Search

Evapotranspiration (ET) is a very important variable in the global water cycle, carbon cycle, and energy cycle. However, there are still some uncertainties in existing ET products. Therefore, this paper evaluates the uncertainty of three widely used global ET products (ERA5-Land, GLDAS-Noah, and MERRA-2) based on the three-cornered hat (TCH) method, and generates a new ET product based on this. The new product is a long-series global monthly ET dataset with a spatial resolution of 0.25° × 0.25° and a time span of 21 years. The results show that ERA5-Land (8.46 mm/month) has the lowest uncertainty among the three ET products, followed by GLDAS-Noah (8.81 mm/month) and MERRA-2 (11.78 mm/month). The new product (TCH) captures ET trends in different regions as well as validating against in situ flux observations, and it exhibits better performance than the re-analysis dataset (ERA5-Land) in vegetation classifications such as evergreen needle-leaf forest, grassland, open shrubland, savanna, and woody savanna. The linear trend analysis of the new product shows a significant decreasing trend in south-eastern South America and southwestern parts of Africa, and an increasing trend in almost all other regions, including eastern North America, north-eastern South America, western Europe, north-central Africa, southern Asia, and south-eastern Oceania. [ABSTRACT FROM AUTHOR]

Clouds are key to understanding the atmosphere and climate, and a long series of satellite observations provide invaluable information to study their properties. EUMETSAT has published Release 1 of the Optimal Cloud Analysis (OCA) Climate Data Record (CDR), which provides a homogeneous time series of cloud properties of up to two overlapping layers, together with uncertainties. The OCA product is derived using the 15 min Spinning Enhanced Visible and Infrared Imager (SEVIRI) measurements onboard Meteosat Second Generation (MSG) in geostationary orbit and covers the period from 19 January 2004 until 31 August 2019. This paper presents the validation of the OCA cloud-top pressure (CTP) against independent lidar-based estimates and the quality assessment of the cloud optical thickness (COT) and cloud particle effective radius (CRE) against a combination of products from satellite-based active and passive instruments. The OCA CTP is in good agreement with the CTP sensed by lidar for low thick liquid clouds and substantially below in the case of high ice clouds, in agreement with previous studies. The retrievals of COT and CRE are more reliable when constrained by solar channels and are consistent with other retrievals from passive imagers. The resulting cloud properties are stable and homogeneous over the whole period when compared against similar CDRs from passive instruments. For CTP, the OCA CDR and the near-real-time OCA products are consistent, allowing for the use of OCA near-real time products to extend the CDR beyond August 2019. [ABSTRACT FROM AUTHOR]

Pansharpening, a pivotal task in remote sensing, involves integrating low-resolution multispectral images with high-resolution panchromatic images to synthesize an image that is both high-resolution and retains multispectral information. These pansharpened images enhance precision in land cover classification, change detection, and environmental monitoring within remote sensing data analysis. While deep learning techniques have shown significant success in pansharpening, existing methods often face limitations in their evaluation, focusing on restricted satellite data sources, single scene types, and low-resolution images. This paper addresses this gap by introducing PanBench, a high-resolution multi-scene dataset containing all mainstream satellites and comprising 5898 pairs of samples. Each pair includes a four-channel (RGB + near-infrared) multispectral image of 256 × 256 pixels and a mono-channel panchromatic image of 1024 × 1024 pixels. To avoid irreversible loss of spectral information and achieve a high-fidelity synthesis, we propose a Cascaded Multiscale Fusion Network (CMFNet) for pansharpening. Multispectral images are progressively upsampled while panchromatic images are downsampled. Corresponding multispectral features and panchromatic features at the same scale are then fused in a cascaded manner to obtain more robust features. Extensive experiments validate the effectiveness of CMFNet. [ABSTRACT FROM AUTHOR]

Change detection (CD) is an important remote sensing (RS) data analysis technology. Existing remote sensing change detection (RS-CD) technologies cannot fully consider situations where pixels between bitemporal images do not correspond well on a one-to-one basis due to factors such as seasonal changes and lighting conditions. Existing networks construct two identical feature extraction branches through convolution, which share weights. The two branches work independently and do not merge until the feature mapping is sent to the decoder head. This results in a lack of feature information interaction between the two images. So, directing attention to the change area is of research interest. In complex backgrounds, the loss of edge details is very important. Therefore, this paper proposes a new CD algorithm that extracts multi-scale feature information through the backbone network in the coding stage. According to the task characteristics of CD, two submodules (the Feature Interaction Module and Detail Feature Guidance Module) are designed to make the feature information between the bitemporal RS images fully interact. Thus, the edge details are restored to the greatest extent while fully paying attention to the change areas. Finally, in the decoding stage, the feature information of different levels is fully used for fusion and decoding operations. We build a new CD dataset to further verify and test the model's performance. The generalization and robustness of the model are further verified by using two open datasets. However, due to the relatively simple construction of the model, it cannot handle the task of multi-classification CD well. Therefore, further research on multi-classification CD algorithms is recommended. Moreover, due to the high production cost of CD datasets and the difficulty in obtaining them in practical tasks, future research will look into semi-supervised or unsupervised related CD algorithms. [ABSTRACT FROM AUTHOR]

The Landsat and Sentinel series satellites contain their own quality tagging data products, marking the source image pixel by pixel with several specific semantic categories. These data products generally contain categories such as cloud, cloud shadow, land, water body, and snow. Due to the lack of mid-wave and thermal infrared bands, the accuracy of traditional cloud detection algorithm is unstable when facing Chinese Gaofen-1/6 (GF-1/6) data. Moreover, it is challenging to distinguish clouds from snow. In order to produce GF-1/6 satellite pixel-by-pixel quality tagging data products, this paper builds a training sample set of more than 100,000 image pairs, primarily using Sentinel-2 satellite data. Then, we adopt the Swin Transformer model with a self-attention mechanism for GF-1/6 satellite image quality tagging. Experiments show that the model's overall accuracy reaches the level of Fmask v4.6 with more than 10,000 training samples, and the model can distinguish between cloud and snow correctly. Our GF-1/6 quality tagging algorithm can meet the requirements of the "Analysis Ready Data (ARD) Technology Research for Domestic Satellite" project. [ABSTRACT FROM AUTHOR]

The Landsat 8 and 9 Underfly Event occurred in November 2021, during which Landsat 9 flew beneath Landsat 8 in the final stages before settling in its final orbiting path. An analysis was performed on the images taken during this event, which resulted in a cross-calibration with uncertainties estimated to be less than 0.5%. This level of precision was due, in part, to the near-identical sensors aboard each instrument, as well as the underfly event itself, which allowed the sensors to take nearly the exact same image at nearly the exact same time. This initial calibration was applied before the end of the on-orbit initial verification (OIV) period; this meant the analysis was performed in less than a month. While it was an effective and efficient first look at the data, a longer-term analysis was deemed prudent to obtain the most accurate cross-calibration with the smallest uncertainties. The three forms of uncertainty established in the initial analysis, dubbed "Phase 1", were geometric, spectral, and angular. This paper covers Phase 2 of the underfly analysis; several modifications were made to the Phase 1 process to improve the cross-calibration results, including a spectral correction in the form of a spectral band adjustment factor (SBAF) and a more robust filtering system that used the statistics of the reflectance data to better include important data compared to the more aggressive filters used in Phase 1. A proper uncertainty analysis was performed to more accurately quantify the uncertainty associated with the underfly cross-calibration. The results of Phase 2 showed that the Phase 1 analysis was within its 0.5% uncertainty estimation, and the cross-calibration gain values in this paper were used by USGS EROS to update the Landsat 9 calibration at the end of 2022. [ABSTRACT FROM AUTHOR]

ESA's Earth explorer mission CryoSat-2 has an ice-monitoring objective, but it has proven to also be a valuable source of observations for measuring impacts of climate change over oceans. In this paper, we report on our long-term ocean data analysis and validation and give our final words on CryoSat-2's Geophysical Ocean Products (GOP) Baseline-C. The validation is based on a cross comparison with concurrent altimetry and with in situ tide gauges. The highlights of our findings include GOP Baseline-C showing issues with the ionosphere and pole tide correction. The latter gives rise to an east–west pattern in range bias. Between Synthetic Aperture Radar (SAR) and Low-Resolution Mode (LRM), a 1.4 cm jump in range bias is explained by a 0.5 cm jump in sea state bias, which relates to a significant wave height SAR-LRM jump of 10.5 cm. The remaining 0.9 cm is due to a range bias between ascending and descending passes, exhibiting a clear north–south pattern and ascribed to a timing bias of +0.367 ms, affecting both time-tag and elevation. The overall range bias of GOP Baseline-C is established at −2.9 cm, referenced to all calibrated concurrent altimeter missions. The bias drift does not exceed 0.2 mm/yr, leading to the conclusion that GOP Baseline-C is substantially stable and measures up to the altimeter reference missions. This is confirmed by tide gauge comparison with a selected set of 309 PSMSL tide gauges over 2010–2022: we determined a correlation of R = 0.82, a mean standard deviation of σ = 5.7 cm (common reference and GIA corrected), and a drift of 0.17 mm/yr. In conclusion, the quality, continuity, and reference of GOP Baseline-C is exceptionally good and stable over time, and no proof of any deterioration or platform aging has been found. Any improvements for the next CryoSat-2 Baselines could come from sea state bias optimization, ionosphere and pole tide correction improvement, and applying a calibrated value for any timing biases. [ABSTRACT FROM AUTHOR]

In order to further promote the accuracy of state estimation and track extraction capabilities for multi-target tracking, a sequential joint state estimation and track extraction algorithm is proposed in this article. This algorithm is based on backward smoothing under the framework of Labeled Random Finite Set and utilizes label iterative processing to perform outlier removal, invalid short-lived track removal, and track continuity processing in a sequential manner in order to achieve the goal of improving the multi-target tracking performance of the algorithm. Finally, this paper verifies through experimental simulation and measured data analysis that the proposed algorithm has improved the performance of radar multi-target tracking to a certain extent. [ABSTRACT FROM AUTHOR]

The problem of accurately measuring the motion parameters of low radar cross-section (RCS) maneuvering targets has long been a hurdle in the radar technology landscape. Small targets, due to their elusive characteristics, are particularly difficult to detect with conventional radar systems. In this paper, we investigate the capabilities of dechirp-receiving stepped-frequency radar, a modern system using a linear frequency modulation signal for downconversion. This permits the radar to function at reduced sampling rates while maintaining the transmission of large-bandwidth signals and achieving synthetic imaging. Our primary contribution is introducing the stepped dechirp generalized Radon–Fourier transform (stepped DGRFT) algorithm. This novel approach allows the radar system to perform coherent accumulation, enhancing the accuracy of motion parameter estimates for low-RCS maneuvering targets. Results from our simulations and measured data analysis validate the effectiveness of our proposed algorithm, demonstrating its superiority over other methods. [ABSTRACT FROM AUTHOR]

Homogenization is an important and crucial step to improve the usage of observational data for climate analysis. This work is motivated by the analysis of long series of GNSS Integrated Water Vapour (IWV) data, which have not yet been used in this context. This paper proposes a novel segmentation method called segfunc that integrates a periodic bias and a heterogeneous, monthly varying, variance. The method consists in estimating first the variance using a robust estimator and then estimating the segmentation and periodic bias iteratively. This strategy allows for the use of the dynamic programming algorithm, which is the most efficient exact algorithm to estimate the change point positions. The performance of the method is assessed through numerical simulation experiments. It is implemented in the R package GNSSseg, which is available on the CRAN. This paper presents the application of the method to a real data set from a global network of 120 GNSS stations. A hit rate of 32% is achieved with respect to available metadata. The final segmentation is made in a semi-automatic way, where the change points detected by three different penalty criteria are manually selected. In this case, the hit rate reaches 60% with respect to the metadata. [ABSTRACT FROM AUTHOR]

Integrating Artificial Intelligence (AI) techniques with remote sensing holds great potential for revolutionizing data analysis and applications in many domains of Earth sciences. This review paper synthesizes the existing literature on AI applications in remote sensing, consolidating and analyzing AI methodologies, outcomes, and limitations. The primary objectives are to identify research gaps, assess the effectiveness of AI approaches in practice, and highlight emerging trends and challenges. We explore diverse applications of AI in remote sensing, including image classification, land cover mapping, object detection, change detection, hyperspectral and radar data analysis, and data fusion. We present an overview of the remote sensing technologies, methods employed, and relevant use cases. We further explore challenges associated with practical AI in remote sensing, such as data quality and availability, model uncertainty and interpretability, and integration with domain expertise as well as potential solutions, advancements, and future directions. We provide a comprehensive overview for researchers, practitioners, and decision makers, informing future research and applications at the exciting intersection of AI and remote sensing. [ABSTRACT FROM AUTHOR]

Limited by the existing imagery sensors, a hyperspectral image (HSI) is characterized by its high spectral resolution but low spatial resolution. HSI super-resolution (SR) aims to enhance the spatial resolution of the HSIs without modifying the equipment and has become a hot issue for HSI processing. In this paper, inspired by two important observations, a gated content-oriented residual dense network (GCoRDN) is designed for the HSI SR. To be specific, based on the observation that the structure and texture exhibit different sensitivities to the spatial degradation, a content-oriented network with two branches is designed. Meanwhile, a weight-sharing strategy is merged in the network to preserve the consistency in the structure and the texture. In addition, based on the observation of the super-resolved results, a gating mechanism is applied as a form of post-processing to further enhance the SR performance. Experimental results and data analysis on both ground-based HSIs and airborne HSIs have demonstrated the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The harmonic constants of long-period tidal constituents are critical for simulating the tide process, obtaining theoretical datum sounding reduction, and conducting further ocean research. In this paper, the equidistant node orthogonal polynomial fitting (ENOPF) method is employed to fit the harmonic constants of the T/P satellite altimeter data and the gridded altimeter data from the Data Unification and Altimeter Combination System (DUACS) to obtain the full-field harmonic constants of the long-period tidal constituents (Sa and Ssa) in the Bohai Sea, Yellow Sea, and East China Sea (BYECS). To verify the validity of the ENOPF method, the long-period tidal harmonic constants of the ENOPF method, the Finite Element Solutions 2014 (FES2014) model, the Empirical Ocean Tide 20 (EOT20) model, and the DUACS data were compared with the observations of the X-TRACK products and the tide gauges. In addition, the root-mean-square errors (RMSEs), amplitude differences ( Δ H ), and phase-lag differences ( Δ G ) of the comparison results were calculated. According to the error analysis and the cotidal charts, the ENOPF method is better than the other three methods or models for comparing tide gauges (6.19 cm, 5.85 cm, 25.44°; 1.10 cm, 0.72 cm, 59.09°, respectively. The cotidal charts obtained by the ENOPF method are smoother and have better consistency with the actual track data. The results indicate that, due to the polynomial fitting method adopted in ENOPF method, which has the characteristics of improving the resolution infinitely, it is easier to obtain the harmonic constant of full field than with other models or methods. This study proves that the ENOPF method is a reasonable and simple tool in extracting the harmonic constants of the BYECS. [ABSTRACT FROM AUTHOR]

FY-3E WindRAD (Fengyun-3E Wind Radar) is a dual-frequency rotating fan-beam scatterometer. Its data characteristics, NOC (NWP Ocean Calibration), and wind retrieval performance are investigated in this paper. The diversity of the radar view geometry varies across the swaths, with maximum diversity in the sweet swaths and limited diversity in the outer and nadir swaths. When NOC backscatter calibration coefficients are computed as a function of incidence angle only (NOCint), a smooth correction is found. However, when relative antenna azimuth angle is included (NOCant), it appears that the corrections as a function of relative azimuth angle vary harmonically and substantially for a specific incidence angle. NOCant corrections yield a better fit of the measurements to the GMF (Geophysical Model Function). Hence, NOCant is applied for the analysis of wind retrieval from the Ku-band and C-band. An extra engineering correction of 0.15 dB and 0.20 dB is applied on Ku-band and C-band backscatter values, respectively, to reduce the wind speed bias without increasing the standard deviation. Overall, NOCant is the best option for both channels. In addition, the instrument backscatter data stability over time is good, and the retrieved winds can fulfill operational requirements. [ABSTRACT FROM AUTHOR]

The SHAllow RADar (SHARAD) onboard Mars Reconnaissance Orbiter (MRO) is a 20 MHz Synthetic Aperture Radar (SAR) that probes the first hundreds of meters of the Martian subsurface. In order to interpret the detection of subsurface interfaces with ground penetrating radars, simulations using Digital Terrain Models (DTM) are necessary. This methodology paper focuses on the analysis of the first tens of meters of the Martian subsurface with SHARAD, comparing the use of different high-resolution DTMs for radar simulation, namely, from the High-Resolution Stereo Camera (HRSC) onboard the Mars Express and from the Context Camera (CTX) onboard MRO. The region of Terra Cimmeria was chosen as a demonstration area. It is a highly cratered southern midlatitude region, where, as will be discussed, the higher resolution of the aforementioned terrain models is mandatory to describe the surface at an acceptable level of detail for shallow subsurface radar interpretation. With a DTM corrected by photoclinometry using CTX imagery, we show that a reflector that was visible on SHARAD data but not on the simulation made with an HRSC DTM is, in fact, a surface echo that was not reproduced by the HRSC surface model. We also show that, unlike laser altimetry DTMs, optical DTMs are prone to artifacts that can make radar analysis more complicated for some scenarios. Reciprocally, we show that the comparison between radar and its corresponding simulated data is a way of assessing a DTM's quality, which is especially useful in missions where ground control points are lacking, unlike Martian observations. [ABSTRACT FROM AUTHOR]

When a large-scale flood disaster occurs, it is important to identify the flood areas in a short time in order to effectively support the affected areas afterwards. Synthetic Aperture Radar (SAR) is promising for flood detection. A number of change detection methods have been proposed to detect flooded areas with pre- and post-event SAR data. However, it remains difficult to detect flooded areas in built-up areas due to the complicated scattering of microwaves. To solve this issue, in this paper we propose the idea of analyzing the local changes in pre- and post-event SAR data as well as the larger-scale changes, which may improve accuracy for detecting floods in built-up areas. Therefore, we aimed at evaluating the effectiveness of multi-scale SAR analysis for flood detection in built-up areas using ALOS-2/PALSAR-2 data. First, several features were determined by calculating standard deviation images, difference images, and correlation coefficient images with several sizes of kernels. Then, segmentation on both small and large scales was applied to the correlation coefficient image and calculated explanatory variables with the features at each segment. Finally, machine learning models were tested for their flood detection performance in built-up areas by comparing a small-scale approach and multi-scale approach. Ten-fold cross-validation was used to validate the model, showing that highest accuracy was offered by the AdaBoost model, which improved the F1 Score from 0.89 in the small-scale analysis to 0.98 in the multi-scale analysis. The main contribution of this manuscript is that, from our results, it can be inferred that multi-scale analysis shows better performance in the quantitative detection of floods in built-up areas. [ABSTRACT FROM AUTHOR]

Gridded reanalysis data has been widely used in oceanic mesoscale eddy identification. However, there is little research on identifying oceanic mesoscale eddies based on along-track data. In this paper, the B-spline surface fitting model is established for oceanic mesoscale eddy identification. This innovative model can embody along-track data's advantages in accuracy, universality, and instantaneity, and directly identify oceanic mesoscale eddies solely based on along-track data. We start with ideal experiments using simulated data to explore the error sources of B-spline surface fitting for one oceanic mesoscale eddy, followed by practical experiments with measured data to analyze the effect of the B-spline surface fitting and the fitting errors further. Compared with eddies obtained from gridded reanalysis data, results show that the B-spline surface fitting model based on along-track data has an ideal effect in identifying oceanic mesoscale eddies; little difference exists between the fitting result and measured data. The model proposes a new technological means to deal with along-track data, which contributes to oceanic mesoscale eddy identification and marine element data analysis. [ABSTRACT FROM AUTHOR]

The received signal of passive radar based on mobile communication signals contains direct and multipath interference (DMI) signals from multiple co-channel base stations (CCBS). The direct signal spatial spectrum of each CCBS should be obtained first to eliminate the co-channel interference. The performance of the traditional spatial spectrum estimation algorithms based on uniform linear array (ULA) is related to the number of array elements. In the complex co-channel interference environment, the array requires an ultra-large number of array elements and the spatial spectrum estimation resolution is poor. This paper proposes a method for estimating the direct signal spatial spectrum of the CCBS by fusing coprime array and compressive sensing. Firstly, an augmented virtual array signal is constructed by using the second-order statistics of the received signals of the coprime array and then the compressive sensing algorithm is used to estimate the spatial spectrum of the direct signal of the CCBS. The proposed method can achieve higher resolution and higher-degrees-of-freedom (DOFs) performance than traditional ULA by using the same number of array elements. The effectiveness of the proposed method is verified by numerical simulation analysis and experimental data. [ABSTRACT FROM AUTHOR]

When the BepiColombo spacecraft arrives at Mercury in late 2025, it will be able to measure the orbit of the planet with unprecedented accuracy, allowing for more accurate measurements of the perihelion advance of the planet, as predicted by the Theory of General Relativity (GR). A similar effect is produced by the gravitational oblateness of the Sun through the zonal coefficient J 2 ⊙ . The gravitational field of the Sun has been hard to determine despite centuries of observations, causing great uncertainties in experiments on GR. Recent publications in heliophysics suggest that J 2 ⊙ is not a constant, but a dynamic value that varies with solar magnetic activity. The aim of this paper is to analyse what the effect is of suggested higher-order effects of the solar gravitational field on experiments of the perihelion advance of Mercury as predicted by GR. The orbit of Mercury and observations of the MESSENGER and BepiColombo spacecraft are simulated, and parameters corresponding to gravitational theory, as well as the oblateness J 2 ⊙ including a time-variable component are estimated using a least-squares approach. The result of the estimation is that the amplitude of a periodic component can be found with an uncertainty of 3.7 × 10 − 11 , equal to 0.017% the value of J 2 ⊙ . From analysis of published experiments that used MESSENGER tracking data, it can already be deduced that the amplitude of the periodic variation cannot be higher than 5% of the value of J 2 ⊙ . It is also found that if a periodic component exists with an amplitude greater than 0.04% the value of J 2 ⊙ and it is not considered, it can lead to errors in the experiments of GR using BepiColombo data to the point that results falsely confirm or contradict the Theory of General Relativity. [ABSTRACT FROM AUTHOR]

In a resource-constrained world, there is ongoing concern over the exploitation and potential future shortage of Earth's natural resources. In this paper, we present the results of two pilot studies in which we used drone technology with spatial mapping tools and environmental and economic analysis to map illegal waste sites. Besides the technical feasibility, we aimed at understanding the benefits, costs, and tradeoffs of extracting the materials stocked therein, transforming illegal waste sites into valuable resources. The innovation of our work is reflected in the integration of existing technologies for aerial mapping and economic\environmental assessment methodologies for promoting a local circular economy. The pilot results suggest that it is feasible to identify valuable materials left on the ground in the form of unattended, illegally disposed waste. Our initial national estimates for the illegal waste cleanup based on the pilot results suggest that the treatment cost in Israel can be reduced by 58 million USD and even reach zero, with the potential to generate up to 82.8 million USD profits. Finally, we link our results to the Sustainable Development Goals framework and suggest how mapping and implementing the recycling potential can promote achieving some of the goals. Our work provides missing data that the state, local authorities, contractors, and companies that monitor and manage waste and recycled raw materials may find useful. [ABSTRACT FROM AUTHOR]

Recently, deep learning-based classification approaches have made great progress and now dominate a wide range of applications, thanks to their Herculean discriminative feature learning ability. Despite their success, for hyperspectral data analysis, these deep learning based techniques tend to suffer computationally as the magnitude of the data soars. This is mainly because the hyperspectral imagery (HSI) data are multidimensional, as well as giving equal importance to the large amount of temporal and spatial information in the HSI data, despite the redundancy of information in the temporal and spatial domains. Consequently, in literature, this equal information emphasis has proven to affect the classification efficacy negatively in addition to increasing the computational time. As a result, this paper proposes a novel dual branch spatial-spectral attention based classification methodology that is computationally cheap and capable of selectively accentuating cardinal spatial and spectral features while suppressing less useful ones. The theory of feature extraction with 3D-convolutions alongside a gated mechanism for feature weighting using bi-directional long short-term memory is used as a spectral attention mechanism in this architecture. In addition, a union of 3D convolutional neural network (3D-CNN) and a residual network oriented spatial window-based attention mechanism is proposed in this work. To validate the efficacy of our proposed technique, the features collected from these spatial and spectral attention pipelines are transferred to a feed-forward neural network (FNN) for supervised pixel-wise classification of HSI data. The suggested spatial-spectral attention based hyperspectral data analysis and image classification methodology outperform other spatial-only, spectral-only, and spatial-spectral feature extraction based hyperspectral image classification methodologies when compared, according to experimental results. [ABSTRACT FROM AUTHOR]

Microwave remote sensing can measure surface geometry. Via the processing of the Synthetic Aperture Radar (SAR) data, the earth surface geometric parameters can be provided for geoscientific studies, especially in geological mapping. For this purpose, it is necessary to model the surface roughness against microwave signal backscattering. Of the available models, the Integral Equation Model (IEM) for co-polarized data has been the most frequently used model. Therefore, by the processing of the SAR data using this model, the surface geometry can be studied. In the IEM, the surface roughness geometry is calculable via the height statistical parameter, the rms-height. However, this parameter is not capable enough to represent surface morphology, since it only measures the surface roughness in the vertical direction, while the roughness dispersion on the surface is not included. In this paper, using the random fractal geometry capability, via the implementation of the power-law roughness spectrum, the precision and correctness of the surface roughness estimation has been improved by up to 10%. Therefore, the random fractal geometry is implemented through the calculation of the input geometric parameters of the IEM using the power-law surface spectrum and the spectral slope. In this paper, the in situ roughness measurement data, as well as SAR images at frequencies of L, C, and X, have been used to implement and evaluate the proposed method. Surface roughness, according to the operational frequencies, exhibits a fractal or a diffractal behavior. [ABSTRACT FROM AUTHOR]

Microseismic sensing taking advantage of sensors can remotely monitor seismic activities and evaluate seismic hazard. Compared with experts' seismic event clusters, clustering algorithms are more objective, and they can handle many seismic events. Many methods have been proposed for seismic event clustering and the K-means clustering technique has become the most famous one. However, K-means can be affected by noise events (large location error events) and initial cluster centers. In this paper, a data field-based K-means clustering methodology is proposed for seismicity analysis. The application of synthetic data and real seismic data have shown its effectiveness in removing noise events as well as finding good initial cluster centers. Furthermore, we introduced the time parameter into the K-means clustering process and applied it to seismic events obtained from the Chinese Yongshaba mine. The results show that the time-event location distance and data field-based K-means clustering can divide seismic events by both space and time, which provides a new insight for seismicity analysis compared with event location distance and data field-based K-means clustering. The Krzanowski-Lai (KL) index obtains a maximum value when the number of clusters is five: the energy index (EI) shows that clusters C1, C3 and C5 have very critical periods. In conclusion, the time-event location distance, and the data field-based K-means clustering can provide an effective methodology for seismicity analysis and hazard assessment. In addition, further study can be done by considering time-event location-magnitude distances. [ABSTRACT FROM AUTHOR]

In this paper, a new sliding window-based joint sparse representation (SWJSR) anomaly detector for hyperspectral data is proposed. The main contribution of this paper is to improve the judgments about the probability of anomaly presence in signals using the integration of information gathered during transition of sliding window for each pixel. In this method, each pixel experiences different spatial positions with respect to the spatial neighbors through the transition of this sliding window. In each position, an optimized local background dictionary is formed using a K-Singular Value Decomposition (K-SVD) algorithm and the recovery error of sparse estimation for each pixel is calculated using a simultaneous orthogonal matching pursuit algorithm (SOMP). Thus, the votes of each signal in terms of the anomaly presence in each spatial neighborhood are calculated and the variance of these recovery errors is considered as the detection criterion. The experimental results of the proposed SWJSR method on both synthetic and real datasets proved its higher performance compared to the Global RX (GRX), Local RX (LRX), Collaborative Representation Detector (CRD), Background Joint Sparse Representation (BJSR), Causal RX Detector (CR-RXD, CK-RXD), and Sliding Local RX(SLRX) detectors with an average efficiency improvement of about 7.5%, 14.25%, 8.2%, 8.25%, 6.45%, 6.5%, and 3.6%, respectively, in comparison to the mentioned algorithms. [ABSTRACT FROM AUTHOR]

Remote sensing images are often polluted by stripe noise, which leads to negative impact on visual performance. Thus, it is necessary to remove stripe noise for the subsequent applications, e.g., classification and target recognition. This paper commits to remove the stripe noise to enhance the visual quality of images, while preserving image details of stripe-free regions. Instead of solving the underlying image by variety of algorithms, we first estimate the stripe noise from the degraded images, then compute the final destriping image by the difference of the known stripe image and the estimated stripe noise. In this paper, we propose a non-convex l0 sparse model for remote sensing image destriping by taking full consideration of the intrinsically directional and structural priors of stripe noise, and the locally continuous property of the underlying image as well. Moreover, the proposed non-convex model is solved by a proximal alternating direction method of multipliers (PADMM) based algorithm. In addition, we also give the corresponding theoretical analysis of the proposed algorithm. Extensive experimental results on simulated and real data demonstrate that the proposed method outperforms recent competitive destriping methods, both visually and quantitatively. [ABSTRACT FROM AUTHOR]

Interests in synthetic aperture radar (SAR) data analysis is driven by the constantly increased spatial resolutions of the acquired images, where the geometries of scene objects can be better defined than in lower resolution data. This paper addresses the problem of the built-up areas extraction in high-resolution (HR) SAR images, which can provide a wealth of information to characterize urban environments. Strong backscattering behavior is one of the distinct characteristics of built-up areas in a SAR image. However, in practical applications, only a small portion of pixels characterizing the built-up areas appears bright. Thus, specific texture measures should be considered for identifying these areas. This paper presents a novel texture measure by combining the proposed labeled co-occurrence matrix technique with the specific spatial variability structure of the considered land-cover type in the fuzzy set theory. The spatial variability is analyzed by means of variogram, which reflects the spatial correlation or non-similarity associated with a particular terrain surface. The derived parameters from the variograms are used to establish fuzzy functions to characterize the built-up class and non built-up class, separately. The proposed technique was tested on TerraSAR-X images acquired of Nanjing (China) and Barcelona (Spain), and on a COSMO-SkyMed image acquired of Hangzhou (China). The obtained classification accuracies point out the effectiveness of the proposed technique in identifying and detecting built-up areas. [ABSTRACT FROM AUTHOR]

The Normalized Difference Vegetation Index (NDVI) time-series data derived from Advanced Very High Resolution Radiometer (AVHRR) have been extensively used for studying inter-annual dynamics of global and regional vegetation. However, there can be significant uncertainties in the data due to incomplete atmospheric correction and orbital drift of the satellites through their active life. Access to location specific quantification of uncertainty is crucial for appropriate evaluation of the trends and anomalies. This paper provides per pixel quantification of orbital drift related spurious trends in Long Term Data Record (LTDR) AVHRR NDVI data product. The magnitude and direction of the spurious trends was estimated by direct comparison with data from MODerate resolution Imaging Spectrometer (MODIS) Aqua instrument, which has stable inter-annual sun-sensor geometry. The maps show presence of both positive as well as negative spurious trends in the data. After application of the BRDF correction, an overall decrease in positive trends and an increase in number of pixels with negative spurious trends were observed. The mean global spurious inter-annual NDVI trend before and after BRDF correction was 0.0016 and -0.0017 respectively. The research presented in this paper gives valuable insight into the magnitude of orbital drift related trends in the AVHRR NDVI data as well as the degree to which it is being rectified by the MODIS BRDF correction algorithm used by the LTDR processing stream. [ABSTRACT FROM AUTHOR]

This paper is focused on spaceborne Differential Interferometric SAR (DInSAR) for land deformation measurement and monitoring. In the last two decades several DInSAR data analysis procedures have been proposed. The objective of this paper is to describe the DInSAR data processing and analysis tools developed at the Institute of Geomatics in almost ten years of research activities. Four main DInSAR analysis procedures are described, which range from the standard DInSAR analysis based on a single interferogram to more advanced Persistent Scatterer Interferometry (PSI) approaches. These different procedures guarantee a sufficient flexibility in DInSAR data processing. In order to provide a technical insight into these analysis procedures, a whole section discusses their main data processing and analysis steps, especially those needed in PSI analyses. A specific section is devoted to the core of our PSI analysis tools: the so-called 2+1D phase unwrapping procedure, which couples a 2D phase unwrapping, performed interferogram-wise, with a kind of 1D phase unwrapping along time, performed pixel-wise. In the last part of the paper, some examples of DInSAR results are discussed, which were derived by standard DInSAR or PSI analyses. Most of these results were derived from X-band SAR data coming from the TerraSAR-X and CosmoSkyMed sensors. [ABSTRACT FROM AUTHOR]

3D modeling of a given site is an important activity for a wide range of applications including urban planning, as-built mapping of industrial sites, heritage documentation, military simulation, and outdoor/indoor analysis of airflow. Point clouds, which could be either derived from passive or active imaging systems, are an important source for 3D modeling. Such point clouds need to undergo a sequence of data processing steps to derive the necessary information for the 3D modeling process. Segmentation is usually the first step in the data processing chain. This paper presents a region-growing multi-class simultaneous segmentation procedure, where planar, pole-like, and rough regions are identified while considering the internal characteristics (i.e., local point density/spacing and noise level) of the point cloud in question. The segmentation starts with point cloud organization into a kd-tree data structure and characterization process to estimate the local point density/spacing. Then, proceeding from randomly-distributed seed points, a set of seed regions is derived through distance-based region growing, which is followed by modeling of such seed regions into planar and pole-like features. Starting from optimally-selected seed regions, planar and pole-like features are then segmented. The paper also introduces a list of hypothesized artifacts/problems that might take place during the region-growing process. Finally, a quality control process is devised to detect, quantify, and mitigate instances of partially/fully misclassified planar and pole-like features. Experimental results from airborne and terrestrial laser scanning as well as image-based point clouds are presented to illustrate the performance of the proposed segmentation and quality control framework. [ABSTRACT FROM AUTHOR]

This paper aims to retrieve temporal high-resolution LAI derived by fusing MOD15 products (1 km resolution), field-measured LAI and ASTER reflectance (15-m resolution). Though the inversion of a physically based canopy reflectance model using high-resolution satellite data can produce high-resolution LAI products, the obstacle to producing temporal products is obvious due to the low temporal resolution of high resolution satellite data. A feasible method is to combine different source data, taking advantage of the spatial and temporal resolution of different sensors. In this paper, a high-resolution LAI retrieval method was implemented using a dynamic Bayesian network (DBN) inversion framework. MODIS LAI data with higher temporal resolution were used to fit the temporal background information, which is then updated by new, higher resolution data, herein ASTER data. The interactions between the different resolution data were analyzed from a Bayesian perspective. The proposed method was evaluated using a dataset collected in the HiWater (Heihe Watershed Allied Telemetry Experimental Research) experiment. The determination coefficient and RMSE between the estimated and measured LAI are 0.80 and 0.43, respectively. The research results suggest that even though the coarse-resolution background information differs from the high-resolution satellite observations, a satisfactory estimation result for the temporal high-resolution LAI can be produced using the accumulated information from both the new observations and background information. [ABSTRACT FROM AUTHOR]

A new supervised burned area mapping software named BAMS (Burned Area Mapping Software) is presented in this paper. The tool was built from standard ArcGISTM libraries. It computes several of the spectral indexes most commonly used in burned area detection and implements a two-phase supervised strategy to map areas burned between two Landsat multitemporal images. The only input required from the user is the visual delimitation of a few burned areas, from which burned perimeters are extracted. After the discrimination of burned patches, the user can visually assess the results, and iteratively select additional sampling burned areas to improve the extent of the burned patches. The final result of the BAMS program is a polygon vector layer containing three categories: (a) burned perimeters, (b) unburned areas, and (c) non-observed areas. The latter refer to clouds or sensor observation errors. Outputs of the BAMS code meet the requirements of file formats and structure of standard validation protocols. This paper presents the tool's structure and technical basis. The program has been tested in six areas located in the United States, for various ecosystems and land covers, and then compared against the National Monitoring Trends in Burn Severity (MTBS) Burned Area Boundaries Dataset. [ABSTRACT FROM AUTHOR]

Extracting digital elevation models (DTMs) from LiDAR data under forest canopy is a challenging task. This is because the forest canopy tends to block a portion of the LiDAR pulses from reaching the ground, hence introducing gaps in the data. This paper presents an algorithm for DTM extraction from LiDAR data under forest canopy. The algorithm copes with the challenge of low data density by generating a series of coarse DTMs by using the few ground points available and using trend surfaces to interpolate missing elevation values in the vicinity of the available points. This process generates a cloud of ground points from which the final DTM is generated. The algorithm has been compared to two other algorithms proposed in the literature in three different test sites with varying degrees of difficulty. Results show that the algorithm presented in this paper is more tolerant to low data density compared to the other two algorithms. The results further show that with decreasing point density, the differences between the three algorithms dramatically increased from about 0.5m to over 10m. [ABSTRACT FROM AUTHOR]

High-frequency surface wave radar (HFSWR) has been widely applied in sea-state monitoring, and its performance is known to suffer from various unwanted interferences and clutters. Radio frequency interference (RFI) from other radiating sources and ionospheric clutter dominate the various types of unwanted signals because the HF band is congested with many users and the ionosphere propagates interference from distant sources. In this paper, various orthogonal projection schemes are summarized, and three new schemes are proposed for interference cancellation. Simulations and field data recorded by experimental multi-frequency HFSWR fromWuhan University are used to evaluate the cancellation performances of these schemes with respect to both RFI and ionospheric clutter. The processing results may provide a guideline for identifying the appropriate orthogonal projection cancellation schemes in various HFSWR applications. [ABSTRACT FROM AUTHOR]

IEA Wind Task 32 exists to identify and mitigate barriers to the adoption of lidar for wind energy applications. It leverages ongoing international research and development activities in academia and industry to investigate site assessment, power performance testing, controls and loads, and complex flows. Since its initiation in 2011, Task 32 has been responsible for several recommended practices and expert reports that have contributed to the adoption of ground-based, nacelle-based, and floating lidar by the wind industry. Future challenges include the development of lidar uncertainty models, best practices for data management, and developing community-based tools for data analysis, planning of lidar measurements and lidar configuration. This paper describes the barriers that Task 32 identified to the deployment of wind lidar in each of these application areas, and the steps that have been taken to confirm or mitigate the barriers. Task 32 will continue to be a meeting point for the international wind lidar community until at least 2020 and welcomes old and new participants. [ABSTRACT FROM AUTHOR]

With success of Deep Belief Networks (DBNs) in computer vision, DBN has attracted great attention in hyperspectral classification. Many deep learning based algorithms have been focused on deep feature extraction for classification improvement. Multi-features, such as texture feature, are widely utilized in classification process to enhance classification accuracy greatly. In this paper, a novel hyperspectral classification framework based on an optimal DBN and a novel texture feature enhancement (TFE) is proposed. Through band grouping, sample band selection and guided filtering, the texture features of hyperspectral data are improved. After TFE, the optimal DBN is employed on the hyperspectral reconstructed data for feature extraction and classification. Experimental results demonstrate that the proposed classification framework outperforms some state-of-the-art classification algorithms, and it can achieve outstanding hyperspectral classification performance. Furthermore, our proposed TFE method can play a significant role in improving classification accuracy. [ABSTRACT FROM AUTHOR]

In synthetic aperture radar (SAR) target recognition, the amount of target data increases continuously, and thus SAR automatic target recognition (ATR) systems are required to provide updated feature models in real time. Most recent SAR feature extraction methods have to use both existing and new samples to retrain a new model every time new data is acquired. However, this repeated calculation of existing samples leads to an increased computing cost. In this paper, a dynamic feature learning method called incremental nonnegative matrix factorization with Lp sparse constraints (Lp-INMF) is proposed as a solution to that problem. In contrast to conventional nonnegative matrix factorization (NMF) whereby existing and new samples are computed to retrain a new model, incremental NMF (INMF) computes only the new samples to update the trained model incrementally, which can improve the computing efficiency. Considering the sparse characteristics of scattering centers in SAR images, we set the updating process under a generic sparse constraint (Lp) for matrix decomposition of INMF. Thus, Lp-INMF can extract sparse characteristics in SAR images. Experimental results using Moving and Stationary Target Acquisition and Recognition (MSTAR) benchmark data illustrate that the proposed Lp-INMF method can not only update models with new samples more efficiently than conventional NMF, but also has a higher recognition rate than NMF and INMF. [ABSTRACT FROM AUTHOR]

Due to strong improvements and developments achieved in the last decade, it is clear that applied research using remote sensing technology such as unmanned aerial vehicles (UAVs) can provide a flexible, efficient, non-destructive, and non-invasive means of acquiring geoscientific data, especially aerial imagery. Simultaneously, there has been an exponential increase in the development of sensors and instruments that can be installed in UAV platforms. By combining the aforementioned factors, unmanned aerial system (UAS) setups composed of UAVs, sensors, and ground control stations, have been increasingly used for remote sensing applications, with growing potential and abilities. This paper's overall goal is to identify advantages and challenges related to the use of UAVs for aerial imagery acquisition in forestry and coastal environments for preservation/prevention contexts. Moreover, the importance of monitoring these environments over time will be demonstrated. To achieve these goals, two case studies using UASs were conducted. The first focuses on phytosanitary problem detection and monitoring of chestnut tree health (Padrela region, Valpaços, Portugal). The acquired high-resolution imagery allowed for the identification of tree canopy cover decline by means of multi-temporal analysis. The second case study enabled the rigorous and non-evasive registry process of topographic changes that occurred in the sandspit of Cabedelo (Douro estuary, Porto, Portugal) in different time periods. The obtained results allow us to conclude that the UAS constitutes a low-cost, rigorous, and fairly autonomous form of remote sensing technology, capable of covering large geographical areas and acquiring high precision data to aid decision support systems in forestry preservation and coastal monitoring applications. Its swift evolution makes it a potential big player in remote sensing technologies today and in the near future. [ABSTRACT FROM AUTHOR]

Spatiotemporal scale is a basic component of geographical problems because the size of spatiotemporal units may have a significant impact on the aggregation of spatial data and the corresponding analysis results. However, there is no clear standard for measuring the representativeness of conclusions when geographical data with different temporal and spatial units are used in geographical calculations. Therefore, a spatiotemporal analysis unit optimization framework is proposed to evaluate candidate analysis units using the distribution patterns of spatiotemporal data. The framework relies on Pareto optimality to select the spatiotemporal analysis unit, thereby overcoming the subjectivity and randomness of traditional unit setting methods and mitigating the influence of the modifiable areal unit problem (MAUP) to a certain extent. The framework is used to analyze floating car trajectory data, and the spatiotemporal analysis unit is optimized by using a combination of global spatial autocorrelation coefficients and the coefficients of variation of local spatial autocorrelation. Moreover, based on urban hotspot calculations, the effectiveness of the framework is further verified. The proposed optimization framework for spatiotemporal analysis units based on multiple criteria can provide suitable spatiotemporal analysis scales for studies of geographical phenomena. [ABSTRACT FROM AUTHOR]

Beidou Navigation Satellite System (BDS) third generation satellites currently broadcast Open Service (OS) signals into two closely spaced Radio Frequencies (RFs) in the B2 band. These are the B2a and B2b signal components, which form the current implementation of the Asymmetric Constant-Envelope Binary Offset Carrier (ACE-BOC) modulation. The B2a signal features both a data and a pilot channel, whereas the B2b component is data only with data symbols of 1 ms duration. The absence of a pilot channel and the fast data rate make the processing of the B2b component challenging. Tracking performance can, however, be improved by jointly processing the B2a and B2b components. In this respect, meta-signal approaches are investigated for jointly processing the B2a and B2b signals. Two meta-signal tracking architectures are proposed: the first considers the pilot channel of the B2a component and the data channel of the B2b signal. The second exploits all the power available and also implements data/pilot combining on the B2a channel. Both architectures allow the extension of the integration time beyond the data symbol duration using non-coherent approaches. Theoretical results are supported by simulations and real data analysis performed using a custom Software Defined Radio (SDR) receiver. Simulation and experimental results clearly show the benefits of the meta-signal approach, which can be effectively adopted for the processing of asymmetric modulations such as the current implementation of the ACE-BOC, which lacks a pilot channel on the B2b component. [ABSTRACT FROM AUTHOR]

Africa has the largest population growth rate in the world and an agricultural system characterized by the predominance of smallholder farmers. Improving food security in Africa will require a good understanding of farming systems yields as well as reducing yield gaps (i.e., the difference between potential yield and actual farmer yield). To this end, crop yield gap practices in African countries need to be understood to fill this gap while decreasing the environmental impacts of agricultural systems. For instance, the variability of yields has been demonstrated to be strongly controlled by soil fertilizer use, irrigation management, soil attribute, and the climate. Consequently, the quantitative assessment and mapping information of soil attributes such as nitrogen (N), phosphorus (P), potassium (K), soil organic carbon (SOC), moisture content (MC), and soil texture (i.e., clay, sand and silt contents) on the ground are essential to potentially reducing the yield gap. However, to assess, measure, and monitor these soil yield-related parameters in the field, there is a need for rapid, accurate, and inexpensive methods. Recent advances in remote sensing technologies and high computational performances offer a unique opportunity to implement cost-effective spatiotemporal methods for estimating crop yield with important levels of scalability. However, researchers and scientists in Africa are not taking advantage of the opportunity of increasingly available geospatial remote sensing technologies and data for yield studies. The objectives of this report are to (i) conduct a review of scientific literature on the current status of African yield gap analysis research and their variation in regard to soil properties management by using remote sensing techniques; (ii) review and describe optimal yield practices in Africa; and (iii) identify gaps and limitations to higher yields in African smallholder farms and propose possible improvements. Our literature reviewed 80 publications and covered a period of 22 years (1998-2020) over many selected African countries with a potential yield improvement. Our results found that (i) the number of agriculture yield-focused remote sensing studies has gradually increased, with the largest proportion of studies published during the last 15 years; (ii) most studies were conducted exclusively using multispectral Landsat and Sentinel sensors; and (iii) over the past decade, hyperspectral imagery has contributed to a better understanding of yield gap analysis compared to multispectral imagery; (iv) soil nutrients (i.e., NPK) are not the main factor influencing the studied crop productivity in Africa, whereas clay, SOC, and soil pH were the most examined soil properties in prior papers. [ABSTRACT FROM AUTHOR]

Viewing and illumination geometry has a strong influence on optical measurements of natural surfaces due to their anisotropic reflectance properties. Typically, cameras on-board unmanned aerial vehicles (UAVs) are affected by this because of their relatively large field of view (FOV) and thus large range of viewing angles. In this study, we investigated the magnitude of reflectance anisotropy effects in the 500–900 nm range, captured by a frame camera mounted on a UAV during a standard mapping flight. After orthorectification and georeferencing of the images collected by the camera, we calculated the viewing geometry of all observations of each georeferenced ground pixel, forming a dataset with multi-angular observations. We performed UAV flights on two days during the summer of 2016 over an experimental potato field where different zones in the field received different nitrogen fertilization treatments. These fertilization levels caused variation in potato plant growth and thereby differences in structural properties such as leaf area index (LAI) and canopy cover. We fitted the Rahman–Pinty–Verstraete (RPV) model through the multi-angular observations of each ground pixel to quantify, interpret, and visualize the anisotropy patterns in our study area. The Q parameter of the RPV model, which controls the proportion of forward and backward scattering, showed strong correlation with canopy cover, where in general an increase in canopy cover resulted in a reduction of backward scattering intensity, indicating that reflectance anisotropy contains information on canopy structure. In this paper, we demonstrated that anisotropy data can be extracted from measurements using a frame camera, collected during a typical UAV mapping flight. Future research will focus on how to use the anisotropy signal as a source of information for estimation of physical vegetation properties. [ABSTRACT FROM AUTHOR]

This paper introduces the technique of retrieving the profiles of vertical distribution of ozone considering temperature and aerosol correction in DIAL sounding of the atmosphere. The authors determine wavelengths, which are promising for measurements of ozone profiles in the upper troposphere–lower stratosphere. An ozone differential absorption lidar is designed for the measurements. The results of applying the developed technique to the retrieval of the vertical profiles of ozone considering temperature and aerosol correction in the altitude range 6–15 km in DIAL sounding of the atmosphere confirm the prospects of ozone sounding at selected wavelengths of 341 and 299 nm with the proposed lidar. The 2015 ozone profiles retrieved were compared with satellite IASI data and the Kruger model. [ABSTRACT FROM AUTHOR]

Unmanned Aerial Vehicles (UAVs) are capable of providing high-quality orthoimagery and 3D information in the form of point clouds at a relatively low cost. Their increasing popularity stresses the necessity of understanding which algorithms are especially suited for processing the data obtained from UAVs. The features that are extracted from the point cloud and imagery have different statistical characteristics and can be considered as heterogeneous, which motivates the use of Multiple Kernel Learning (MKL) for classification problems. In this paper, we illustrate the utility of applying MKL for the classification of heterogeneous features obtained from UAV data through a case study of an informal settlement in Kigali, Rwanda. Results indicate that MKL can achieve a classification accuracy of 90.6%, a 5.2% increase over a standard single-kernel Support Vector Machine (SVM). A comparison of seven MKL methods indicates that linearly-weighted kernel combinations based on simple heuristics are competitive with respect to computationally-complex, non-linear kernel combination methods. We further underline the importance of utilizing appropriate feature grouping strategies for MKL, which has not been directly addressed in the literature, and we propose a novel, automated feature grouping method that achieves a high classification accuracy for various MKL methods. [ABSTRACT FROM AUTHOR]

This paper proposes the use of terrestrial laser scanning (TLS) measurements together with finite element method (FEM) numerical modeling to assess the current technical condition. The main aim of the paper was to evaluate the effect of point cloud size reduction on the quality of the geometric model and the ability to represent the corrosion level in assessing its load-carrying capacity. In this study, a standard scanning was performed on a historical object and a point cloud of a selected corroded element was generated. In order to further process the data, gradual reductions were made in the number of points from which meshes representing the geometry of the selected beam were created. Inaccuracy analyses of the meshes generated on the reduced point clouds were performed. Numerical analysis was then conducted for the selected mesh generated from the reduced point cloud. The results identified the locations of maximum stresses. The presented analysis showed that by developing the presented measurement and computational technique, laser scanning can be used to determine the degree of corrosion of hard-to-reach steel elements. [ABSTRACT FROM AUTHOR]

In the context of climate change, vineyard monitoring to better understand spatiotemporal patterns of grapevine development is of utter importance for precision viticulture. We present a time series analysis of hyperspectral in situ and multispectral UAV data for different irrigation systems in Lower Franconia and correlate results with sensor data for soil moisture, temperature, and precipitation. Analysis of Variance (ANOVA) and a Tukey's HSD test were performed to see whether Vegetation Indices (VIs) are significantly different with respect to irrigation systems as well as topographic position in the vineyard. Correlation between in situ measurements and UAV data for selected VIs is also investigated for upscaling analysis. We find significant differences with respect to irrigation, as well as for topographic position for most of the VIs investigated, highlighting the importance of adapted water management. Correlation between in situ and UAV data is significant only for some indices (NDVI and CIRedEdge, r 2 of 0.33 and 0.49, respectively), while shallow soil moisture patterns correlate well with in situ-derived VIs such as the CIRedEdge and RG index ( r 2 of 0.34 and 0.46). [ABSTRACT FROM AUTHOR]

One of the most promising applications of satellite data is providing users in charge of land and emergency management with information and data to support decision making for geohazard mapping, monitoring and early warning. In this work, we consider ground displacement data obtained via interferometric processing of satellite radar imagery, and we provide a novel post-processing approach based on a Functional Data Analysis paradigm capable of detecting precursors in displacement time series. The proposed approach appropriately accounts for the spatial and temporal dependencies of the data and does not require prior assumptions on the deformation trend. As an illustrative case, we apply the developed method to the identification of precursors to a mud volcano eruption in the Santa Barbara village in Sicily, southern Italy, showing the advantages of using a Functional Data Analysis framework for anticipating the warning signal. Indeed, the proposed approach is able to detect precursors of the paroxysmal event in the time series of the locations close to the eruption vent and provides a warning signal months before a scalar approach would. The method presented can potentially be applied to a wide range of geological events, thus representing a valuable and far-reaching monitoring tool. [ABSTRACT FROM AUTHOR]

The Earth's center of mass (CM) is defined in satellite orbit dynamics as the center of mass of the entire Earth system, including the solid Earth, oceans, cryosphere, and atmosphere. The CM can be realized using the vector from the origin of the International Terrestrial Reference Frame (ITRF) to the CM, and directly estimated from satellite laser ranging (SLR) data. In previous studies and ITRF translations, SLR observations were assumed to contain only a constant, systematic, station-dependent bias. This treatment leads to a difference of a few mm between the SLR results and other estimates, such as GPS-based global inversions. We show that the difference cannot be attributed to the deficiency of the distribution of SLR tracking stations but is due to the impact of a significant surface-loading-induced seasonal signal captured in the laser range measurement (appearing in station range bias) during the traveling of the laser light pulse. The errors in the modeling of the troposphere zenith delay considerably impact the determination of geocenter motion from SLR data. The SLR-data-derived geocenter motion becomes comparable to the global inversion results when the range biases and thermosphere delay for SLR tracking stations in the SLR network are adjusted as part of the monthly solution. [ABSTRACT FROM AUTHOR]

Mapping soil organic carbon (SOC) stock can serve as a resilience indicator for climate change. As part of the carbon dioxide (CO2) sink, soil has recently become an integral part of the global carbon agenda to mitigate climate change. We used hyperspectral remote sensing to model the SOC stock in the Sele River plain located in the Campania region in southern Italy. To this end, a soil spectral library (SSL) for the Campania region was combined with an aerial hyperspectral image acquired with the AVIRIS–NG sensor mounted on a Twin Otter aircraft at an altitude of 1433 m. The products of this study were four raster layers with a high spatial resolution (1 m), representing the SOC stocks and three other related soil attributes: SOC content, clay content, and bulk density (BD). We found that the clay minerals' spectral absorption at 2200 nm has a significant impact on predicting the examined soil attributes. The predictions were performed by using AVIRIS–NG sensor data over a selected plot and generating a quantitative map which was validated with in situ observations showing high accuracies in the ground-truth stage (OC stocks [RPIQ = 2.19, R2 = 0.72, RMSE = 0.07]; OC content [RPIQ = 2.27, R2 = 0.80, RMSE = 1.78]; clay content [RPIQ = 1.6 R2 = 0.89, RMSE = 25.42]; bulk density [RPIQ = 1.97, R2 = 0.84, RMSE = 0.08]). The results demonstrated the potential of combining SSLs with remote sensing data of high spectral/spatial resolution to estimate soil attributes, including SOC stocks. [ABSTRACT FROM AUTHOR]

Image segmentation is an important process and a prerequisite for object-based image analysis, but segmenting an image into meaningful geo-objects is a challenging problem. Recently, some scholars have focused on hybrid methods that employ initial segmentation and subsequent region merging since hybrid methods consider both boundary and spatial information. However, the existing merging criteria (MC) only consider the heterogeneity between adjacent segments to calculate the merging cost of adjacent segments, thus limiting the goodness-of-fit between segments and geo-objects because the homogeneity within segments and the heterogeneity between segments should be treated equally. To overcome this limitation, in this paper a hybrid remote-sensing image segmentation method is employed that considers the objective heterogeneity and relative homogeneity (OHRH) for MC during region merging. In this paper, the OHRH method is implemented in five different study areas and then compared to our region merging method using the objective heterogeneity (OH) method, as well as the full lambda-schedule algorithm (FLSA). The unsupervised evaluation indicated that the OHRH method was more accurate than the OH and FLSA methods, and the visual results showed that the OHRH method could distinguish both small and large geo-objects. The segments showed greater size changes than those of the other methods, demonstrating the superiority of considering within- and between-segment heterogeneity in the OHRH method. [ABSTRACT FROM AUTHOR]

This paper proposes the use of spectral unmixing and sparse reconstruction methods to restore a simulated dataset for the Environmental Mapping and Analysis Program (EnMAP), the forthcoming German spaceborne hyperspectral mission. The described method independently decomposes each image element into a set of representative spectra, which come directly from the image and have previously undergone a low-pass filtering in noisy bands. The residual vector from the unmixing process is considered as mostly composed of noise and ignored in the reconstruction process. The first assessment of the results is encouraging, as the original bands taken into account are reconstructed with a high signal-to-noise ratio and low overall distortions. Furthermore, the same method could be applied for the inpainting of dead pixels, which could affect EnMAP data, especially at the end of the satellite's life cycle. [ABSTRACT FROM AUTHOR]