Search

Contrasting the X-band phased array radar (XPAR) with the conventional S-Band dual-polarization mechanical scanning radar (SMSR), the XPAR offers superior temporal and spatial resolution, enabling a more refined depiction of the internal dynamics within convective systems. While both SMSR and XPAR data are extensively used in monitoring and alerting for severe convective weather, their comparative application in numerical weather prediction through data assimilation remains a relatively unexplored area. This study harnesses the Weather Research and Forecasting Model (WRF) and its data assimilation system (WRFDA) to integrate radial velocity and reflectivity from the Guangzhou SMSR and nine XPARs across Guangdong Province. Utilizing a three-dimensional variational approach at a 1 km convective-scale grid, the assimilated data are applied to forecast a rainstorm event in the Pearl River Delta (PRD) on 6 June 2022. Through a comparative analysis of the results from assimilating SMSR and XPAR data, it was observed that the assimilation of SMSR data led to more extensive adjustments in the lower- and middle-level wind fields compared to XPAR data assimilation. This resulted in an enlarged convergence area at lower levels, prompting an overdevelopment of convective systems and an excessive concentration of internal hydrometeor particles, which in turn led to spurious precipitation forecasts. However, the sequential assimilation of both SMSR and XPAR data effectively reduced the excessive adjustments in the wind fields that were evident when only SMSR data were used. This approach diminished the generation of false echoes and enhanced the precision of quantitative precipitation forecasts. Additionally, the lower spectral width of XPAR data indicates its superior detection accuracy. Assimilating XPAR data alone yields more reasonable adjustments to the low- to middle-level wind fields, leading to the formation of small-to-medium-scale horizontal convergence lines in the lower levels of the analysis field. This enhancement significantly improves the model's forecasts of composite reflectivity and radar echoes, aligning them more closely with actual observations. Consequently, the Threat Score (TS) and Equitable Threat Score (ETS) for heavy-rain forecasts (>10 mm/h) over the next 5 h are markedly enhanced. This study underscores the necessity of incorporating XPAR data assimilation in numerical weather prediction practices and lays the groundwork for the future joint assimilation of SMSR and XPAR data. [ABSTRACT FROM AUTHOR]

This paper presents exploratory work on the use of Testing with Concept Activation Vectors (TCAV) within a concept-based explanation framework to provide the explainability of millimeter-wave (MMW) radar target recognition. Given that the radar spectrum is difficult for non-domain experts to understand visually, defining concepts for radar remains a significant challenge. In response, drawing from the visual analytical experience of experts, some basic concepts based on brightness, striping, size, and shape are adopted in this paper. However, the simplicity of basic concept definitions sometimes leads to vague correlations with recognition targets and significant variability among individuals, limiting their adaptability to specific tasks. To address these issues, this study proposes a Basic Concept-Guided Deep Embedding Clustering (BCG-DEC) method that can effectively discover task-specific composite concepts. BCG-DEC methodically analyzes the deep semantic information of radar data through four distinct stages from the perspective of concept discovery, ensuring that the concepts discovered accurately conform to the task-specific property of MMW radar target recognition. The experimental results show that the proposed method not only expands the number of concepts but also effectively solves the problem of difficulty in annotating basic concepts. In the ROD2021 MMW radar explainability experiments, the concepts proved crucial for recognizing specific categories of radar targets. [ABSTRACT FROM AUTHOR]

Efficient and effective radar emitter recognition is critical for electronic support measurement (ESM) systems. However, in complex electromagnetic environments, intercepted pulse trains generally contain substantial data noise, including spurious and missing pulses. Currently, radar emitter recognition methods utilizing traditional artificial neural networks (ANNs) like CNNs and RNNs are susceptible to data noise and require intensive computations, posing challenges to meeting the performance demands of modern ESM systems. Spiking neural networks (SNNs) exhibit stronger representational capabilities compared to traditional ANNs due to the temporal dynamics of spiking neurons and richer information encoded in precise spike timing. Furthermore, SNNs achieve higher computational efficiency by performing event-driven sparse addition calculations. In this paper, a lightweight spiking neural network is proposed by combining direct coding, leaky integrate-and-fire (LIF) neurons, and surrogate gradients to recognize radar emitters. Additionally, an improved SNN for radar emitter recognition is proposed, leveraging the local timing structure of pulses to enhance adaptability to data noise. Simulation results demonstrate the superior performance of the proposed method over existing methods. [ABSTRACT FROM AUTHOR]

Under rainy conditions, atmospheric settling particles have significant depolarization effects on radar waves and thus affect the target detection performance. This paper establishes an extended target detection model for fully polarized radar under complex rainy conditions and proposes two polarization and waveform optimization methods by taking into account the transmission effect of rainfall. If the rainfall information is known, the polarization and waveform for transmitting and receiving are optimized by maximizing the system Signal-to-Clutter/Noise Ratio (SCNR). While the rainfall information is absent, the optimal transmitting polarization and waveform are obtained by directly compensating the transmission effect from non-rainfall optimization results using fully polarized radar observation parameters. Using measured data from the T-72 tank, The experimental results verify the effectiveness and robustness of the two methods in real scenarios and 4 dB on the improvement of SCNR can be achieved. [ABSTRACT FROM AUTHOR]

In the increasingly complex electromagnetic environment, main lobe jamming significantly degrades the performance of a wideband radar system. To mitigate this issue, this paper developed a wideband main lobe jamming suppression algorithm based on a distributed array radar. Firstly, this algorithm utilizes eigen-projection matrix processing in the main array to cancel out the main lobe jamming for main lobe maintenance, and then suppresses side lobe jamming through null constraint beamforming. Subsequently, the large aperture of the full array is leveraged to form a narrow beam directed toward the main lobe interference. Finally, joint beamforming using the minimum mean square error criterion is employed. In scenarios where both main lobe jamming and side lobe jamming exist, this algorithm can adaptively cancel main lobe wideband jamming, suppress side lobe wideband jamming, and effectively control the significant loss of the desired wideband signals caused by main lobe jamming within a smaller angular range. Simulation results validate the effectiveness of the algorithm. [ABSTRACT FROM AUTHOR]

Nowadays, asteroid and comet exploration is one of the most important components of deep space exploration. Through asteroid and comet exploration missions, it is possible to reveal the history of the formation and evolution of the solar system, to understand the origin and evolution of the planets, and to improve scientific models and instruments. As a payload with the advantages of non-destructive, penetrating, and polarizing characteristics, ground-penetrating radar (GPR) has been widely used in lunar and Mars exploration, and will play an important role in planned asteroid and comet exploration missions. In this study, statistics on asteroid and comet exploration missions, scientific results, and space-based ground-penetrating radar (SB-GPR) utilization are presented for the three phases to date. According to the statistics, SB-GPR will play an important role in future Phase 2 and 3 missions. The focus of this study is on analyzing the mission flow, SB-GPR parameters, scientific objectives, and scientific results of the missions that have carried SB-GPR and those that are planned to carry SB-GPR, including the Hera, Rosetta, Castalia, and Tianwen-2 missions. On this basis, the development trends of asteroid and comet exploration missions, as well as the future development trends of SB-GPR design and signal interpretation, are discussed. [ABSTRACT FROM AUTHOR]

Abstract: While software-defined radars can switch their transmitted waveform on the go, they cannot transmit all waveforms at the same time, meaning they must balance the advantages and drawbacks of each configuration. Here, we propose theoretically and demonstrate experimentally the universal radar, which can apply the desired waveform in the post-processing stage after the physical measurement has been performed. This method also allows using a single measurement of a scene to design and test any other radar in complex scenarios without having to take it to the field. The method is based on post-processing the frequency response measured by a synthetically broadband stepped-frequency continuous wave radar, such as a vector network analyzer. An algorithm for overcoming distortions due to moving targets is derived as well. This approach not only provides an ultra-wideband software-only defined radar, but it also enables the acquired data from any measured site to be used for the design and analysis of almost any other future radar system, significantly cutting the time and cost of new developments. The method suggests the creation of radar raw data repositories that can be shared across diversely different radar platforms. [ABSTRACT FROM AUTHOR]

Battlefield surveillance radar is usually 2-D radar, which cannot realize target three-dimensional localization, leading to poor resolution for the air target in the elevation dimension. Previous researchers have used the Traditional Height Finder Radar (HFR) or multiple 2-D radar networking to estimate the target three-dimensional location. However, all of them face the problems of high cost, poor real-time performance and high requirement of space–time registration. In this paper, Reconfigurable Intelligent Surfaces (RISs) with low cost are introduced into the 2-D radar to realize the target three-dimensional localization. Taking advantage of the wide beam of 2-D radar in the elevation dimension, several Unmanned Aerial Vehicles (UAVs) carrying RISs are set in the receiving beam to form multiple auxiliary measurement channels. In addition, the traditional 2-D radar measurements combined with the auxiliary channel measurements are used to realize the target three-dimensional localization by solving a nonlinear least square problem with a convex optimization method. For the proposed RIS-assisted target three-dimensional localization problem, the Cramer–Rao Lower Bound (CRLB) is derived to measure the target localization accuracy. Simulation results verify the effectiveness of the proposed 3-D localization method, and the influences of the number, the positions and the site errors of the RISs on the localization accuracy are covered. [ABSTRACT FROM AUTHOR]

In recent years, the high-frequency hybrid sky-surface wave radar (HSSWR) has been increasingly used for target detection applications. Nevertheless, the specific bistatic system layout and the phase path disturbances induced by the ionospheric propagation channel may severely spread the sea clutter spectrum, thereby deteriorating the detection ability of the HSSWR for slow-moving targets. In this work, a novel subspace method based on the hybrid use of the amplitude and phase estimator (APES) and the orthogonal projection (OP) in the spatial–temporal domain, denoted as the APES-OP method, is proposed to suppress the spreading first-order sea clutter of the HSSWR. The distribution characteristics of targets and first-order sea clutter in the spatial–temporal domain were investigated, and a time-domain subspace signal model was adopted to describe targets perturbed by ionospheric phase path modulation. An APES filter was adopted to filter out the potential targets with a traversal approach to avoid attenuating desired signals while suppressing sea clutter. After that, sampling data from multi-channels and slow-time domains at the cell under test were employed to construct a spatial–temporal matrix, which was then utilized to obtain the sea clutter subspace by singular value decomposition. Simulation results indicate that the proposed algorithm can suppress sea clutter while retaining the target, even if the target is buried by sea clutter. The processing results of measured data further demonstrate the efficiency of the proposed algorithm. After sea clutter suppression, the target obscured by clutter can be revealed, and the signal-to-clutter ratio of the target is greatly improved. [ABSTRACT FROM AUTHOR]

Decision-level information fusion methods using radar and vision usually suffer from low target matching success rates and imprecise multi-target detection accuracy. Therefore, a robust target detection algorithm based on the fusion of frequency-modulated continuous wave (FMCW) radar and a monocular camera is proposed to address these issues in this paper. Firstly, a lane detection algorithm is used to process the image to obtain lane information. Then, two-dimensional fast Fourier transform (2D-FFT), constant false alarm rate (CFAR), and density-based spatial clustering of applications with noise (DBSCAN) are used to process the radar data. Furthermore, the YOLOv5 algorithm is used to process the image. In addition, the lane lines are utilized to filter out the interference targets from outside lanes. Finally, multi-sensor information fusion is performed for targets in the same lane. Experiments show that the balanced score of the proposed algorithm can reach 0.98, which indicates that it has low false and missed detections. Additionally, the balanced score is almost unchanged in different environments, proving that the algorithm is robust. [ABSTRACT FROM AUTHOR]

A doppler radar holds promising prospects in the field of indoor target localization. However, traditional Doppler radar systems suffer from high power consumption, large size, and noticeable radio frequency interference issues when transmitting carriers of different frequencies. Therefore, an ISABO-based (improved subtraction-average-based optimizer) target localization algorithm for a single-frequency Doppler radar is proposed in this paper. Firstly, a mathematical model for target localization is established according to the spatial geometric relationships during the target movement and the Doppler frequency-shift information in the single-frequency echo signal. Then, the optimization function is constructed with the target motion error as the optimization goal. Finally, an improved subtraction-average-based optimizer algorithm is proposed to solve the optimal parameters and realize the target positioning. The experimental results show that the proposed method can achieve centimeter-level localization accuracy with a cost-effective system structure. [ABSTRACT FROM AUTHOR]

High-velocity reentry objects suffer from plasma sheath during reentry through the atmosphere, which affects the propagation characteristics of radar signals. The existing research mainly focuses on the time-frequency characteristics of radar signals, neglecting the polarization within the geomagnetic environment. In this article, the distortion of polarization characteristics for L-band fully polarimetric radar is analyzed, and the influence of the geomagnetic field is evaluated. Based on the Appleton–Hartree formula, the refractive index of the plasma sheath considering the geomagnetic field is derived and analyzed. The error model for the polarization deflection (PD) of radar waves is then established based on the phase screen model. The magnetized plasma sheath causes the deflection of the polarization plane for the radar signal, leading to distortion in the polarization characteristics and the attenuation of the echo amplitude. Considering the typical parameters of the plasma sheath, the influences of the electron density, collision frequency, the geomagnetic field and the radar frequency are analyzed quantitatively. Specifically, the PD anomaly phenomenon is analyzed and the corresponding analytical result of radar frequency is also derived. The relationship between the geomagnetic field and the PD, as well as the attenuation, is considered to be approximately linear. The absorption attenuation is primarily influenced by collision frequency and is immune to the geomagnetic field. In addition, the increasing electron density expands them, whereas the radar frequency and the collision frequency have the opposite effect. Simulations with real SAR data from ALOS-2 demonstrate the distortions resulting from the magnetized plasma sheath on the radar echoes in an L-band fully polarimetric radar system. [ABSTRACT FROM AUTHOR]

Near-range radar imaging (NRRI) has evolved into a vital technology with diverse applications spanning fields such as remote sensing, surveillance, medical imaging and non-destructive testing. The Pseudopolar Format Matrix (PFM) has emerged as a promising technique for representing radar data in a compact and efficient manner. In this paper, we present a comprehensive PFM description of near-range radar imaging. Furthermore, this paper also explores the integration of the Fractional Fourier Transform (FrFT) with PFM for enhanced radar signal analysis. The FrFT—a powerful mathematical tool for signal processing—offers unique capabilities in analysing signals with time-frequency localization properties. By combining FrFT with PFM, we have achieved significant advancements in radar imaging, particularly in dealing with complex clutter environments and improving target detection accuracy. Meanwhile, this paper highlights the imaging matrix form of FrFT under the PFM, emphasizing the potential for addressing challenges encountered in near-range radar imaging. Finally, numerical simulation and real-world scenario measurement imaging results verify optimized accuracy and computational efficiency with the fusion of PFM and FrFT techniques, paving the way for further innovations in near-range radar imaging applications. [ABSTRACT FROM AUTHOR]

This paper presents a novel, cost-effective technique for estimating the Doppler effect in the time domain using a single pulse and subsequently leveraging the precise Doppler value to recover the radar waveform. The proposed system offers several key advantages over existing techniques, including the ability to calculate the target speed without any frequency ambiguity and the ability to detect a wide range of target speeds. These two features are not available in any existing techniques, including the conventional moving target detection (MTD) processor. To ensure improved accuracy and robust estimation, the system employs ensemble and iterative techniques by recursively and efficiently reducing the Doppler residues from the signal. Furthermore, the proposed system demonstrates effective signal recovery of a well-known bi-phase code shape at low signal-to-noise ratios in just a few iterations. The performance evaluation of the new algorithm demonstrates its practicability and its superiority over traditional radar systems. Implementation on software-defined radio (SDR) reveals that the proposed system excels in Doppler estimation and signal recovery at low SNRs, demonstrating promising results. [ABSTRACT FROM AUTHOR]

This paper presents three refinements in ground-based radar interferometer (GB-radar) measurement for bridge load testing: (1) GB-radar phase jumps were detected for the first time on bridge tower displacement monitoring, and a recovery method is presented to obtain the correct unwrapped value; (2) a precise displacement projection method considering target deformation was exploited, and a case study of the Fifth Nanjing Yangtze River Bridge (FNYRB) GB-radar campaign shows that a centimeter-level compensation can be achieved; (3) a post-construction settlement phenomenon was found during the FNYRB static load tests, characterized by 0.31 mm/min, which accumulated up to 25 mm. In addition, the dynamic monitoring capabilities of GB-radar for the bridge tower and girder were verified, highlighting its potential for bridge structural health monitoring (SHM). The insights gained from this study offer valuable recommendations for future GB-radar bridge displacement monitoring. [ABSTRACT FROM AUTHOR]

Based on the characteristic of ubiquitous radar emitting low-gain wide beam, a method of long-time coherent integration (LTCI) is required to enhance target detection capability. However, high-speed and highly maneuverable targets can cause Doppler frequency migration (DFM), range migration (RM), and velocity ambiguity (VA), severely degrading the performance of LTCI. Additionally, the number of targets is unknown and variable, and the presence of clutter further complicates the target tracking problem. To address these challenges, we propose a hybrid integration method to achieve joint detection and estimation of multiple high-speed, and highly maneuverable targets. Firstly, we compensate for first-order RM using the keystone transform (KT) and generate corresponding sub-range-Doppler (SRD) planes with different folding factors to achieve VA compensation. These SRD planes are then stitched together to form an extended range-Doppler (ERD) plane, which covers a broader velocity range. Secondly, during the track-before-detect (TBD) process, tracking is performed directly on the ERD plane. We use the sequential Monte Carlo (SMC) approximation of the probability hypothesis density (PHD) to propagate multi-target states. Additionally, we propose an amplitude-based adaptive prior distribution method and a line spread model (LSM) observation model to compensate for DFM. Since the acceleration of the target is included in the particle state, using particles to search for DFM does not increase the computational load. To address the issue of misclassifying mirror targets as real targets in the SRD plane, we propose a particle space projection method. By stacking the SRD planes to create a folding range-Doppler (FRD) space, particles are projected along the folding factor dimension, and then, the particles are clustered to eliminate the influence of the mirror targets. Finally, through simulation experiments, the superiority of the LSM for targets with acceleration was demonstrated. In comparative experiments, the proposed method showed superior performance and robustness compared to traditional methods, achieving a balance between performance and computational efficiency. Furthermore, the proposed method's capability to detect and track multiple high-speed and highly maneuverable targets was validated using actual data from a ubiquitous radar system. [ABSTRACT FROM AUTHOR]

Synthetic-aperture radar (SAR) can work in all weather conditions and at all times, and satellite-borne radar has the characteristics of short revisiting period and large imaging width. Therefore, satellite-borne synthetic-aperture radar has been widely deployed, and the SAR images have been widely used in geographic mapping, radar interpretation, ship detection, and other fields. Satellite-borne synthetic-aperture radar is also susceptible to various types of intentional or unintentional interference during the imaging process, and because the interference is a direct wave, its power is much stronger than the wave reflected by targets. As a common interference pattern, radio-frequency interference widely exists in various satellite-borne synthetic-aperture radars, which seriously deteriorates SAR image quality. In order to solve the above problems, this paper proposes a feature decomposition network to suppress interference based on regularization optimization. The contributions of this work are as follows: 1. By analyzing the performance limitations of the existing methods, this work proposes a novel regularization method for radio-frequency interference suppression tasks. From the perspective of data distribution histograms and residual components, the proposed method eliminates the variable components introduced by common regularization, greatly reduces the difficulty of data mapping, and significantly improves its robustness and performance. 2. This work proposes a feature decomposition network, where the feature decomposition module contains two parts; one part only represents the interference signal, and the other part only represents the radar signal. The neurons representing the interference signal are discarded, and the neurons representing the radar signal are used as input for the subsequent network. A cosine similarity constraint is used to separate the interference from the network as much as possible. Finally, this method is validated on the MiniSAR dataset and Sentinel-1A dataset. [ABSTRACT FROM AUTHOR]

The steep and unstable terrain found on debris-covered glaciers, rock glaciers, talus slopes, moraines and other proglacial features often make terrestrial ground-penetrating radar (GPR) surveys unsafe or cost-prohibitive. To address these challenges, this research introduces a novel approach for studying buried ice using multi-low-frequency drone-based GPR. Monostatic antennas of 50, 100, and 200 MHz were flown along a transect spanning a debris-covered glacier and an ice–debris complex at Shár Shaw Tagà (Grizzly Creek) in southwest Yukon, Canada. The drone-based results were compared to manual GPR at two locations along the transect. The two manual segments were conducted using the same radar system in a bi-static mode and included common mid-point (CMP) surveys. Overall, the drone-based radar successfully identified buried ice and enabled estimation of ice body thickness. Notably, CMP results confirmed layer characteristics and enabled depths to be measured across the entire drone-based transect. Discrimination of detail across a range of depths was made possible by comparing the three low frequencies, highlighting the possibility of using this method for future investigations of debris thickness in addition to quantifying buried ice. This study confirms the effectiveness of drone-based GPR combined with manual CMP for surveying ice beneath previously inaccessible terrain. [ABSTRACT FROM AUTHOR]

In the passive bistatic radar (PBR) system, methods exist to address the issue of detecting weak targets without being influenced by non-ideal factors from adjacent strong targets. These methods utilize the sparsity in the delay-Doppler domain of the cross ambiguity function (CAF) to detect weak targets. However, the modeling and solving of this method involve substantial memory consumption and computational complexity. To address these challenges, this paper establishes a target detection model for PBR based on batch processing of sparse representation and recovery. This model partitions the CAF into blocks, identifies blocks requiring processing based on the presence of targets, and improves the construction and utilization of the measurement matrix. This results in a reduction in the computational complexity and memory resource requirements for sparse representation and recovery, and provides favorable conditions for parallel execution of the algorithm. Experimental results indicate that the proposed approach increases the number of blocks by a factor of four, and reduces the number of real multiplications by approximately an order of magnitude. Hence, compared with the traditional approach, the proposed approach enables fast and stable detection of weak targets. [ABSTRACT FROM AUTHOR]

In practical radar applications, the diversity of wideband transmission signals presents a significant challenge for radar target recognition systems. Traditional electromagnetic (EM) simulation methods often require the point-by-point sampling of target echo signals under specific radiation sources, and this process must be repeated for different transmission signals. This results in extensive EM computations and low computational efficiency. Additionally, the physical attribute information of the target is often obscured within the simulated echoes, complicating feature extraction. To address these issues, we propose a novel method for the efficient and rapid modeling and analysis of complex target time-domain echoes based on a forward scattering center model. This method constructs an impulse response model of the target under unit impulse signal excitation, representing the inherent scattering properties of the target and remaining unaffected by changes in the radiation source. Subsequently, this model is convolved with arbitrary wideband input signals to quickly reconstruct the wideband echo signals of the target. Numerical examples validate the accuracy and effectiveness of the proposed model. This method offers several advantages: firstly, it provides high computational efficiency by quickly convolving with the input signals, thereby avoiding the extensive EM calculations required by traditional methods due to changes in the radiation source. Secondly, it achieves significant data compression; the proposed echo model only requires the model parameters to be calculated at the central frequency point, enabling the rapid reconstruction of target echo data across a wideband range and effectively reducing storage requirements. Finally, it presents clear and complete physical attributes by employing a "cause-to-effect" forward-modeling approach, where the model parameters fully represent the inherent physical properties of the target. This effectively addresses the issue of physical interpretability in optical region radar target recognition. [ABSTRACT FROM AUTHOR]

This paper presents an assessment of X-band radar's detection capability to monitor Small Garbage Islands (SGIs), i.e., floating aggregations of marine litter consisting chiefly of plastic, under changing sea states. For this purpose, two radar measurement campaigns were carried out with controlled releases at sea of SGI modules assembled in the laboratory. One campaign was carried out with a calm sea and almost no wind in order to determine the X-band radar system's detection capabilities in an ideal scenario, while the other campaign took place with rough seas and wind. An analysis of the data acquired during the campaigns confirmed that X-band radar can detect small aggregations of litter floating on the sea surface. To demonstrate the radar's ability to detect SGIs, a statistical analysis was carried out to calculate the probability of false alarm and the probability of detection for two releases at two different distances from the radar. For greater readability of this work, all of the results obtained are presented both in terms of radar intensity and in terms of the radar cross-section relating to both the targets and the clutter. Another interesting study that is presented in this article concerns the measurement of the speed of movement (drift) of the SGIs compared with the measurement of the speed of the surface currents provided at the same time by the radar. The study also identified the radar detection limits depending on the sea state and the target distance from the antenna. [ABSTRACT FROM AUTHOR]

Quantitative inversion of GPR data opens the door to precise characterization of underground environments. However, in order to make the inverse scattering problem solution easier from a computational viewpoint, simplifying assumptions are often applied, i.e., two-dimensional approximations or the consideration of idealized field probes and electromagnetic sources. These assumptions usually produce modeling errors, which can degrade the dielectric reconstruction results considerably. In this article, a processing step based on long short-term memory cells is proposed for the first time to correct the modeling error in a multiantenna GPR setting. In particular, time-domain GPR data are fed into a neural network trained with couples of finite-difference time-domain simulations, where a set of sample targets are simulated in both realistic and idealized configurations. Once trained, the neural network outputs an approximation of multiantenna GPR data as they are collected by an ideal two-dimensional measurement setup. The inversion of the processed data is then accomplished by means of a regularizing Newton-based nonlinear scheme with variable exponent Lebesgue space formulation. A numerical study has been conducted to assess the capabilities of the proposed inversion methodology. The results indicate the possibility of effectively compensating for modeling error in the considered test cases. [ABSTRACT FROM AUTHOR]

In addressing the challenges of quantitative precipitation estimation (QPE) using weather radar, the importance of enhancing the rainfall estimates for applications such as flash flood forecasting and hydropower generation management is recognized. This study employed dual-polarization weather radar data to refine the traditional Z–R relationship, which often needs higher accuracy in areas with complex meteorological phenomena. Utilizing tree-based machine learning algorithms, such as random forest and gradient boosting, this research analyzed polarimetric variables to capture the intricate patterns within the Z–R relationship. The results highlight machine learning's potential to improve the precision of precipitation estimation, especially under challenging weather conditions. Integrating meteorological insights with advanced machine learning techniques is a remarkable achievement toward a more precise and adaptable precipitation estimation method. [ABSTRACT FROM AUTHOR]

By simultaneously transmitting multiple different waveform signals, a multiple-input multiple-output (MIMO) radar possesses higher degrees of freedom and potential in many aspects compared to a traditional phased-array radar. The spatial–temporal characteristics of waveforms are the key to determining their performance. In this paper, a transmitting waveform design method based on spatial–temporal joint (STJ) optimization for a MIMO radar is proposed, where waveforms are designed not only for beam-pattern matching (BPM) but also for minimizing the autocorrelation sidelobes (ACSLs) of the spatial synthesis signals (SSSs) in the directions of interest. Firstly, the STJ model is established, where the two-step strategy and least squares method are utilized for BPM, and the L2p-Norm of the ACSL is constructed as the criterion for temporal characteristics optimization. Secondly, by transforming it into an unconstrained optimization problem about the waveform phase and using the gradient descent (GD) algorithm, the hard, non-convex, high-dimensional, nonlinear optimization problem is solved efficiently. Finally, the method's effectiveness is verified through numerical simulation. The results show that our method is suitable for both orthogonal and partial-correlation MIMO waveform designs and efficiently achieves better spatial–temporal characteristic performances simultaneously in comparison with existing methods. [ABSTRACT FROM AUTHOR]

Nowadays, it is still a great challenge to detect and locate indoor humans using a frequency-modulated continuous-wave radar accurately. Due to the interference of the indoor environment and complex objects such as green plants, the radar signal may penetrate, reflect, refract, and scatter, and the echo signals will contain noise, clutter, and multipath of different characteristics. Therefore, a method combined with comprehensive non-target signal removal and human localization is proposed to achieve position estimation of a human target. Time-variant clutter is innovatively mitigated through time accumulation using point clustering. Ghost targets are reduced according to propagation path matching. The experimental results show that the method can locate the real target human within an average error of 0.195 m in multiple complex environments with green plants, curtains, or furniture using a 77 GHz millimeter-wave radar. Meanwhile, the proposed method performs better than conventional methods. The detection probability is 81.250% when the human is behind a potted plant and is 90.286% when beside it. [ABSTRACT FROM AUTHOR]

Lake ice thickness (LIT) is a sensitive indicator of climate change, identified as a thematic variable of Lakes as an Essential Climate Variable (ECV) by the Global Climate Observing System (GCOS). Here, we present a novel and efficient analytically based retracking approach for estimating LIT from high-resolution Ku-band (13.6 GHz) synthetic-aperture radar (SAR) altimetry data. The retracker method is based on the analytical modeling of the SAR radar echoes over ice-covered lakes that show a characteristic double-peak feature attributed to the reflection of the Ku-band radar waves at the snow–ice and ice–water interfaces. The method is applied to Sentinel-6 Unfocused SAR (UFSAR) and Fully Focused SAR (FFSAR) data, with their corresponding tailored waveform model, referred to as the SAR_LIT and FFSAR_LIT retracker, respectively. We found that LIT retrievals from Sentinel-6 high-resolution SAR data at different posting rates are fully consistent with the LIT estimations obtained from thermodynamic lake ice model simulations and from low-resolution mode (LRM) Sentinel-6 and Jason-3 data over two ice seasons during the tandem phase of the two satellites, demonstrating the continuity between LRM and SAR LIT retrievals. By comparing the Sentinel-6 SAR LIT estimates to optical/radar images, we found that the Sentinel-6 LIT measurements are fully consistent with the evolution of the lake surface conditions, accurately capturing the seasonal transitions of ice formation and melt. The uncertainty in the LIT estimates obtained with Sentinel-6 UFSAR data at 20 Hz is in the order of 5 cm, meeting the GCOS requirements for LIT measurements. This uncertainty is significantly smaller, by a factor of 2 to 3 times, than the uncertainty obtained with LRM data. The FFSAR processing at 140 Hz provides even better LIT estimates, with 20% smaller uncertainties. The LIT retracker analysis performed on data at the higher posting rate (140 Hz) shows increased performance in comparison to the 20 Hz data, especially during the melt transition period, due to the increased statistics. The LIT analysis has been performed over two representative lakes, Great Slave Lake and Baker Lake (Canada), demonstrating that the results are robust and hold for lake targets that differ in terms of size, bathymetry, snow/ice properties, and seasonal evolution of LIT. The SAR LIT retrackers presented are promising tools for monitoring the inter-annual variability and trends in LIT from current and future SAR altimetry missions. [ABSTRACT FROM AUTHOR]

Leveraging weather radar technology for environmental monitoring, particularly the detection of biometeors like birds, bats, and insects, presents a significant challenge due to the dynamic nature of their behavior. Unlike hydrometeor targets, biometeor targets exhibit arbitrary changes in direction and position, which significantly alter radar wave polarization upon scattering. This study addresses this challenge by introducing a novel methodology utilizing Rwanda's C-Band Polarization Radar. Our approach exploits the capabilities of dual-polarization radar by analyzing parameters such as differential reflectivity (ZDR) and correlation coefficient (RHOHV) to derive the Depolarization Ratio (DR). While existing radar metrics offer valuable insights, they have limitations in fully capturing depolarization effects. To address this, we propose an advanced fuzzy logic algorithm (FL_DR) integrating the DR parameter. The FL_DR's performance was rigorously evaluated against a standard FL algorithm. Leveraging a substantial dataset comprising nocturnal clear air radar echoes collected during a Fall Armyworm (FAW) outbreak in maize fields from September 2020 to January 2021, the FL_DR demonstrated a notable improvement in accuracy compared to the existing FL algorithm. This improvement is evident in the Fraction of Echoes Correctly Identified (FEI), which increased from 98.42% to 98.93% for biological radar echoes and from 87.02% to 95.81% for meteorological radar echoes. This enhanced detection capability positions FL_DR as a valuable system for monitoring, identification, and warning of environmental phenomena in regions similar to tropical areas facing FAW outbreaks. Additionally, it could be tested and further refined for other migrating biological targets such as birds, insects, or bats. [ABSTRACT FROM AUTHOR]

High-frequency radars (HFRs) provide remote information on ocean surface velocity in extended coastal areas at high resolutions in space (O (km)) and time (O (h)). They directly produce radial velocities (in the radar antenna's direction) combined to provide total vector velocities in areas covered by at least two radars. HFRs are a key element in ocean observing systems, with several important environmental applications. Here, we provide an assessment of the HFR-TirLig network in the NW Mediterranean Sea, including results from the gap-filling open-boundary modal analysis (OMA) using in situ velocity data from drifters. While the network consists of three radars, only two were active during the assessment experiment, so the test also includes an area where the radial velocities from only one radar system were available. The results, including several metrics, both Eulerian and Lagrangian, and configurations, show that the network performance is very satisfactory and compares well with the previous results in the literature in terms of both the radial and total combined vector velocities where the coverage is adequate, i.e., in the area sampled by two radars. Regarding the OMA results, not only do they perform equally well in the area sampled by the two radars but they also provide results in the area covered by one radar only. Even though obviously deteriorated with respect to the case of adequate coverage, the OMA results can still provide information regarding the velocity structure and speed as well as virtual trajectories, which can be of some use in practical applications. A general discussion on the implications of the results for the potential of remote sensing velocity estimation in terms of HFR network configurations and complementing gap-filling analysis is provided. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) can detect moving targets on the ground/sea, and high-resolution imaging on the ground/sea has critical applications in both military and civilian fields. This paper attempts to use a spaceborne SAR system to detect and image moving targets in the air for the first time. Due to the high velocity of aerial targets, they usually appear as two-dimensional range and azimuth direction defocus in SAR images, and clutter will also have a profound impact on target detection. To solve the above problems, a method of detecting and focusing on a spaceborne SAR target based on a two-dimensional velocity search is proposed by combining the BP algorithm. According to the current environment of the aerial target and the number of system channels, the clutter suppression methods are set and combined with two-dimensional velocity search with different precision, the Shannon entropy under different search velocity groups is used to obtain the search velocity group closest to the actual velocity and realize the integrated processing of moving target detection–focused imaging parameter estimation. Combined with simulation data, the effectiveness of the proposed method is verified. [ABSTRACT FROM AUTHOR]

Traditional radar target detectors, which are model-driven, often suffer remarkable performance degradation in complex clutter environments due to the weakness in modeling the unpredictable clutter. Deep learning (DL) methods, which are data-driven, have been introduced into the field of radar target detection (RTD) since their intrinsic non-linear feature extraction ability can enhance the separability between targets and the clutter. However, existing DL-based detectors are unattractive since they require a large amount of independent and identically distributed (i.i.d.) training samples of target tasks and fail to be generalized to the other new tasks. Given this issue, incorporating the strategy of meta-learning, we reformulate the RTD task as a few-shot classification problem and develop the Inter-frame Contrastive Learning-Based Meta Detector (IfCMD) to generalize to the new task efficiently with only a few samples. Moreover, to further separate targets from the clutter, we equip our model with Siamese architecture and introduce the supervised contrastive loss into the proposed model to explore hard negative samples, which have the targets overwhelmed by the clutter in the Doppler domain. Experimental results on simulated data demonstrate competitive detection performance for moving targets and superior generalization ability for new tasks of the proposed method. [ABSTRACT FROM AUTHOR]

Tomographic Synthetic Aperture Radar (SAR) allows the reconstruction of the 3D radar reflectivity of forests from a large(r) number of multi-angular acquisitions. However, in most practical implementations it suffers from limited vertical resolution and/or reconstruction artefacts as the result of non-ideal acquisition setups. Polarisation Coherence Tomography (PCT) offers an alternative to traditional tomographic techniques that allow the reconstruction of the low-frequency 3D radar reflectivity components from a small(er) number of multi-angular SAR acquisitions. PCT formulates the tomographic reconstruction problem as a series expansion on a given function basis. The expansion coefficients are estimated from interferometric coherence measurements between acquisitions. In its original form, PCT uses the Legendre polynomial basis for the reconstruction of the 3D radar reflectivity. This paper investigates the use of new basis functions for the reconstruction of X-band 3D radar reflectivity of forests derived from available lidar waveforms. This approach enables an improved 3D radar reflectivity reconstruction with enhanced vertical resolution, tailored to individual forest conditions. It also allows the translation from sparse lidar waveform vertical reflectivity information into continuous vertical reflectivity estimates when combined with interferometric SAR measurements. This is especially relevant for exploring the synergy of actual missions such as GEDI and TanDEM-X. The quality of the reconstructed 3D radar reflectivity is assessed by comparing simulated InSAR coherences derived from the reconstructed 3D radar reflectivity against measured coherences at different spatial baselines. The assessment is performed and discussed for interferometric TanDEM-X acquisitions performed over two tropical Gabonese rainforest sites: Mondah and Lopé. The results demonstrate that the lidar-derived basis provides more physically realistic vertical reflectivity profiles, which also produce a smaller bias in the simulated coherence validation, compared to the conventional Legendre polynomial basis. [ABSTRACT FROM AUTHOR]

With the development of electronic warfare technology, the intelligent jammer dramatically reduces the performance of traditional radar anti-jamming methods. A key issue is how to actively adapt radar to complex electromagnetic environments and design anti-jamming strategies to deal with intelligent jammers. The space of the electromagnetic environment is dynamically changing, and the transmitting power of the jammer and frequency diversity array (FDA) radar in each frequency band is continuously adjustable. Both can learn the optimal strategy by interacting with the electromagnetic environment. Considering that the competition between the FDA radar and the jammer is a confrontation process of two agents, we find the optimal power allocation strategy for both sides by using the multi-agent deep deterministic policy gradient (MADDPG) algorithm based on multi-agent reinforcement learning (MARL). Finally, the simulation results show that the power allocation strategy of the FDA radar and the jammer can converge and effectively improve the performance of the FDA radar and the jammer in the intelligent countermeasure environment. [ABSTRACT FROM AUTHOR]

The unknown relative motions between synthetic aperture radar (SAR) and a ground moving target will lead to serious range cell migration (RCM) and Doppler frequency spread (DFS). The energy of the moving target will defocus, given the effect of the RCM and DFS. The moving target will easily produce Doppler ambiguity, due to the low pulse repetition frequency of radar, and the Doppler ambiguity complicates the corrections of the RCM and DFS. In order to address these issues, an efficient ground moving target focusing method for SAR based on scaled Fourier transform and scaled inverse Fourier transform is presented. Firstly, the operations based on the scaled Fourier transform and scaled inverse Fourier transforms are presented to focus the moving targets in consideration of Doppler ambiguity. Subsequently, in accordance with the detailed analysis of multiple target focusing, the spurious peak related to the cross term is removed. The proposed method can accurately eliminate the DFS and RCM, and the well-focused result of the moving target can be achieved under the complex Doppler ambiguity. Then, the blind speed sidelobe can be further avoided. The presented method has high computational efficiency without the step of parameter search. The simulated and measured SAR data are provided to demonstrate the effectiveness of the developed method. [ABSTRACT FROM AUTHOR]

This study explores the near-surface dispersion mechanisms of contaminants in coastal waters, leveraging a comprehensive method that includes using dye and drifters as tracers, coupled with diverse observational platforms like drones, satellites, in situ sampling, and HF radar. The aim is to deepen our understanding of surface currents' impact on contaminant dispersion, thereby improving predictive models for managing environmental incidents such as pollutant releases. Rhodamine WT dye, chosen for its significant fluorescent properties and detectability, along with drifter data, allowed us to investigate the dynamics of near-surface physical phenomena such as the Ekman current, Stokes drift, and wind-driven currents. Our research emphasizes the importance of integrating scalar tracers and Lagrangian markers in experimental designs, revealing differential dispersion behaviors due to near-surface vertical shear caused by the Ekman current and Stokes drift. During slow-current conditions, the elongation direction of the dye patch aligned well with the direction of a depth-averaged Ekman spiral, or Ekman transport. Analytical calculations of vertical shear, based on the Ekman current and Stokes drift, closely matched those derived from tracer observations. Over a 7 h experiment, the vertical diffusivity near the surface was first observed at the early stages of scalar mixing, with a value of 1.9 × 10 − 4   m 2 / s , and the horizontal eddy diffusivity of the dye patch and drifters reached the order of 1 m 2 / s at a 1000 m length scale. Particle tracking models demonstrate that while HF radar currents can effectively predict the trajectories of tracers near the surface, incorporating near-surface currents, including the Ekman current, Stokes drift, and windage, is essential for a more accurate prediction of the fate of surface floats. [ABSTRACT FROM AUTHOR]

Exploring soil organic carbon (SOC) mapping is crucial for addressing critical challenges in environmental sustainability and food security. This study evaluates the suitability of the synergistic use of multi-temporal and high-resolution radar and optical remote sensing data for SOC prediction in the Kaffrine region of Senegal, covering over 1.1 million hectares. For this purpose, various scenarios were developed: Scenario 1 (Sentinel-1 data), Scenario 2 (Sentinel-2 data), Scenario 3 (Sentinel-1 and Sentinel-2 combination), Scenario 4 (topographic features), and Scenario 5 (Sentinel-1 and -2 with topographic features). The findings from comparing three different algorithms (Random Forest (RF), XGBoost, and Support Vector Regression (SVR)) with 671 soil samples for training and 281 samples for model evaluation highlight that RF outperformed the other models across different scenarios. Moreover, using Sentinel-2 data alone yielded better results than using only Sentinel-1 data. However, combining Sentinel-1 and Sentinel-2 data (Scenario 3) further improved the performance by 6% to 11%. Including topographic features (Scenario 5) achieved the highest accuracy, reaching an R2 of 0.7, an RMSE of 0.012%, and an RPIQ of 5.754 for the RF model. Applying the RF and XGBoost models under Scenario 5 for SOC mapping showed that both models tended to predict low SOC values across the study area, which is consistent with the predominantly low SOC content observed in most of the training data. This limitation constrains the ability of ML models to capture the full range of SOC variability, particularly for less frequent, slightly higher SOC values. [ABSTRACT FROM AUTHOR]

With the number of new satellites increasing dramatically, comprehensive space surveillance is becoming increasingly important. Therefore, high-resolution inverse synthetic aperture radar (ISAR) imaging of satellites can provide an in-situ assessment of the satellites. This paper demonstrates that pseudo-noise signals can also be used for satellite imaging, in addition to classical linear frequency-modulated chirp signals. Pseudo-noise transmission signals offer the advantage of very low cross-correlation values. This, for instance, enables the possibility of a system with multiple channels transmitting instantaneously. Furthermore, it can significantly reduce signal interference with other systems operating in the same frequency spectrum, which is of particular interest for high-bandwidth, high-power systems such as satellite imaging radars. A new routine has been introduced to generate a wideband pseudo-noise signal with a peak-to-average power ratio (PAPR) similar to that of a chirp signal. This is essential for applications where the transmit signal power budget is sharply limited by the high-power amplifier. The paper presents both theoretical descriptions and analysis of the generated pseudo-noise signal as well as the results of an imaging measurement of a real space target using the introduced pseudo-noise signals. [ABSTRACT FROM AUTHOR]

For airborne radar, detecting a low–slow–small (LSS) target is a hot and challenging topic, which results from the rapidly increasing number of non-cooperative flying LSS targets becoming of widespread concern, and the low signal-to-clutter ratio (SCR) of LSS targets results in the targets being particularly easily overwhelmed by the clutter. In this paper, a novel light gradient boosting machine (LightGBM)-based LSS target detection algorithm for airborne radar is proposed. The proposed method, based on the current real-time clutter environment of the range cell to be detected, firstly designs a specific real-time space-time LSS target signal repository with special dimensions and structures. Then, the proposed method creatively designs a new fast-built real-time training feature dataset specifically for the LSS target and the current clutter, together with a series of unique data transformations, sample selection, data restructuring, feature extraction, and feature processing. Finally, the proposed method develops a unique machine learning-based LSS target detection classifier model for the designed training dataset, by fully excavating and utilizing the advantages of the ensemble decision trees-based LightGBM. Consequently, the pre-processed data in the range cell of interest are classified using the proposed algorithm, which achieves LSS target detection by evaluating the output results of the designed classifier. Compared with the traditional classical target detection methods, the proposed algorithm is capable of providing markedly superior performance for LSS target detection. With an appropriate computational time, the proposed algorithm attains the highest probability of detecting LSS targets under the low SCR. The simulation outcomes and detection results with the experimental data are employed to validate the effectiveness and merits of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Aircraft icing refers to the accumulation of ice on the surface and components of an aircraft when supercooled water droplets collide with the aircraft above freezing levels (at altitudes at which the temperature is below 0 °C), which requires vigilant monitoring to avert aviation accidents attributable to icing. In response to this imperative, the Weather Radar Center (WRC) of the Korea Meteorological Administration (KMA) has developed a real-time icing detection algorithm. We utilized 3D dual-polarimetric radar variables, 3D atmospheric variables, and aircraft icing data and statistically analyzed these variables within the icing areas determined by aircraft icing data from 2018–2022. An algorithm capable of detecting icing potential areas (icing potential) was formulated by applying these characteristics. Employing this detection algorithm enabled the classification of icing potential into three stages: precipitation, icing caution, and icing warning. The algorithm was validated, demonstrating a notable performance with a probability of detection value of 0.88. The algorithm was applied to three distinct icing cases under varying environmental conditions—frontal, stratiform, and cumuliform clouds—thereby offering real-time observable icing potential across the entire Korean Peninsula. [ABSTRACT FROM AUTHOR]

An airborne bistatic radar working in downward-looking mode confronts two major challenges for low-altitude target detection. One is range cell migration (RCM) and Doppler migration (DM) resulting from the relative motion of the radar and target. The other is the non-stationarity characteristic of clutter due to the radar configuration. To solve these problems, this paper proposes a joint implementation method based on sub-aperture processing to achieve clutter suppression and coherent maneuvering target detection. Specifically, clutter Doppler compensation and sliding window processing are carried out to realize sub-aperture space–time processing, removing the clutter non-stationarity resulting from the bistatic geometric configuration. Thus, the output matrix of clutter suppression in the sub-aperture could be obtained. Then, the elements with the same phase of this matrix are superimposed and rearranged to achieve the reconstructed 2-D range-pluse echo matrix. Next, the aperture division with respect to slow time is conducted and the RCM correction based on modified location rotation transform (MLRT) and coherent integration (CI) are realized within each sub-aperture. Finally, the matched filtering process (MFP) is applied to compensate for the RCM/DM among different sub-apertures to coherently integrate the maneuvering target energy of all sub-apertures. The simulation and measured data processing results prove the validity of the proposed method. [ABSTRACT FROM AUTHOR]

Joint transceiver beamforming is a fundamental and crucial research task in the field of signal processing. Despite extensive efforts made in recent years, the joint transceiver beamforming of frequency diverse array (FDA)-based multiple-input and multiple-output (MIMO) radar has received relatively less attention and is confronted with some tricky challenges, such as range–angle decoupling and the interaction between multiple performance metrics. In this paper, we initially derive the generalized ambiguity function of the FDA-MIMO radar to explore the intrinsic correlation between its waveform design and resolution. Following that, the joint beamforming optimization is formulated as a nonconvex bivariate quadratic programming problem (NBQP) with the aim of maximizing the Signal-to-Interference-Noise Ratio (SINR) of the FDA-MIMO radar system. Building upon this, we introduce an innovative alternating manifold optimization with nested iteration (AMO-NI) algorithm to address the NBQP. By incorporating manifold optimization into iterative updates of transmit waveform and receiving filter, the AMO-NI algorithm considers the interdependencies among the optimization variables. The algorithm efficiently and expeditiously finds global optimum solutions within a finite number of iterations. Compared with other methods, our approach yields a superior beampattern and higher SINR. [ABSTRACT FROM AUTHOR]

Ice thickness has a significant effect on the physical and biogeochemical processes of a lake, and it is an integral focus of research in the field of ice engineering. The Qinghai–Tibetan Plateau, known as the Third Pole of the world, contains numerous lakes. Compared with some information, such as the area, water level, and ice phenology of its lakes, the ice thickness of these lakes remains poorly understood. In this study, we used an unmanned aerial vehicle (UAV) with a 400/900 MHz ice-penetrating radar to detect the ice thickness of Qinghai Lake and Gahai Lake. Two observation fields were established on the western side of Qinghai Lake and Gahai Lake in January 2019 and January 2021, respectively. Based on the in situ ice thickness and the propagation time of the radar, the accuracy of the ice thickness measurements of these two non-freshwater lakes was comprehensively assessed. The results indicate that pre-processed echo images from the UAV-borne ice-penetrating radar identified non-freshwater lake ice, and we were thus able to accurately calculate the propagation time of radar waves through the ice. The average dielectric constants of Qinghai Lake and Gahai Lake were 4.3 and 4.6, respectively. This means that the speed of the radar waves that propagated through the ice of the non-freshwater lake was lower than that of the radio waves that propagated through the freshwater lake. The antenna frequency of the radar also had an impact on the accuracy of ice thickness modeling. The RMSEs were 0.034 m using the 400 MHz radar and 0.010 m using the 900 MHz radar. The radar with a higher antenna frequency was shown to provide greater accuracy in ice thickness monitoring, but the control of the UAV's altitude and speed should be addressed. [ABSTRACT FROM AUTHOR]

Rangeland ecosystems in the western United States are vulnerable to climate change, fire, and anthropogenic disturbances, yet classification of rangeland areas remains difficult due to frequently sparse vegetation canopies that increase the influence of soils and senesced vegetation, the overall abundance of senesced vegetation, heterogeneity of life forms, and limited ground-based data. The Rangeland Condition Monitoring Assessment and Projection (RCMAP) project provides fractional vegetation cover maps across western North America using Landsat imagery and artificial intelligence from 1985 to 2023 at yearly time-steps. The objectives of this case study are to apply hyperspectral data from several new data streams, including Sentinel Synthetic Aperture Radar (SAR) and Earth Surface Mineral Dust Source Investigation (EMIT), to the RCMAP model. We run a series of five tests (Landsat-base model, base + SAR, base + EMIT, base + SAR + EMIT, and base + Landsat NEXT [LNEXT] synthesized from EMIT) over a difficult-to-classify region centered in southwest Montana, USA. Our testing results indicate a clear accuracy benefit of adding SAR and EMIT data to the RCMAP model, with a 7.5% and 29% relative increase in independent accuracy (R2), respectively. The ability of SAR data to observe vegetation height allows for more accurate classification of vegetation types, whereas EMIT's continuous characterization of the spectral response boosts discriminatory power relative to multispectral data. Our spectral profile analysis reveals the enhanced classification power with EMIT is related to both the improved spectral resolution and representation of the entire domain as compared to legacy Landsat. One key finding is that legacy Landsat bands largely miss portions of the electromagnetic spectrum where separation among important rangeland targets exists, namely in the 900–1250 nm and 1500–1780 nm range. Synthesized LNEXT data include these gaps, but the reduced spectral resolution compared to EMIT results in an intermediate 18% increase in accuracy relative to the base run. Here, we show the promise of enhanced classification accuracy using EMIT data, and to a smaller extent, SAR. [ABSTRACT FROM AUTHOR]

Surface soil moisture (SSM) plays an important role in agricultural and environmental systems. With the continuous improvement in the availability of remote sensing data, satellite technology has experienced widespread development in the monitoring of large-scale SSM. Synthetic Aperture Radar (SAR) and optical remote sensing data have been extensively utilized due to their complementary advantages in this field. However, the limited information from single-band SARs or single optical remote sensing data has restricted the accuracy of SSM retrieval, posing challenges for precise SSM monitoring. In contrast, multi-source and multi-band remote sensing data contain richer and more comprehensive surface information. Therefore, a method of combining multi-band SAR data and employing machine learning models for SSM inversion was proposed. C-band Sentinel-1 SAR data, X-band TerraSAR data, and Sentinel-2 optical data were used in this study. Six commonly used feature parameters were extracted from these data. Three machine learning methods suitable for small-sample training, including Genetic Algorithms Back Propagation (GA-BP), support vector regression (SVR), and Random Forest (RF), were employed to construct the SSM inversion models. The differences in SSM retrieval accuracy were compared when two different bands of SAR data were combined with optical data separately and when three types of data were used together. The results show that the best inversion performance was achieved when all three types of remote sensing data were used simultaneously. Additionally, compared to the C-band SAR data, the X-band SAR data exhibited superior performance. Ultimately, the RF model achieved the best accuracy, with a determinable coefficient of 0.9186, a root mean square error of 0.0153 cm3/cm3, and a mean absolute error of 0.0122 cm3/cm3. The results indicate that utilizing multi-band remote sensing data for SSM inversion offers significant advantages, providing a new perspective for the precise monitoring of SSM. [ABSTRACT FROM AUTHOR]

Accurate marine wind detection under all-weather conditions is crucial for maritime activities. The joint detection of lidar and radar is supposed to be a potential way to carry out the all-weather sensing of wind. However, their performance analysis has not been well studied, particularly in the far sea area, where the wind-tracing particles are quite different from those inland. Based on the particle distributions above the sea surface under different weather conditions, this study investigated the scattering and attenuation effects of lidar and radar waves in open sea areas with the Mie theory and T-matrix method. Then, the maximum detection range and velocity accuracies of lidar/radar were comprehensively analyzed based on detection principles to optimize the combination of lidar and radar. According to the simulation results, it was difficult to maintain the detection capability of a single lidar/radar under all-weather conditions, and 1.55 μ m lidar and W-band radar presented a promising joint detection scheme, as they exhibited optimal weather adaptability in clear sky and precipitation conditions, respectively. [ABSTRACT FROM AUTHOR]

This study describes a method that combines synthetic aperture radar (SAR) data with shallow-water modeling to estimate flood hazards at a local level. The method uses particle filtering to integrate flood probability maps derived from SAR imagery with simulated flood maps for various flood return periods within specific river sub-catchments. We tested this method in a section of the Severn River basin in the UK. Our research involves 11 SAR flood observations from ENVISAT ASAR images, an ensemble of 15 particles representing various pre-computed flood scenarios, and 4 masks of spatial units corresponding to different river segmentations. Empirical results yield maps of maximum flood extent with associated return periods, reflecting the local characteristics of the river. The results are validated through a quantitative comparison approach, demonstrating that our method improves the accuracy of flood extent and scenario estimation. This provides spatially distributed return periods in sub-catchments, making flood hazard monitoring effective at a local scale. [ABSTRACT FROM AUTHOR]

The article discusses the importance of accurate monitoring and early warning of heavy rainfall induced by strong convection for preventing natural disasters such as floods and landslides. It highlights the use of weather radars as the most powerful technique for monitoring natural hazards caused by heavy rainstorms. The article also covers various topics related to radar signal processing methods, error characterization, new sensing techniques, and the application of radar data in weather analysis and forecasting. It emphasizes the advancements in weather radar technology and its potential for revolutionizing meteorological forecasting and disaster preparedness. [Extracted from the article]

High-performance radar systems are becoming increasingly popular for accurately detecting obstacles in front of unmanned vehicles in fog, snow, rain, night and other scenarios. The use of these systems is gradually expanding, such as indicating empty space and environment detection rather than just detecting and tracking the moving targets. In this paper, based on our high-resolution radar system, a three-dimensional point cloud image algorithm is developed and implemented. An axis translation and compensation algorithm is applied to minimize the point spreading caused by the different mounting positions and the alignment error of the Global Navigation Satellite System (GNSS) and radar. After applying the algorithm, a point cloud image for a corner reflector target and a parked vehicle is created to directly compare the improved results. A recently developed radar system is mounted on the vehicle and it collects data through actual road driving. Based on this, a three-dimensional point cloud image including an axis translation and compensation algorithm is created. As a results, not only the curbstones of the road but also street trees and walls are well represented. In addition, this point cloud image is made to overlap and align with an open source web browser (QtWeb)-based navigation map image to implement the imaging algorithm and thus determine the location of the vehicle. This application algorithm can be very useful for positioning unmanned vehicles in urban area where GNSS signals cannot be received due to a large number of buildings. Furthermore, sensor fusion, in which a three-dimensional point cloud radar image appears on the camera image, is also implemented. The position alignment of the sensors is realized through intrinsic and extrinsic parameter optimization. This high-performance radar application algorithm is expected to work well for unmanned ground or aerial vehicle route planning and avoidance maneuvers in emergencies regardless of weather conditions, as it can obtain detailed information on space and obstacles not only in the front but also around them. [ABSTRACT FROM AUTHOR]

Ground-penetrating radar (GPR) faces complex challenges in identifying underground rock formations and lithological structures. The diversity, intricate shapes, and electromagnetic properties of subsurface rock formations make their accurate detection difficult. Additionally, the heterogeneity of subsurface media, signal scattering, and non-linear propagation effects contribute to the complexity of signal interpretation. To address these challenges, this study fully considers the unique advantages of convolutional neural networks (CNNs) in accurately identifying underground rock formations and lithological structures, particularly their powerful feature extraction capabilities. Deep learning models possess the ability to automatically extract complex signal features from radar data, while also demonstrating excellent generalization performance, enabling them to handle data from various geological conditions. Moreover, deep learning can efficiently process large-scale data, thereby improving the accuracy and efficiency of identification. In our research, we utilized deep neural networks to process GPR signals, using radar images as inputs and generating structure-related information associated with rock formations and lithological structures as outputs. Through training and learning, we successfully established an effective mapping relationship between radar images and lithological label signals. The results from synthetic data indicate a rock block identification success rate exceeding 88%, with a satisfactory continuity identification of lithological structures. Transferring the network to measured data, the trained model exhibits excellent performance in predicting data collected from the field, further enhancing the geological interpretation and analysis. Therefore, through the results obtained from synthetic and measured data, we can demonstrate the effectiveness and feasibility of this research method. [ABSTRACT FROM AUTHOR]

There is increasing interest in space domain awareness worldwide, motivating investigation of the use of non-traditional sensors for space surveillance. One such class of sensor is VHF wind profiling radars, which have a low cost relative to other radars typically applied to this task. These radars are ubiquitous throughout the world and may potentially offer complementary space surveillance capabilities to the Space Surveillance Network. This paper updates an initial investigation on the use of Buckland Park VHF wind profiling radars for observing resident space objects in low Earth orbit to further investigate the space surveillance capabilities of the sensor class. The radar was operated during the Australian Defence "SpaceFest" 2019 activity, incorporating new beam scheduling and signal processing functionality that extend upon the capabilities described in the initial investigation. The beam scheduling capability used two-line element propagations to determine the appropriate beam direction to use to observe transiting satellites. The signal processing capabilities used a technique based on the Keystone transform to correct for range migration, allowing the development of new signal processing modes that allow the coherent integration time to be increased to improve the SNR of the observed targets, thereby increasing the detection rate. The results reveal that 5874 objects were detected over 10 days, with 2202 unique objects detected, representing a three-fold increase in detection rate over previous single-beam direction observations. The maximum detection height was 2975.4 km, indicating a capability to detect objects in medium Earth orbit. A minimum detectable RCS at 1000 km of −10.97 dBm2 (0.09 m2) was observed. The effects of Faraday rotation resulting from the use of linearly polarised antennae are demonstrated. The radar's utility for providing total electron content (TEC) measurements is investigated using a high-range resolution mode and high-precision ephemeris data. The short-term Fourier transform is applied to demonstrate the radar's ability to investigate satellite rotation characteristics and monitor ionospheric plasma waves and instabilities. [ABSTRACT FROM AUTHOR]

In contemporary warfare, radar countermeasures have become multifunctional and intelligent, rendering the conventional jamming method and platform unsuitable for the modern radar countermeasures battlefield due to their limited efficiency. Reinforcement learning has been proven to be a practical solution for cognitive jamming decision-making in the cognitive electronic warfare. In this paper, we proposed a radar-jamming decision-making algorithm based on an improved Q-Learning algorithm. This improved Q-Learning algorithm ameliorated the problem of overestimating the Q-value that exists in the Q-Learning algorithm by introducing a second Q-table. At the same time, we performed a comprehensive design and implementation based on the classical Q-Learning algorithm, deploying it to a Field Programmable Gate Array (FPGA) hardware. We decomposed the implementation of the reinforcement learning algorithm into individual steps and described each step using a hardware description language. Then, the reinforcement learning algorithm can be computed on FPGA by linking the logic modules with valid signals. Experiments show that the proposed Q-Learning algorithm obtains considerable improvement in performance over the classical Q-Learning algorithm. Additionally, they confirm that the FPGA hardware can achieve great efficiency improvement on the radar-jamming decision-making algorithm implementation. [ABSTRACT FROM AUTHOR]