Search

For equine-assisted therapy, a bionic horse configuration is presented. A bionic horse's single leg system has two degrees of freedom (DOFs), which is driven by a cam-linkage mechanism and can adjust the leg's endpoint trajectory. Based on analyzing the motion law of the bionic horse and the foot trajectory's requirements of the leg system, a multi-objective optimization model is established based on the foot trajectory performance index. To determine the objective function, the errors between the ideal foot trajectory and the mechanism motion model's foot trajectory, and the errors between the actual adjustable values and the target values for the motion range are taken as the optimization objective. In terms of the constraint conditions, the structural constraints, kinematic feasible region conditions, pressure angle requirements, et al., are considered. The ideal mechanism parameters are obtained by the intelligent optimization method. The results are verified by simulation modeling and experimental prototype, and the relevant ideas can provide a reference for the research of similar problems. [ABSTRACT FROM AUTHOR]

In this paper, a cam-linkage mechanism with a swing follower with variable pivot has been studied. In this mechanism, the pivot of the swing follower is installed on a slider with an adjustable track direction, the follower performs a complex planar motion, and the motion range of the output angle can be adjusted according to the output requirements. In order to synthesize this mechanism, firstly, the relevant model is established and the basic structural parameters are optimized by considering the assembly conditions and the pressure angle under the limit position of the movement track of the follower mounting slider. Subsequently, the inverse method and the envelope theory are employed to derive the cam contour coordinates. Finally, the corresponding follower motion law is selected, the corresponding cam contour coordinates are calculated, and the entire cam contour curve is obtained using spline interpolation. An automatic design system for cam contours is developed. The processes are carried out through design examples and verified through motion simulations and prototype experiment. The present work can enrich the design theory of cam-linkage mechanisms. [ABSTRACT FROM AUTHOR]