Search

This paper evaluates the γ-radiation shielding traits of some new types of borate glasses of composition (70–x)B 2 O 3 –10Bi 2 O 3 –10BaO–10CdO–xPbO (where 0 ≤ x ≤ 20 mol%) prepared using melt quenching method. As-quenched samples were characterized to determine the effects of various PbO contents on their γ-radiation shielding properties. XRD patterns of the samples verified their amorphous nature. The Phy-X and XCOM was used to compute the mass attenuation coefficients of the glasses and then compared with the experimental data. The γ-radiation shielding performance of the proposed glasses were evaluated in terms of diverse attenuation parameters like mean free path, half and tenth value layer, atomic cross-section, electronic cross-section, effective atomic number and effective electron density. The γ-radiation shielding performance of the glasses were significantly improved with the increase of PbO contents. This new borate glass system is established to be advantageous for the radiation shielding applications. • The borate glass samples with different PbO content were prepared by the standard melt-quenching method. • The μ/ρ values of the glasses were increased with the increase of the PbO content. • The relatively higher Zeff at lower energies due to the dominance of PE effect. • Promising HVT and TVL achieved with the new prepared glasses. • The proposed glass improves the efficiency of IR shielding material. [ABSTRACT FROM AUTHOR]

Polylactic acid (PLA) is a biodegradable organic acid of polymeric chain that has as chemical structure the monomer C 3 H 4 O 2 and it is one of the most used materials in rapid prototyping among 3D printers. Due to the ease of manufacturing PLA parts and because of its low atomic number, PLA can be used as holder to radiation source and detectors to establish fixed geometries in experiments using gamma radiation, hence the importance in knowing more about PLA characteristics. In this way, the novelty of this paper is to determine the mass attenuation coefficient of 3D printed PLA samples using gamma densitometry. A mathematical model was developed using MCNPX code and consisted of a PLA sample, a NaI(Tl) detector and gamma rays of 661.6 keV as radiation source (narrow beam). The mathematical model was experimentally validated using the same geometry and a lead collimator. Besides that, PLA weight fractions and density were also determined in order to use this information as input data in the MCNPX code. The obtained mass attenuation coefficients were in good agreement with the NIST theoretical reference value, presenting relative errors of 0.99% (MCNPX) and 2.00% (experimental). The proposed methodology was repeated replacing PLA for aluminum samples and comparing its results with NIST. In addition, the mass attenuation coefficient for some polymers was calculated using this model aiming to validate the geometry developed with MCNPX code. • Simulation of mass attenuation coefficients using MCNPX code. • Absorber material are 3D printed polylactic acid samples. • Experimental validation of the methodology using gamma densitometry. • Simulation of others absorber materials. [ABSTRACT FROM AUTHOR]