As with Lidar-based surveys, these potential new mapping capabilities deserve further physically based interpretation of sunlight scattering mechanisms within forest canopy. [ABSTRACT FROM AUTHOR]- Published
- 2019
- Full Text
- View/download PDF
38. Estimation of Above Ground Biomass in a Tropical Mountain Forest in Southern Ecuador Using Airborne LiDAR Data.
- Author
-
González-Jaramillo, Víctor, Fries, Andreas, Zeilinger, Jörg, Homeier, Jürgen, Paladines-Benitez, Jhoana, and Bendix, Jörg
- Subjects
MOUNTAIN forests ,LIDAR ,TOPOGRAPHY ,FIELD plotting (Electronic circuits) ,WATERSHEDS ,REMOTE sensing - Abstract
A reliable estimation of Above Ground Biomass (AGB) in Tropical Mountain Forest (TMF) is still complicated, due to fast-changing climate and topographic conditions, which modifies the forest structure within fine scales. The variations in vertical and horizontal forest structure are hardly detectable by small field plots, especially in natural TMF due to the high tree diversity and the inaccessibility of remote areas. Therefore, the present approach used remotely sensed data from a Light Detection and Ranging (LiDAR) sensor in combination with field measurements to estimate AGB accurately for a catchment in the Andes of south-eastern Ecuador. From the LiDAR data, information about horizontal and vertical structure of the TMF could be derived and the vegetation at tree level classified, differentiated between the prevailing forest types (ravine forest, ridge forest and Elfin Forest). Furthermore, topographical variables (Topographic Position Index, TPI; Morphometric Protection Index, MPI) were calculated by means of the high-resolution LiDAR data to analyse the AGB distribution within the catchment. The field measurements included different tree parameters of the species present in the plots, which were used to determine the local mean Wood Density (WD) as well as the specific height-diameter relationship to calculate AGB, applying regional scale modelling at tree level. The results confirmed that field plot measurements alone cannot capture completely the forest structure in TMF but in combination with high resolution LiDAR data, applying a classification at tree level, the AGB amount (Mg ha
−1 ) and its distribution in the entire catchment could be estimated adequately (model accuracy at tree level: R2 > 0.91). It was found that the AGB distribution is strongly related to ridges and depressions (TPI) and to the protection of the site (MPI), because high AGB was also detected at higher elevations (up to 196.6 Mg ha−1 , above 2700 m), if the site is situated in depressions (ravine forest) and protected by the surrounding terrain. In general, highest AGB is stored in the protected ravine TMF parts, also at higher elevations, which could only be detected by means of the remote sensed data in high resolution, because most of these areas are inaccessible. Other vegetation units, present in the study catchment (pasture and subpáramo) do not contain large AGB stocks, which underlines the importance of intact natural forest stands. [ABSTRACT FROM AUTHOR]- Published
- 2018
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.