Search

In this paper, we demonstrate the capabilities of Pleiades-1a imagery for very high resolution (VHR) crop yield estimation by utilizing the predictor variables from the horizontal-spectral information, through Normalized Difference Vegetation Indices (NDVI), and the vertical-volumetric crop characteristics, through the derivation of Crop Canopy Models (CCMs), from the stereo imaging capacity of the satellite. CCMs captured by Unmanned Aerial Vehicles are widely used in precision farming applications, but they are not suitable for the mapping of large or inaccessible areas. We further explore the spatiotemporal relationship of the CCMs and the NDVI for five observation dates during the growing season for eight selected crop fields in Germany with harvester-measured ground truth crop yield. Moreover, we explore different CCM normalization methods, as well as linear and non-linear regression algorithms, for the crop yield estimation. Overall, using the Extremely Randomized Trees regression, the combination of CCMs and NDVI achieves an R2 coefficient of determination of 0.92. [ABSTRACT FROM AUTHOR]

Nationwide and consistent information on agricultural land use forms an important basis for sustainable land management maintaining food security, (agro)biodiversity, and soil fertility, especially as German agriculture has shown high vulnerability to climate change. Sentinel-1 and Sentinel-2 satellite data of the Copernicus program offer time series with temporal, spatial, radiometric, and spectral characteristics that have great potential for mapping and monitoring agricultural crops. This paper presents an approach which synergistically uses these multispectral and Synthetic Aperture Radar (SAR) time series for the classification of 17 crop classes at 10 m spatial resolution for Germany in the year 2018. Input data for the Random Forest (RF) classification are monthly statistics of Sentinel-1 and Sentinel-2 time series. This approach reduces the amount of input data and pre-processing steps while retaining phenological information, which is crucial for crop type discrimination. For training and validation, Land Parcel Identification System (LPIS) data were available covering 15 of the 16 German Federal States. An overall map accuracy of 75.5% was achieved, with class-specific F1-scores above 80% for winter wheat, maize, sugar beet, and rapeseed. By combining optical and SAR data, overall accuracies could be increased by 6% and 9%, respectively, compared to single sensor approaches. While no increase in overall accuracy could be achieved by stratifying the classification in natural landscape regions, the class-wise accuracies for all but the cereal classes could be improved, on average, by 7%. In comparison to census data, the crop areas could be approximated well with, on average, only 1% of deviation in class-specific acreages. Using this streamlined approach, similar accuracies for the most widespread crop types as well as for smaller permanent crop classes were reached as in other Germany-wide crop type studies, indicating its potential for repeated nationwide crop type mapping. [ABSTRACT FROM AUTHOR]

One-third of Germany's land surface area is covered by forest (around 11.4 million hectares), and thus, it characterizes the landscape. The forest is a habitat for a large number of animal and plant species, a source of raw materials, important for climate protection, and a well-being refuge for people, to name just a few of its many functions. During the annual forest condition surveys, the crown condition of German forests is assessed on the basis of field samples at fixed locations, as the crown condition of forest trees is considered an important indicator of their vitality. Since the start of the surveys in 1984, the mean crown defoliation of all tree species has increased, now averaging about 25% for all tree species. Additionally, it shows a strong rise in the rate of dieback. In 2019, the most significant changes were observed. Due to the drastic changes in recent years, efforts are being made to assess the situation of the forest using different remote sensing methods. There are now a number of freely available products provided to the public, and more will follow as a result of numerous projects in the context of earth-observation (EO)-based monitoring and mapping of the forests in Germany. In 2020, the situation regarding the use of remote sensing for the German forest was already investigated in more detail. However, these results no longer reflect the current situation. The changes of the last 3 years are the content of this publication. For this study, 84 citable research publications were thoroughly analyzed and compared with the situation in 2020. As a major result, we found a shift in the research focus towards disturbance monitoring and a tendency to cover larger areas, including national-scale studies. In addition to the review of the scientific literature, we also reviewed current research projects and related products. In congruence to the recent developments in terms of publications in scientific journals, these projects and products reflect the need for comprehensive, timely, large-area, and complementary EO-based information around forests expressed in multiple political programs. With this review, we provide an update of previous work and link it to current research activities. We conclude that there are still gaps between the information needs of forest managers who usually rely on information from field perspectives and the EO-based information products. [ABSTRACT FROM AUTHOR]

Precision agriculture relies on understanding crop growth dynamics and plant responses to short-term changes in abiotic factors. In this technical note, we present and discuss a technical approach for cost-effective, non-invasive, time-lapse crop monitoring that automates the process of deriving further plant parameters, such as biomass, from 3D object information obtained via stereo images in the red, green, and blue (RGB) color space. The novelty of our approach lies in the automated workflow, which includes a reliable automated data pipeline for 3D point cloud reconstruction from dynamic scenes of RGB images with high spatio-temporal resolution. The setup is based on a permanent rigid and calibrated stereo camera installation and was tested over an entire growing season of winter barley at the Global Change Experimental Facility (GCEF) in Bad Lauchstädt, Germany. For this study, radiometrically aligned image pairs were captured several times per day from 3 November 2021 to 28 June 2022. We performed image preselection using a random forest (RF) classifier with a prediction accuracy of 94.2% to eliminate unsuitable, e.g., shadowed, images in advance and obtained 3D object information for 86 records of the time series using the 4D processing option of the Agisoft Metashape software package, achieving mean standard deviations (STDs) of 17.3–30.4 mm. Finally, we determined vegetation heights by calculating cloud-to-cloud (C2C) distances between a reference point cloud, computed at the beginning of the time-lapse observation, and the respective point clouds measured in succession with an absolute error of 24.9–35.6 mm in depth direction. The calculated growth rates derived from RGB stereo images match the corresponding reference measurements, demonstrating the adequacy of our method in monitoring geometric plant traits, such as vegetation heights and growth spurts during the stand development using automated workflows. [ABSTRACT FROM AUTHOR]

Frequency-domain electromagnetic induction (FDEMI) methods are frequently used in non-invasive, area-wise mapping of the subsurface electromagnetic soil properties. A crucial part of data analysis is the geophysical inversion of the data, resulting in either conductivity and/or magnetic susceptibility subsurface distributions. We present a novel 1D stochastic optimization approach that combines dimension-adapting reversible jump Markov chain Monte Carlo (MCMC) with artificial bee colony (ABC) optimization for geophysical inversion, with specific application to frequency-domain electromagnetic induction (FDEMI) data. Several solution models of simplified model geometry and a variable number of model knots, which are found by the inversion method, are used to create re-sampled resulting average models. We present synthetic test inversions using conductivity models based on 14 direct-push (DP) EC logs from Greece, Italy, and Germany, as well as field data applications using multi-coil FDEMI devices from three sites in Azerbaijan and Germany. These examples show that the method can effectively lead to solutions that resemble the known DP input models or image reasonable stratigraphic and archaeological features in the field data. Neighboring 1D solutions on field data examples show high coherence along profiles even though each 1D inversion is independently handled. The computational effort for one 1D inversion is less than 120,000 forward calculations, which is much less than usually needed in MCMC inversions, whereas the resulting models show more plausible solutions due to the dimension-adapting properties of the inversion method. [ABSTRACT FROM AUTHOR]

Over the past two decades, and particularly since 2018, Central Europe has experienced several droughts with strong impacts on ecosystems and food production. It is expected that under accelerating climate change, droughts and resulting vegetation and ecosystem stress will further increase. Against this background, there is a need for techniques and datasets that allow for monitoring of the timing, extent and effects of droughts. Vegetation indices (VIs) based on satellite Earth observation (EO) can be used to directly assess vegetation stress over large areas. Here, we use a MODIS Enhanced Vegetation Index (EVI) time series to analyze and characterize the vegetation stress on Germany's croplands and grasslands that has occurred since 2000. A special focus is put on the years from 2018 to 2022, an extraordinary 5-year period characterized by a high frequency of droughts and heat waves. The study reveals strong variations in agricultural drought patterns during the past major drought years in Germany (such as 2003 or 2018), as well as large regional differences in climate-related vegetation stress. The northern parts of Germany showed a higher tendency to be affected by drought effects, particularly after 2018. Further, correlation analyses showed a strong relationship between annual yields of maize, potatoes and winter wheat and previous vegetation stress, where the timing of strongest relationships could be related to crop-specific development stages. Our results support the potential of VI time series for robustly monitoring and predicting effects of climate-related vegetation development and agricultural yields. [ABSTRACT FROM AUTHOR]

Nighttime lights are routinely used as a proxy for economic activity when official statistics are unavailable and are increasingly applied to study the effects of shocks or policy interventions at small geographic scales. The implicit assumption is that the ability of nighttime lights to pick up changes in GDP does not depend on local characteristics of the region under investigation or the scale of aggregation. This study uses panel data on regional GDP growth from six countries, and nighttime lights from the Defense Meteorological Satellite Program (DMSP) to investigate potential nonlinearities and measurement errors in the light production function. Our results for high statistical capacity countries (the United States and Germany) show that nightlights are significantly less responsive to changes in GDP at higher baseline level of GDP, higher population densities, and for agricultural GDP. We provide evidence that these nonlinearities are too large to be caused by differences in measurement errors across regions. We find similar but noisier relationships in other high-income countries (Italy and Spain) and emerging economies (Brazil and China). We also present results for different aggregation schemes and find that the overall relationship, including the nonlinearity, is stable across regions of different shapes and sizes but becomes noisier when regions become few and large. These findings have important implications for studies using nighttime lights to evaluate the economic effects of shocks or policy interventions. On average, nighttime lights pick up changes in GDP across many different levels of aggregation, down to relatively small geographies. However, the nonlinearity we document in this paper implies that some studies may fail to detect policy-relevant effects in places where lights react little to changes in economic activity or they may mistakenly attribute this heterogeneity to the treatment effect of their independent variable of interest. [ABSTRACT FROM AUTHOR]

Many analyses of the perturbed ionospheric D-region and its influence on the propagation of ground-based and satellite signals are based on data obtained in ionospheric remote sensing by very low/low frequency (VLF/LF) signals. One of the most significant causes of errors in these analyses is the lack of data related to the analysed area and time period preceding the considered perturbation. In this paper, we examine the influence of the estimation of the quiet ionosphere parameters on the determination of the electron density (Ne) and total electron content in the D-region (TECD) during the influence of a solar X-ray flare. We present a new procedure in which parameters describing the quiet ionosphere are calculated based on observations of the analysed area by a VLF/LF signal at the observed time. The developed procedure is an upgrade of the quiet ionospheric D-region (QIonDR) model that allows for a more precise analysis of the D-region intensively perturbed by a solar X-ray flare. The presented procedure is applied to data obtained in ionospheric remote sensing by the DHO signal emitted in Germany and received in Serbia during 30 solar X-ray flares. We give analytical expressions for the dependencies of the analysed parameters on the X-ray flux maximum at the times of the X-ray flux maximum and the most intense D-region perturbation. The results show that the obtained Ne and TECD are larger than in the cases when the usual constant values of the quiet ionosphere parameters are used. [ABSTRACT FROM AUTHOR]

Accurate detection and delineation of individual trees and their crowns in dense forest environments are essential for forest management and ecological applications. This study explores the potential of combining leaf-off and leaf-on structure from motion (SfM) data products from unoccupied aerial vehicles (UAVs) equipped with RGB cameras. The main objective was to develop a reliable method for precise tree stem detection and crown delineation in dense deciduous forests, demonstrated at a structurally diverse old-growth forest in the Hainich National Park, Germany. Stem positions were extracted from the leaf-off point cloud by a clustering algorithm. The accuracy of the derived stem co-ordinates and the overall UAV-SfM point cloud were assessed separately, considering different tree types. Extracted tree stems were used as markers for individual tree crown delineation (ITCD) through a region growing algorithm on the leaf-on data. Stem positioning showed high precision values (0.867). Including leaf-off stem positions enhanced the crown delineation, but crown delineations in dense forest canopies remain challenging. Both the number of stems and crowns were underestimated, suggesting that the number of overstory trees in dense forests tends to be higher than commonly estimated in remote sensing approaches. In general, UAV-SfM point clouds prove to be a cost-effective and accurate alternative to LiDAR data for tree stem detection. The combined datasets provide valuable insights into forest structure, enabling a more comprehensive understanding of the canopy, stems, and forest floor, thus facilitating more reliable forest parameter extraction. [ABSTRACT FROM AUTHOR]

Spatiotemporally accurate estimates of crop traits are essential for both scientific modeling and practical decision making in sustainable agricultural management. Besides efficient and concise methods to derive these traits, site- and crop-specific reference data are needed to develop and validate retrieval methods. To address this shortcoming, this study first includes the establishment of 'MISPEL', a comprehensive spectral library (SpecLib) containing hyperspectral measurements and reference data for six key traits of ten widely grown crops. Secondly, crop-specific statistical leaf area index (LAI) models for winter wheat are developed based on a hyperspectral (MISPELFR) and a simulated Sentinel-2 (MISPELS2) SpecLib applying four nonparametric methods. Finally, an independent Sentinel-2 model evaluation at the DEMMIN test site in Germany is conducted, including a comparison with the commonly used SNAP-LAI product. To date, MISPEL comprises a set of 1411 spectra of ten crops and more than 6800 associated reference measurements. Cross-validations of winter wheat LAI models revealed that Elastic-net generalized linear model (GLMNET) and Gaussian process (GP) regressions outperformed partial least squares (PLS) and random forest (RF) regressions, showing RSQ values up to 0.86 and a minimal NRMSE of 0.21 using MISPELFR. GLMNET and GP models based on MISPELS2 further outperformed SNAP-based LAI estimates derived for the external validation site. Thus, it is concluded that the presented SpecLib 'MISPEL' and applied methodology have a very high potential for deriving diverse crop traits of multiple crops in view of most recent and future multi-, super-, and hyperspectral satellite missions. [ABSTRACT FROM AUTHOR]

The increasing availability and variety of global satellite products and the rapid development of new algorithms has provided great potential to generate a new level of data with different spatial, temporal, and spectral resolutions. However, the ability of these synthetic spatiotemporal datasets to accurately map and monitor our planet on a field or regional scale remains underexplored. This study aimed to support future research efforts in estimating crop yields by identifying the optimal spatial (10 m, 30 m, or 250 m) and temporal (8 or 16 days) resolutions on a regional scale. The current study explored and discussed the suitability of four different synthetic (Landsat (L)-MOD13Q1 (30 m, 8 and 16 days) and Sentinel-2 (S)-MOD13Q1 (10 m, 8 and 16 days)) and two real (MOD13Q1 (250 m, 8 and 16 days)) NDVI products combined separately to two widely used crop growth models (CGMs) (World Food Studies (WOFOST), and the semi-empiric Light Use Efficiency approach (LUE)) for winter wheat (WW) and oil seed rape (OSR) yield forecasts in Bavaria (70,550 km2) for the year 2019. For WW and OSR, the synthetic products' high spatial and temporal resolution resulted in higher yield accuracies using LUE and WOFOST. The observations of high temporal resolution (8-day) products of both S-MOD13Q1 and L-MOD13Q1 played a significant role in accurately measuring the yield of WW and OSR. For example, L- and S-MOD13Q1 resulted in an R2 = 0.82 and 0.85, RMSE = 5.46 and 5.01 dt/ha for WW, R2 = 0.89 and 0.82, and RMSE = 2.23 and 2.11 dt/ha for OSR using the LUE model, respectively. Similarly, for the 8- and 16-day products, the simple LUE model (R2 = 0.77 and relative RMSE (RRMSE) = 8.17%) required fewer input parameters to simulate crop yield and was highly accurate, reliable, and more precise than the complex WOFOST model (R2 = 0.66 and RRMSE = 11.35%) with higher input parameters. Conclusively, both S-MOD13Q1 and L-MOD13Q1, in combination with LUE, were more prominent for predicting crop yields on a regional scale than the 16-day products; however, L-MOD13Q1 was advantageous for generating and exploring the long-term yield time series due to the availability of Landsat data since 1982, with a maximum resolution of 30 m. In addition, this study recommended the further use of its findings for implementing and validating the long-term crop yield time series in different regions of the world. [ABSTRACT FROM AUTHOR]

Germany aims to reduce soil sealing to under 30 hectares per day by 2030 to address negative environmental impacts from the expansion of impervious surfaces. As cities adapt to climate change, spatially explicit very high-resolution information about the distribution of impervious surfaces is becoming increasingly important for urban planning and decision-making. This study proposes a method for mapping impervious surfaces in Google Earth Engine (GEE) using a data fusion approach of 0.9 m colour-infrared true orthophotos, digital elevation models, and vector data. We conducted a pixel-based random forest (RF) classification utilizing spectral indices, Grey-Level Co-occurrence Matrix texture features, and topographic features. Impervious surfaces were mapped with 0.9 m precision resulting in an Overall Accuracy of 92.31% and Kappa-Coefficient of 84.62%. To address challenges posed by high-resolution imagery, we superimposed the RF classification results with land use data from Germany's Authoritative Real Estate Cadastre Information System (ALKIS). The results show that 25.26% of the city of Wuppertal is covered by impervious surfaces coinciding with a government-funded study from 2020 based on Sentinel-2 Copernicus data that defined a proportion of 25.22% as built-up area. This demonstrates the effectiveness of our method for semi-automated mapping of impervious surfaces in GEE to support urban planning on a local to regional scale. [ABSTRACT FROM AUTHOR]

Rapid and accurate yield estimates at both field and regional levels remain the goal of sustainable agriculture and food security. Hereby, the identification of consistent and reliable methodologies providing accurate yield predictions is one of the hot topics in agricultural research. This study investigated the relationship of spatiotemporal fusion modelling using STRAFM on crop yield prediction for winter wheat (WW) and oil-seed rape (OSR) using a semi-empirical light use efficiency (LUE) model for the Free State of Bavaria (70,550 km2), Germany, from 2001 to 2019. A synthetic normalised difference vegetation index (NDVI) time series was generated and validated by fusing the high spatial resolution (30 m, 16 days) Landsat 5 Thematic Mapper (TM) (2001 to 2012), Landsat 7 Enhanced Thematic Mapper Plus (ETM+) (2012), and Landsat 8 Operational Land Imager (OLI) (2013 to 2019) with the coarse resolution of MOD13Q1 (250 m, 16 days) from 2001 to 2019. Except for some temporal periods (i.e., 2001, 2002, and 2012), the study obtained an R2 of more than 0.65 and a RMSE of less than 0.11, which proves that the Landsat 8 OLI fused products are of higher accuracy than the Landsat 5 TM products. Moreover, the accuracies of the NDVI fusion data have been found to correlate with the total number of available Landsat scenes every year (N), with a correlation coefficient (R) of +0.83 (between R2 of yearly synthetic NDVIs and N) and −0.84 (between RMSEs and N). For crop yield prediction, the synthetic NDVI time series and climate elements (such as minimum temperature, maximum temperature, relative humidity, evaporation, transpiration, and solar radiation) are inputted to the LUE model, resulting in an average R2 of 0.75 (WW) and 0.73 (OSR), and RMSEs of 4.33 dt/ha and 2.19 dt/ha. The yield prediction results prove the consistency and stability of the LUE model for yield estimation. Using the LUE model, accurate crop yield predictions were obtained for WW (R2 = 0.88) and OSR (R2 = 0.74). Lastly, the study observed a high positive correlation of R = 0.81 and R = 0.77 between the yearly R2 of synthetic accuracy and modelled yield accuracy for WW and OSR, respectively. [ABSTRACT FROM AUTHOR]

Radar data assimilation has been operational at the Deutscher Wetterdienst for several years and is essential for generating accurate precipitation forecasts. The current work attempts to further enhance the radar data assimilation by improving the latent heat nudging (LHN) scheme and by reducing the observation error (OE) caused by the representation error of the efficient modular volume radar operator (EMVORADO). First of all, a series of hindcasts for a one-month convective period over Germany are performed. Compared with radar reflectivity and satellite observations, it is found that the LHN scheme that implicitly adjusts temperature performs better, and the beam broadening effect and the choice of the scattering schemes in EMVORADO are important. Moreover, the Mie scheme with the new parameterization to reduce the brightband effect not only proves to be the best in hindcasts but also that it results in the smallest standard deviations and the shortest horizontal correlation length scales of the OE in data assimilation experiments. [ABSTRACT FROM AUTHOR]

Monitoring within-field crop variability at fine spatial and temporal resolution can assist farmers in making reliable decisions during their agricultural management; however, it traditionally involves a labor-intensive and time-consuming pointwise manual process. To the best of our knowledge, few studies conducted a comparison of Sentinel-2 with UAV data for crop monitoring in the context of precision agriculture. Therefore, prospects of crop monitoring for characterizing biophysical plant parameters and leaf nitrogen of wheat and barley crops were evaluated from a more practical viewpoint closer to agricultural routines. Multispectral UAV and Sentinel-2 imagery was collected over three dates in the season and compared with reference data collected at 20 sample points for plant leaf nitrogen (N), maximum plant height, mean plant height, leaf area index (LAI), and fresh biomass. Higher correlations of UAV data to the agronomic parameters were found on average than with Sentinel-2 data with a percentage increase of 6.3% for wheat and 22.2% for barley. In this regard, VIs calculated from spectral bands in the visible part performed worse for Sentinel-2 than for the UAV data. In addition, large-scale patterns, formed by the influence of an old riverbed on plant growth, were recognizable even in the Sentinel-2 imagery despite its much lower spatial resolution. Interestingly, also smaller features, such as the tramlines from controlled traffic farming (CTF), had an influence on the Sentinel-2 data and showed a systematic pattern that affected even semivariogram calculation. In conclusion, Sentinel-2 imagery is able to capture the same large-scale pattern as can be derived from the higher detailed UAV imagery; however, it is at the same time influenced by management-driven features such as tramlines, which cannot be accurately georeferenced. In consequence, agronomic parameters were better correlated with UAV than with Sentinel-2 data. Crop growers as well as data providers from remote sensing services may take advantage of this knowledge and we recommend the use of UAV data as it gives additional information about management-driven features. For future perspective, we would advise fusing UAV with Sentinel-2 imagery taken early in the season as it can integrate the effect of agricultural management in the subsequent absence of high spatial resolution data to help improve crop monitoring for the farmer and to reduce costs. [ABSTRACT FROM AUTHOR]

Near-surface humidity is a crucial variable in many atmospheric processes, mostly related to the development of clouds and rain. The humidity at the height of a few tens of meters above ground level is highly influenced by surface characteristics. Measuring the near-surface humidity at high resolution, where most of the humidity's sinks and sources are found, is a challenging task using classical tools. A novel approach for measuring the humidity is based on commercial microwave links (CML), which provide a large part of the cellular networks backhaul. This study focuses on employing humidity measurements with high spatio–temporal resolution in Germany. One major goal is to assess the errors and the environmental influence by comparing the CML-derived humidity to in-situ humidity measurements at weather stations and reanalysis (COSMO-Rea6) products. The method of retrieving humidity from the CML has been improved as compared to previous studies due to the use of new data at high temporal resolution. The results show a similar correlation on average and generally good agreement between both the CML retrievals and the reanalysis, and 32 weather stations near Siegen, West Germany (CML—0.84, Rea6—0.85). Higher correlations are observed for CML-derived humidity during the daytime (0.85), especially between 9–17 LT (0.87) and a maximum at 12 LT (0.90). During the night, the correlations are lower on average (0.81), with a minimum at 3 LT (0.74). These results are discussed with attention to the diurnal boundary layer (BL) height variation which has a strong effect on the BL humidity temporal profile. Further metrics including root mean square errors, mean values and standard deviations, were also calculated. [ABSTRACT FROM AUTHOR]

Deep learning (DL)—in particular convolutional neural networks (CNN)—methods are widely spread in object detection and recognition of remote sensing images. In the domain of DL, there is a need for large numbers of training samples. These samples are mostly generated based on manual identification. Identifying and labelling these objects is very time-consuming. The developed approach proposes a partially automated procedure for the sample creation and avoids manual labelling of rooftop photovoltaic (PV) systems. By combining address data of existing rooftop PV systems from the German Plant Register, the Georeferenced Address Data and the Official House Surroundings Germany, a partially automated generation of training samples is achieved. Using a selection of 100,000 automatically generated samples, a network using a RetinaNet-based architecture combining ResNet101, a feature pyramid network, a classification and a regression network is trained, applied on a large area and post-filtered by intersection with additional automatically identified locations of existing rooftop PV systems. Based on a proof-of-concept application, a second network is trained with the filtered selection of approximately 51,000 training samples. In two independent test applications using high-resolution aerial images of Saarland in Germany, buildings with PV systems are detected with a precision of at least 92.77 and a recall of 84.47. [ABSTRACT FROM AUTHOR]

The prolonged drought of recent years combined with the steadily increasing bark beetle infestation (Ips typographus) is causing enormous damage in Germany's spruce forests. This preliminary study investigates whether early spruce infestation by the bark beetle (green attack) can be detected using indices based on airborne spatial high-resolution (0.3 m) hyperspectral data and field spectrometer measurements. In particular, a new hyperspectral index based on airborne data has been defined and compared with other common indices for bark beetle detection. It shows a very high overall accuracy (OAA = 98.84%) when validated with field data. Field measurements and a long-term validation in a second study area serve the validation of the robustness and transferability of the index to other areas. In comparison with commonly used indices, the defined index has the ability to detect a larger proportion of infested spruces in the green attack phase (60% against 20% for commonly used indices). This index confirms the high potential of the red-edge domain to distinguish infested spruces at an early stage. Overall, our index has great potential for forest preservation strategies aimed at the detection of infested spruces in order to mitigate the outbreaks. [ABSTRACT FROM AUTHOR]

Wetland environments, with their excellent conservation conditions, provide geoarchaeological archives of past human activities. However, the subsurface soil is difficult to access due to high groundwater tables, unstable sediments, and the high cost of excavation. In this study, we present a ground-based non- and minimal-invasive prospection concept adapted to the conditions of wetlands. We investigated the Fossa Carolina in South Germany, a canal that was intended in 792/793 AD by Charlemagne to bridge the Central European Watershed. Although the resulting Carolingian banks and the fairway with wooden revetments are very imposing, archaeological traces of off-site construction activities have not been identified hitherto. Based on a geophysically surveyed intensive linear magnetic anomaly parallel to the Carolingian canal, we aimed to prove potential off-site traces of Carolingian construction activities. In this context, we built up a high-resolution cross-section using highly depth-accurate direct push sensing and ground-truthing. Our results showed the exact geometry of the canal and the former banks. Thus, the magnetic mass anomaly could be clearly located between the buried organic-rich topsoil and the Carolingian banks. The thermoluminescence dating showed that the position of the magnetic mass anomaly reflected Carolingian activities during the construction phases, specifically due to heat exposure. Moreover, we found hints of the groundwater supply to the 5-metre wide navigable fairway. [ABSTRACT FROM AUTHOR]