Search

Abstract: While software-defined radars can switch their transmitted waveform on the go, they cannot transmit all waveforms at the same time, meaning they must balance the advantages and drawbacks of each configuration. Here, we propose theoretically and demonstrate experimentally the universal radar, which can apply the desired waveform in the post-processing stage after the physical measurement has been performed. This method also allows using a single measurement of a scene to design and test any other radar in complex scenarios without having to take it to the field. The method is based on post-processing the frequency response measured by a synthetically broadband stepped-frequency continuous wave radar, such as a vector network analyzer. An algorithm for overcoming distortions due to moving targets is derived as well. This approach not only provides an ultra-wideband software-only defined radar, but it also enables the acquired data from any measured site to be used for the design and analysis of almost any other future radar system, significantly cutting the time and cost of new developments. The method suggests the creation of radar raw data repositories that can be shared across diversely different radar platforms. [ABSTRACT FROM AUTHOR]

In this paper, to track maneuvering unmanned surface vehicles (USVs) in scenarios with clutter, we propose a novel method based on the probabilistic data association (PDA) algorithm and Rao-Blackwellized particle filter (RBPF) algorithm, and we further improve the tracking performance by Max-Q criterion-based waveform selection. This work develops a maneuvering target model in the context of clutter, integrating linear and nonlinear states as well as observations with false alarms. In order to jointly tackle the mixed-state tracking problem, the PDA algorithm is integrated into the RBPF framework. This allows it to be used with the complex nonlinear and linear hybrid system and helps to minimize the state dimensions of conventional particle filtering (PF). Additionally, by utilizing Q-learning principles, we provide a Max-Q-based criterion to select the waveform parameters, which guarantees low measurement errors and efficiently handles measurement uncertainties. Our simulation results show that the PDA-RBPF algorithm, which has a more appropriate tracking mechanism, produces results that are more accurate than those of the EKF or PF algorithms alone. Furthermore, the RMSE derived by the Max-Q-based criterion is smaller and more robust than that of other selection methods, as well as yielding a fixed waveform. Our proposed mechanism, which combines the concepts of PDA-RBPF and Max-Q waveform selection, performs well in target tracking tasks and exhibits relatively good performance over some existing ones. [ABSTRACT FROM AUTHOR]

Joint transceiver beamforming is a fundamental and crucial research task in the field of signal processing. Despite extensive efforts made in recent years, the joint transceiver beamforming of frequency diverse array (FDA)-based multiple-input and multiple-output (MIMO) radar has received relatively less attention and is confronted with some tricky challenges, such as range–angle decoupling and the interaction between multiple performance metrics. In this paper, we initially derive the generalized ambiguity function of the FDA-MIMO radar to explore the intrinsic correlation between its waveform design and resolution. Following that, the joint beamforming optimization is formulated as a nonconvex bivariate quadratic programming problem (NBQP) with the aim of maximizing the Signal-to-Interference-Noise Ratio (SINR) of the FDA-MIMO radar system. Building upon this, we introduce an innovative alternating manifold optimization with nested iteration (AMO-NI) algorithm to address the NBQP. By incorporating manifold optimization into iterative updates of transmit waveform and receiving filter, the AMO-NI algorithm considers the interdependencies among the optimization variables. The algorithm efficiently and expeditiously finds global optimum solutions within a finite number of iterations. Compared with other methods, our approach yields a superior beampattern and higher SINR. [ABSTRACT FROM AUTHOR]

A high-frequency surface wave radar (HFSWR) is the only sensor that provides inexpensive surveillance for up to 200 nautical miles (NM) of the exclusive economic zone in the 3–5 MHz band. However, because of its long wavelength, its angular resolution is low. Multiple-input multiple-output (MIMO) technology is an attractive method to improve angular resolution. This paper proposes MIMO waveforms and their processing that can be used in HFSWR systems. This dual modulation method applies linear frequency modulation to each pulse and orthogonal polyphase codes for a few consecutive pulses to enable MIMO processing. The proposed method can effectively remove the correlation of mutual interference and exhibits excellent performance in removing multiple-time-around echoes. [ABSTRACT FROM AUTHOR]

The conventional back projection (BP) algorithm is an accurate time-domain algorithm widely used for multiple-input multiple-output (MIMO) radar imaging, owing to its independence of antenna array configuration. The time-delay curve correction back projection (TCC-BP) algorithm greatly reduces the computational complexity of BP but suffers from spatial-variant correction, sidelobe interference and background noise due to the use of coherent superposition of echo time-delay curves. In this article, a residual attention U-Net-based (RAU-Net) MIMO radar imaging method that adapts complex noisy scenarios with spatial variation and sidelobe interference is proposed. On the basis of the U-Net underlying structure, we develop the RAU-Net with two modules: a residual unit with identity mapping and a dual attention module to obtain resolution spatial-variant correction and denoising on real-world MIMO radar images. The network realizes MIMO radar imaging based on the TCC-BP algorithm and substantially reduces the total computational time of the BP algorithm on the basis of improving the imaging resolution and denoising capability. Extensive experiments on the simulated and measured data demonstrate that the proposed method outperforms both the traditional methods and learning-imaging methods in terms of spatial-variant correction, denoising and computational complexity. [ABSTRACT FROM AUTHOR]