Search

The deflector and the rod bank are commonly used to optimize flue gas distribution in the original spray tower (OST) of a wet flue gas desulfurization system (WFGD). In this paper, the internal optimization mechanism of the deflector desulfurization spray tower (DST) and the rod bank desulfurization spray tower (RBST) are studied. Based on the Euler–Lagrange method, the standard k-ε turbulence model, an SO2 absorption model and a porous media model, the numerical simulation of the desulfurization spray tower is carried out with the verification of the model rationality. The results show that there are gas-liquid contact intensification effects in DST and RBST. Compared with OST, gas-liquid contact intensification enhances the heat and mass transfer effects of DST and RBST. The temperature difference between inlet and outlet of flue gas increased by 3.3 K and the desulfurization efficiency of DST increased by 1.8%, the pressure drop decreased by 37 Pa. In RBST, the temperature difference between the flue gas inlet and outlet increased by 5.3 K and the desulfurization efficiency increased by 3.6%, the pressure drop increased by 33 Pa.

Industrial hydraulic turbines, a kind of small-scaled turbine in a more compact and flexible application, are frequently used in hydrogen cracking, synthesis ammonia, and circulating water field. Besides the energy recovery efficiency, the working stability at variable speed situations is a critical issue, since its rotation speed changes with the flow parameters of the upstream. In this paper, a conventional turbine was numerically investigated under three different rotation speeds and its best efficiency points (BEPs). The velocity profiles, blade load, pressure fluctuation, and vibration features were discussed to form a comprehensive evaluation of turbine stability. The numerical results were validated through turbine external characteristic and vibration tests. The results indicate that the pressure pulsation and vibrations increase when it deviates from the rated rotation speed, but the relatively low flowrate point behaves better than the large point in the aspect of turbine stability, the main reasons are the angle of incidence and rotor circumferential vortex. The conclusions can provide significant reference for turbine hydraulic optimization and engineering application.

A three-dimensional numerical study of a single droplet splashing vertically on a liquid film is presented. The numerical method is based on the finite volume method (FVM) of Navier–Stokes equations coupled with the volume of fluid (VOF) method, and the adaptive local mesh refinement technology is adopted. It enables the liquid–gas interface to be tracked more accurately, and to be less computationally expensive. The relationship between the diameter of the free rim, the height of the crown with different numbers of collision Weber, and the thickness of the liquid film is explored. The results indicate that the crown height increases as the Weber number increases, and the diameter of the crown rim is inversely proportional to the collision Weber number. It can also be concluded that the dimensionless height of the crown decreases with the increase in the thickness of the dimensionless liquid film, which has little effect on the diameter of the crown rim during its growth.