Search

Radio frequency interference (RFI) poses major threats to synthetic aperture radar (SAR) systems. Due to the suppression of useful target signals via high-power RFI, the SAR imaging quality is severely degraded. Nevertheless, existing studies on RFI mitigation mainly focus on narrowband filtering, while wideband RFI mitigation methods are relatively lacking and perform non-robustly. In this paper, an RFI mitigation scheme is proposed based on instantaneous spectrum forward consecutive mean excision (FCME), which is suitable for both narrowband and wideband RFI mitigation. The SAR echo signal is first transformed into a time–frequency (TF) domain through a short-time Fourier transform (STFT). On this basis, the instantaneous spectra polluted via RFI are detected via a kurtosis-based statistical test and then filtered via FCME to achieve RFI mitigation. Finally, connected component analysis is applied as a safety measure so as to avoid the unnecessary loss of useful target signal. The combination of FCME and connected component analysis enables the proposed method to thoroughly filter out RFI while retaining more useful target signals compared with other competing methods. The experimental results on real SAR raw data validate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Ship wake detection using synthetic aperture radar (SAR) imagery provides a way to obtain small marine ship information, but it often becomes unavailable and unreliable during a high sea state. Polarimetric information provides a potential way to solve this problem, which can enhance the ship target as well as the ship wake features. However, three challenges still exist in ship wake detection in polarimetric SAR imagery: the unwanted influences of bright and singular points on ship wake detection, the lack of performance analysis of wake detection by new-type polarimetric enhancement methods, and the difficulty of using the assessment criteria for ship wake detection. In this paper, we try to solve the above problems. Firstly, fully polarized SAR imagery of both ship turbulent and Kelvin wake is simulated based on the two-scale composite model, and the Polarimetric Whitening Filter (PWF) and Polarimetric Detection Optimization Filter (PDOF) are applied to the simulated fully polarized SAR imagery to enhance the ship wake features. Secondly, since the bright and singular points resulting from the ship echoes and the polarimetric enhancement methods may lead to misdetections, a logarithm process and z-score normalization pre-processing has been applied to the images. Then, a new assessment criterion for wake detection performance has been formulated, and the probability of missing detections (PMDs) and the probability of false alarms (PFAs) have been defined for two different requirements. And a Radon transform-based ship wake detection method for both ship turbulence and Kelvin wake has been carried out in horizontal–horizontal (HH), vertical–vertical (VV), horizontal–vertical (HV), PWF and PDOF SAR imagery. Finally, an analysis of the wake detection performance has been carried out. The PWF and PDOF can improve the wake detection performance by an average of nearly 50 percent compared with the HH and VV. [ABSTRACT FROM AUTHOR]

Machine learning and deep neural networks have shown satisfactory performance in the supervised classification of Polarimetric Synthetic Aperture Radar (PolSAR) images. However, the PolSAR image classification task still faces some challenges. First, the current form of model input used for this task inevitably involves tedious preprocessing. In addition, issues such as insufficient labels and the design of the model also affect classification performance. To address these issues, this study proposes an augmentation method to better utilize the labeled data and improve the input format of the model, and an end-to-end PolSAR image global classification is implemented on our proposed hybrid network, PolSARMixer. Experimental results demonstrate that, compared to existing methods, our proposed method reduces the steps for the classification of PolSAR images, thus eliminating repetitive data preprocessing procedures and significantly improving classification performance. [ABSTRACT FROM AUTHOR]

The frequent occurrence of global flood disasters leads to millions of people falling into poverty each year, which poses immense pressure on governments and hinders social development. Therefore, providing more data support for flood disaster detection is of paramount importance. To facilitate the development of water body detection algorithms, we create the DaliWS dataset for water segmentation, which contains abundant pixel-level annotations, and consists of high spatial resolution SAR images collected from the GaoFen-3 (GF-3) satellite. For comprehensive analysis, extensive experiments are conducted on the DaliWS dataset to explore the performance of the state-of-the-art segmentation models, including FCN, SegNeXt, U-Net, and DeeplabV3+, and investigate the impact of different polarization modes on water segmentation. Additionally, to probe the generalization of our dataset, we further evaluate the models trained with the DaliWS dataset, on publicly available water segmentation datasets. Through detailed analysis of the experimental results, we establish a valuable benchmark and provide usage guidelines for future researchers working with the DaliWS dataset. The experimental results demonstrate the F1 scores of FCN, SegNeXt, U-Net, and DeeplabV3+ on the dual-polarization data of DaliWS dataset reach to 90.361%, 90.192%, 92.110%, and 91.199%, respectively, and these four models trained using the DaliWS dataset exhibit excellent generalization performance on the public dataset, which further confirms the research value of our dataset. [ABSTRACT FROM AUTHOR]

The UAV-borne video SAR (ViSAR) imaging system requires miniaturization, low power consumption, high frame rates, and high-resolution real-time imaging. In order to satisfy the requirements of real-time imaging processing for the UAV-borne ViSAR under limited memory and parallel computing resources, this paper proposes a method of embedded GPU-based real-time imaging processing for the UAV-borne ViSAR. Based on a parallel programming model of the compute unified device architecture (CUDA), this paper designed a parallel computing method for range-Doppler (RD) and map drift (MD) algorithms. By utilizing the advantages of the embedded GPU characterized with parallel computing, we improved the processing speed of real-time ViSAR imaging. This paper also adopted a unified memory management method, which greatly reduces data replication and communication latency between the CPU and the GPU. The data processing of 2048 × 2048 points took only 1.215 s on the Jetson AGX Orin platform to form a nine-consecutive-frame image with a resolution of 0.15 m, with each frame taking only 0.135 s, enabling real-time imaging at a high frame rate of 5 Hz. In actual testing, continuous mapping can be achieved without losing the scenes, intuitively obtaining the dynamic observation effects of the area. The processing results of the measured data have verified the reliability and effectiveness of the proposed scheme, satisfying the processing requirements for real-time ViSAR imaging. [ABSTRACT FROM AUTHOR]

Differential SAR Interferometry is a largely exploited technique to study ground deformations. A key application is the detection of the effects promoted by earthquakes, including detailed variations in ground deformations at different scales. In this work, an implemented Python script (Snap2DQuake) based on the "snappy" module by SNAP software 9.0.8 (ESA) for the processing of satellite imagery is proposed. Snap2DQuake is aimed at producing detailed coseismic deformation maps using Sentinel-1 C-band data by the DInSAR technique. With this alternative approach, the processing is simplified, and several issues that may occur using the software are solved. The proposed tool has been tested on two case studies: the Mw 6.4 Petrinja earthquake (Croatia, December 2020) and the Mw 5.7 to Mw 6.3 earthquakes, which occurred near Tyrnavós (Greece, March 2021). The earthquakes, which occurred in two different tectonic contexts, are used to test and verify the validity of Snap2DQuake. Snap2DQuake allows us to provide detailed deformation maps along the vertical and E-W directions in perfect agreement with observations reported in previous works. These maps offer new insights into the deformation pattern linked to earthquakes, demonstrating the reliability of Snap2DQuake as an alternative tool for users working on different applications, even with basic coding skills. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar (SAR) is an important tool for observing the oceanic internal wave phenomenon. However, owing to the unstable imaging quality of SAR on oceanic internal waves, the texture details of internal wave images are usually unclear, which is not conducive to the subsequent applications of the images. To cope with this problem, a texture enhancement method for oceanic internal wave SAR images is proposed in this paper, which is based on non-local mean (NLM) filtering and texture layer enhancement (TLE). Since the strong speckle noise commonly present in internal wave images is simultaneously enhanced during texture enhancement, resulting in degraded image quality, NLM filtering is first performed to suppress speckle noise. Then, the denoised image is decomposed into the structure layer and the texture layer, and a texture layer enhancement method oriented to the texture characteristics of oceanic internal waves is proposed and applied. Finally, the enhanced texture layer and the structure layer are combined to reconstruct the final enhanced image. Experiments are conducted based on the Gaofen-3 real SAR data, and the results demonstrate that the proposed method performs well in suppressing speckle noise, maintaining overall image brightness, and enhancing internal wave texture details. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) is a high-resolution imaging sensor commonly mounted on platforms such as airplanes and satellites for widespread use. In complex electromagnetic environments, radio frequency interference (RFI) severely degrades the quality of SAR images due to its widely varying bandwidth and numerous unknown emission sources. Although traditional deep learning-based methods have achieved remarkable results by directly processing SAR images as visual ones, there is still considerable room for improvement in their performance due to the wide coverage and high intensity of RFI. To address these issues, this paper proposes the fusion of segmentation and inpainting networks (FuSINet) to suppress SAR RFI in the time-frequency domain. Firstly, to weaken the dominance of RFI in SAR images caused by high-intensity interference, a simple CCN-based network is employed to learn and segment the RFI. This results in the removal of most of the original interference, leaving blanks that allow the targets to regain dominance in the overall image. Secondly, considering the wide coverage characteristic of RFI, a U-former network with global information capture capabilities is utilized to learn the content covered by the interference and fill in the blanks created by the segmentation network. Compared to the traditional Transformer, this paper enhances its global information capture capabilities through shift-windows and down-sampling layers. Finally, the segmentation and inpainting networks are fused together through a weighted parameter for joint training. This not only accelerates the learning speed but also enables better coordination between the two networks, leading to improved RFI suppression performance. Extensive experimental results demonstrate the substantial performance enhancement of the proposed FuSINet. Compared to the PISNet+, the proposed attention mechanism achieves a 2.49 dB improvement in peak signal-to-noise ratio (PSNR). Furthermore, compared to Uformer, the FuSINet achieves an additional 4.16 dB improvement in PSNR. [ABSTRACT FROM AUTHOR]

This paper investigates a real-time process generator of wideband signals, which calculates waveforms in a field-programmable gate array (FPGA) using the high-level synthesis (HLS) method. To obtain high-resolution and wide-swath images, the generator must produce multiple modes of large time-bandwidth product (TBP) linear frequency modulation (LFM) signals. However, the conventional storage method is unrealistic as it requires huge storage resources to save pre-computed waveforms. Therefore, this paper proposes a novel processing approach that calculates waveforms in real-time based simply on parameters such as the sampling frequency, bandwidth, and time width. Additionally, this paper implements predistortion through the polynomial curve to approximate phase errors of the system. The parallelizing process in the FPGA is necessary to satisfy the high-speed requirement of a digital-to-analog converter (DAC); however, repeatedly multiplexing real-time calculation consumes extensive logic and DSP resources, potentially exceeding FPGA limitations. To address this, this paper proposes a piecewise linear algorithm to conserve resources, which processes the polynomial only once, acquires the difference in two adjacent values through the register and pipeline, and then adds this increment to facilitate parallel computations. The performance of this proposed generator is validated through simulation and implemented in experiments with an X-band airborne SAR system. [ABSTRACT FROM AUTHOR]

The Baihetan reservoir region is characterized by complex geomorphology, significant altitude differences, and rugged terrain. Geological hazards in such areas are often characterized by high concealment, wide distribution, and difficulty in field investigation. Traditional identification techniques are unable to detect and monitor geological hazards on a large scale with high efficiency and accuracy. In recent decades, interferometric synthetic aperture radar (InSAR) techniques, such as small baseline subset InSAR (SBAS-InSAR), have been widely applied to landslide identification. However, due to factors such as vegetation and the degree of landslide deformation, single-band synthetic aperture radar (SAR) still has certain limitations in detecting landslides. In this study, SBAS-InSAR was conducted based on ALOS-2 and Sentinel-1 ascending-descending images covering the Baihetan reservoir region. Deformation identification results were utilized to conduct a statistical analysis of the SAR detection performance and landslide characteristics, and the effect of vegetation on the detection effectiveness of different SAR bands was discussed. The study revealed that when surface vegetation coverage reaches a high degree, the percentage of areas with coverage greater than 0.6 is greater than 95%, the SAR coherence is mainly affected by vegetation thickness; the comparison of the difference change in the average coherence of the C/L bands among the four vegetation types shows that the ratio of the average coherence of the L-bands to the C-bands increases by a factor of three with the increase in thickness and the transition from crops to shrubs and trees. The results showed that the L-band has better detectability than the C-band in alpine-canyon terrain with vegetation coverage and complex vegetation composition. However, considering the high temporal resolution and accessibility of Sentinel-1 SAR data, it is still the main data choice for wide-area identification of landslides in the reservoir area, while other satellite-borne SAR data with different wavelengths and resolutions, such as ALOS, can be used to assist in the identification and monitoring of landslide hazards with significant magnitude of deformations and dense vegetation coverage. Therefore, the combined utilization of multi-band SAR data has the potential to enhance the dependability of landslide identification and monitoring, resulting in more accurate detection results. [ABSTRACT FROM AUTHOR]

The utilization of deep learning in Synthetic Aperture Radar (SAR) Automatic Target Recognition (ATR) has witnessed a recent surge owing to its remarkable feature extraction capabilities. Nonetheless, deep learning methodologies are often encumbered by inadequacies in labeled data and the protracted nature of training processes. To address these challenges and offer an alternative avenue for accurately extracting image features, this paper puts forth a novel and distinctive network dubbed the Capsule Broad Learning System Network for robust SAR ATR (CBLS-SARNET). This novel strategy is specifically tailored to cater to small-sample SAR ATR scenarios. On the one hand, we introduce a United Division Co-training (UDC) Framework as a feature filter, adeptly amalgamating CapsNet and the Broad Learning System (BLS) to enhance network efficiency and efficacy. On the other hand, we devise a Parameters Sharing (PS) network to facilitate secondary learning by sharing the weight and bias of BLS node layers, thereby augmenting the recognition capability of CBLS-SARNET. Experimental results unequivocally demonstrate that our proposed CBLS-SARNET outperforms other deep learning methods in terms of recognition accuracy and training time. Furthermore, experiments validate the generalization and robustness of our novel method under various conditions, including the addition of blur, Gaussian noise, noisy labels, and different depression angles. These findings underscore the superior generalization capabilities of CBLS-SARNET across diverse SAR ATR scenarios. [ABSTRACT FROM AUTHOR]

Wideband interference (WBI) can significantly reduce the image quality and interpretation accuracy of synthetic aperture radar (SAR). To eliminate the negative effects of WBI on SAR, we propose a novel end-to-end data-driven approach to mitigate WBI. Specifically, the WBI is mitigated by an explicit function called WBI mitigation–generative adversarial network (WBIM-GAN), mapping from an input WBI-corrupted echo to its properly WBI-free echo. WBIM-GAN comprises a WBI mitigation network and a target echo discriminative network. The WBI mitigation network incorporates a deep residual network to enhance the performance of WBI mitigation while addressing the issue of gradient saturation in the deeper layers. Simultaneously, the class activation mapping technique fully demonstrates that the WBI mitigation network can localize the WBI region rather than the target echo. By utilizing the PatchGAN architecture, the target echo discriminative network can capture the local texture and statistical features of target echoes, thus improving the effectiveness of WBI mitigation. Before applying the WBIM-GAN, the short-time Fourier transform (STFT) converts SAR echoes into a time–frequency domain (TFD) to better characterize WBI features. Finally, by comparing different WBI mitigation methods applied to several real measured SAR data collected by the Sentinel-1 system, the efficiency and superiority of WBIM-GAN are proved sufficiently. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) images are widely utilized in the field of remote sensing. However, there is a limited body of literature specifically addressing the compression of SAR learning images. To address the escalating volume of SAR image data for storage and transmission, which necessitates more effective compression algorithms, this paper proposes a novel framework for compressing SAR images. Experimental validation is performed using a representative low-resolution Sentinel-1 dataset and the high-resolution QiLu-1 dataset. Initially, we introduce a novel two-stage transformation-based approach aimed at suppressing the low-frequency components of the input data, thereby achieving a high information entropy and minimizing quantization losses. Subsequently, a quality map guidance image compression algorithm is introduced, involving the fusion of the input SAR images with a target-aware map. This fusion involves convolutional transformations to generate a compact latent representation, effectively exploring redundancies between focused and non-focused areas. To assess the algorithm's performance, experiments are carried out on both the low-resolution Sentinel-1 dataset and the high-resolution QiLu-1 dataset. The results indicate that the low-frequency suppression algorithm significantly outperforms traditional processing algorithms by 3–8 dB when quantifying the input data, effectively preserving image features and improving image performance metrics. Furthermore, the quality map guidance image compression algorithm demonstrates a superior performance compared to the baseline model. [ABSTRACT FROM AUTHOR]

This study develops a structure for mapping native vegetation in a transition area between the Brazilian Cerrado and the Atlantic Forest from integrated spatial information of Sentinel-1 and Sentinel-2 satellites. Most studies use integrated data to improve classification accuracy in adverse atmospheric conditions, in which optical data have many errors. However, this method can also improve classifications carried out in landscapes with favorable atmospheric conditions. The use of Sentinel-1 and Sentinel-2 data can increase the accuracy of mapping algorithms and facilitate visual interpretation during sampling by providing more parameters that can be explored to differentiate land use classes with complementary information, such as spectral, backscattering, polarimetry, and interferometry. The study area comprises the Lobo Reservoir Hydrographic Basin, which is part of an environmental conservation unit protected by Brazilian law and with significant human development. LULC were classified using the random forest deep learning algorithm. The classifying attributes were backscatter coefficients, polarimetric decomposition, and interferometric coherence for radar data (Sentinel-1), and optical spectral data, comprising bands in the red edge, near-infrared, and shortwave infrared (Sentinel-2). The attributes were evaluated in three settings: SAR and optical data in separately settings (C1 and C2, respectively) and in an integrated setting (C3). The study found greater accuracy for C3 (96.54%), an improvement of nearly 2% compared to C2 (94.78%) and more than 40% in relation to C1 (55.73%). The classification algorithm encountered significant challenges in identifying wetlands in C1, but performance improved in C3, enhancing differentiation by stratifying a greater number of classes during training and facilitating visual interpretation during sampling. Accordingly, the integrated use of SAR and optical data can improve LULC mapping in tropical regions where occurs biomes interface, as in the transitional Brazilian Cerrado and Atlantic Forest. [ABSTRACT FROM AUTHOR]

Restricted by the ill-posed antenna measurement matrix, the conventional smoothed L 0 norm algorithm (SL0) fails to enable direct real aperture radar angular super-resolution imaging. This paper proposes a modified smoothed L 0 norm (MSL0) algorithm to address this issue. First, as the pseudo-inverse of the ill-posed antenna measurement matrix is required to set the initial values and calculate the gradient projection, a regularization strategy is employed to relax the ill-posedness. Based on the regularization strategy, the proposed MSL0 algorithm can avoid noise amplification when faced with the ill-posed antenna measurement matrix of real aperture radar. Additionally, to prevent local minima problems, we introduce a hard thresholding operator, based on which the proposed MSL0 algorithm can accurately reconstruct sparse targets. Simulations and experimental results verify the performance of the proposed MSL0 algorithm. [ABSTRACT FROM AUTHOR]

Land cover classification using high-resolution Polarimetric Synthetic Aperture Radar (PolSAR) images obtained from satellites is a challenging task. While deep learning algorithms have been extensively studied for PolSAR image land cover classification, the performance is severely constrained due to the scarcity of labeled PolSAR samples and the limited domain acceptance of models. Recently, the emergence of the Segment Anything Model (SAM) based on the vision transformer (VIT) model has brought about a revolution in the study of specific downstream tasks in computer vision. Benefiting from its millions of parameters and extensive training datasets, SAM demonstrates powerful capabilities in extracting semantic information and generalization. To this end, we propose a dual-stream feature extraction network based on SAM, i.e., BSDSNet. We change the image encoder part of SAM to a dual stream, where the ConvNext image encoder is utilized to extract local information and the VIT image encoder is used to extract global information. BSDSNet achieves an in-depth exploration of semantic and spatial information in PolSAR images. Additionally, to facilitate a fine-grained amalgamation of information, the SA-Gate module is employed to integrate local–global information. Compared to previous deep learning models, BSDSNet's impressive ability to represent features is akin to a versatile receptive field, making it well suited for classifying PolSAR images across various resolutions. Comprehensive evaluations indicate that BSDSNet achieves excellent results in qualitative and quantitative evaluation when performing classification tasks on the AIR-PolSAR-Seg dataset and the WHU-OPT-SAR dataset. Compared to the suboptimal results, our method improves the Kappa metric by 3.68% and 0.44% on the AIR-PolSAR-Seg dataset and the WHU-OPT-SAR dataset, respectively. [ABSTRACT FROM AUTHOR]

The circular synthetic aperture radar (CSAR) has the ability of all-round continuous observation and high-resolution imaging detection, and can obtain all-round scattering information and higher-resolution images of the observation scene, so as to realize the target information extraction and three-dimensional (3D) contour reconstruction of the observation targets. However, the existing methods are not accurate enough to extract the information of vehicle targets. Through the analysis of the vehicle target scattering model and CSAR image characteristics, this paper proposes a vehicle target information extraction and 3D contour reconstruction method based on multiple different pitch-angle observation CSAR data. The proposed method creatively utilizes the projection relationship of the vehicle in 2D CSAR imaging to reconstruct the 3D contour of the vehicle, without prior information. Firstly, the CSAR data obtained from multiple different pitch-angle observations are fully utilized, and the scattering points of odd-bounce reflection and even-bounce reflection echoes are extracted from the two-dimensional (2D) coherent CSAR images of the vehicle target. Secondly, the basic contour of the vehicle body is extracted from the scattering points of the even-bounce reflected echoes. Then, the geometric projection relationship of the "top–bottom shifting" effect of odd-bounce reflection is used to calculate the height and position information of the scattering points of odd-bounce reflection, so as to extract the multi-layer 3D contour of the vehicle target. Finally, the basic contour and the multi-layer 3D contour of the vehicle are fused to realize high-precision 3D contour reconstruction of the vehicle target. The correctness and effectiveness of the proposed method are verified by using the CVDomes simulation dataset of the American Air Force Research Laboratory (AFRL), and the experimental results show that the proposed method can achieve high-precision information extraction and realize distinct 3D contour reconstruction of the vehicle target. [ABSTRACT FROM AUTHOR]

Soil freeze-thaw (FT) cycles over agricultural lands are of great importance due to their vital role in controlling soil moisture distribution, nutrient availability, health of microbial communities, and water partitioning during flood events. Active microwave sensors such as C-band Sentinel-1 synthetic aperture radar (SAR) can serve as powerful tools to detect field-scale soil FT state. Using Sentinel-1 SAR observations, this study compares the performance of two FT detection approaches, a commonly used seasonal threshold approach (STA) and a computationally inexpensive general threshold approach (GTA) at an agricultural field in New Hampshire, US. It also explores the applicability of an interferometric coherence approach (ICA) for FT detection. STA and GTA achieved 85% and 78% accuracy, respectively, using VH polarization. We find a marginal degradation in the performance of STA (82%) and GTA (76%) when employing VV-polarized data. While there was approximately a 6 percentage point difference between STA's and GTA's overall accuracy, we recommend GTA for FT detection using SAR images at sub-field-scale over extended regions because of its higher computational efficiency. Our analysis shows that interferometric coherence is not suitable for detecting FT transitions under mild and highly dynamic winter conditions. We hypothesize that the relatively mild winter conditions and therefore the subtle FT transitions are not able to significantly reduce the correlation between the phase values. Also, the ephemeral nature of snowpack in our study area, further compounded by frequent rainfall, could cause decorrelation of SAR images even in the absence of a FT transition. We conclude that despite Sentinel-1's ~80% mapping accuracy at a mid-latitude site, understanding the cause of misclassification remains challenging, even when detailed ground data are readily available and employed in error attribution efforts. [ABSTRACT FROM AUTHOR]

In the early stages, uncontrolled groundwater extraction led to the Hangjiahu (HJH) Plain becoming one of the areas with the most severe land subsidence in China. Since the beginning of this century, comprehensive measures have been taken to control the continuous aggravation of large land subsidence patterns in some areas; however, urban land subsidence issues, influenced by various factors, still persist and exhibit complex geographical distribution characteristics. In this study, we utilized Sentinel-1A images and the SBAS-InSAR technique to capture surface deformation over the HJH Plain in Zhejiang from 16 March 2017 to 20 January 2023. Through a comparative analysis with geological conditions, changes in surface mass loading, rainfall and groundwater, and land use types, we discussed the contributions of natural and anthropogenic factors to land subsidence. Augmented with optical remote sensing images and field investigations, we conducted a correlation analysis of the land subsidence status. The preliminary findings suggest that changes in surface mass loading and short-term heavy rainfall under extreme weather conditions can lead to periodic land subsidence changes in the region. Additionally, extensive infrastructure construction triggered by urbanization has resulted in significant and sustained land subsidence deformation. The research findings play an important guiding role in formulating scientifically effective strategies for land subsidence prevention and control, as well as urban planning and construction. [ABSTRACT FROM AUTHOR]

Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam's substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage. [ABSTRACT FROM AUTHOR]

Imaging maritime targets requires a high resolution and wide swath (HWRS) in a synthetic aperture radar (SAR). When operated with a variable pulse repetition interval (PRI), a staggered SAR can realize HRWS imaging, which needs to be reconstructed due to echo pulse loss and a nonuniformly sampled signal along the azimuth. The existing reconstruction algorithms are designed for stationary scenes in a staggered SAR mode, and thus, produce evident image defocusing caused by complex target motion for moving targets. Typically, the nonuniform sampling and complex motion of maritime targets aggravate the spectrum aliasing in a staggered SAR mode, causing inevitable ambiguity and degradation in its reconstruction performance. To this end, this study analyzed the spectrum of maritime targets in a staggered SAR system through theoretical derivation. After this, a reconstruction method named MBLCFD (Modified Best Linear Unbaised and Complex-Lag Time-Frequency Distribution) is proposed to refocus the blurred maritime target. First, the signal model of the maritime target with 3D rotation accompanying roll–pitch–yaw movement was established under the curved orbit of the satellite. The best linear unbiased (BLU) method was modified to alleviate the coupling of nonuniform sampling and target motion. A precise SAR algorithm was performed based on the method of inverse reversion to counteract the effect of a curved orbit and wide swath. Based on the hybrid SAR/ISAR technique, the complex-lag time-frequency distribution was exploited to refocus the maritime target images. Simulations and experiments were carried out to verify the effectiveness of the proposed method, providing precise refocusing performance in staggered mode. [ABSTRACT FROM AUTHOR]

Geosynchronous spaceborne–airborne (GEO-SA) ultra-high-frequency ultra-wideband bistatic synthetic aperture radar (UHF UWB BiSAR) provides high-precision images for marine and polar environments, which are pivotal in glacier monitoring and sea ice thickness measurement for polar ocean mapping and navigation. Contrasting with traditional high-frequency BiSAR, it faces unique challenges, such as the considerable spatial variability, significant range–azimuth coupling, and vast volumes of echo data, which impede high-resolution image reconstruction. This paper presents an improved bistatic nonlinear chirp scaling (NLCS) algorithm for imaging oceanic scenes with GEO-SA UHF UWB BiSAR. This methodology extends the two-dimensional (2-D) spectrum up to the sixth order via the method of series reversion (MSR) to meet accuracy demands and then employs an elliptical model to elucidate the alterations in the azimuth frequency modulation (FM) rate mismatch. Initially, the imaging geometry and signal model are introduced, and then a separation of bistatic slant ranges based on the configuration is proposed. In addition, during range processing, after eliminating linear range cell migration (RCM), the derivation process for the sixth-order 2-D spectrum is detailed and an improved filter is applied to correct the high-order RCM. Finally, during azimuth processing, the causes of the FM rate mismatch are analyzed, a cubic perturbation function derived from the elliptical model is used for FM rate equalization, and a unified sixth-order filter is applied to complete the azimuth compression. Experimental results with point targets and natural oceanic scenes validate the outstanding efficacy of the proposed NLCS algorithm, particularly in imaging quality enhancements for GEO-SA UHF UWB BiSAR. [ABSTRACT FROM AUTHOR]

The GNSS-based bistatic SAR (GNSS-BSAR) system has emerged as a hotspot due to its low power consumption, nice concealment, and worldwide reach. However, the weak landing power density of the GNSS signal often necessitates prolonged integration to achieve an adequate signal-to-noise ratio (SNR). In this case, the effects of the receiver's time-frequency errors and atmospheric disturbances are significant and cannot be ignored. Therefore, we propose an ionospheric scintillation compensation-based imaging scheme for dual-channel GNSS-BSAR system. This strategy first extracts the reference phase, which contains the ionospheric phase scintillation and other errors. Subsequently, the azimuth phase of the target is divided into difference phase and reference phase. We apply the two-step phase compensation to eliminate Doppler phase errors, thus achieving precise focusing of SAR images. Three sets of experiments using the GPS L5 signal as the illuminator were conducted, coherently processing a 1.5 km by 0.8 km scene about 300 s. The comparative results show that the proposed method exhibited better focusing performance, avoiding the practical challenges encountered by traditional autofocus algorithms. Additionally, ionospheric phase scintillation extracted at different times of the day suggest diurnal variations, preliminary illustrating the potential of this technology for ionospheric-related studies. [ABSTRACT FROM AUTHOR]

Soil moisture is one of the main factors affecting microwave radar backscatter from the ground. While there are other factors that affect backscatter levels (for instance, surface roughness, vegetation, and incident angle), relative variations in soil moisture can be estimated using space-based, medium resolution, multi-temporal synthetic aperture radar (SAR). Understanding the distribution and identification of water-saturated areas using SAR soil moisture can be important for wetland mapping. The SAR soil moisture retrieval algorithm provides a relative assessment and requires calibration over wet and dry periods. In this work, relative soil moisture indicators are derived from a time series of the RADARSAT Constellation Mission (RCM) SAR compact polarimetric (CP) data over reclaimed areas of an oil sands mine in Alberta, Canada. An evaluation of the soil moisture product is performed using in situ measurements showing agreement from June to September. The surface scattering component of m-chi CP decomposition and the RL SAR products demonstrated a good agreement with the field data (low RMSE values and a perfect alignment with field-identified wetlands). [ABSTRACT FROM AUTHOR]

In recent years, the development of neural networks has significantly advanced their application in Synthetic Aperture Radar (SAR) ship target detection for maritime traffic control and ship management. However, traditional neural network architectures are often complex and resource intensive, making them unsuitable for deployment on artificial satellites. To address this issue, this paper proposes a lightweight neural network: the Multi-Scale SAR Ship Detection Network (MSSD-Net). Initially, the MobileOne network module is employed to construct the backbone network for feature extraction from SAR images. Subsequently, a Multi-Scale Coordinate Attention (MSCA) module is designed to enhance the network's capability to process contextual information. This is followed by the integration of features across different scales using an FPN + PAN structure. Lastly, an Anchor-Free approach is utilized for the rapid detection of ship targets. To evaluate the performance of MSSD-Net, we conducted extensive experiments on the Synthetic Aperture Radar Ship Detection Dataset (SSDD) and SAR-Ship-Dataset. Our experimental results demonstrate that MSSD-Net achieves a mean average precision (mAP) of 98.02% on the SSDD while maintaining a compact model size of only 1.635 million parameters. This indicates that MSSD-Net effectively reduces model complexity without compromising its ability to achieve high accuracy in object detection tasks. [ABSTRACT FROM AUTHOR]

The spaceborne high-resolution and wide-swath synthetic aperture radar (HRWS-SAR) system combined with the ground moving target indication (GMTI) mode provides a promising prospect in the realization of wide-area target surveying and high-resolution target imaging. In this paper, a system design method is proposed for an HRWS-SAR-GMTI system with ideal reconstruction configuration. In the proposed method, the whole azimuth receiving channels are uniformly divided into multiple groups, where HRWS-SAR imaging is implemented in each sub-group and then GMTI processing is performed based on the reconstructed SAR images. Then, an optimal candidate PRF is properly selected with respect to the optimal reconstruction configuration. After that, the digital beam forming scanning on receive (DBF-SCORE) technique is applied to further enlarge the range swath and improve the noise equivalent scattering coefficient (NESZ). Based on the predesigned system, HRWS-SAR image-based GMTI processing can finally be accomplished. The effectiveness of the proposed method is validated by simulated experiments. [ABSTRACT FROM AUTHOR]

This paper investigates the airborne synthetic aperture radar via outfield experiments based on carrier-free ultra-wideband signals with fifth-order Gaussian pulses with imaging using the backward projection algorithm. Typical blanket jamming is selected in the study, and NAM, NFM, and SFM are used as jamming signals to investigate the backward projection BP imaging effect of airborne synthetic aperture radar when subjected to blanket jamming in a real-world environment. Subsequently, a variational modal decomposition algorithm is proposed, aiming at the anti-jamming processing of airborne synthetic aperture radar. Further, the variational modal decomposition algorithms are compared with the empirical modal decomposition for the anti-jamming effect, which verified the effectiveness and high efficiency of the method. This study provides a new solution for the imaging problem of airborne synthetic aperture radar when subjected to blanket jamming, and a helpful reference is provided for the selection of anti-jamming processing methods. [ABSTRACT FROM AUTHOR]

Lithium mining has become a controversial issue in the transition to green technologies due to the intervention in natural basins that impact the native flora and fauna in these environments. Large resources of this element are concentrated in Andean salt flats in South America, where extraction is much easier than in other geological configurations. The Pozuelos highland salt flat, located in northern Argentina (Salta's Province), was chosen for this study due to the presence of different evaporitic crusts and its proven economic potential in lithium-rich brines. A comprehensive analysis of a 5.5-year-long time series of its microwave backscatter with Synthetic Aperture Radar (SAR) images yielded significant insights into the dynamics of their crusts. During a field campaign conducted near the acquisition of three SAR images (Sentinel-1, ALOS-2/PALSAR-2, and SAOCOM-1), field measurements were collected for computational modeling of the SAR response. The temporal backscattering coefficients for the crusts in the salt flat are directly linked to rainfall events, where changes in surface roughness, soil moisture, and water table depth represent the most critical variables. Field parameters were employed to model the backscattering response of the salt flat using the Small Slope Approximation (SSA) model. Salt concentration of the subsurface brine and the water table depth over the slightly to moderately roughed crusts were quantitatively derived from Bayesian inference of the ALOS-2/PALSAR-2 and SAOCOM-1 SAR backscattering coefficient data. The results demonstrated the potential for subsurface estimation with L-band dual-polarization images, constrained to crusts compatible with the feasibility range of the layered model. [ABSTRACT FROM AUTHOR]

Nearshore ship detection has significant applications in both the military and civilian domains. Compared to synthetic aperture radar (SAR), polarimetric synthetic aperture radar (PolSAR) provides richer information for analyzing the scattering mechanisms of ships and enables better detection of ship targets. However, ships in nearshore areas tend to be highly concentrated, and ship detection is often affected by adjacent strong scattering, resulting in false alarms or missed detections. While the GP-PNF detector performs well in PolSAR ship detection, it cannot obtain satisfactory results in these scenarios, and it also struggles in the presence of azimuthal ambiguity or strong clutter interference. To address these challenges, we propose a nearshore ship detection method named ECD-PNF by integrating superpixel-level GP-PNF and refined polarimetric decomposition. Firstly, polarimetric superpixel segmentation and sea–land segmentation are performed to reduce the influence of land on ship detection. To estimate the sea clutter more accurately, an automatic censoring (AC) mechanism combined with superpixels is used to select the sea clutter superpixels. By utilizing refined eight-component polarimetric decomposition to improve the scattering vector, the physical interpretability of the detector is enhanced. Additionally, the expression of polarimetric coherence is improved to enhance the target clutter ratio (TCR). Finally, this paper combines the third eigenvalue of eigenvalue–eigenvector decomposition to reduce the impact of azimuthal ambiguity. Three spaceborne PolSAR datasets from Radarsat-2 and GF-3 are adopted in the experiments for comparison. The proposed ECD-PNF method achieves the highest figure of merit (FoM) value of 0.980, 1.000, and 1.000 for three datasets, validating the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Data, in deep learning (DL), are crucial to detect ships in synthetic aperture radar (SAR) images. However, SAR image annotation limitations hinder DL-based SAR ship detection. A novel data-selection method and teacher–student model are proposed in this paper to effectively leverage sparse labeled data and improve SAR ship detection performance, based on the semi-supervised oriented object-detection (SOOD) framework. More specifically, we firstly propose a SAR data-scoring method based on fuzzy comprehensive evaluation (FCE), and discuss the relationship between the score distribution of labeled data and detection performance. A refined data selector (RDS) is then designed to adaptively obtain reasonable data for model training without any labeling information. Lastly, a Gaussian Wasserstein distance (GWD) and an orientation-angle deviation weighting (ODW) loss are introduced to mitigate the impact of strong scattering points on bounding box regression and dynamically adjusting the consistency of pseudo-label prediction pairs during the model training process, respectively. The experiments results on four open datasets have demonstrated that our proposed method can achieve better SAR ship detection performances on low-proportion labeled datasets, compared to some existing methods. Therefore, our proposed method can effectively and efficiently reduce the burden of SAR ship data labeling and improve detection capacities as much as possible. [ABSTRACT FROM AUTHOR]

Detecting aircraft targets in Synthetic Aperture Radar (SAR) images is critical for military and civilian applications. However, due to SAR's special imaging mechanism, aircraft targets often consist of scattering points with large fluctuations in intensity. This often leads to the detector failing to detect weak scattering points. Not only that, previous SAR image aircraft-object-detection models have focused more on detecting and locating targets, with little emphasis on target recognition. This paper proposes a scattering-point-intensity-adaptive detection and recognition network (SADRN). In order to correctly detect the target area, we propose a Self-adaptive Bell-shaped Kernel (SBK) within the detector, which constructs a bell-shaped two-dimensional distribution centered on the target center, making the detection "threshold" for the target decrease from the center towards the periphery, reducing the missed alarms of weak scattering points at the edges of the target. To help the model adapt to multi-scale targets, we propose the FADLA-34 backbone network, aggregating information from feature maps across different scales. We also embed CBAM into the detector, which enhances the attention to the target area in the spatial dimension and strengthens the extraction of useful features in the channel dimension, reducing interference from the complex background clutter on object detection. Furthermore, to integrate detection and recognition, we introduce the multi-task head, which utilizes the three feature maps from the backbone network to generate the detection boxes and categories of the targets. Finally, the SADRN achieves superior detection and recognition performance on the SAR-AIRcraft-1.0, exceeding other mainstream methods. Visualization and analysis further confirm the effectiveness and superiority of the SADRN. [ABSTRACT FROM AUTHOR]

The LuTan-1 (LT-1) mission, China's first civilian bistatic spaceborne Synthetic Aperture Radar (SAR) mission, comprises two L-band SAR satellites. These satellites operate in bistatic InSAR strip map mode, maintaining a formation flight with an adjustable baseline to generate global digital elevation models (DEMs) with high accuracy and spatial resolution. This research introduces a dedicated interferometric calibration model for LT-1, tackling the unique challenges of the bistatic system, such as interferometric parameter coupling and the π -ambiguity problem caused by synchronization phase errors. This study validates the model using SAR images from LT-1 and Xinjiang corner reflector data, achieving interferometric phase accuracy better than 0.1 rad and baseline accuracy better than 2 mm, thereby producing high-precision DEMs with a height accuracy meeting the 5 m requirement. [ABSTRACT FROM AUTHOR]

For ultra-high-resolution (UHR) squint spotlight airborne synthetic aperture radar (SAR), the severe range-azimuth coupling caused by squint mode and the spatial and frequency dependence of the motion error brought by ultra-wide bandwidth both make it difficult to obtain satisfactory imaging results. Although some autofocus methods for squint airborne SAR have been presented in the published literature, their practical applicability in UHR situations remains limited. In this article, a new 2D wavenumber domain autofocus method combined with the Omega-K algorithm dedicated to UHR squint spotlight airborne SAR is proposed. First, we analyze the dependence of range envelope shift error (RESE) and range defocus on the squint angle and then propose a new spectrum modification strategy, after which the spectrum transforms into a quasi-side-looking one. The accuracy of estimation and compensation can be improved significantly in this way. Then, the 2D phase error can be calculated with the 1D estimated error by the mapping relationship, and after that the 2D compensation is performed in the wavenumber domain. Furthermore, the image-blocking technique and range-dependent motion error compensation method are embedded to accommodate the spatial-variant motion error for UHR cases. Simulations are carried out to verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The video synthetic aperture radar (ViSAR) system can utilize high-frame-rate scene motion target shadow information to achieve real-time monitoring of ground mobile targets. Modeling the characteristics of moving target shadows and analyzing shadow detection performance are of great theoretical and practical value for the optimization design and performance evaluation of ViSAR systems. Firstly, based on the formation mechanism and characteristics of video SAR moving target shadows, two types of shadow models based on critical size and shadow clutter ratio models are established. Secondly, for the analysis of moving target shadow detection performance in ViSAR systems, parameters such as the maximum detectable speed of moving targets, the minimum clutter backscatter coefficient, and the number of effective shadow pixels of moving targets are derived. Furthermore, the shadow characteristics of five typical airborne/spaceborne ViSAR systems are analyzed and compared. Finally, a set of simulation experiments on moving target shadow detection for the Hamas rocket launcher validates the correctness and effectiveness of the proposed models and methods. [ABSTRACT FROM AUTHOR]

This study employs the reflection symmetry decomposition (RSD) method to extract polarization scattering features from ground object images, aiming to determine the optimal data input scheme for deep learning networks in polarimetric synthetic aperture radar classification. Eight distinct polarizing feature combinations were designed, and the classification accuracy of various approaches was evaluated using the classic convolutional neural networks (CNNs) AlexNet and VGG16. The findings reveal that the commonly employed six-parameter input scheme, favored by many researchers, lacks the comprehensive utilization of polarization information and warrants attention. Intriguingly, leveraging the complete nine-parameter input scheme based on the polarization coherence matrix results in improved classification accuracy. Furthermore, the input scheme incorporating all 21 parameters from the RSD and polarization coherence matrix notably enhances overall accuracy and the Kappa coefficient compared to the other seven schemes. This comprehensive approach maximizes the utilization of polarization scattering information from ground objects, emerging as the most effective CNN input data scheme in this study. Additionally, the classification performance using the second and third component total power values (P2 and P3) from the RSD surpasses the approach utilizing surface scattering power value (PS) and secondary scattering power value (PD) from the same decomposition. [ABSTRACT FROM AUTHOR]

As miniaturization technology has progressed, Synthetic Aperture Radar (SAR) can now be mounted on Unmanned Aerial Vehicles (UAVs) to carry out observational tasks. Influenced by airflow, UAVs inevitably experience deviations or vibrations during flight. In the context of cost constraints, the precision of the measurement equipment onboard UAVs may be relatively low. Nonetheless, high-resolution imaging demands more accurate track information. It is therefore of great importance to estimate high-precision tracks in the presence of both motion and measurement errors. This paper presents a robust track estimation method for airborne SAR that makes use of both envelope and phase errors. Firstly, weak navigation information is employed for motion compensation, which reduces a significant portion of the motion error. Subsequently, the track is initially estimated using additional envelope errors introduced by the Extended Omega-K (EOK) algorithm. The track is then refined using a phase-based approach. Furthermore, this paper presents the calculation method of the compensated component for each target and provides an analysis of accuracy from both theoretical and simulation perspectives. The track estimation and imaging results in the simulations and real data experiments validate the effectiveness of the proposed method, with an estimation accuracy of real data experiments within 5 cm. [ABSTRACT FROM AUTHOR]

Accurate estimates of tropical cyclone (TC) intensity are important for improving forecasts as well as studying ocean dynamics during such extreme events. Since most cyclone life occurs over the open ocean, remote sensing techniques play an important role in obtaining the necessary data. The possibility of using the configuration of spiral signatures of mature tropical cyclones (TCs) observed in synthetic aperture radar (SAR) images to estimate the maximum wind speed of a TC is considered. This study assessed the intensity of 14 TCs in the Atlantic and Pacific Oceans using radar images obtained by the Radarsat Hurricane Application Project. TC intensity was estimated using the hyperbolic-logarithmic approximation of TC spiral signatures (HLS approximation). Additionally, the edges of the spiral signatures were partially fitted using a logarithmic spiral to improve the reliability of the HLS approximation. For the first time, a physical model of changing the crossing angle of the logarithmic portion of the edges was proposed and tested on SAR images of the TC. HLS maximum wind speed estimates were compared with Best Track estimates. The results showed the closeness of both estimates with a correlation of 0.95 and a standard deviation of 2.9 m s−1. The results indicate the possibility of using the HLS approximation to estimate the intensity of mature TCs from SAR data. [ABSTRACT FROM AUTHOR]

High-resolution wide-swath (HRWS) imaging is the research focus of the modern spaceborne synthetic-aperture radar (SAR) imaging field, with significant relevance and vast application potential. Staggered SAR, as an innovative imaging system, mitigates blind areas across the entire swath by periodically altering the radar pulse repetition interval (PRI), thereby extending the swath width to multiples of that achievable by conventional systems. However, the staggered mode introduces inherent challenges, such as nonuniform azimuth sampling and echo data loss, leading to azimuth ambiguities and substantially impacting image quality. This paper proposes a sparse SAR imaging method for the low-oversampled staggered mode via compound regularization. The proposed method not only effectively suppresses azimuth ambiguities arising from nonuniform sampling without necessitating the restoration of missing echo data, but also incorporates total variation (TV) regularization into the sparse reconstruction model. This enhances the accurate reconstruction of distributed targets within the scene. The efficacy of the proposed method is substantiated through simulations and real data experiments from spaceborne missions. [ABSTRACT FROM AUTHOR]

The array interferometric synthetic aperture radar (Array InSAR) system resolves shadow issues by employing two scans in opposite directions, facilitating the acquisition of a comprehensive three-dimensional representation of the observed scene. The point clouds obtained from the two scans need to be transformed into the same coordinate system using registration techniques to create a more comprehensive visual representation. However, the two-point clouds lack corresponding points and exhibit distinct geometric distortions, thereby preventing direct registration. This paper analyzes the error characteristics of array InSAR point clouds and proposes a robust registration method for array InSAR point clouds in urban scenes. It represents the 3D information of the point clouds using images, with pixel positions corresponding to the azimuth and ground range directions. Pixel intensity denotes the average height of points within the pixel. The KAZE algorithm and enhanced matching approach are used to obtain the homonymous points of two images, subsequently determining the transformation relationship between them. Experimental results with actual data demonstrate that, for architectural elements within urban scenes, the relative angular differences of registered facades are below 0.5°. As for ground elements, the Root Mean Square Error (RMSE) after registration is less than 1.5 m, thus validating the superiority of the proposed method. [ABSTRACT FROM AUTHOR]

The National Oceanic and Atmospheric Administration's (NOAA) Center for Satellite Applications and Research (STAR) facilitates and enables societal benefits from satellite oceanography, supporting operational and experimental satellite missions, developing new and improved ocean observing capabilities, engaging users by developing and distributing fit-for-purpose data, applications, tools, and services, and curating, translating, and integrating diverse data products into information that supports informed decision making. STAR research, development, and application efforts span from passive visible, infrared, and microwave observations to active altimetry, scatterometry, and synthetic aperture radar (SAR) observations. These efforts directly support NOAA's operational geostationary (GEO) and low Earth orbit (LEO) missions with calibration/validation and retrieval algorithm development, implementation, maintenance, and anomaly resolution, as well as leverage the broader international constellation of environmental satellites for NOAA's benefit. STAR's satellite data products and services enable research, assessments, applications, and, ultimately, decision making for understanding, predicting, managing, and protecting ocean and coastal resources, as well as assessing impacts of change on the environment, ecosystems, and climate. STAR leads the NOAA Coral Reef Watch and CoastWatch/OceanWatch/PolarWatch Programs, helping people access and utilize global and regional satellite data for ocean, coastal, and ecosystem applications. [ABSTRACT FROM AUTHOR]

Extracting water bodies from synthetic aperture radar (SAR) images plays a crucial role in the management of water resources, flood monitoring, and other applications. Recently, transformer-based models have been extensively utilized in the remote sensing domain. However, due to regular patch-partition and weak inductive bias, transformer-based models face challenges such as edge serration and high data dependency when used for water body extraction from SAR images. To address these challenges, we introduce a new model, the Superpixel-based Transformer (SPT), based on the adaptive characteristic of superpixels and knowledge constraints of the adjacency matrix. (1) To mitigate edge serration, the SPT replaces regular patch partition with superpixel segmentation to fully utilize the internal homogeneity of superpixels. (2) To reduce data dependency, the SPT incorporates a normalized adjacency matrix between superpixels into the Multi-Layer Perceptron (MLP) to impose knowledge constraints. (3) Additionally, to integrate superpixel-level learning from the SPT with pixel-level learning from the CNN, we combine these two deep networks to form SPT-UNet for water body extraction. The results show that our SPT-UNet is competitive compared with other state-of-the-art extraction models, both in terms of quantitative metrics and visual effects. [ABSTRACT FROM AUTHOR]

The Intermittent Small Baseline Subset approach to Interferometric Synthetic Aperture Radar data was originally devised as a way to recover information from regions with intermittent coherence, making it particularly useful in agricultural regions or those featuring significant vegetation. However, as modern data products grow in size, the increased computational complexity that this methodology demands makes processing more daunting. Here, we present a solution: leveraging the Bifrost data processing framework and GPUs, we analyze Sentinel-1 data covering a large region of northern California and are able to achieve dramatic speed-ups on the order of 300–400 times faster than CPU-bound implementations of ISBAS, processing the entire dataset in only 5 h. [ABSTRACT FROM AUTHOR]

In recent years, the Ningbo Plain has experienced significant surface subsidence due to urbanization and industrialization, combined with the area's unique geological and hydrological conditions. To study the surface subsidence and its causes in the Ningbo Plain, this study analyzed 166 scenes of Sentinel-1A SAR images between January 2018 and June 2023. The time series interferometric synthetic aperture radar (TS-InSAR) technique was used to acquire surface subsidence information in the area. The causes of subsidence were analyzed. The results show that: (1) the annual deformation rate of the Ningbo Plain ranges from −44 mm/yr to 12 mm/yr between 2018 and 2023. A total of 15 major subsidence zones were identified by using both the subsidence rate map and optical imagery. The most severe subsidence occurred in the northern industrial park of Cixi City, with a maximum subsidence rate of −37 mm/yr. The study reveals that the subsidence issue in the main urban area has been significantly improved compared to the 2017 subsidence data from the Ningbo Bureau of Natural Resources and Planning. However, three new subsidence areas have emerged in the main urban area, located, respectively, in Gaoqiao Town, Lishe Town, and Qiuyi Village, with maximum rates of −29 mm/year, −24 mm/year, and −23 mm/year, respectively. (2) The causes of subsidence were analyzed using various data, including land use data, geological data, groundwater-monitoring data, and transportation network data. It is found that a strong link exists between changes in groundwater levels, compressible layer thickness, and surface subsidence. The groundwater levels changes and the soft soil layer thickness are the main natural factors causing subsidence in the Ningbo Plain. Additionally, the interaction between static loads from large-scale industrial production and urban construction, along with the dynamic loads from transportation networks, contribute significantly to surface subsidence in the Ningbo Plain. The results from this study enhance the understanding of the driving factors of subsidence in the Ningbo Plain, which can provide necessary guidance for the economic development and decision-making in the region, helping to manage and potentially mitigate future subsidence issues. [ABSTRACT FROM AUTHOR]

To date, various methods have been proposed for calibrating polarimetric synthetic aperture radar (SAR) using distributed targets. Some studies have utilized the covariance matching estimation technique (Comet) for SAR data calibration. However, practical applications have revealed issues stemming from ill-conditioned problems due to the analytical solution in the iterative process. To tackle this challenge, an improved method called Comet IS is introduced. Firstly, we introduce an outlier detection mechanism which is based on the Quegan algorithm's results. Next, we incorporate an initial search approach which is based on the interior point method for recalibration. With the outlier detection mechanism in place, the algorithm can recalibrate iteratively until the results are correct. Simulation experiments reveal that the improved algorithm outperforms the original one. Furthermore, we compare the improved method with Quegan and Ainsworth algorithms, demonstrating its superior performance in calibration. Furthermore, we validate our method's advancement using real data and corner reflectors. Compared with the other two algorithms, the improved performance in crosstalk isolation and channel imbalance is significant. This research provides a more reliable and effective approach for polarimetric SAR calibration, which is significant for enhancing SAR imaging quality. [ABSTRACT FROM AUTHOR]

The Copernicus Sentinel-6 Michael Freilich (S6-MF) and Jason-3 (J3) Tandem Experiment (S6-JTEX) provided over 12 months of closely collocated altimeter sea state measurements, acquired in "low-resolution" (LR) and synthetic aperture radar "high-resolution" (HR) modes onboard S6-MF. The consistency and uncertainties associated with these measurements of sea state are examined in a region of the eastern North Pacific. Discrepancies in mean significant wave height (Hs, 0.01 m) and root-mean-square deviation (0.06 m) between J3 and S6-MF LR are found to be small compared to differences with buoy data (0.04, 0.29 m). S6-MF HR data are found to be highly correlated with LR data (0.999) but affected by a nonlinear sea state-dependent bias. However, the bias can be explained robustly through regression modelling based on Hs. Subsequent triple collocation analysis (TCA) shows very little difference in measurement error (0.18 ± 0.03 m) for the three altimetry datasets, when analysed with buoy data (0.22 ± 0.02 m) and ERA5 reanalysis (0.27 ± 0.02 m), although statistical precision, limited by total collocations (N = 535), both obscures interpretation and motivates the use of a larger dataset. However, we identify uncertainties in the collocation methodology, with important consequences for methods such as TCA. Firstly, data from some commonly used buoys are found to be statistically questionable, possibly linked to erroneous buoy operation. Secondly, we develop a methodology based on altimetry data to show how statistically outlying data also arise due to sampling over local sea state gradients. This methodology paves the way for accurate collocation closer to the coast, bringing larger collocation sample sizes and greater statistical robustness. [ABSTRACT FROM AUTHOR]

The integration of Synthetic Aperture Radar (SAR) imaging technology with deep neural networks has experienced significant advancements in recent years. Yet, the scarcity of high-quality samples and the difficulty of extracting prior information from SAR data have experienced limited progress in this domain. This study introduces an innovative sparse SAR imaging approach using a self-supervised non-local asymmetric pixel-shuffle blind spot network. This strategy enables the network to be trained without labeled samples, thus solving the problem of the scarcity of high-quality samples. Through asymmetric pixel-shuffle downsampling (AP) operation, the spatial correlation between pixels is broken so that the blind spot network can adapt to the actual scene. The network also incorporates a non-local module (NLM) into its blind spot architecture, enhancing its capability to analyze a broader range of information and extract more comprehensive prior knowledge from SAR data. Subsequently, Plug and Play (PnP) technology is used to integrate the trained network into the sparse SAR imaging model to solve the regularization term problem. The optimization of the inverse problem is achieved through the Alternating Direction Method of Multipliers (ADMM) algorithm. The experimental results of the unlabeled samples demonstrate that our method significantly outperforms traditional techniques in reconstructing images across various regions. [ABSTRACT FROM AUTHOR]

Three-dimensional SAR imaging of urban buildings is currently a hotspot in the research area of remote sensing. Synthetic Aperture Radar (SAR) offers all-time, all-weather, high-resolution capacity, and is an important tool for the monitoring of building health. Buildings have geometric distortion in conventional 2D SAR images, which brings great difficulties to the interpretation of SAR images. This paper proposes a novel Rotating SAR (RSAR) mode, which acquires 3D information of buildings from two different angles in a single rotation. This new RSAR mode takes the center of a straight track as its rotation center, and obtains images of the same facade of a building from two different angles. By utilizing the differences in geometric distortion of buildings in the image pair, the 3D structure of the building is reconstructed. Compared to the existing tomographic SAR or circular SAR, this method does not require multiple flights in different elevations or observations from varying aspect angles, and greatly simplifies data acquisition. Furthermore, both simulation analysis and actual data experiment have verified the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

To address the challenge of achieving both temporal consistency and spatial continuity in Earth observation data of polar regions, this paper proposes an innovative concept of Moon-based/Highly Elliptical Orbit (HEO) Spaceborne Bistatic Synthetic Aperture Radar (MH-BiSAR), with transmitters on the Moon and receivers on HEO satellites. By utilizing ephemeris data and an orbit propagator, this study explores MH-BiSAR's geometric coverage capabilities in polar regions and conducts a preliminary analysis of its characteristics. The findings reveal that MH-BiSAR could provide continuous multi-day revisit observations of polar regions within each sidereal month, presenting a significant advantage for monitoring high-dynamic and large-scale scientific phenomena, such as polar sea ice observations. This innovative observational method offers a new perspective for polar monitoring and is expected to deepen our understanding of polar phenomena. [ABSTRACT FROM AUTHOR]

Improving the accuracy of zenith tropospheric delay (ZTD) models is an important task. However, the existing ZTD models still have limitations, such as a lack of appropriate vertical adjustment function and being unsuitable for China, which has a complex climate and great undulating terrain. A new approach that considers the time-varying vertical adjustment and delicate diurnal variations of ZTD was introduced to develop a new grid ZTD model (NGZTD). The NGZTD model employed the Gaussian function and considered the seasonal variations of Gaussian coefficients to express the vertical variations of ZTD. The effectiveness of vertical interpolation for the vertical adjustment model (NGZTD-H) was validated. The root mean squared errors (RMSE) of the NGZTD-H model improved by 58% and 22% compared to the global pressure and temperature 3 (GPT3) model using ERA5 and radiosonde data, respectively. The NGZTD model's effectiveness for directly estimating the ZTD was validated. The NGZTD model improved by 22% and 31% compared to the GPT3 model using GNSS-derived ZTD and layered ZTD at radiosonde stations, respectively. Seasonal variations in Gaussian coefficients need to be considered. Using constant Gaussian coefficients will generate large errors. The NGZTD model exhibited outstanding advantages in capturing diurnal variations and adapting to undulating terrain. We analyzed and discussed the main error sources of the NGZTD model using validation of spatial interpolation accuracy. This new ZTD model has potential applications in enhancing the reliability of navigation, positioning, and interferometric synthetic aperture radar (InSAR) measurements and is recommended to promote the development of space geodesy techniques. [ABSTRACT FROM AUTHOR]

This paper presents a statistical approach to identify the underlying roughness characteristics in synthetic aperture radar (SAR) intensity data. The physical modeling of this kind of data allows the use of the Gamma distribution in the presence of fully developed speckle, i.e., when there are infinitely many independent backscatterers per resolution cell, and none dominates the return. Such areas are often called "homogeneous" or "textureless" regions. The G I 0 distribution is also a widely accepted law for heterogeneous and extremely heterogeneous regions, i.e., areas where the fully developed speckle hypotheses do not hold. We propose three test statistics to distinguish between homogeneous and inhomogeneous regions, i.e., between gamma and G I 0 distributed data, both with a known number of looks. The first test statistic uses a bootstrapped non-parametric estimator of Shannon entropy, providing a robust assessment in uncertain distributional assumptions. The second test uses the classical coefficient of variation (CV). The third test uses an alternative form of estimating the CV based on the ratio of the mean absolute deviation from the median to the median. We apply our test statistic to create maps of p-values for the homogeneity hypothesis. Finally, we show that our proposal, the entropy-based test, outperforms existing methods, such as the classical CV and its alternative variant, in identifying heterogeneity when applied to both simulated and actual data. [ABSTRACT FROM AUTHOR]