Search

Satellite remote sensing is the best way to derive sea surface skin temperature (SSTskin) in the Arctic. However, as surface temperature retrieval algorithms in the infrared (IR) part of the electromagnetic spectrum are designed to compensate for atmospheric effects mainly due to water vapor, MODIS SSTskin retrievals have larger uncertainties at high latitudes where the atmosphere is very dry and cold, which is an extreme in the distribution of global conditions. MODIS R2019 SSTskin fields are currently derived using latitudinally and monthly dependent algorithm coefficients, including an additional band above 60°N to better represent the effects of Arctic atmospheres. However, the R2019 processing of MODIS SSTskin still has some unrevealed error characteristics. This study uses 21 years (2002–2022) of collocated, simultaneous satellite brightness temperature (BT) data from Aqua MODIS and in situ buoy-measured subsurface temperature data from iQuam for validation. Unlike elsewhere over the oceans, the 11 μm and 12 μm BT differences are poorly related to the column water vapor at high latitudes, resulting in poor atmospheric water vapor correction. Anomalous BT difference signals are identified, caused by the temperature and humidity inversions in the lower troposphere, which are especially significant during the summer. Although the existence of negative BT differences is physically reasonable, this makes the retrieval algorithm lose its effectiveness. Moreover, the statistics of the MODIS SSTskin data when compared with the iQuam buoy temperature data show large differences (in terms of mean and standard deviation) for the matchups at the Northern Atlantic and Pacific sides of the Arctic due to the disparity of in situ measurements and distinct surface and vertical atmospheric conditions. Therefore, it is necessary to further improve the retrieval algorithms to obtain more accurate MODIS SSTskin data to study surface ocean processes and climate change in the Arctic. [ABSTRACT FROM AUTHOR]

Lake Sevan in Armenia is a unique, large, alpine lake given its surface, volume, and geographic location. The lake suffered from progressing eutrophication and, since 2018, massive cyanobacterial blooms repeatedly occurred. Although the lake is comparatively intensely monitored, the feasibility to reliably detect the algal bloom events appeared to be limited by the established in situ monitoring, mostly because algal bloom dynamics are far more dynamic than the realized monitoring frequency of monthly samplings. This mismatch of monitoring frequency and ecosystem dynamics is a notorious problem in lakes, where plankton dynamics often work at relatively short time scales. Satellite-based monitoring with higher overpass frequency, e.g., by Sentinel-3 OLCI with its daily overcasts, are expected to fill this gap. The goal of our study was therefore the establishment of a fast detection of algal blooms in Lake Sevan that operates at the time scale of days instead of months. We found that algal bloom detection in Lake Sevan failed, however, when it was only based on chlorophyll due to complications with optical water properties and atmospheric corrections. Instead, we obtained good results when true-color RGB images were analyzed or a specifically designed satellite-based HAB indicator was applied. These methods provide reliable and very fast bloom detection at a scale of days. At the same time, our results indicated that there are still considerable limitations for the use of remote sensing when it comes to a fully quantitative assessment of algal dynamics in Lake Sevan. The observations made so far indicate that algal blooms are a regular feature in Lake Sevan and occur almost always when water temperatures surpass approximately 20 °C. Our satellite-based method effectively allowed for bloom detection at short time scales and identified blooms over several years where classical sampling failed to do so, simply because of the unfortunate timing of sampling dates and blooming phases. The extension of classical in situ sampling by satellite-based methods is therefore a step towards a more reliable, faster, and more cost-effective detection of algal blooms in this valuable lake. [ABSTRACT FROM AUTHOR]

Land Surface Temperature (LST) is integral to our understanding of the radiative energy budget of the Earth's surface since it provides the best approximation to the thermodynamic temperature that drives the outgoing longwave flux from surface to atmosphere. Since 5 July 2017, an operational LST product has been available from the Sentinel-3A mission, with the corresponding product being available from Sentinel-3B since 17 November 2018. Here, we present the first paper describing formal products, including algorithms, for the Sea and Land Surface Temperature Radiometer (SLSTR) instruments onboard Sentinel-3A and 3B (SLSTR-A and SLSTR-B, respectively). We evaluate the quality of both the Land Surface Temperature Climate Change Initiative (LST_cci) product and the Copernicus operational LST product (SL_2_LST) for the years 2018 to 2021. The evaluation takes the form of a validation against ground-based observations of LST across eleven well-established in situ stations. For the validation, the mean absolute daytime and night-time difference against the in situ measurements for the LST_cci product is 0.77 K and 0.50 K, respectively, for SLSTR-A, and 0.91 K and 0.54 K, respectively, for SLSTR-B. These are an improvement on the corresponding statistics for the SL_2_LST product, which are 1.45 K (daytime) and 0.76 (night-time) for SLSTR-A, and 1.29 K (daytime) and 0.77 (night-time) for SLSTR-B. The key influencing factors in this improvement include an upgraded database of reference states for the generation of retrieval coefficients, higher stratification of the auxiliary data for the biome and fractional vegetation, and enhanced cloud masking. [ABSTRACT FROM AUTHOR]

Sea surface temperature (SST) data from the Sea and Land Surface Temperature Radiometer (SLSTR) onboard the Sentinel-3 satellites have been used in the Met Office's Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) since 2019 (Sentinel-3A SST data since March 2019 and Sentinel-3B data since December 2019). The impacts of using SLSTR SSTs and the SLSTR as the reference sensor for the bias correction of other satellite data have been assessed using independent Argo float data. Combining Sentinel-3A and -3B SLSTRs with two Visible Infrared Imaging Radiometer Suite (VIIRS) sensors (onboard the joint NASA/NOAA Suomi National Polar-orbiting Partnership and National Oceanic and Atmospheric Administration-20 satellites) in the reference dataset has also been investigated. The results indicate that when using the SLSTR as the only reference satellite sensor, the OSTIA system becomes warmer overall, although there are mixed impacts in different parts of the global ocean. Using both the VIIRS and the SLSTR in the reference dataset leads to moderate but more consistent improvements globally. Numerical weather prediction (NWP) results also indicate a better performance when using both the VIIRS and the SLSTR in the reference dataset compared to only using the SLSTR at night. Combining the VIIRS and the SLSTR with latitudinal weighting shows the best validation results against Argo, but further investigation is required to refine this method. [ABSTRACT FROM AUTHOR]

Over the past few decades, the oceans have stored the majority of the excess heat in the climate system resulting from anthropogenic emissions. An accurate, long-term sea surface temperature (SST) dataset is essential for monitoring and researching the changes to the global oceans. A variety of SST datasets have been produced by various institutes over the years, and here, we present a new SST data record produced originally within the Copernicus Marine Environment Monitoring Service (which is therefore named CMEMS v2.0) and assess: (1) its accuracy compared to independent observations; (2) how it compares with the previous version (named CMEMS v1.2); and (3) its performance during two major volcanic eruptions. By comparing both versions of the CMEMS datasets using independent in situ observations, we show that both datasets are within the target accuracy of 0.1 K, but that CMEMS v2.0 is closer to the ground truth. The uncertainty fields generated by the two analyses were also compared, and CMEMS v2.0 was found to provide a more accurate estimate of its own uncertainties. Frequency and vector analysis of the SST fields determined that CMEMS v2.0 feature resolution and horizontal gradients were also superior, indicating that it resolved oceanic features with greater clarity. The behavior of the two analyses during two volcanic eruption events (Mt. Pinatubo and El Chichón) was examined. A comparison with the HadSST4 gridded in situ dataset suggested a cool bias in the CMEMS v2.0 dataset versus the v1.2 dataset following the Pinatubo eruption, although a comparison with sparser buoy-only observations yielded less clear results. No clear impact of the El Chichón eruption (which was a smaller event than Mt. Pinatubo) on CMEMS v2.0 was found. Overall, with the exception of a few specific and extreme events early in the time series, CMEMS v2.0 possesses high accuracy, resolution, and stability and is recommended to users. [ABSTRACT FROM AUTHOR]

Accurate prediction of lake surface water temperature (LSWT) is essential for understanding the impacts of climate change on aquatic ecosystems and for guiding environmental management strategies. Predictions of LSWT for two prominent lakes in northern China, Qinghai Lake and Hulun Lake, under various future climate scenarios, were conducted in the present study. Utilizing historical hydrometeorological data and MODIS satellite observations (MOD11A2), we employed three advanced machine learning models—Random Forest (RF), XGBoost, and Multilayer Perceptron Neural Network (MLPNN)—to predict monthly average LSWT across three future climate scenarios (ssp119, ssp245, ssp585) from CMIP6 projections. Through the comparison of training and validation results of the three models across both lake regions, the RF model demonstrated the highest accuracy, with a mean MAE of 0.348 °C and an RMSE of 0.611 °C, making it the most optimal and suitable model for this purpose. With this model, the predicted LSWT for both lakes reveals a significant warming trend in the future, particularly under the high-emission scenario (ssp585). The rate of increase is most pronounced under ssp585, with Hulun Lake showing a rise of 0.55 °C per decade (R2 = 0.72) and Qinghai Lake 0.32 °C per decade (R2 = 0.85), surpassing trends observed under ssp119 and ssp245. These results underscore the vulnerability of lake ecosystems to future climate change and provide essential insights for proactive climate adaptation and environmental management. [ABSTRACT FROM AUTHOR]

The National Oceanic and Atmospheric Administration's (NOAA) Center for Satellite Applications and Research (STAR) facilitates and enables societal benefits from satellite oceanography, supporting operational and experimental satellite missions, developing new and improved ocean observing capabilities, engaging users by developing and distributing fit-for-purpose data, applications, tools, and services, and curating, translating, and integrating diverse data products into information that supports informed decision making. STAR research, development, and application efforts span from passive visible, infrared, and microwave observations to active altimetry, scatterometry, and synthetic aperture radar (SAR) observations. These efforts directly support NOAA's operational geostationary (GEO) and low Earth orbit (LEO) missions with calibration/validation and retrieval algorithm development, implementation, maintenance, and anomaly resolution, as well as leverage the broader international constellation of environmental satellites for NOAA's benefit. STAR's satellite data products and services enable research, assessments, applications, and, ultimately, decision making for understanding, predicting, managing, and protecting ocean and coastal resources, as well as assessing impacts of change on the environment, ecosystems, and climate. STAR leads the NOAA Coral Reef Watch and CoastWatch/OceanWatch/PolarWatch Programs, helping people access and utilize global and regional satellite data for ocean, coastal, and ecosystem applications. [ABSTRACT FROM AUTHOR]

The infrared (IR) satellite remote sensing of sea surface skin temperature (SSTskin) is challenging in the northern high-latitude region, especially in the Arctic because of its extreme environmental conditions, and thus the accuracy of SSTskin retrievals is questionable. Several Saildrone uncrewed surface vehicles were deployed at the Pacific side of the Arctic in 2019, and two of them, SD-1036 and SD-1037, were equipped with a pair of IR pyrometers on the deck, whose measurements have been shown to be useful in the derivation of SSTskin with sufficient accuracy for scientific applications, providing an opportunity to validate satellite SSTskin retrievals. This study aims to assess the accuracy of MODIS-retrieved SSTskin from both Aqua and Terra satellites by comparisons with collocated Saildrone-derived SSTskin data. The mean difference in SSTskin from the SD-1036 and SD-1037 measurements is ~0.4 K, largely resulting from differences in the atmospheric conditions experienced by the two Saildrones. The performance of MODIS on Aqua and Terra in retrieving SSTskin is comparable. Negative brightness temperature (BT) differences between 11 μm and 12 μm channels are identified as being physically based, but are removed from the analyses as they present anomalous conditions for which the atmospheric correction algorithm is not suited. Overall, the MODIS SSTskin retrievals show negative mean biases, −0.234 K for Aqua and −0.295 K for Terra. The variations in the retrieval inaccuracies show an association with diurnal warming events in the upper ocean from long periods of sunlight in the Arctic. Also contributing to inaccuracies in the retrieval is the surface emissivity effect in BT differences characterized by the Emissivity-introduced BT difference (EΔBT) index. This study demonstrates the characteristics of MODIS-retrieved SSTskin in the Arctic, at least at the Pacific side, and underscores that more in situ SSTskin data at high latitudes are needed for further error identification and algorithm development of IR SSTskin. [ABSTRACT FROM AUTHOR]

Coastal areas are among the most productive areas in the world, ecologically as well as economically. Sea Surface Temperature (SST) has evolved as the major essential climate variable (ECV) and ocean variable (EOV) to monitor land–ocean interactions and oceanic warming trends. SST monitoring can be achieved by means of remote sensing. The current relatively coarse spatial resolution of established SST products limits their potential in small-scale, coastal zones. This study presents the first analysis of the TIMELINE 1 km SST product from AVHRR in four key European regions: The Northern and Baltic Sea, the Adriatic Sea, the Aegean Sea, and the Balearic Sea. The analysis of monthly anomaly trends showed high positive SST trends in all study areas, exceeding the global average SST warming. Seasonal variations reveal peak warming during the spring, early summer, and early autumn, suggesting a potential seasonal shift. The spatial analysis of the monthly anomaly trends revealed significantly higher trends at near-coast areas, which were especially distinct in the Mediterranean study areas. The clearest pattern was visible in the Adriatic Sea in March and May, where the SST trends at the coast were twice as high as that observed at a 40 km distance to the coast. To validate our findings, we compared the TIMELINE monthly anomaly time series with monthly anomalies derived from the Level 4 CCI SST anomaly product. The comparison showed an overall good accordance with correlation coefficients of R > 0.82 for the Mediterranean study areas and R = 0.77 for the North and Baltic Seas. This study highlights the potential of AVHRR Local Area Coverage (LAC) data with 1 km spatial resolution for mapping long-term SST trends in areas with high spatial SST variability, such as coastal regions. [ABSTRACT FROM AUTHOR]

Sea surface temperature (SST) constitutes a pivotal physical parameter in the investigation of atmospheric, oceanic, and air–sea exchange processes. The retrieval of SST through satellite passive microwave (PMW) technology effectively mitigates the interference posed by cloud cover, addressing a longstanding challenge. Nevertheless, conventional functional representations often fall short in capturing the intricate interplay of factors influencing SST. Leveraging neural networks (NNs), known for their adeptness in tackling nonlinear and intricate problems, holds great promise in SST retrieval. Nonetheless, NNs exhibit a high sensitivity to initial weights and thresholds, rendering them susceptible to local optimization issues. In this study, we present a novel machine learning (ML) approach for SST retrieval using PMW measurements, drawing from the Sparrow Search Algorithm (SSA) and Back-Propagation neural network (BPNN) methodologies. The core premise involves the optimization of the BP neural network's initial weights and thresholds through an enhanced SSA algorithm employing various optimization strategies. This optimization aims to provide superior parameters for the training of the BP neural network. Employing AMSR2 brightness temperature data, sea surface wind speed data, and buoy SST measurements, we construct the ISSA-BP model for sea surface temperature retrieval. The validation of the ISSA-BP model against the test data is conducted and compared against the multiple linear regression (MLR) model, an unoptimized BP model, and an unimproved SSA-BP model. The results manifest an impressive R-squared (R2) value of 0.9918 and a root-mean-square error (RMSE) of 0.8268 °C for the ISSA-BP model, attesting to its superior accuracy. Furthermore, the ISSA-BP model was applied to retrieve global sea surface temperatures on 15 July 2022, yielding an R2 of 0.9926 and an RMSE of 0.7673 °C for the OISST product on the same day, underscoring its excellent concordance. The results indicate that SST can be efficiently and accurately retrieved using the model proposed in this paper, based on satellite PMW measurements. This finding underscores the potential of employing machine learning algorithms for SST retrieval and offers a valuable reference for future studies focusing on the retrieval of other sea surface parameters. [ABSTRACT FROM AUTHOR]

The Sentinel-1 imaging radar mission provides a short revisit-time, continuous all-weather, and day-and-night imagery at the C-band, which brings opportunities for the dynamic extraction of lake water areas. For wetland-type lakes, it is difficult to distinguish between the water, submerged plants, and mudflats at the edge of a lake, which leads to difficulty in recognizing the water edge of a lake and affects the accuracy of lake water area extraction. In this paper, a water area extraction and water level prediction algorithm based on Sentinel-1 dual-polarization data decomposition is proposed to solve the problem. We can accurately extract lake water through generalized Stokes polarization decomposition. At the same time, we can verify the accuracy of water area extraction by establishing the water area and in situ water level elevation (A–E) relationship, and predicting the water level according to the calculated water area. In this study, dual-polarization Sentinel-1 time series SAR data covering the Dongting Lake wetland from 2018 to 2022 are used to verify the proposed water area extraction algorithm and establish the A–E relationship of the East Dongting Lake basin. The results show that the generalized Stokes decomposition parameters are very sensitive to the water boundary, and the R2 of the water area and the water level can reach 0.98 by using the piecewise linear function. It confirms the accuracy of the water area inversion, which is of extremely important significance for the high-precision monitoring of the water area of Dongting Lake with long-term Sentinel-1 data. Meanwhile, the predicted lake water level acquired using the A–E relationship established in this paper is compared with the field water level, with an RMSE of 0.4857 m and R2 of 0.9930. This means that the water level derived using the method in this study is quite compatible with the field observations, which provides a good idea for the water level monitoring of lakes lacking hydrological monitoring stations. [ABSTRACT FROM AUTHOR]

The Fengyun-4A (FY-4A) satellite is a new-generation geostationary meteorological satellite developed by China. The advanced geosynchronous radiation imager (AGRI), one of the key payloads onboard FY-4A, can monitor sea surface temperature (SST). This paper compares FY-4A/AGRI SST with in situ and Himawari-8/advanced Himawari imager (AHI) SST. The study area spans 30°E–180°E, 60°S–60°N, and the study period is from January 2019 to December 2021. The matching time window of the three data is 30 min, and the space window is 0.1°. The quality control criterion is to select all clear sky and well-distributed matchups within the study period, removing the influence of SST fronts. The results of the difference between FY-4A/AGRI and in situ SST show a bias of −0.12 °C, median of −0.05 °C, standard deviation (STD) of 0.76 °C, robust standard deviation (RSD) of 0.68 °C, and root mean square error (RMSE) of 0.77 °C for daytime and a bias of 0.00 °C, median of 0.05 °C, STD of 0.78 °C, RSD of 0.72 °C, and RMSE of 0.78 °C for nighttime. The results of the difference between FY-4A/AGRI SST and Himawari-8/AHI SST show a bias of 0.04 °C, median of 0.10 °C, STD of 0.78 °C, RSD of 0.70 °C, and RMSE of 0.78 °C for daytime and the bias of 0.30 °C, median of 0.34 °C, STD of 0.81 °C, RSD of 0.76 °C, and RMSE of 0.86 °C for nighttime. The three-way error analysis also indicates a relatively larger error of AGRI SST. Regarding timescale, the bias and STD of FY-4A/AGRI SST show no seasonal correlation, but FY-4A/AGRI SST has a noticeable bias jump in the study period. Regarding spatial scale, FY-4A/AGRI SST shows negative bias at the edge of the AGRI SST coverage in the Pacific region near 160°E longitude and positive bias in high latitudes of the southern hemisphere. The accuracy of FY-4A/AGRI SST depends on the satellite zenith angle and water vapor. Further research on the FY-4A/AGRI SST retrieval algorithm accounting for the variability of water vapor will be conducted. [ABSTRACT FROM AUTHOR]

The thermodynamics of many lakes around the globe are shifting under a warming climate, affecting nutrients and oxygen transportation within the lake and altering lake biota. However, long-term variation in lake heat and water balance is not well known, particularly for regions like the Tibetan Plateau. This study investigates the long-term (1963–2019) variation in the heat balance of a large lake in the Tibetan Plateau (Nam Co) by combining the strengths of modeling and remote sensing. Remotely sensed lake surface water temperatures from the Moderate Resolution Imaging Spectroradiometer (MODIS) and Along Track Scanning Radiometer Reprocessing for Climate: Lake Surface Water Temperature and Ice Cover (ARC-Lake) are used to calibrate and validate a conceptual model (air2water) and a thermodynamic model (LAKE) for the studied lake, for which in situ observation is limited. The results demonstrate that remotely sensed lake surface water temperature can serve as a valuable surrogate for in situ observations, facilitating effective calibration and validation of lake models. Compared with the MODIS-based lake surface water temperature (LSWT) for the period 2000–2019, the correlation coefficient and root mean square error (RMSE) of the LAKE model are 0.8 and 4.2 °C, respectively, while those of the air2water model are 0.9 and 2.66 °C, respectively. Based on modeling, we found that the water temperature of Nam Co increased significantly (p < 0.05) during the period of 1963–2019, corresponding to a warming climate. The rate of water temperature increase is highest at the surface layer (0.41 °C/10a). This warming trend is more noticeable in June and November. From 1963 to 2019, net radiation flux increased at a rate of 0.5 W/m2/10a. The increase in net radiation is primarily responsible for the warming of the lake water, while its impact on changes in lake evaporation is comparatively minor. The approaches developed in this study demonstrate the flexibility of incorporating remote sensing observations into modeling. The results on long-term changes in heat balance could be valuable for a systematic understanding of lake warming in response to a changing climate in the Tibetan Plateau. [ABSTRACT FROM AUTHOR]

In the following decade(s), a set of satellite missions carrying thermal infrared (TIR) imagers with a relatively high noise equivalent differential temperature (NEdT) are expected, e.g., the high resolution TIR imagers flying on the future Thermal infraRed Imaging Satellite for High-resolution Natural resource Assessment (TRISHNA), Land Surface Temperature Monitoring (LSTM) and NASA-JPL/ASI Surface Biology and Geology Thermal (SBG) missions or the secondary payload on board the ESA Earth Explorer 10 Harmony. The instruments on board these missions are expected to be characterized by an NEdT of ⪆0.1 K. In order to reduce the impact of radiometric noise on the retrieved sea surface temperature (SST), this study investigates the possibility of applying a multi-pixel atmospheric correction based on the hypotheses that (i) the spatial variability scales of radiatively active atmospheric variables are, on average, larger than those of the SST and (ii) the effect of atmosphere is accounted for via the split window (SW) difference. Based on 32 Sentinel 3 SLSTR case studies selected in oceanic regions where SST features are mainly driven by meso to sub-mesoscale turbulence (e.g., corresponding to major western boundary currents), this study documents that the local spatial variability of the SW difference term on the scale of ≃3 × 3 km2 is comparable with the noise associated with the SW difference. Similarly, the power spectra of the SW term are shown to have, for small scales, the behavior of white noise spectra. On this basis, we suggest to average the SW term and to use it for the atmospheric correction procedure to reduce the impact of radiometric noise. In principle, this methodology can be applied on proper scales that can be dynamically defined for each pixel. The applicability of our findings to high-resolution TIR missions is discussed and an example of an application to ECOSTRESS data is reported. [ABSTRACT FROM AUTHOR]

Lake ice phenology is an indicator of past and present climate, it is sensitive to regional and global climate change. In the past few decades, the climate of Central Asia has changed significantly due to global warming and anthropogenic activities. However, there are few studies on the lake ice phenology in Central Asia. In this study, the lake ice phenology of 53 lakes in Central Asia were extracted using MODIS daily LST products from 2002 to 2020. The results show that MODIS-extracted lake ice phenology is generally consistent with Landsat-extracted and AVHRR-extracted lake ice phenology. Generally, lakes in Central Asia start to freeze from October to December. The trends in the lake ice phenology show strong regional differences. Lakes distributed along the Kunlun Mountains show overall delayed trends in all lake ice phenology variables, while lakes located in southwestern Central Asia show clear advancing trends in the freeze-up start dates (7.06 days) and breakup end dates (6.81 days). Correlations between the phenology of lake ice and local and climatic factors suggest that the ice breakup process and the duration of its complete coverage depend more on heat, while precipitation mainly affects the freezing time of the ice. Wind speed mainly affects the time of completely frozen of ice. In general, the breakup process is more susceptible to climatic factors, while local factors have strong influences on the freeze-up process. [ABSTRACT FROM AUTHOR]

Recent improvements in earth observation technologies and Geographical Information System (GIS) based spatial analysis methods require us to examine the efficiency of the different data-driven methods and decision rules for soil salinity monitoring and degradation mapping. The main objective of this study was to analyze the environmental impacts of the Lake Urmia drought on soil salinity and degradation risk in the plains surrounding the hyper-saline lake. We monitored the impacts of the lake drought on soil salinity by applying spatiotemporal indices to time-series satellite images (1990–2020) in Google Earth Engine environment. We also computed the soil salinity ratio to validate the results and determine the most efficient soil salinity monitoring techniques. We then mapped the soil degradation risk based on GIS spatial decision-making methods. Our results indicated that the Urmia Lake drought is leading to the formation of extensive salt lands, which impact the fertility of the farmlands. The land affected by soil salinity has increased from 2.86% in 1990 to 16.68% in 2020. The combined spectral response index, with a performance of 0.95, was the most efficient image processing method to assess soil salinity. The soil degradation risk map showed that 38.45% of the study area has a high or very high risk of degradation, which is a significant threat to food production. This study presents an integrated geoinformation approach for time-series soil salinity monitoring and degradation risk mapping that supports future studies by comparing the efficiency of different methods as state of the art. From a practical perspective, the results also provide key information for decision-makers, authorities, and local stakeholders in their efforts to mitigate the environmental impacts of lake drought and sustain the food production to sustain the 7.3 million residents. [ABSTRACT FROM AUTHOR]

The Sentinel-3 satellites are equipped with dual-band Microwave Radiometers (MWR) to derive the wet tropospheric correction (WTC) for satellite altimetry. The deployed MWR lack the 18 GHz channel, which mainly provides information on the surface emissivity. Currently, this information is considered using additional parameters, one of which is the sea surface temperature (SST) extracted from static seasonal tables. Recent studies show that the use of a dynamic SST extracted from Numerical Weather Models (ERA5) improves the WTC retrieval. Given that Sentinel-3 carries on board the Sea and Land Surface Temperature Radiometer (SLSTR), from which SST observations are derived simultaneously with those of the Synthetic Aperture Radar Altimeter and MWR sensors, this study aims to develop a synergistic approach between these sensors for the WTC retrieval over open ocean. Firstly, the SLSTR-derived SSTs are evaluated against the ERA5 model; secondly, their impact on the WTC retrieval is assessed. The results show that using the SST input from SLSTR, instead of ERA5, has no impact on the WTC retrieval, both globally and regionally. Thus, for the WTC retrieval, there seems to be no advantage in having collocated SST and radiometer observations. Additionally, this study reinforces the fact that the use of dynamic SST leads to a significant improvement over the current Sentinel-3 WTC operational algorithms. [ABSTRACT FROM AUTHOR]

We found that significant errors occurred when diurnal data instead of diurnal–nocturnal data were used to calculate the daily sea-air CO2 flux (F). As the errors were mainly associated with the partial pressure of CO2 in seawater (pCO2w) and the sea surface temperature (SST) in the control experiment, pCO2w and SST equations were established, which are called the nocturnal effect of the CO2 flux. The root-mean-square error between the real daily CO2 flux (Freal) and the daily CO2 flux corrected for the nocturnal effect (Fcom) was 11.93 mmol m−2 d−1, which was significantly lower than that between the Freal value and the diurnal CO2 flux (Fday) (46.32 mmol m−2 d−1). Thus, the errors associated with using diurnal data to calculate the CO2 flux can be reduced by accounting for the nocturnal effect. The mean global daily CO2 flux estimated based on the nocturnal effect and the sub-regional pCO2w algorithm (cor_Fcom) was −6.86 mol m−2 y−1 (September 2020–August 2021), which was smaller by 0.75 mol m−2 y−1 than that based solely on the sub-regional pCO2w algorithm (day_Fcom). That is, compared with day_Fcom, the global cor_Fcom value overestimated the CO2 sink of the global ocean by 10.89%. [ABSTRACT FROM AUTHOR]

The 40+ years-long sea surface temperature (SST) dataset from 4 km Global Area Coverage (GAC) data of the Advanced Very High-Resolution Radiometers (AVHRR/2s and/3s) flown onboard ten NOAA satellites (N07/09/11/12/14/15/16/17/18/19) has been created under the NOAA AVHRR GAC SST Reanalysis 2 (RAN2) Project. The data were reprocessed with the NOAA Advanced Clear Sky Processor for Ocean (ACSPO) enterprise SST system. Two SST products are reported in the full ~3000 km AVHRR swath: 'subskin' (highly sensitive to true skin SST, but debiased with respect to in situ SST) and 'depth' (a closer proxy for in situ data, but with reduced sensitivity). The reprocessing methodology aims at close consistency of satellite SSTs with in situ SSTs, in an optimal retrieval domain. Long-term orbital and calibration trends were compensated by daily recalculation of regression coefficients using matchups with drifters and tropical moored buoys (supplemented by ships for N07/09), collected within limited time windows centered at the processed day. The nighttime Sun impingements on the sensor black body were mitigated by correcting the L1b calibration coefficients. The Earth view pixels contaminated with a stray light were excluded. Massive cold SST outliers caused by volcanic aerosols following three major eruptions were filtered out by a modified, more conservative ACSPO clear-sky mask. The RAN2 SSTs are available in three formats: swath L2P (144 10-min granules per 24 h interval) and two 0.02° gridded (uncollated L3U, also 144 granules/24 h; and collated L3C, two global maps per 24 h, one for day and one for the night). This paper evaluates the RAN2 SST dataset, with a focus on the L3C product and compares it with two other available AVHRR GAC L3C SST datasets, NOAA Pathfinder v5.3 and ESA Climate Change Initiative v2.1. Among the three datasets, the RAN2 covers the global ocean more completely and shows reduced regional and temporal biases, improved stability and consistency between different satellites, and in situ SSTs. [ABSTRACT FROM AUTHOR]

We present a new approach, based on a multi-parameter back-propagation neural network (BPNN) model, to simultaneously retrieve sea surface wind speed, sea surface temperature, near-surface air temperature, and dewpoint temperature over the global oceans from the Advanced Microwave Scanning Radiometer 2 (AMSR2) onboard the Global Change Observation Mission 1st-Water (GCOM-W1). The model is trained and validated with the collocations of AMSR2 multi-channel (6.9–36.5 GHz) brightness temperatures, under both clear and cloudy conditions, and National Data Buoy Center (NDBC) and Tropical Atmosphere Ocean Project (TAO) buoy measurements along with ECMWF ERA5 reanalysis data. The root-mean-square (rms) errors of BPNN-retrieved sea surface wind speed, sea surface temperature, near-surface air temperature, and dewpoint temperature are 1.13 m/s, 1.02 °C, 1.20 °C, and 1.57 °C, respectively. The first three retrieved geophysical parameters and the estimated relative humidity from near-surface air temperature and dewpoint temperature are used to compute the sensible heat flux (SHF) and latent heat flux (LHF), using an improved bulk flux parametrization. The rms errors of the estimated SHF and LHF from BPNN-derived air–sea interface variables, and those from buoy and reanalysis data, are 18.13 W/m2 and 39.56 W/m2. We also compare SHF and LHF estimates with the Yongxing air–sea flux tower measurements in the northern South China Sea. The estimated SHF and LHF in summer and autumn periods are closer to observations than in winter and spring. The proposed method has potential to derive instantaneous air–sea interface atmospheric and oceanic parameters as well as surface sensible and latent heat fluxes from AMSR2 along-track wide swath observations. [ABSTRACT FROM AUTHOR]

The visible and infrared scanning radiometer (VIRR) onboard the Fengyun-3C (FY-3C) meteorological satellite has 11 μm and 12 μm channels, which are capable of sea surface temperature (SST) observations. This study is based on atmospheric radiative transfer modeling (RTM) by applying Bayesian cloud detection theory and optimal estimation (OE) to obtain sea surface skin temperature ( SST skin ) from VIRR in the Northwest Pacific. The inter-calibration of FY-3C/VIRR 11 μm and 12 μm brightness temperature (BT) is carried out using the Moderate Resolution Imaging Spectroradiometer (MODIS) as the reference sensor. Bayesian cloud detection and OE SST retrieval with the calibration BT data is performed to obtain SST skin . The SST skin retrievals are compared with the buoy SST with a temporal window of 1 h and a spatial window of 0.01°. The bias is −0.12 °C, and the standard deviation is 0.52 °C. Comparisons of the retrieved SST skin with the AVHRR (Advanced Very High Resolution Radiometer) SST skin from European Space Agency Sea Surface Temperature Climate Change Initiative (ESA SST CCI) project show the bias of 0.08 °C and the standard deviation of 0.55 °C. The results indicate that the VIRR SST skin are consistent with AVHRR SST skin and buoy SST. [ABSTRACT FROM AUTHOR]

Although changes in water temperature influence the rates of many ecosystem processes in lakes, knowledge of the water temperature regime for large floodplain lake systems subjected to multiple stressors has received little attention. The coupled models can serve to derive more knowledge on the water temperature impact on lake ecosystems. For this purpose, we used a physically-based hydrodynamic model coupled with a transport model to examine the spatial and temporal behavior and primary causal factors of water temperature within the floodplain of Poyang Lake that is representative of shallow and large lakes in China. Model performance is assessed through comparison with field observations and remote sensing data. The daily water temperature variations within Poyang Lake were reproduced reasonably well by the hydrodynamic model, with the root mean square errors of 1.5-1.9 °C. The modeling results indicate that the water temperature exhibits distinct spatial and temporal variability. The mean seasonal water temperatures vary substantially from 29.1 °C in summer to 7.7 °C in winter, with the highest value in August and the lowest value in January. Although the degree of spatial variability differed considerably between seasons, the water temperature generally decreases from the shallow floodplains to the main flow channels of the lake. As expected, the lake water temperature is primarily affected by the air temperature, solar radiation, wind speed and the inflow temperature, whereas other factors such as cloud cover, relative humidity, precipitation, evaporation and lake topography may play a complementary role in influencing temperature. The current work presents a first attempt to use a coupled model approach, which is therefore a useful tool to investigate the water temperature behavior and its major causal factors for a large floodplain lake system. It would have implications for improving the understanding of Poyang Lake water temperature and supporting planning and management of the lake, its water quality and ecosystem functioning. [ABSTRACT FROM AUTHOR]

This paper aims to develop a global burned area (BA) algorithm for MODIS BRDF-corrected images based on the Random Forest (RF) classifier. Two RF models were generated, including: (1) all MODIS reflective bands; and (2) only the red (R) and near infrared (NIR) bands. Active fire information, vegetation indices and auxiliary variables were taken into account as well. Both RF models were trained using a statistically designed sample of 130 reference sites, which took into account the global diversity of fire conditions. For each site, fire perimeters were obtained from multitemporal pairs of Landsat TM/ETM+ images acquired in 2008. Those fire perimeters were used to extract burned and unburned areas to train the RF models. Using the standard MD43A4 resolution (500 × 500 m), the training dataset included 48,365 burned pixels and 6,293,205 unburned pixels. Different combinations of number of trees and number of parameters were tested. The final RF models included 600 trees and 5 attributes. The RF full model (considering all bands) provided a balanced accuracy of 0.94, while the RF RNIR model had 0.93. As a first assessment of these RF models, they were used to classify daily MCD43A4 images in three test sites for three consecutive years (2006-2008). The selected sites included different ecosystems: Australia (Tropical), Boreal (Canada) and Temperate (California), and extended coverage (totaling more than 2,500,000 km²). Results from both RF models for those sites were compared with national fire perimeters, as well as with two existing BA MODIS products; the MCD45 and MCD64. Considering all three years and three sites, commission error for the RF Full model was 0.16, with an omission error of 0.23. For the RF RNIR model, these errors were 0.19 and 0.21, respectively. The existing MODIS BA products had lower commission errors, but higher omission errors (0.09 and 0.33 for the MCD45 and 0.10 and 0.29 for the MCD64) than those obtained with the RF models, and therefore they showed less balanced accuracies. The RF models developed here should be applicable to other biomes and years, as they were trained with a global set of reference BA sites. [ABSTRACT FROM AUTHOR]

An increasing number of end-users looking for ground data about fire activity in regions where accurate official datasets are not available adopt a free-of-charge global burned area (BA) and active fire (AF) products for applications at the local scale. One of the pressing requirements from the user community is an improved ability to detect small fires (less than 50 ha), whose impact on terrestrial environments is empirically known but poorly quantified, and is often excluded from global earth system models. The newest generation of BA algorithms combines the capabilities of both the BA and AF detection approaches, resulting in a general improvement of detection compared to their predecessors. Accuracy assessments of these products have been done in several ecosystems; but more complex ones, such as regions that are characterized by frequent small fires and steep terrain has never been assessed. This study contributes to the understanding of the performance of global BA and AF products with a first assessment of four selected datasets: MODIS-based MCD45A1; MCD64A1; MCD14ML; and, ESA's Fire_CCI in a mountainous region of northwest Yunnan; P.R. China. Due to the medium to coarse resolution of the tested products and the reduced sizes of fires (often smaller than 50 ha) we used a polygon intersection assessment method where the number and locations of fire events extracted from each dataset were compared against a reference dataset that was compiled using Landsat scenes. The results for the two sample years (2006 and 2009) show that the older, non-hybrid products MCD45A1 and, MCD14ML were the best performers with Sørensen index (F1 score) reaching 0.42 and 0.26 in 2006, and 0.24 and 0.24 in 2009, respectively, while producer's accuracies (PA) were 30% and 43% in 2006, and 16% and 47% in 2009, respectively. All of the four tested products obtained higher probabilities of detection when smaller fires were excluded from the assessment, with PAs for fires bigger than 50 ha being equal to 53% and 61% in 2006, 41% and 66% in 2009 for MCD45A1 and MCD14ML, respectively. Due to the technical limitations of the satellites' sensors, a relatively low performance of the four products was expected. Surprisingly, the new hybrid algorithms produced worse results than the former two. Fires smaller than 50 ha were poorly detected by the products except for the only AF product. These findings are significant for the future design of improved algorithms aiming for increased detection of small fires in a greater diversity of ecosystems. [ABSTRACT FROM AUTHOR]

Accuracy assessment, also referred to as validation, is a key process in the workflow of developing a land cover map. To make this process open and transparent, we have developed a new online tool called LACO-Wiki, which encapsulates this process into a set of four simple steps including uploading a land cover map, creating a sample from the map, interpreting the sample with very high resolution satellite imagery and generating a report with accuracy measures. The aim of this paper is to present the main features of this new tool followed by an example of how it can be used for accuracy assessment of a land cover map. For the purpose of illustration, we have chosen GlobeLand30 for Kenya. Two different samples were interpreted by three individuals: one sample was provided by the GlobeLand30 team as part of their international efforts in validating GlobeLand30 with GEO (Group on Earth Observation) member states while a second sample was generated using LACO-Wiki. Using satellite imagery from Google Maps, Bing and Google Earth, the results show overall accuracies between 53% to 61%, which is lower than the global accuracy assessment of GlobeLand30 but may be reasonable given the complex landscapes found in Kenya. Statistical models were then fit to the data to determine what factors affect the agreement between the three interpreters such as the land cover class, the presence of very high resolution satellite imagery and the age of the image in relation to the baseline year for GlobeLand30 (2010). The results showed that all factors had a significant effect on the agreement. [ABSTRACT FROM AUTHOR]

The main goal of the Soil Moisture and Ocean Salinity (SMOS) mission over land surfaces is the production of global maps of soil moisture (SM) and vegetation optical depth (τ) based on multi-angular brightness temperature (TB) measurements at L-band. The operational SMOS Level 2 and Level 3 soil moisture algorithms account for different surface effects, such as vegetation opacity and soil roughness at 4 km resolution, in order to produce global retrievals of SM and τ. In this study, we present an alternative SMOS product that was developed by INRA (Institut National de la Recherche Agronomique) and CESBIO (Centre d’Etudes Spatiales de la BIOsphère). One of the main goals of this SMOS-INRA-CESBIO (SMOS-IC) product is to be as independent as possible from auxiliary data. The SMOS-IC product provides daily SM and τ at the global scale and differs from the operational SMOS Level 3 (SMOSL3) product in the treatment of retrievals over heterogeneous pixels. Specifically, SMOS-IC is much simpler and does not account for corrections associated with the antenna pattern and the complex SMOS viewing angle geometry. It considers pixels as homogeneous to avoid uncertainties and errors linked to inconsistent auxiliary datasets which are used to characterize the pixel heterogeneity in the SMOS L3 algorithm. SMOS-IC also differs from the current SMOSL3 product (Version 300, V300) in the values of the effective vegetation scattering albedo (ω) and soil roughness parameters. An inter-comparison is presented in this study based on the use of ECMWF (European Center for Medium range Weather Forecasting) SM outputs and NDVI (Normalized Difference Vegetation Index) from MODIS (Moderate-Resolution Imaging Spectroradiometer). A six-year (2010–2015) inter-comparison of the SMOS products SMOS-IC and SMOSL3 SM (V300) with ECMWF SM yielded higher correlations and lower ubRMSD (unbiased root mean square difference) for SMOS-IC over most of the pixels. In terms of τ, SMOS-IC τ was found to be better correlated to MODIS NDVI in most regions of the globe, with the exception of the Amazonian basin and the northern mid-latitudes. [ABSTRACT FROM AUTHOR]

In the framework of the European Copernicus programme, the European Space Agency (ESA) has launched the Sentinel-2 (S2) Earth Observation (EO) mission which provides optical high spatial resolution imagery over land and coastal areas. As part of this mission, a tool (named S2-RUT, from Sentinel-2 Radiometric Uncertainty Tool) has been developed. The tool estimates the radiometric uncertainty associated with each pixel in the top-of-atmosphere (TOA) reflectance factor images provided by ESA. This paper describes the design and development process of the initial version of the S2-RUT tool. The initial design step describes the S2 radiometric model where a set of uncertainty contributors are identified. Each of the uncertainty contributors is specified by reviewing the preand post-launch characterisation. The identified uncertainty contributors are combined following the guidelines in the 'Guide to Expression of Uncertainty in Measurement' (GUM) model and this combination model is further validated by comparing the results to a multivariate Monte Carlo Method (MCM). In addition, the correlation between the different uncertainty contributions and the impact of simplifications in the combination model have been studied. The software design of the tool prioritises an efficient strategy to read the TOA reflectance factor images, extract the auxiliary information from the metadata in the satellite products and the codification of the resulting uncertainty image. This initial version of the tool has been implemented and integrated as part of the Sentinels Application Platform (SNAP). [ABSTRACT FROM AUTHOR]

Classification of clouds, cirrus, snow, shadows and clear sky areas is a crucial step in the pre-processing of optical remote sensing images and is a valuable input for their atmospheric correction. The Multi-Spectral Imager on board the Sentinel-2's of the Copernicus program offers optimized bands for this task and delivers unprecedented amounts of data regarding spatial sampling, global coverage, spectral coverage, and repetition rate. Efficient algorithms are needed to process, or possibly reprocess, those big amounts of data. Techniques based on top-of-atmosphere reflectance spectra for single-pixels without exploitation of external data or spatial context offer the largest potential for parallel data processing and highly optimized processing throughput. Such algorithms can be seen as a baseline for possible trade-offs in processing performance when the application of more sophisticated methods is discussed. We present several ready-to-use classification algorithms which are all based on a publicly available database of manually classified Sentinel-2A images. These algorithms are based on commonly used and newly developed machine learning techniques which drastically reduce the amount of time needed to update the algorithms when new images are added to the database. Several ready-to-use decision trees are presented which allow to correctly label about 91% of the spectra within a validation dataset. While decision trees are simple to implement and easy to understand, they offer only limited classification skill. It improves to 98% when the presented algorithm based on the classical Bayesian method is applied. This method has only recently been used for this task and shows excellent performance concerning classification skill and processing performance. A comparison of the presented algorithms with other commonly used techniques such as random forests, stochastic gradient descent, or support vector machines is also given. Especially random forests and support vector machines show similar classification skill as the classical Bayesian method. [ABSTRACT FROM AUTHOR]

The Land Surface Albedo (LSA) was estimated in the broader Mediterranean area, on an 8-day basis, for the period 2001-2012. MODIS (Moderate Resolution Imaging Spectroradiometer) albedo product parameters, at 1 km 1 km spatial resolution, were used. LSA changes during the above study period were also estimated, based on annual average values. Results revealed increasing LSA trends dominating in the Levant region and decreasing in NW Africa, of the order of 3.3% and -6.6%, respectively, while mixed signs were observed in southern Europe. Three factors that can determine the LSA changes were investigated: land cover changes, rainfall changes and Aerosol Optical Thickness (AOT) spatio-temporal variability. The analysis made clear that land cover and rainfall changes affect LSA at local and regional scales, while the effect of AOT was not important. Land cover changes revealed deforestation hot spots, where LSA was increased by 13%-14%, while an increase in rainfall over many areas in NW Africa appears to have caused a corresponding decrease in LSA by over 5%. These findings highlight the importance of a global and continuous LSA monitoring at both regional and local scales, which is necessary for both climate monitoring and modeling studies. [ABSTRACT FROM AUTHOR]

The study of urban climate requires frequent and accurate monitoring of land surface temperature (LST), at the local scale. Since currently, no space-borne sensor provides frequent thermal infrared imagery at high spatial resolution, the scientific community has focused on synergistic methods for retrieving LST that can be suitable for urban studies. Synergistic methods that combine the spatial structure of visible and near-infrared observations with the more frequent, but low-resolution surface temperature patterns derived by thermal infrared imagery provide excellent means for obtaining frequent LST estimates at the local scale in cities. In this study, a new approach based on spatial-spectral unmixing techniques was developed for improving the spatial resolution of thermal infrared observations and the subsequent LST estimation. The method was applied to an urban area in Crete, Greece, for the time period of one year. The results were evaluated against independent high-resolution LST datasets and found to be very promising, with RMSE less than 2 K in all cases. The developed approach has therefore a high potential to be operationally used in the near future, exploiting the Copernicus Sentinel (2 and 3) observations, to provide high spatio-temporal resolution LST estimates in cities. [ABSTRACT FROM AUTHOR]

Cloud property data sets derived from passive sensors onboard the polar orbiting satellites (such as the NOAA's Advanced Very High Resolution Radiometer) have global coverage and now span a climatological time period. Synoptic surface observations (SYNOP) are often used to characterize the accuracy of satellite-based cloud cover. Infrequent overpasses of polar orbiting satellites combined with the 3- or 6-h SYNOP frequency lead to collocation time differences of up to 3 h. The associated collocation error degrades the cloud cover performance statistics such as the Hanssen-Kuiper's discriminant (HK) by up to 45%. Limiting the time difference to 10 min, on the other hand, introduces a sampling error due to a lower number of corresponding satellite and SYNOP observations. This error depends on both the length of the validated time series and the SYNOP frequency. The trade-off between collocation and sampling error call for an optimum collocation time difference. It however depends on cloud cover characteristics and SYNOP frequency, and cannot be generalized. Instead, a method is presented to reconstruct the unbiased (true) HK from HK affected by the collocation differences, which significantly (t-test p < 0.01) improves the validation results. [ABSTRACT FROM AUTHOR]

The U.S. National Oceanic and Atmospheric Administration (NOAA) Coral Reef Watch (CRW) program has developed a daily global 5-km product suite based on satellite observations to monitor thermal stress on coral reefs. These products fulfill requests from coral reef managers and researchers for higher resolution products by taking advantage of new satellites, sensors and algorithms. Improvements of the 5-km products over CRW's heritage global 50-km products are derived from: (1) the higher resolution and greater data density of NOAA's next-generation operational daily global 5-km geo-polar blended sea surface temperature (SST) analysis; and (2) implementation of a new SST climatology derived from the Pathfinder SST climate data record. The new products increase near-shore coverage and now allow direct monitoring of 95% of coral reefs and significantly reduce data gaps caused by cloud cover. The 5-km product suite includes SST Anomaly, Coral Bleaching HotSpots, Degree Heating Weeks and Bleaching Alert Area, matching existing CRW products. When compared with the 50-km products and in situ bleaching observations for 2013-2014, the 5-km products identified known thermal stress events and matched bleaching observations. These near reef-scale products significantly advance the ability of coral reef researchers and managers to monitor coral thermal stress in near-real-time. [ABSTRACT FROM AUTHOR]

Land cover is one of the essential climate variables of the ESA Climate Change Initiative (CCI). In this context, the Land Cover CCI (LC CCI) project aims at building global land cover maps suitable for climate modeling based on Earth observation by satellite sensors. The challenge is to generate a set of successive maps that are both accurate and consistent over time. To do so, operational methods for the automated classification of optical images are investigated. The proposed approach consists of a locally trained classification using an automated selection of training samples from existing, but outdated land cover information. Combinations of local extraction (based on spatial criteria) and self-cleaning of training samples (based on spectral criteria) are quantitatively assessed. Two large study areas, one in Eurasia and the other in South America, are considered. The proposed morphological cleaning of the training samples leads to higher accuracies than the statistical outlier removal in the spectral domain. An optimal neighborhood has been identified for the local sample extraction. The results are coherent for the two test areas, showing an improvement of the overall accuracy compared with the original reference datasets and a significant reduction of macroscopic errors. More importantly, the proposed method partly controls the reliability of existing land cover maps as sources of training samples for supervised classification. [ABSTRACT FROM AUTHOR]

Land cover is one of the essential climate variables of the ESA Climate Change Initiative (CCI). In this context, the Land Cover CCI (LC CCI) project aims at building global land cover maps suitable for climate modeling based on Earth observation by satellite sensors. The challenge is to generate a set of successive maps that are both accurate and consistent over time. To do so, operational methods for the automated classification of optical images are investigated. The proposed approach consists of a locally trained classification using an automated selection of training samples from existing, but outdated land cover information. Combinations of local extraction (based on spatial criteria) and self-cleaning of training samples (based on spectral criteria) are quantitatively assessed. Two large study areas, one in Eurasia and the other in South America, are considered. The proposed morphological cleaning of the training samples leads to higher accuracies than the statistical outlier removal in the spectral domain. An optimal neighborhood has been identified for the local sample extraction. The results are coherent for the two test areas, showing an improvement of the overall accuracy compared with the original reference datasets and a significant reduction of macroscopic errors. More importantly, the proposed method partly controls the reliability of existing land cover maps as sources of training samples for supervised classification. [ABSTRACT FROM AUTHOR]

The European Space Agency project for studies of cloud properties in the Climate Change Initiative programme (ESA-CLOUD-CCI) aims at compiling the longest possible time series of cloud products from one single multispectral sensor-The five-channel Advanced Very High Resolution Radiometer (AVHRR) instrument. A particular aspect here is to include corresponding products based on other existing (Moderate Resolution Imaging Spectroradiometer (MODIS), Advanced Along-Track Scanning Radiometer (AATSR), MEdium Resolution Imaging Spectrometer (MERIS), Visible and Infrared Radiometer Suite (VIIRS)) and future Sea and Land Surface Temperature Radiometer (SLSTR) sensors measuring in similar (AVHRR-heritage) spectral channels. Initial inter-comparisons of the involved AVHRR-heritage channel radiances over a short demonstration period (2007-2009) were performed. Using Aqua-MODIS as reference, AVHRR (NOAA-18), AATSR, and MERIS channel radiances were evaluated using the simultaneous nadir (SNO) approach. Results show generally agreeing radiances within approximately 3% for channels at 0.6 μm and 0.8 μm. Larger deviations (+5%) were found for the corresponding AATSR channel at 0.6 μm. Excessive deviations but with opposite sign were also indicated for AATSR 1.6 μm and MERIS 0.8 μm radiances. Observed differences may largely be attributed to residual temporal and spatial matching differences while excessive AATSR and MERIS deviations are likely partly attributed to incomplete compensation for spectrally varying surface and atmospheric conditions. However, very good agreement was found for all infrared channels among all the studied sensors. Here, deviations were generally less than 0.2% for the measured brightness temperatures with the exception of some remaining non-linear deviations at extreme low and high temperatures. [ABSTRACT FROM AUTHOR]

Temporal stability, defined as the change of accuracy through time, is one of the validation aspects required by the Committee on Earth Observation Satellites' Land Product Validation Subgroup. Temporal stability was evaluated for three burned area products: MCD64, Globcarbon, and fire_cci. Traditional accuracy measures, such as overall accuracy and omission and commission error ratios, were computed from reference data for seven years (2001-2007) in seven study sites, located in Angola, Australia, Brazil, Canada, Colombia, Portugal, and South Africa. These accuracy measures served as the basis for the evaluation of temporal stability of each product. Nonparametric tests were constructed to assess different departures from temporal stability, specifically a monotonic trend in accuracy over time (Wilcoxon test for trend), and differences in median accuracy among years (Friedman test). When applied to the three burned area products, these tests did not detect a statistically significant temporal trend or significant differences among years, thus, based on the small sample size of seven sites, there was insufficient evidence to claim these products had temporal instability. Pairwise Wilcoxon tests comparing yearly accuracies provided a measure of the proportion of year-pairs with significant differences and these proportions of significant pairwise differences were in turn used to compare temporal stability between BA products. The proportion of year-pairs with different accuracy (at the 0.05 significance level) ranged from 0% (MCD64) to 14% (fire_cci), computed from the 21 year-pairs available. In addition to the analysis of the three real burned area products, the analyses were applied to the accuracy measures computed for four hypothetical burned area products to illustrate the properties of the temporal stability analysis for different hypothetical scenarios of change in accuracy over time. The nonparametric tests were generally successful at detecting the different types of temporal instability designed into the hypothetical scenarios. The current work presents for the first time methods to quantify the temporal stability of BA product accuracies and to alert product end-users that statistically significant temporal instabilities exist. These methods represent diagnostic tools that allow product users to recognize the potential confounding effect of temporal instability on analysis of fire trends and allow map producers to identify anomalies in accuracy over time that may lead to insights for improving fire products. Additionally, we suggest temporal instabilities that could hypothetically appear, caused by for example by failures or changes in sensor data or classification algorithms. [ABSTRACT FROM AUTHOR]

The Sentinel-2A and Sentinel-2B satellites, with on-board Multi-Spectral Instrument (MSI), and launched on 23 June 2015 and 7 March 2017, respectively, are very useful tools for studying ocean color, even if they were designed for land and vegetation applications. However, the use of these satellites requires a process called "atmospheric correction". This process aims to remove the contribution of the atmosphere from the total top of atmosphere reflectance measured by the remote sensors. For the purpose of assessing this processing, seven atmospheric correction algorithms have been compared over two French coastal regions (English Channel and French Guiana): Image correction for atmospheric effects (iCOR), Atmospheric correction for OLI 'lite' (ACOLITE), Case 2 Regional Coast Colour (C2RCC), Sentinel 2 Correction (Sen2Cor), Polynomial-based algorithm applied to MERIS (Polymer), the standard NASA atmospheric correction (NASA-AC) and the Ocean Color Simultaneous Marine and Aerosol Retrieval Tool (OC-SMART). The satellite-estimated remote-sensing reflectances were spatially and temporally matched with in situ measurements collected by an ASD FieldSpec4 spectrophotometer. Results, based on 28 potential individual match-ups, showed that the best performance processor is OC-SMART with the highest values for the total score Stot (16.89) and for the coefficient of correlation R2 (ranging from 0.69 at 443 nm to 0.92 at 665 nm). iCOR and Sen2Cor show the less accurate performances with total score Stot values of 2.01 and 7.70, respectively. Since the size of the in situ observation platform can be significant compared to the pixel resolution of MSI onboard Sentinel-2, it can create bias in the pixel extraction process. Thus, to study this impact, we used different methods of pixel extraction. However, there are no significant changes in results; some future research may be necessary. [ABSTRACT FROM AUTHOR]

Sea SurfaceTemperature (SST) is a critical parameter for monitoring the marine environment and understanding various ocean phenomena. While SST can be regularly retrieved from satellite data, it often suffers from missing data due to various reasons including cloud contamination. In this study, we proposed a novel two-step data fusion framework for generating high-resolution seamless daily SST from multi-satellite data sources. The proposed approach consists of (1) SST reconstruction based on Data Interpolate Convolutional AutoEncoder (DINCAE) using the SSTs derived from two satellite sensors (i.e., Moderate Resolution Imaging Spectroradiometer (MODIS) and Advanced Microwave Scanning Radiometer 2(AMSR2)), and (2) SST improvement through data fusion using random forest for consistency with in situ measurements with two schemes (i.e., scheme 1 using the reconstructed MODIS SST variables and scheme 2 using both MODIS and AMSR2 SST variables). The proposed approach was evaluated over the Kuroshio Extension in the Northwest Pacific, where a highly dynamic SST pattern can be found, from 2015 to 2019. The results showed that the reconstructed MODIS and AMSR2 SSTs through DINCAE yielded very good performance with Root Mean Square Errors (RMSEs) of 0.85 and 0.60 °C and Mean Absolute Errors (MAEs) of 0.59 and 0.45 °C, respectively. The results from the second step showed that scheme 2 and scheme 1 produced RMSEs of 0.75 and 0.98 °C and MAEs of 0.53 and 0.68 °C, respectively, compared to the in situ measurements, which proved the superiority of scheme 2 using multi-satellite data sources. Scheme 2 also showed comparable or even better performance than two operational SST products with similar spatial resolution. In particular, scheme 2 was good at simulating features with fine resolution (~50 km). The proposed approach yielded promising results over the study area, producing seamless daily SST products with high quality and high feature resolution. [ABSTRACT FROM AUTHOR]

Cloud recognition is a basic task in ground meteorological observation. It is of great significance to accurately identify cloud types from long-time-series satellite cloud images for improving the reliability and accuracy of weather forecasting. However, different from ground-based cloud images with a small observation range and easy operation, satellite cloud images have a wider cloud coverage area and contain more surface features. Hence, it is difficult to effectively extract the structural shape, area size, contour shape, hue, shadow and texture of clouds through traditional deep learning methods. In order to analyze the regional cloud type characteristics effectively, we construct a China region meteorological satellite cloud image dataset named CRMSCD, which consists of nine cloud types and the clear sky (cloudless). In this paper, we propose a novel neural network model, UATNet, which can realize the pixel-level classification of meteorological satellite cloud images. Our model efficiently integrates the spatial and multi-channel information of clouds. Specifically, several transformer blocks with modified self-attention computation (swin transformer blocks) and patch merging operations are used to build a hierarchical transformer, and spatial displacement is introduced to construct long-distance cross-window connections. In addition, we introduce a Channel Cross fusion with Transformer (CCT) to guide the multi-scale channel fusion, and design an Attention-based Squeeze and Excitation (ASE) to effectively connect the fused multi-scale channel information to the decoder features. The experimental results demonstrate that the proposed model achieved 82.33% PA, 67.79% MPA, 54.51% MIoU and 70.96% FWIoU on CRMSCD. Compared with the existing models, our method produces more precise segmentation performance, which demonstrates its superiority on meteorological satellite cloud recognition tasks. [ABSTRACT FROM AUTHOR]

Lake surface water temperature (LSWT) is sensitive to climate change. Previous studies have found that LSWT warming is occurring on a global scale and is expected to continue in the future. Recently, new global LSWT data products have been generated using satellite remote sensing, which provides an inimitable opportunity to study the LSWT response to global warming. Based on the satellite observations, we found that the warming rate of global lakes is uneven, with apparent regional differences. Indeed, comparing the LSWT warming in different climate zones (from arid to humid), the lakes in drylands experienced more significant warming (0.28 °C decade−1) than those in semi-humid and humid regions (0.19 °C decade−1) during previous decades (1995–2016). By further quantifying the impact factors, it showed that the LSWT warming is attributed to air temperature (74.4%), evaporation (4.1%), wind (9.9%), cloudiness (4.3%), net shortwave (3.1%), and net longwave (4.0%) over the lake surface. Air temperature is the main driving force for the warming of most global lakes, so the first estimate quantification of future LSWT trends can be determined from air temperature projections. By the end of the 21st century, the summer air temperature would warm up to 1.0 °C (SSP1-2.6) and 6.3 °C (SSP5-8.5) over lakes, with a more significant warming trend over the dryland lakes. Combined with their higher warming sensitivity, the excess summer LSWT warming in drylands is expected to continue, which is of great significance because of their high relevance in these water-limited regions. [ABSTRACT FROM AUTHOR]

The first full-mission global AVHRR FRAC sea surface temperature (SST) dataset with a nominal 1.1 km resolution at nadir was produced from three Metop First Generation (FG) satellites: Metop-A (2006-on), -B (2012-on) and -C (2018-on), using the NOAA Advanced Clear Sky Processor for Ocean (ACSPO) SST enterprise system. Historical reprocessing ('Reanalysis-1', RAN1) starts at the beginning of each mission and continues into near-real time (NRT). ACSPO generates two SST products, one with global regression (GR; highly sensitive to skin SST), and another one with piecewise regression (PWR; proxy for depth SST) algorithms. Small residual effects of orbital and sensor instabilities on SST retrievals are mitigated by retraining the regression coefficients daily, using matchups with drifting and tropical moored buoys within moving time windows. In RAN, the training windows are centered at the processed day. In NRT, the same size windows are employed but delayed in time, ending four to ten days prior to the processed day. Delayed-mode RAN reprocessing follows the NRT with a two-month lag, resulting in a higher quality and a more consistent SST record. In addition to its completeness, the newly created Metop-FG RAN1 SST dataset shows very close agreement with in situ data (including the fully independent Argo floats), well within the NOAA specifications for accuracy (global mean bias; ±0.2 K) and precision (global standard deviation; 0.6 K) in a ~20% clear-sky domain (percent of clear-sky SST pixels to the total of ice-free ocean). All performance statistics are stable in time, and consistent across the three platforms. The Metop-FG RAN1 data set is archived at the NASA JPL PO.DAAC and NOAA NCEI. This paper documents the newly created dataset and evaluates its performance. [ABSTRACT FROM AUTHOR]

This study was carried out using Moderate Resolution Imaging Spectroradiometer (MODIS) 1 km × 1 km resolution records on board Terra and Aqua satellites and in-situ measurements during the period (2003–2019). In spite of the presence of increasing atmospheric warming, in summer when evaporation is maximal, in fresh-water Lake Kinneret, satellite data revealed the absence of surface water temperature (SWT) trends. The absence of SWT trends in the presence of increasing atmospheric warming is an indication of the influence of increasing evaporation on SWT trends. The increasing water cooling, due to the above-mentioned increasing evaporation, compensated for increasing heating of surface water by regional atmospheric warming, resulting in the absence of SWT trends. In contrast to fresh-water Lake Kinneret, in the hypersaline Dead Sea, located ~100 km apart, MODIS records showed an increasing trend of 0.8 °C decade−1 in summer SWT during the same study period. The presence of increasing SWT trends in the presence of increasing atmospheric warming is an indication of the absence of steadily increasing evaporation in the Dead Sea. This is supported by a constant drop in Dead Sea water level at the rate of ~1 m/year from year to year during the last 25-year period (1995–2020). In summer, in contrast to satellite measurements, in-situ measurements of near-surface water temperature in Lake Kinneret showed an increasing trend of 0.7 °C  decade−1. [ABSTRACT FROM AUTHOR]

Envisat's MERIS and its successor Sentinel OLCI have proven invaluable for documenting algal bloom conditions in coastal and inland waters. Observations over turbid eutrophic waters, in particular, have benefited from the band at 708 nm, which captures the reflectance peak associated with intense algal blooms and is key to line-height algorithms such as the Maximum Chlorophyll Index (MCI). With the MERIS mission ending in early 2012 and OLCI launched in 2016, however, time-series studies relying on these two sensors have to contend with an observation gap spanning four years. Alternate sensors, such as MODIS Aqua, offering neither the same spectral band configuration nor consistent spatial resolution, present challenges in ensuring continuity in derived bloom products. This study explores a neural network (NN) solution to fill the observation gap between MERIS and OLCI with MODIS Aqua data, delivering consistent algal bloom spatial extent products from 2002 to 2020 using these three sensors. With 14 bands of MODIS level 2 partially atmospherically corrected spectral reflectance as the NN input, the missing MERIS/OLCI band at 708 nm required for the MCI is simulated. The resulting NN-derived MODIS MCI (NNMCI) is shown to be in good agreement with MERIS and OLCI MCI in 2011 and 2017 respectively over the western basin of Lake Erie (R2 = 0.84, RMSE = 0.0032). To overcome the impact of MODIS sensor saturation over bright water targets, which otherwise renders pixels unusable for bloom detection using R-NIR wavebands, a variant NN model is employed which uses the 9 MODIS bands with the lowest probability of saturation to simulate the MCI. This variant NN predicts MCI with only a small increase in uncertainty (R2 = 0.73, RMSE = 0.005) allowing reliable estimates of bloom conditions in those previously unreported pixels. The NNMCI is shown to be robust when applied beyond the initial training dataset on Lake Erie, and when re-trained on different geographic areas (Lake Winnipeg and Lake of the Woods). Despite differences in spatial, temporal, and spectral resolution, MODIS algal bloom presence/absence was correctly classified in >92% of cases and bloom spatial extent derived within 25% uncertainty, allowing the application to the 2012–2015 time period to form a continuous and consistent multi-mission monitoring dataset from 2002 to 2020. [ABSTRACT FROM AUTHOR]

Land surface temperature (LST) is an essential climate variable (ECV) for monitoring the Earth climate system. To ensure accurate retrieval from satellite data, it is important to validate satellite derived LSTs and ensure that they are within the required accuracy and precision thresholds. An emissivity-dependent split-window algorithm with viewing angle dependence and two dual-angle algorithms are proposed for the Sentinel-3 SLSTR sensor. Furthermore, these algorithms are validated together with the Sentinel-3 SLSTR operational LST product as well as several emissivity-dependent split-window algorithms with in-situ data from a rice paddy site. The LST retrieval algorithms were validated over three different land covers: flooded soil, bare soil, and full vegetation cover. Ground measurements were performed with a wide band thermal infrared radiometer at a permanent station. The coefficients of the proposed split-window algorithm were estimated using the Cloudless Land Atmosphere Radiosounding (CLAR) database: for the three surface types an overall systematic uncertainty (median) of −0.4 K and a precision (robust standard deviation) 1.1 K were obtained. For the Sentinel-3A SLSTR operational LST product, a systematic uncertainty of 1.3 K and a precision of 1.3 K were obtained. A first evaluation of the Sentinel-3B SLSTR operational LST product was also performed: systematic uncertainty was 1.5 K and precision 1.2 K. The results obtained over the three land covers found at the rice paddy site show that the emissivity-dependent split-window algorithms, i.e., the ones proposed here as well as previously proposed algorithms without angular dependence, provide more accurate and precise LSTs than the current version of the operational SLSTR product. [ABSTRACT FROM AUTHOR]

Surface albedo, defined as the ratio of the surface-reflected irradiance to the incident irradiance, is one of the parameters driving the Earth energy budget and it is for this reason an essential variable in climate studies. Instruments on geostationary satellites provide suitable observations allowing long-term monitoring of surface albedo from space. In 2012, EUMETSAT published Release 1 of the Meteosat Surface Albedo (MSA) data record. The main limitation effecting the quality of this release was non-removed clouds by the incorporated cloud screening procedure that caused too high albedo values, in particular for regions with permanent cloud coverage. For the generation of Release 2, the MSA algorithm has been replaced with the Geostationary Surface Albedo (GSA) one, able to process imagery from any geostationary imager. The GSA algorithm exploits a new, improved, cloud mask allowing better cloud screening, and thus fixing the major limitation of Release 1. Furthermore, the data record has an extended temporal and spatial coverage compared to the previous release. Both Black-Sky Albedo (BSA) and White-Sky Albedo (WSA) are estimated, together with their associated uncertainties. A direct comparison between Release 1 and Release 2 clearly shows that the quality of the retrieval improved significantly with the new cloud mask. For Release 2 the decadal trend is less than 1% over stable desert sites. The validation against Moderate Resolution Imaging Spectroradiometer (MODIS) and the Southern African Regional Science Initiative (SAFARI) surface albedo shows a good agreement for bright desert sites and a slightly worse agreement for urban and rain forest locations. In conclusion, compared with MSA Release 1, GSA Release 2 provides the users with a significantly more longer time range, reliable and robust surface albedo data record. [ABSTRACT FROM AUTHOR]

Inland open water bodies often pose a systematic error source in the passive remote sensing retrievals of soil moisture. Water temperature is a necessary variable used to compute water emissions that is required to be subtracted from satellite observation to yield actual emissions from the land portion, which in turn generates accurate soil moisture retrievals. Therefore, overestimation of soil moisture can often be corrected using concurrent water temperature data in the overall mitigation procedure. In recent years, several data sets of lake water temperature have become available, but their specifications and accuracy have rarely been investigated in the context of passive soil moisture remote sensing on a global scale. For this reason, three lake temperature products were evaluated against in-situ measurements from 2007 to 2011. The data sets include the lake surface water temperature (LSWT) from Global Observatory of Lake Responses to Environmental Change (GloboLakes), the Copernicus Global Land Operations Cryosphere and Water (C-GLOPS), as well as the lake mix-layer temperature (LMLT) from the European Centers for Medium-Range Weather Forecast (ECMWF) ERA5 Land Reanalysis. GloboLakes, C-GLOPS, and ERA5 Land have overall comparable performance with Pearson correlations (R) of 0.87, 0.92 and 0.88 in comparison with in-situ measurements. LSWT products exhibit negative median biases of −0.27 K (GloboLakes) and −0.31 K (C-GLOPS), whereas the median bias of LMLT is 1.56 K. When mapped from their respective native resolutions to a common 9 km Equal-Area Scalable Earth (EASE) Grid 2.0 projection, similar relative performance was observed. LMLT and LSWT data are closer in performance over the 9 km grid cells that exhibit a small range of lake cover fractions (0.05–0.5). Despite comparable relative performance, ERA5 Land shows great advantages in spatial coverage and temporal resolution. In summary, an integrated evaluation on data accuracy, long-term availability, global coverage, temporal resolution, and regular forward processing with modest data latency led us to conclude that LMLT from the ERA5 Land Reanalysis product represents the most optimal path for use in the development of a long-term soil moisture product. [ABSTRACT FROM AUTHOR]

This paper describes the Passive microwave Neural network Precipitation Retrieval algorithm for climate applications (PNPR-CLIM), developed with funding from the Copernicus Climate Change Service (C3S), implemented by ECMWF on behalf of the European Union. The algorithm has been designed and developed to exploit the two cross-track scanning microwave radiometers, AMSU-B and MHS, towards the creation of a long-term (2000–2017) global precipitation climate data record (CDR) for the ECMWF Climate Data Store (CDS). The algorithm has been trained on an observational dataset built from one year of MHS and GPM-CO Dual-frequency Precipitation Radar (DPR) coincident observations. The dataset includes the Fundamental Climate Data Record (FCDR) of AMSU-B and MHS brightness temperatures, provided by the Fidelity and Uncertainty in Climate data records from Earth Observation (FIDUCEO) project, and the DPR-based surface precipitation rate estimates used as reference. The combined use of high quality, calibrated and harmonized long-term input data (provided by the FIDUCEO microwave brightness temperature Fundamental Climate Data Record) with the exploitation of the potential of neural networks (ability to learn and generalize) has made it possible to limit the use of ancillary model-derived environmental variables, thus reducing the model uncertainties' influence on the PNPR-CLIM, which could compromise the accuracy of the estimates. The PNPR-CLIM estimated precipitation distribution is in good agreement with independent DPR-based estimates. A multiscale assessment of the algorithm's performance is presented against high quality regional ground-based radar products and global precipitation datasets. The regional and global three-year (2015–2017) verification analysis shows that, despite the simplicity of the algorithm in terms of input variables and processing performance, the quality of PNPR-CLIM outperforms NASA GPROF in terms of rainfall detection, while in terms of rainfall quantification they are comparable. The global analysis evidences weaknesses at higher latitudes and in the winter at mid latitudes, mainly linked to the poorer quality of the precipitation retrieval in cold/dry conditions. [ABSTRACT FROM AUTHOR]

The microclimatic conditions of the urban environment influence significantly the thermal comfort of human beings. One of the main human biometeorology parameters of thermal comfort is the Mean Radiant Temperature (Tmrt), which quantifies effective radiative flux reaching a human body. Simulation tools have proven useful to analyze the radiative behavior of an urban space and its impact on the inhabitants. We present a new method to produce detailed modeling of Tmrt spatial distribution using the 3-D Discrete Anisotropic Radiation Transfer model (DART). Our approach is capable to simulate Tmrt at different scales and under a range of parameters including the urban pattern, surface material of ground, walls, roofs, and properties of the vegetation (coverage, shape, spectral signature, Leaf Area Index and Leaf Area Density). The main advantages of our method are found in (1) the fine treatment of radiation in both short-wave and long-wave domains, (2) detailed specification of optical properties of urban surface materials and of vegetation, (3) precise representation of the vegetation component, and (4) capability to assimilate 3-D inputs derived from multisource remote sensing data. We illustrate and provide a first evaluation of the method in Singapore, a tropical city experiencing strong Urban Heat Island effect (UHI) and seeking to enhance the outdoor thermal comfort. The comparison between DART modelled and field estimated Tmrt shows good agreement in our study site under clear-sky condition over a time period from 10:00 to 19:00 (R2 = 0.9697, RMSE = 3.3249). The use of a 3-D radiative transfer model shows promising capability to study urban microclimate and outdoor thermal comfort with increasing landscape details, and to build linkage to remote sensing data. Our methodology has the potential to contribute towards optimizing climate-sensitive urban design when combined with the appropriate tools. [ABSTRACT FROM AUTHOR]

Remotely sensed-based surface temperature is an important tool for crop monitoring and has great potential for improving irrigation management. However, current thermal satellite platforms do not display the fine spatial resolution required for identifying crop water status patterns at the field scale. The thermal sharpening (TsHARP) utility provides a technique for downscaling coarse thermal images to match the finer resolution of images acquired in the visible and near infrared bandwidths. This sharpening method is based on the inverse linear relationship between vegetation fraction calculated from the normalized difference vegetation index (NDVI) and land surface temperature (LST). The current study used the TsHARP method to sharpen low-resolution thermal data from the Moderate Resolution Imaging Spectrometer MODIS (1 km) to the finer resolution of Sentinel-2 (10 m) and Vegetation and Environment New micro-Spacecraft (VENµS) (5 m) visible-near infrared images. The sharpening methodology was evaluated at scene and field scales in southern Georgia and northern Mississippi, USA. A comparison of sharpened temperature was made with reference temperatures from Landsat-8 Operational Land Imager (OLI) in four different spatial resolutions (30, 60, 120, and 240 m) for method validation. Coarse resolution comparison on the dates in which imagery from both sensors were acquired on the same day resulted in average observed mean absolute error (MAE) of 1.63 °C, and R2 variation from 0.34 to 0.74. Temperature errors at the field scale ranged from 0.25 to 3.11 °C using both Sentinel-2 and VENµS. Sharpened maps at 120 and 60 m resolution showed the highest consistency for all fields and dates. Maps sharpened using VENµS images showed comparable or higher accuracy than maps sharpened using Sentinel-2. The superior performance coupled with the better revisit time indicates that the VENµS platform has high potential for frequent in-season crop monitoring. Further research with ground data collection is needed to explore field use limitations of this methodology, but these results give useful insights of potential benefits of implementing the TsHARP technique as a tool for crop stress monitoring. [ABSTRACT FROM AUTHOR]

The accuracy and precision of satellite sea surface temperature (SST) products in nearshore coastal waters are not well known, owing to a lack of in-situ data available for validation. It has been suggested that recreational watersports enthusiasts, who immerse themselves in nearshore coastal waters, be used as a platform to improve sampling and fill this gap. One tool that has been used worldwide by surfers is the Smartfin, which contains a temperature sensor integrated into a surfboard fin. If tools such as the Smartfin are to be considered for satellite validation work, they must be carefully evaluated against state-of-the-art techniques to quantify data quality. In this study, we developed a Simple Oceanographic floating Device (SOD), designed to float on the ocean surface, and deployed it during the 28th Atlantic Meridional Transect (AMT28) research cruise (September and October 2018). We attached a Smartfin to the underside of the SOD, which measured temperature at a depth of ∼0.1 m, in a manner consistent with how it collects data on a surfboard. Additional temperature sensors (an iButton and a TidbiT v2), shaded and positioned a depth of ∼1 m, were also attached to the SOD at some of the stations. Four laboratory comparisons of the SOD sensors (Smartfin, iButton and TidbiT v2) with an accurate temperature probe (±0.0043 K over a range of 273.15 to 323.15 K) were also conducted during the AMT28 voyage, over a temperature range of 290–309 K in a recirculating water bath. Mean differences (δ), referenced to the temperature probe, were removed from the iButton ( δ = 0.292 K) and a TidbiT v2 sensors ( δ = 0.089 K), but not from the Smartfin, as it was found to be in excellent agreement with the temperature probe ( δ = 0.005 K). The SOD was deployed for 20 min periods at 62 stations (predawn and noon) spanning 100 degrees latitude and a gradient in SST of 19 K. Simultaneous measurements of skin SST were collected using an Infrared Sea surface temperature Autonomous Radiometer (ISAR), a state-of-the-art instrument used for satellite validation. Additionally, we extracted simultaneous SST measurements, collected at slightly different depths, from an underway conductivity, temperature and depth (CTD) system. Over all 62 stations, the mean difference (δ) and mean absolute difference (ϵ) between Smartfin and the underway CTD were −0.01 and 0.06 K respectively (similar results obtained from comparisons between Smartfin and iButton and Smartfin and TidbiT v2), and the δ and ϵ between Smartfin and ISAR were 0.09 and 0.12 K respectively. In both comparisons, statistics varied between noon and predawn stations, with differences related to environmental variability (wind speed and sea-air temperature differences) and depth of sampling. Our results add confidence to the use of Smartfin as a citizen science tool for evaluating satellite SST data, and data collected using the SOD and ISAR were shown to be useful for quantifying near-surface temperature gradients. [ABSTRACT FROM AUTHOR]